Digital Water Depth Processing For Multibeam Based On Average Slope Of Terrain,
2020
1. Department of Electronics and Information Engineering, North China Institute of Science and Technology, Langfang 065201, China;;
Digital Water Depth Processing For Multibeam Based On Average Slope Of Terrain, Jiacheng Yu, Xueqiang Xu
Journal of System Simulation
Abstract: According to the characteristic of multibeam bathymetry in which measurement depth is influenced by terrain, revision algorithm was proposed based on average slope along the horizontal and vertical terrain. Five depth revision factors were obtained, and a depth smooth template was designed. The initial scan depth data were revised by the 5 revision factors, and then the revised depth data were filtered by the template. Simulation results show that, the depth of measurement error can be reduced greatly after revision, the designed template relative to the conventional Gauss template has higher smooth precision, more adapted to the water …
Research Of Noise Mitigation Method Based On Dspwvd-Tfpf In Communication System,
2020
Department of Electrical and Electronic Engineering, North China Electric Power University, Beijing 102206, China;
Research Of Noise Mitigation Method Based On Dspwvd-Tfpf In Communication System, Lingdong Su, Mingyue Zhai
Journal of System Simulation
Abstract: In the case of low SNR, the quality of the communication system will be decreased and the traditional TFPF on time-frequency clustering and noise suppression will descend. In order to overcome these, a new family of TF distribution, namely, the joint directionally smoothing Wigner-Ville distribution was presented to achieve instantaneous frequency estimation. This new TF distributions is based on the definition of the directionally smoothed pseudo Wigner-Ville distribution (DSPWVD) and point wise adaptive weight averaging of a bank of DSPWVD with different directions. The simulation shows that at low SNR, compared to traditional TFPF, DSPWVD-TFPF algorithm can better …
Construction Of Virtual Atmospheric Environment Based On Mm5 And Sedris,
2020
Dept. of Automatic Test and Control, Harbin Institute of Technology, Harbin 150001, China;
Construction Of Virtual Atmospheric Environment Based On Mm5 And Sedris, Lianlei Lin, Ding Wei
Journal of System Simulation
Abstract: The new virtual test for virtual atmosphere environment puts forward higher requirements, such as providing complex atmospheric environment which includes a variety of atmospheric parameters and improving usability and reusability of atmospheric environment data. A method to construct virtual atmospheric environment based on MM5 and SEDRIS was proposed which met the above demands. The original data of complex atmospheric environment in any region and scale was generated by using MM5 model. According to the characteristics as well as the dynamic relationship between time and space of grid of atmospheric data, SEDRIS was selected to regulate appropriate DRM class, SRF …
Study On Equipment Domain Ontology Construction For Integration Of Data Semantics,
2020
Science and Technology on Complex Electronic System Simulation Laboratory, The Academy of Equipment, Beijing 101416, China;
Study On Equipment Domain Ontology Construction For Integration Of Data Semantics, Li Kang, Xinming Li, Liu Dong
Journal of System Simulation
Abstract: Equipment domain ontology could accurately describe definition of concepts in the field and the relationships between the concepts, which is foundation and prerequisite in semantic integration of equipment data. With the analysis of the existing methods, a semi-automatic domain ontology construction method was proposed. The top-level domain ontology was built under the standard of authoritative documents in the equipment field. An initial partial ontology was generated from the equipment database by mapping. The ontology was standardized through mapping process. The results of the experiment show that this method can build equipment domain ontology which provides a unified global …
Large Eddy Simulation Of Effect Of Geometric Parameters On Low Pressure Of Turbulent Flow Over Gate Slot,
2020
1. Faculty of Electric Power Engineering, Kunming University of Science & Technology, Kunming 650500, China;;
Large Eddy Simulation Of Effect Of Geometric Parameters On Low Pressure Of Turbulent Flow Over Gate Slot, Shihua He, Lixiang Zhang
Journal of System Simulation
Abstract: The turbulent flow over the hydraulic plane gate slot was studied using large eddy simulation method. The effects of geometric parameters including width-to-depth ratio, stagger ratio, slope ratio and fillet ratio on hydraulic characteristics within and near the gate slot were simulated systematically. According to the vulnerable cavitation locations of the flow over the slot, the pressure distributions in swirl area and the separation zone at the rear of downstream corner of the slot were investigated emphatically. The results show that the effects of width-to-depth ratios and stagger ratios on the pressure distribution of the flow are significantly. …
Launch Dynamic Characteristics Simulation Analysis Of Vehicular Gatling Gun In Different Road Surface,
2020
1. Ordnance Engineering College, Shijiazhuang 050003, China;;
Launch Dynamic Characteristics Simulation Analysis Of Vehicular Gatling Gun In Different Road Surface, Junnuo Zhang, Ruilin Wang, Li Tao, Binbin Hua
Journal of System Simulation
Abstract: To study the influence of firing accuracy on a certain vehicular Gatling gun in different road surface, a rigid-flexible coupling multi-body dynamic simulation model was established based on virtual prototyping technology. Considering the interaction relations between the tires and road surface, vehicle and machine gun, the vehicle vibration characteristics and the muzzle response characteristics and vertical-target dispersion were obtained by analyzing the machine gun system in different road surface. The influence of road surface on fire accuracy was demonstrated by contrasting and analyzing the simulation curves. The study results have provided a theoretical support and direction …
Design Of Iaas Mode “Cloud Training” System,
2020
Department of Electronic and Optics, Ordnance Engineering College, Shijiazhuang 050003, China;
Design Of Iaas Mode “Cloud Training” System, Zhijia Chen, Yuanchang Zhu, Yanqiang Di, Shaochong Feng
Journal of System Simulation
Abstract: There are some problems in equipment web simulating training, including poor sense of reality, low efficiency of training and high difficulty of management. To solve those problems, Infrastructure as a Service mode “cloud training” was proposed. The architecture and operation flow were explained in detail and the key technologies of “cloud training” were focused on. By GPU virtualization technology, the problem of client 3D image processing capability was solved. According to the characters of simulation training, the user requirement model was established. Fuzzy algorithm was introduced to realize resource dynamic scheduling. To assure the stability and reliability, …
Decision Strategy Models Of Merge Influence Area For Outside Vehicles Based On Vehicle-Vehicle Communication,
2020
1. Department of Transportation Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;;
Decision Strategy Models Of Merge Influence Area For Outside Vehicles Based On Vehicle-Vehicle Communication, Xiaofang Yang, Guo Qian, Fu Qiang
Journal of System Simulation
Abstract: In the on-ramp merging area, appropriate driving decisions should be made by observing the running environment and estimating the driving characteristics of the surrounding vehicles, which usually led to the inordinate traffic flow. To solve this problem, the decision strategy models were built for vehicles in the on-ramp merging area, and the operating rules for the new decision strategy were updated. Furthermore, the space-time trajectory, the lane changing in merging and upstream area and the average speed in the two different circumstances were analyzed by numerical experiments. The results show that in the condition of vehicle-vehicle communication environment, …
Study On Simulation Of Turning Burr Formation Based On Finite Element Method,
2020
1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China;;
Study On Simulation Of Turning Burr Formation Based On Finite Element Method, Yunming Zhu, Jingui Huang, Guicheng Wang, Chen Yun
Journal of System Simulation
Abstract: According to the relative motion of tool and workpiece, a new mechanical-thermal coupling finite element model of turning burr formation was established. It adopted supporting plate method to eliminate the influence of workpiece deformation which remained on the workpiece side. Operational efficiency improved greatly under this model. Based on the analysis of simulation results, it is discovered that there are both bending deflection and partly cutting occurred on cutting layer material. AISI1045 steel turning experiment was conducted, it is found that the results of simulation are close to the experimental. The model provides an effective way for analyzing the …
Research Of Marshalling Yard Dispersion Based On Simulation In Container Terminal,
2020
1. School of Economics & Management, Shanghai Maritime University, Shanghai 201306, China;;
Research Of Marshalling Yard Dispersion Based On Simulation In Container Terminal, Yu Hang, Le Meilong
Journal of System Simulation
Abstract: As development of the precision management in the container terminal, close attention was paid to the research on the optimization of the marshalling yard template. The new concept called the yard dispersion in the container yard template was proposed and the professional simulation software Flexsim-CT was used to build a container handling simulation model which includes berth, quay crane, yard scheduling, yard crane, and trucks. The impact of the different yard dispersion on the total handling time and the efficiency of the quay crane under varying service burden was analyzed. The case study combines the simulation model with …
Optimization Design For A New Type Throttle Valve Of Managed Pressure Drilling Based On Response Surface Methodology,
2020
1. College of Mechanical and Electrical Engineering Southwest Petroleum University, Chengdu 610500, China;;
Optimization Design For A New Type Throttle Valve Of Managed Pressure Drilling Based On Response Surface Methodology, Guorong Wang, Chu Fei, Hongkang Fan, Siyu Tao, Zhu Hao, Jiang Long
Journal of System Simulation
Abstract: The Kriging response surface of single parameter and double parameters versus mass loss of valve spool about bonnet length, bonnet external radius and chamber inner radius of a new type throttle valve used in Managed Pressure Drilling was carried out by using CFX and ANSYS-Design Exploration. The results show that these dimensions have significant influence on erosion mass loss of valve spool. In order to improve the anti-erosion ability of the spool and enhance the service life of the whole valve, the multi-objective genetic algorithm was used for dimensional optimization design of the mentioned variables. After optimization …
Paralleling Simulation Of Operation Plan Based On Decision Point Controlling,
2020
IO and Command Training Dept., National Defense University, Beijing 100091, China;
Paralleling Simulation Of Operation Plan Based On Decision Point Controlling, Zhanguang Cao, Pinggang Yu, Kuo Wang
Journal of System Simulation
Abstract: Operation plan simulation traditionally uses serial and static method. It can't be fulfilled for the military need of swift simulation and real-time decision in the modern complicated and dynamically battle field. So, the higher complexity and dynamical decision according to situation of the operation plan bring new challenge to the simulation. Operation Plan Paralleling Simulation Based on Decision Point Controlling (P2SDPC) can realize the operation plan's dynamic adjusting and cutting impossible branch based on decision point controlling technology. From then on, the efficiency of operation plan's simulation could be improved by the way of paralleling simulation. Thus the problem …
Model And Simulation Of Virtual Character Based On Real-Time Sensor Data-Driven,
2020
1. Lab of Virtual Reality, South China Agricultural University, Guangzhou 510642, China;;2. Mechanical Engineering College, Tianjin University of Technology and Education, Tianjin 300222, China;
Model And Simulation Of Virtual Character Based On Real-Time Sensor Data-Driven, Lufeng Luo, Xiangjun Zou, Zhang Cong, Xie Lei
Journal of System Simulation
Abstract: The real-time control of virtual character behavior is a challenge in simulating virtual exercise. A kind of virtual character running behavior control method based on real-time data-driven was proposed, the real-time data acquisition with the help of sensor was expounded, the time-series law of human body running was analyzed, the human body posture mathematics expression was modeled, and a limb movement parts and rotation degrees of freedom computing model was proposed. By use of rotation angle method, the space and time relationship of each part of human movement chains was established and the movement process frame when moving was …
Method For Auto-Generating Cartoon Based On A Set Of Portrait Dictionary,
2020
1. School of Film and TV Arts and Technology, Shanghai University, Shanghai 200072, China;;
Method For Auto-Generating Cartoon Based On A Set Of Portrait Dictionary, Jingjing Sun, Jiajun Yu, Li Bei, Zhifeng Xie, Youdong Ding
Journal of System Simulation
Abstract: An efficient method of auto-generating portrait cartoon based on true portrait pictures was proposed. The first step was to establish a set of portrait dictionary. As a result, the portrait was divided into six components including eyebrows, eyes, nose, mouth, face, hair, so that the material library of cartoon corresponding to each component could be established. The next was to collect some real portrait images and synthesize them using the component material, meanwhile to calculate the facial shape features and the texture features of hair corresponding to each portrait. The second step was to input a real portrait image …
Neural Network Model Of Information Fusion For Coal Storage And Kinetic Energy Of Ball Mill,
2020
School of Control and Computer Engineering, North China Electric Power University, Beijing 102206, China;
Neural Network Model Of Information Fusion For Coal Storage And Kinetic Energy Of Ball Mill, Bai Yan, He Fang
Journal of System Simulation
Abstract: A dynamic mathematical model of coal pulverizing system was analyzed. Simulation experiments on mill operation process were conducted by PFC3D software platform based on discrete element method. The associated data between different coal quality, coal storage and balls' motion were obtained under certain quantitative optimized operating parameters configuration. Neural network model of information fusion for coal storage and kinetic energy of ball mill was established by using an adaptive combination learning algorithm. Coal storage in mill cylinder was predicted from the energy point of view. The results indicate that there is a close relationship between coal storage, pulverizing efficiency …
Modeling Of High-Speed Railway Operation Informational Interaction Process Using Oopn,
2020
1. School of Transportation & Logistics, Southwest Jiaotong University, Chengdu 610031, China;;2. National United Engineering Laboratory of Integrated and Intelligent Transportation, Chengdu 610031, China;
Modeling Of High-Speed Railway Operation Informational Interaction Process Using Oopn, Liping Feng, Qiyuan Peng, Wen Chao
Journal of System Simulation
Abstract: High-speed railway transportation is an informational interaction process involving multi-levels and multiple subsystems. The majority of the present study focuses on the local system, causing some limitations to the overall control of high-speed rail traffic command. The high-speed railway operation process covering traffic control subsystem, train control subsystem, computer interlocking subsystem were researched with the key point of information interaction. Then the future directions were proposed, modeling and application respectively, which could remind of the deepen research on high-speed railway operation. Based on OOPN, the HTOIIP model with the formalized definition was built.
Application Of Domain Knowledge Representation In Simulation Tutoring For Weapon Utilization,
2020
1. Troop 66459, Beijing 102202, China;;2. College of Information Systems and Management, National University of Defense Technology, Changsha 410073, China;
Application Of Domain Knowledge Representation In Simulation Tutoring For Weapon Utilization, Zhang Chi, Danhua Peng, Kedi Huang
Journal of System Simulation
Abstract: According to the requirements and characteristics of the simulation tutoring system for weapon utilization, a knowledge base depending on the domain ontology was designed. The knowledge for weapon utilization, the knowledge representation, and the method of knowledge representation were introduced. Through a combination of the ontology technology and various existing models, the key points of using specific weapon could be mastered by processing the date, information, and experience from expert. The conceptual model of knowledge was built. A knowledge base for weapon utilization was designed and implemented. The structure and function of the simulation tutoring system and rule-based expert …
Method For Auto-Detection Of Tracking Moving Objects In Complicated Dynamic Environment,
2020
1. College of Computer and Information, Luoyang Normal University, Luoyang 471022, China;;
Method For Auto-Detection Of Tracking Moving Objects In Complicated Dynamic Environment, Yanling Wang, Guanglun Li, Lin Xiao
Journal of System Simulation
Abstract: An approach was proposed to solve the problem of not accurately identifying the moving targets in the complex dynamic environment. The moving objects were detected by utilizing the method based on the HSV color space and auto-updating the background. The background subtraction method based on the HSV color space was used to solve the problem that the objects could not be accurately identified for the color similarity of objects and background and the influence of the shadow of the moving targets. The background change was divided into the temporary stability and the rapid change, and an automatically updating double …
Robust Image Cloning With Color Harmonization,
2020
1. School of Film and TV Arts and Technology, Shanghai University, Shanghai 200072, China;;
Robust Image Cloning With Color Harmonization, Li Bei, Wang Hao, Jiajun Yu, Zhifeng Xie, Youdong Ding
Journal of System Simulation
Abstract: Image cloning has always been an important part of image editing. In general, it can be divided into three methods, based on a component, based on gradient domain, and based on coordinate respectively, but the color discordant and boundary distortion problems have not been well solved. In order to solve the color discordant problem in the method based on mean value coordinate, a method of image cloning was proposed based on local affinity propagation. The affinity considered the location information of pixels, color information, background information comprehensively, thus it could ease the color discordant and reach color harmonization. The …
Multi-Objective Cuckoo Search Algorithm,
2020
1. School of Science, Xi'an Polytechnic University, Xi'an 710048, China;;
Multi-Objective Cuckoo Search Algorithm, Xingshi He, Li Na, Xinshe Yang, Yu Bing
Journal of System Simulation
Abstract: It is challenging to solve multi-objective optimization problems with getting high-quality Pareto fronts accurately. The multi-objective Cuckoo Search algorithm (MOCS) was designed by firstly applying the recently developed Cuckoo Search Algorithm (CS) in solving Multi-objective optimization problems, and the fitness function based Pareto definiteness was improved, and the Gradual archive reduction method based on niche technology was proposed to improve the Archive solutions quality. The simulation test results and related performance indicators of nine test problems show that, MOCS algorithm is obviously improved in the aspect of the convergence, the diversity and the uniformity compared with the classic NSGA-II …
