Wind Speed Noise Reduction In Wind Farm Based On Variational Mode Decomposition,
2019
Jiangnan University, Wuxi 214122, China;
Wind Speed Noise Reduction In Wind Farm Based On Variational Mode Decomposition, Xinghua Xu, Tinglong Pan, Dinghui Wu
Journal of System Simulation
Abstract: Wind power forecast is based on the existing data, and the wind speed data in wind power are mixed with different types of noise. In order to improve the precision of prediction, noise reduction is needed. However, the traditional empirical mode decomposition noise reduction method has the phenomenon of mode mixing. To improve the effect of the noise reduction, a kind of noise reduction method based on variational mode decomposition is proposed. The variational mode decomposition is a new method which has good noise immunity and no mode mixing. To thoroughly research the application of variational mode decomposition …
Predictive Control For Permanent Magnet Synchronous Motor Based On Imc Observer,
2019
School of Electrical and Control Engineering, Liaoning Technical University, Huludao 125105, China;
Predictive Control For Permanent Magnet Synchronous Motor Based On Imc Observer, Zhiling Ren, Zhongbao Zhang, Limin Hou, Guangquan Zhang, Lin Dong, Zhao Xing
Journal of System Simulation
Abstract: Predictive control strategy is applied to permanent magnet synchronous motor control system, it can achieve fast dynamic response and high-precision tracking control, but depending on the mathematical model of the motor, the load disturbance will affect the control performance of system. A new control method combining an observer based on internal model control (IMC) and predictive control was presented. The inner-loop current controller and the outer-loop speed controller based separately on model predictive control algorithm and deadbeat current predictive control algorithm were designed to form dual-loop predictive control system. An IMC observer is designed to estimate the load disturbance, …
Active Disturbance Rejection Sliding Mode Control For Time-Delay Systems,
2019
School of Automation Engineering, Qingdao University of Technology, Qingdao 266520, China;
Active Disturbance Rejection Sliding Mode Control For Time-Delay Systems, Suzhen Wang, Guofa Sun, Shengrong Liu
Journal of System Simulation
Abstract: Aiming at the time-delay systems with uncertainty, this paper designs a third-order nonlinear feedback extended state observer (ESO) by using the coordinate transformation. The ESO can estimate both the system states and the total disturbance signal, and the nonlinear feedback has fast convergence. By the first-order approximation of the time-delay, the output feedback control problem of the time-delay system is transformed into controlling the second-order nonlinear uncertain system with unknown function. On the basis of the tracking differentiator (TD) and the designed ESO, the second-order sliding mode controller (SMC) is designed to realize the fast and accurate tracking …
Process Simulation And Optimization On Giant Block Erection Of Longitudinal Staggered Arrangement,
2019
1.Institute of Intelligent Manufacturing and Information Engineering, Shanghai Jiaotong University, Shanghai 200240, China; ;
Process Simulation And Optimization On Giant Block Erection Of Longitudinal Staggered Arrangement, Wenmin Zhu, Minghua Zhu, Xiumin Fan
Journal of System Simulation
Abstract: The process of giant block erection of longitudinal staggered arrangement is complicated. If the design of process and tooling are not reasonable, the adjustment work in the construction site, which affects the shipbuilding cycle seriously, will be abundant. To solve these problems, the method of process simulation and optimization on giant block erection were researched. Simulation models were established for carrying out the process simulation, and the simulation process was detected in real time by establishing collision detection model and virtual human model. Based on the measured data of the ship hull, the automatic calculation method of raising height …
Distribution Routing Optimization Of Fresh Agricultural Products Based On Road Conditions,
2019
College of Mechanical and Electrical Engineering, Henan Agricultural University, Zhengzhou 450002, China;
Distribution Routing Optimization Of Fresh Agricultural Products Based On Road Conditions, Wang Heng, Yaxing Xu, Zhenfeng Wang, Tianpeng Zhou, Dechun Tian
Journal of System Simulation
Abstract: Reasonable arrangement of distribution route of fresh agricultural product can effectively guarantee the freshness of products, improve the distribution efficiency, and reduce the distribution cost. In practical distribution, the road condition is an important factor affecting the arrangement of the distribution route. According to the different road conditions, the speed characteristic models are set up. Meanwhile, considering the perishable and vulnerable characteristics of fresh agricultural products, the function of time window penalty cost and the function of customer satisfaction are established. Based on the comprehensive consideration of factors, such as road condition, time window and fresh consumption, a multi-objective …
Simulation Of Domestic Hot Water Using Behavior Of College Students Based On Group Characteristics,
2019
1. College of Civil Engineering, Hunan University, Changsha 410082, China; ;
Simulation Of Domestic Hot Water Using Behavior Of College Students Based On Group Characteristics, Zhou Jin, Xiaoping Yin, Xu Feng
Journal of System Simulation
Abstract: The use of domestic hot water is influenced by user’s gender and living habits, so the composition and behavior characteristics of user group have great influence on the design and operation control of domestic hot water system. The classification of hot water user group of college students was made by means of statistical analysis of original data, and the parameters related to the probability distributions of hot water use behavior were obtained. The simulation of domestic hot water using by college students was conducted and compared with the data generated from original recorded data, and the results show good …
Soil Data Construction Method For Cross-Country Trafficability Analysis,
2019
Institute of Surveying and Mapping, Information Engineering University, Zhengzhou 450052, China;
Soil Data Construction Method For Cross-Country Trafficability Analysis, Kunwei Li, You Xiong, Zhang Xin, Fen Tang
Journal of System Simulation
Abstract: Soil is one of the most important factors influencing the off-road maneuver of the army. The combination of soil and weather factors makes cross-country trafficability analysis extremely complicated. The soil data from unified soil classification system (USCS) are the basis for the analysis of soil trafficability. In this paper, the random forest method is used to predict the type of soil by using various attribute information. The method extracts sample data from existing USCS soil data to construct multiple random forest models, then analyses the accuracy of random forests and the importance of characteristic variables, and finally uses the …
Optimal Design And Implementation Of Fractal Dipole Antenna Based On Arc Of Trigeminal Tree Structure,
2019
1.School of Information Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China;;
Optimal Design And Implementation Of Fractal Dipole Antenna Based On Arc Of Trigeminal Tree Structure, Xiaohong Zhang, Xiaoxiao Nan, Yixian Yang
Journal of System Simulation
Abstract: A RFID fractal dipole antenna is designed with the arc of the trigeminal tree structure, which is fed by simple microstrip balun to achieve better impedance matching within employing double parallel line structure and by using the dielectric substrate withεr=4.4 and tan δ=0.035. The results of electromagnetic property simulation analysis of HFSS show that the return loss can reach 36dB, which is much higher than binary arc-shaped fractal antenna which is 16dB; and the impedance matching is very ideal. By physical processing and testing of the antenna, the measured results are in very good agreement with simulation …
Blind Separation Simulation System Of Sound Signals Based On Time-Frequency Analysis Of Short Time Fourier Transformation,
2019
School of Network security and Informatization, Weinan Normal University, Weinan 714099, China;
Blind Separation Simulation System Of Sound Signals Based On Time-Frequency Analysis Of Short Time Fourier Transformation, Xiaorong Tong
Journal of System Simulation
Abstract: In order to improve the ability of real-time and separation accuracy, a blind separation algorithm based on time-frequency (TF) analysis of short time Fourier transformation is proposed, and the problems of underdetermined sound signal sorting can be solved effectively. The proposed method avoids some of the drawbacks, relaxes the assumption by allowing the sources to be TF-non-disjoint to a certain extent, and the algorithm can be achieved in the condition of TF-non-disjoint. This method was successfully applied to sound signal sorting system; the time domain waves of signals can be got; and the whole signal sorting process can be …
Evaluation Of Flow Line Structure Of Hospital With Spatial Cognitive Agent,
2019
School of Economics and Management, Tongji University, Shanghai 200092, China;
Evaluation Of Flow Line Structure Of Hospital With Spatial Cognitive Agent, Yunfeng Wang
Journal of System Simulation
Abstract: Hospital flow line is the result of the mutual adaptation of its spatial layout and business process, which should be regarded as an independent analysis unit in the spatial layout design. Aiming at the phenomenon that the flow lines have the characteristics of both space and flow and are difficult to analyze, a spatial cognitive process of agents is established by introducing structural elements from the spatial syntax analysis as the knowledge coding language of agents. Evaluation indexes of hospital flow line structure based on computational experiment are proposed and implemented. The framework of flow line analysis combining flow …
Overview Of Image Segmentation And Registration For Spine Biological Modeling,
2019
1. School of Electrical Engineering, Nantong University, Nantong 226019, China;;2. School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China;;
Overview Of Image Segmentation And Registration For Spine Biological Modeling, Juping Gu, Tianyu Cheng, Hua Liang, Jianping Wang, Zhao Jian, Cao Yong
Journal of System Simulation
Abstract: The prevalence of common spinal fractures is high in this day. Spinal image segmentation and registration are the key step and prerequisite of target recognition, biomechanical modeling and finite element analysis. They are also the key technology of noninvasive surgery navigation. Aiming at the problems of spinal image processing, the classical medical image segmentation and registration algorithm is introduced. It also analyzes the defects and prospects of the future development trend of spine image processing. The research results have certain significance for further understanding of spinal medical image processing and promoting the development of rehabilitation therapy for spinal fractures.
Traffic Patterns For Intelligent Vehicles In The Intersection,
2019
School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China;
Traffic Patterns For Intelligent Vehicles In The Intersection, Wang Jian, Feng Qi, Xiaowei Hu
Journal of System Simulation
Abstract: With the applications of GPS/DR/MM integrated positioning technology and vehicle infrastructure integration technology, three traffic patterns with which intelligent vehicles go through the intersection are put forward. These three traffic patterns include signal lights adaptive traffic pattern, vehicle self-organizing traffic pattern and vehicle infrastructure integration traffic pattern. They can reduce vehicle delay, avoid traffic conflicts, decrease the probability of traffic accidents, improve traffic efficiency and realize the barrier-free accessibility of intelligent vehicles to the intersection. According to the parameters such as vehicles arrival rate, critical velocity and the average vehicle spacing, a clearance movement model and a circular path …
3d Flight Trajectory Simulation Generator Based On Track Constraints,
2019
Electronics Engineering & Automation Department, Civil Aviation University of China, Tianjin 300300, China;
3d Flight Trajectory Simulation Generator Based On Track Constraints, Shuguang Sun, Cheng Peng
Journal of System Simulation
Abstract: The airborne navigation equipment needs accurate flight trajectory data to test its performance. According to the requirements of the Beidou receivers, considering the constraint of trajectory and flight performance, a flight trajectory generator is designed using iteration like method. The flight trajectory generator can generate the whole trajectory data and the flight parameters of the aircraft based on the actual flight procedures, and display the data and parameters in real time. The whole flight trajectory simulation data from Beijing International Capital Airport to Guangzhou Baiyun International Airport is generated. The result shows that the flight trajectory generator can generate …
Modular Design Method Of Integrated Avionics Simulation System,
2019
Flight Simulation Technology Research Institute, Troop 93199 of PLA, Harbin 150001, China;
Modular Design Method Of Integrated Avionics Simulation System, Mingbo Zhao, Pan Long, Longwei Jiang, Wang Gang, Guangxing Zhao
Journal of System Simulation
Abstract: In the past, there were some problems in the software design for the flight simulation avionics system such as the decentralized structure and the low degree of modularization. Aiming at these problems, a hierarchical, modular integrated avionics system is constructed. The logic part dispersed in each function module is independent to form the integrated logic module. Each task function module and its sub module are responsible for the calculation of the relevant task function algorithm. Modular design is carried out in a deeper level. By dataflow analysis, each module in this design has strong cohesion and weak coupling and …
Rehabilitation Training System Based On Brain Computer Interface,
2019
1. School of Mechatronics Engineering and Automation, Shanghai University, Shanghai 200444, China;;2. Key Laboratory of Power Station Automation Technology, Shanghai 200444, China;
Rehabilitation Training System Based On Brain Computer Interface, Banghua Yang, Li Bo
Journal of System Simulation
Abstract: Brain-computer interface (BCI) is a new communication and control method. The BCI rehabilitation training system was developed for rehabilitation training of post-stroke patients by using MATLAB and VC++ hybrid programming method. By decoding the EEG signal, the patient's movement intention can be recognized accurately in real time, then the work of the rehabilitation peripheral is triggered to give feedback from the visual, auditory, and tactile. The patient's active rehabilitation is achieved through the system. The system has the characteristics of user-friendly interface, modular algorithm, high online recognition rate; and it can be used as a reference for BCI-based …
High-Pass Difference Features Based Image Quality Assessment,
2019
1. Department of Computer Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;;
High-Pass Difference Features Based Image Quality Assessment, Wang Rui, Li Ping, Bin Sheng, Congbin Qiao, Lizhuang Ma, Enhua Wu
Journal of System Simulation
Abstract: Current methods of image quality assessment only can assess the quality of images under the same type of image distortion. In order to fix such weaknesses, this paper is designed based on the image features of natural scene statistics and proposes a new metric method using high-pass filter for detecting features. The approach computes locally the normalized luminance; selects features such as the difference of RGB channels via high-pass filter, image gradient, sharpness, contrast, etc.; and analyzes and gathers features in the metric method trained by logistic regression. Experimental results show that the proposed method can work efficiently under …
Design And Research On Simulation Model Of Limestone-Wet Flue Gas Desulfurization Absorption Tower,
2019
Hebei Engineering Research Center of Simulation & Optimized Control for Power Generation, North China Electric Power University, Baoding 071003, China;
Design And Research On Simulation Model Of Limestone-Wet Flue Gas Desulfurization Absorption Tower, Zhang Yue, Han Pu, Zhang Xiang
Journal of System Simulation
Abstract: The mass transfer and chemical reaction processes of wet flue gas desulfurization (FGD) are very complex. It is helpful to improve the operation level of desulfurization site by studying the internal mechanism and establishing a high precision mechanism model. The absorption tower is divided into some regions, and the modeling targets in different regions are determined. The sulfur dioxide absorption region is divided into different heights of the "cell" by the slurry droplet falling distance and exposure time. According to the motion characteristics and mass transfer process, the desulfurization efficiency and pressure drop are calculated, and the absorption efficiency …
Hardware-In-The-Loop Simulation Method For Laser Active Imaging Guidance,
2019
1. Science and Technology on Complex System Control and Intelligent Agent Cooperation Laboratory, Beijing 100074, China;;2. Beijing Electromechanical Engineering Institute, Beijing 100074, China;
Hardware-In-The-Loop Simulation Method For Laser Active Imaging Guidance, Zhang Qing, Yijie Li
Journal of System Simulation
Abstract: The system of laser active imaging guidance hardware-in-the-loop simulation is a significant system for testing and validating the capability of laser active imaging guidance and control, it also means a lot in practical applications. The composition of guidance and control system for the laser active imaging aerocraft is analyzed, and the purpose and test flow for the hardware-in-the-loop simulation system are introduced. The integrated project for laser active imaging guidance hardware-in-the-loop simulation system is designed. The functions and elements for the crucial simulation equipment of laser active imaging echo simulator are analyzed; the elements of model composition and …
Improved Dv-Hop Localization Scheme Based On The Best Path Matching Strategy,
2019
1. School of Computer Science & Information Engineering, Shanghai Institute of Technology, Shanghai 201418, China;;
Improved Dv-Hop Localization Scheme Based On The Best Path Matching Strategy, Qinqin Shi, Xu Qiang, Jianping Zhang
Journal of System Simulation
Abstract: Improvement strategies are provided in view of the fact that the original DV-Hop (Distance, Vector-Hop) method has great error in distance estimation due to the network anisotropy in practical applications and the sensitivity of its location derivation algorithm to the range error. In the distance estimation step, a strategy of computing path similarity parameter is proposed to find out the most similar beacon-beacon path to beacon-node path; in the position calculation step, a modified PSO (Particle Swarm Optimization) algorithm is added after the initial position of an unknown node being derived using Lateration algorithm. Simulation shows that compared with …
Traffic Dynamic Regulation And Control Technology In The Central Area Of Nanning City,
2019
1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;;
Traffic Dynamic Regulation And Control Technology In The Central Area Of Nanning City, Yiman Du, Hongfan Su, Jianping Wu, Chen Yu, Huang Lin, Longfei Liu
Journal of System Simulation
Abstract: As the transportation develops rapidly, the traffic burden increases in downtown areas, especially in the areas of convention center, government building, and business & financial center, which exacerbates traffic congestion nearby. Conventional traffic control measures taken include stagger shifts, congestion charging, and tail number limit. Interests of multi aspects are involved in these measures, which has broad effect. The traffic managers now begin to ameliorate traffic burden by technical methods. A feedback-gate control based regional traffic volume control method was proposed and a microscopic simulation was adopted. This reasearch aims to ameliorate traffic pressure and balance traffic flow through …
