Disruption Management Simulation For Multi-Mode Resource-Constrained Project Scheduling Problem,
2020
Equipment Academy of PLA, Beijing 101416, China;
Disruption Management Simulation For Multi-Mode Resource-Constrained Project Scheduling Problem, Shengming Liu, Shuxing Feng
Journal of System Simulation
Abstract: As the disruption management simulation for multi-mode resource-constrained project scheduling problem received little concern, a pretty reasonable disruption management simulation process was designed. After analyzing the functional weakness of MS Project, disruption management simulation for multi-mode resource-constrained project scheduling problem was implemented by optimized computation of CPLEX Studio IDE. According to examples from Project Scheduling Problem Library, the cases of a single disruption in a single moment and multiple disruptions in multiple moments were simulated as well as analyzed. The results show that the resource conflicts play an important role on time limit of whole project and simulation process …
Optimization On Search Submarine Parameters Of Dipping Sonar Using Orthogonal Design Method,
2020
1. Naval Aeronautical and Astronautical University, Yantai 264001, China; ;
Optimization On Search Submarine Parameters Of Dipping Sonar Using Orthogonal Design Method, Musheng Luo, Zongjie Wang, Wencai Ge
Journal of System Simulation
Abstract: To solve the limitation of multi-parameter analysis using one by one optimization method, search submarine parameters optimization of antisubmarine helicopter using dipping sonar was studied. After analyzing the submarine-search process of dipping sonar, search probability and average time of search cost were made as the indexes. The seven primary factors which influenced submarine-search efficiency were analyzed and corresponding factorial levels were selected. Based on orthogonal design method, the orthogonal test schemes of L18(61×36) were built, which could simulate seven parameters when their value changed simultaneously. Monte Carlo simulation model was built and all …
Simulation Study Of Nuclear Fuel Cycle Mode Based On Third Generation Pwr In China,
2020
1. Department of Automation North China Electric Power University, Baoding 071003, China; ;2. China Techenergy Co., LTD, Beijing 100094, China;
Simulation Study Of Nuclear Fuel Cycle Mode Based On Third Generation Pwr In China, Zhibin Liu, Ma Jin, Bingshu Wang, Xinhui Duan
Journal of System Simulation
Abstract: Based on the State Council 2012 Nuclear Safety Plan (2011-2020) and Nuclear Medium and Long-term Development Plan(2011-2020), the report of the research on China energy medium and long-term(2030, 2050) development strategyof China Academy of Engineering Physics and Chinese 13th Five-Year Plan combined the primary of operating M310 type reactors and the third generation HPR1000, AP1000, CAP1400, and the current and future PWR nuclear fuel cycle mode was studied under MATLAB simulation environment employing once through mode. The demand of natural uranium resource, separate works, the amount of spent fuel, plutonium, also minor actinides arising following the accumulative PWR …
Modeling And Control Method Of Photovoltaic Micro-Inverter,
2020
1. State key laboratory of Alternate Electrical Power System with Renewable Energy Sources, Baoding 071003, China; ;
Modeling And Control Method Of Photovoltaic Micro-Inverter, Weiliang Liu, Chunlai Li, Changliang Liu, Yinsong Wang, Yongjun Lin, Liangyu Ma, Wenying Chen
Journal of System Simulation
Abstract: Photovoltaic micro-inverter can solve the poor reliability and low efficiency problem of centralized inverter, therefore it has a good application prospect. Small signal analysis model was established for the photovoltaic micro-inverter with flyback topology structure. Considering function of reverse current prevention being required when it was applied to the low voltage distribution network, control methods were disigned respectively for load current tracking mode and maximum power point tracking mode, and the controller parameters were optimized using genetic algorithm. Experimental and simulation results show that the micro-inverter can steadily work in two different modes, and reduce the harmonic content …
Non-Singular Terminal Sliding Mode Control For Bank-To-Turn Missile Based On Active Disturbance Rejection Decoupling Controller,
2020
1. State Key Laboratory of Virtual Reality Technology and System, Beihang University, Beijing 100191, China;;2. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China;;3. Science and Technology on Aircraft Control Laboratory, Beijing 100191, China;
Non-Singular Terminal Sliding Mode Control For Bank-To-Turn Missile Based On Active Disturbance Rejection Decoupling Controller, Ma Fei, Yunjie Wu, Mingzhi Cheng
Journal of System Simulation
Abstract: An overload tracking model was established, based on the traditional model of BTT (Bank-to-Turn) missile, and an ADRDC (active disturbance rejection decoupling controller) was designed because of the strong coupling problem in this model. For the coupled channel, the decoupling was performed by the ADRDC, and then the NTSMC (non-singular terminal sliding mode controller) was added. For the non-coupled channel, only the NTSMC was designed. The experimental results show that the new control strategy can combine the strong robustness of ADRDC with the finite time convergence ability of NTSMC. Besides, it shows good dynamic performances and steady-state …
Quick Diagnosis Of Ucav Control Surface Failure And Its Hardware-In-The-Loop Simulation,
2020
1. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China;;
Quick Diagnosis Of Ucav Control Surface Failure And Its Hardware-In-The-Loop Simulation, Guanhua Lu, Xia Jie
Journal of System Simulation
Abstract: There are many problems in current detection methods such as conditional limitations and complexity of calculation which make them not easy to be put into practical application. The relationship between the servo motor information and the failure of the control surface was analyzed, and a method of detecting the failure rate of the control surface by using the servo current information in combination with the aerodynamic model was proposed. The result of its hardware-in-the-loop simulation shows that the detection system can quickly and accurately output the failure rate within 1 second which is a conservative estimate. That makes the …
Study Of Dynamic Economic Load Dispatch Using Particle Swarm Optimization With Multi-Information Characteristics,
2020
1. School of Internet of Things Engineering, Jiangnan University, Wuxi 214122, China;;
Study Of Dynamic Economic Load Dispatch Using Particle Swarm Optimization With Multi-Information Characteristics, Huang Song, Wang Yan, Zhicheng Ji
Journal of System Simulation
Abstract: According to the characteristics of power system, an model of dynamic economic load dispatch based on multiple fuel resources and 24-hour forecasting load demand was established, and a particle swarm optimizer using multi-information characteristics of all personal-best information was proposed to solve it. In the algorithm, centroid position and median position were defined, and then the personal-best position, centroid position and median position was developed to modify the velocity update formula. The algorithm could reduce the premature phenomenon for solving complex optimization problems, and it could make effectively solve dynamic economic load dispatch. The simulation was conducted to optimize …
Simulation-Based Optimization For Site Selection Of Agv Charging Mode,
2020
1. Maritime College, Ningbo University, Ningbo 315211, China;;
Simulation-Based Optimization For Site Selection Of Agv Charging Mode, Danlan Xie, Haihong Yu, Chen Jing, Zhipeng Gao, Zhanghao Zhang
Journal of System Simulation
Abstract: With the development of intelligent manufacturing, automation of production line is improving. AGV (automated guided vehicle) as a necessary device in the automation system, it is important to design its charging system. Aiming at the problem of the site selection of online charging, the software FlexSim was used to build simulation model, based on the operation requirements of an actual assembly shop, in an actual planning process. Through a large number of simulation experiments, the maximum stay location of AGV in the different lines was obtained under the influence of random factors. By comparing the idle and blocked …
Research Of Air Mission Recognition Method Based On Deep Learning,
2020
Department of Information Warfare and Command Training National Defense University, Beijing 100091, China;
Research Of Air Mission Recognition Method Based On Deep Learning, Qingkai Yao, Shaojun Liu, Xiaoyuan He, Ou Wei
Journal of System Simulation
Abstract: In the large-scale simulation of war game, the air mission is the focus of the commander's attention. The rapid, accurate and automatic recognition of air missions is the prerequisite and basis for intelligent decision making. The rapid development of deep learning technology provided a practical and feasible solution for the extraction of complex battlefield posture features, and provided technical support for studying air mission recognition. The research progress of the traditional mission recognition research method and the mission recognition method based on the deep learning was summarized. The three methods of deep learning of Convolution Neural Network (CNN), Long-short …
Vulcanization Shop Scheduling Based On Distribution Estimation Algorithm,
2020
Engineering Research Center of IoT Technology Applications Ministry of Education, Jiangnan University, Wuxi 214122, China;
Vulcanization Shop Scheduling Based On Distribution Estimation Algorithm, Shougang Zhang, Longcheng Wu, Wang Yan, Zhicheng Ji
Journal of System Simulation
Abstract: Due to the characteristics of long time-consuming, energy consumption and high concentration in rubber tire vulcanization process, which is the tire production process bottlenecks process, a discrete distribution estimation algorithm (EDA) was proposed to solve the problem of vulcanization shop scheduling optimization with minimum maximum completion time as the optimization target. The algorithm was tested by different examples, and it was compared with the genetic algorithm and the harmony search algorithm. The experimental results show that the EDA algorithm is superior to the genetic algorithm and the harmony search algorithm in the quality of the solution and convergence speed, …
Threat Assessment Of Aircraft Carrier Formation Based On Hierarchical Bayesian Network,
2020
1. Graduate School of NDU, Beijing 100091, China;;
Threat Assessment Of Aircraft Carrier Formation Based On Hierarchical Bayesian Network, Chen Long, Yaping Ma
Journal of System Simulation
Abstract: The use of bayesian network model for threat assessment is a relatively new quantitative analysis method. The hierarchical bayesian network model was applied to aircraft carrier formation to assess submarine formation threat for the first time, which also assessed the threat level of the submarine formation, to achieve the purpose of assisting decision-making for aircraft carrier formation commanders in anti-submarine warfare. The hierarchical bayesian network model was described. The causes and the mechanism of the aircraft carrier formation from the underwater target threat, integrated force data, institutional experts and information were analyzed. A reliable aircraft carrier formation hierarchical …
Research Of Modeling Of Spatial Information Support Sos Based On Complex Network Theory,
2020
1. Department of Information Operation & Command Training, National Defense University, Beijing 100091, China;;
Research Of Modeling Of Spatial Information Support Sos Based On Complex Network Theory, Qingjun Zhang, Mingzhi Zhang, Qingjuan Zhang, Wu Xi
Journal of System Simulation
Abstract: Spatial information support system as the main body of space operations, in the future network of joint operations, plays a central role. Based on the characteristics of spatial information support system, a modeling method combining multi-agent, multi-resolution and complex network was proposed, and the spatial information support system model framework was constructed. Multi-agent model, multi - resolution model and complex network model were established, and the connectivity rate in the complex network model was simulated and analyzed, so as to lay the foundation for further research on the modeling of spatial information support system.
Research On 3d Scene Modeling Based On Uav And Lidar,
2020
College of Information System and Management, National University of Defense Technology, Changsha 410073, China;
Research On 3d Scene Modeling Based On Uav And Lidar, Zhang Hang, Bin Chen, Hanzhang Xue, Zhengqiu Zhu, Rongxiao Wang
Journal of System Simulation
Abstract: Simulation is a significant method of emergency management research which demands the digital data of real scenes. Hardware was integrated to design the air borne point cloud data acquisition platform by using UAV as carrier, picking up the laser radar, IMU, etc. Furthermore, the platform was used to collect point cloud data and SLAM algorithm was used to establish real-time point cloud map. Moreover, point cloud map was utilized to establish 3D model. The problem of real scene 3D model construction was solved, designing and realizing point cloud processing and 3D modeling software, and a lot …
Radar Emitter Signal Identification Based On Slide+Svm,
2020
College of Electrical Engineering Southwest Jiaotong University, Chengdu 610031, China;
Radar Emitter Signal Identification Based On Slide+Svm, Yingkun Huang, Weidong Jin
Journal of System Simulation
Abstract: For the deficiency of traditional techniques of emitter signal feature extraction which heavily rely on experience, a model of radar emitting signal identification based on feature self-learning was proposed. This model consists of following 2 parts. Firstly, transform radar signal into frequency domain, then reduce signal dimension by using improved Piecewise Aggregate Approximation (PAA) method. Secondly, create the model of multi-layer Liner Denoiser (LIDE) to feature learning by using unsupervised training method. The validity of model was verified by simulating 5 different kinds of emitting signal with the outcome that excellent identification accuracy could be achieved at …
Speech Endpoint Detection Method Based On Lms Noise Reduction And Improved Dual-Threshold,
2020
1. School of Mechatronics Engineering and Automation, Shanghai University, Shanghai 200072, China;;
Speech Endpoint Detection Method Based On Lms Noise Reduction And Improved Dual-Threshold, Chunli Zhu, Li Xin
Journal of System Simulation
Abstract: Endpoint detection of speech in low signal-to-noise ratio plays a very important role in voice processing. For a speech signal that is polluted by additive noise, it is possible to suppress the noise and keep the original speech relatively constant. A dual-threshold speech endpoint detection algorithm was proposed based on the least mean squares error (LMS) adaptive filtering. Dual median filtering smoothing was performed before and after double-parameter double-threshold detection. Through the Matlab simulation, the speech endpoint detection method was compared with other methods. In the noise environment with low signal-to-noise ratio, the endpoint detection effect of speech has …
Model Validation Method For Discrete Event Simulation,
2020
Control and Simulation Center, Harbin Institute of Technology, Harbin 150001, China;
Model Validation Method For Discrete Event Simulation, Niu Shuai, Shenglin Lin, Li Wei, Yang Ming
Journal of System Simulation
Abstract: Due to the discrete event system with some characteristics like unfixed operation process, flexible entity state and other issues, a comprehensive validation method for discrete event simulation model based on qualitative and quantitative analysis was proposed. The evaluation index system was composed of four aspects that are the consistency of simulation results, logic correctness of events occurrence sequence, consistency of condition events occurrence probability and consistency of activity execution time respectively. A qualitative and quantitative calculation method for the bottom evaluation indexes was proposed. The qualitative analysis method was used to validate logic correctness of events occurrence sequence and …
Research On Dynamic Authorization Allocation Of Collaborative Virtual Maintenance Based On Cpn Tools,
2020
Xi'an Hi Tech Research Institute, Xi'an 710025, China;
Research On Dynamic Authorization Allocation Of Collaborative Virtual Maintenance Based On Cpn Tools, Yunrong Zhang, Zhili Zhang, Shixin Ma
Journal of System Simulation
Abstract: In order to effectively deal with the concurrent behavior of cooperative virtual maintenance for the same object, a dynamic allocation scheme was proposed to complete the maintenance operation. Before the maintenance task was started, the maintenance steps were planned, and the operation rights were allocated dynamically according to the characteristics of each maintenance step. The idea of allocation and recovery of dynamic operation rights were proposed in multi person cooperative maintenance, discussing the method of ensuring the state uniqueness of maintenance personnel in the process of simulation maintenance. The process of dynamic rights allocation was simulated by colored …
Research On Weapon System Design For Risk Management Based On Object-Process Methodology,
2020
National University of Defense Technology, Changsha 410073, China;
Research On Weapon System Design For Risk Management Based On Object-Process Methodology, Zheng Zhan, Yao Jian, Yang Feng, Wenguang Wang
Journal of System Simulation
Abstract: In order to improve the integration and coordination of the weapon systems engineering and risk management, a new approach was proposed that integrated risk aspects with system analysis, modeling and design in weapon systems engineering. The approach established the lifecycle model of the weapon systems engineering to realize the risk identification and control in risk management based on OPM (Object-Process Methodology). V & V (verification and validation) was implemented to the OPM model by the simulation and execution progress, which significantly ensured the correctness and consistency of information and knowledge. It shows a case of UAV-based anti-missile defense system …
Novel Automatic Pavement Crack Detection Algorithm,
2020
1. College of Computer and Software Engineering, Huaiyin Institute of Technology, Huaian 223001, China;;
Novel Automatic Pavement Crack Detection Algorithm, Shangbing Gao, Xie Zheng, Zhigeng Pan, Fangzhe Qin, Li Rui
Journal of System Simulation
Abstract: The complexity of noises covers a wide area of actual road images which causes that it is difficult to detect cracks. An automatic pavement crack detection algorithm was proposed in view of the characteristics of crack image in pavement disease. Gray-scale correction and filtering was used to preprocess the crack image. The maximum interclass variance method and Canny operator were used to detect the edge of the disease image, and then the localization and accurate segmentation algorithm was proposed for the crack image based on the maximum connectivity of the crack in the fracture image. The convolution neural network …
Research On Technology Of Data Storage And Access In High-Throughput Simulation,
2020
1. School of Computer Science, Beijing Institute of Technology, Beijing 100081, China;;
Research On Technology Of Data Storage And Access In High-Throughput Simulation, Zishuo Wang, Yanlong Zhai, Wenjun Tao, Yang Hao, Zhang Han, Duzheng Qing
Journal of System Simulation
Abstract: Aiming at the massive data processing requirements of simulation application in the big data environment, the concept and reference structure of high-throughput simulation were proposed and defined in accordance with the architecture and technical characteristics of high-throughput big data computing. For the problem of data access bottleneck in high-throughput simulation, a high-throughput simulation data storage and access system was designed based on distributed memory file system, and the non-volatile memory was integrated to improve the throughput of data access. The experimental results of typical simulation applications show that the high-throughput simulation storage system with distributed memory file system and …
