Cohesion Based Algorithm To Manage Ids Alerts,
2020
PLA Information Engineering University, Zhengzhou 450004, China;
Cohesion Based Algorithm To Manage Ids Alerts, Jinlei Huang, Hengjun Wang, Bin Yu
Journal of System Simulation
Abstract: On the basis of intrusion taxonomies and semantic similarity, the concept of cluster cohesion as well as an algorithm was proposed to manage IDS alerts. Based on cohesion, the proposed approach used improved bisecting K-means to aggregate massive alerts, and extracted the abnormal alerts from clusters formed in aggregation. The experimental results show that the approach is effective in alerts aggregation and abnormal alerts detecting, and can generate understandable meta-alerts with higher accuracy.
Ble Key Agreement Scheme Based On Rssi Variation Trend,
2020
PLA Information Engineering University, Zhengzhou 450004, China;
Ble Key Agreement Scheme Based On Rssi Variation Trend, Xinghao Zhang, Yicai Huang, Bin Yu
Journal of System Simulation
Abstract: Based on the variation trend of received signal strength index, a lightweight BLE key agreement scheme was proposed. Using adaptive frequency hopping, the variation of channel characteristics was strengthened. According to the randomness and reciprocity of BLE channel characteristics in coherence time, the RSSI of BLE signal was measured. And the real-time key was produced by calculating the variation trend. On the basis of experiments results, the randomness of key can be ensured, and a high key generation rate has been reached at the same time. The scheme can be applied to resource-constrained applications.
Motion Analysis And Simulation Of Lower Limb Based On Adams,
2020
1. School of Science and Engineering of Hebei University of Technology, Tianjin 300130, China; ;
Motion Analysis And Simulation Of Lower Limb Based On Adams, Zhang Yan, Haomiao Zhang, Bokai Xuan, Yongchang Zhang
Journal of System Simulation
Abstract: On the basis of the lower limb movement kinematics and dynamics analysis, a lower limb motion simulation system was established by the virtual prototyping technology. The human model was designed by ADAMS and the angle and moment of force in each joint were obtained through kinematics and dynamics analysis. The established model of lower limb was validated by the simulation of human lower limb movement under different road conditions. The experiment result shows that the walking process of each road conditions are stable and normal. It indicates that the virtual prototype model can accurately describe the process of human …
Modeling And Simulation Of Single Lane Taxi Boarding System Based On Queuing Theory,
2020
1. Management Institute China University of Mining and Technology(Beijing), Beijing 100083, China; ;2. Experimental Institute Beijing University of Technology, Beijing 101101, China; ;
Modeling And Simulation Of Single Lane Taxi Boarding System Based On Queuing Theory, Sun Jian, Rijia Ding, Yanyan Chen
Journal of System Simulation
Abstract: Taxi pick-up area was described as a queuing system based on the GPSS language to establish a simulation model, to find out a new way to improve taxi traffic capacity. Vehicle release officer and passenger release officer were represented by logic switch object, such business logic as taxi producing, taxi entering, boarding, taxi leaving could be reappeared well in computer. The time which spent on the above processes were analysed and by video data. Multi wheel simulation experiments were carried out. Quantitative analysis was executed to find out how the traffic capacity are affected by the berth quantity and …
Research On Network-On-Chip Synthesis Flow Based On Hybrid Optimization Mapping Algorithm,
2020
1. Guangdong Polytechnic Institute, Guangzhou 510091, China; ;
Research On Network-On-Chip Synthesis Flow Based On Hybrid Optimization Mapping Algorithm, Junyi Li, Yijun Liu, Le Jianliang
Journal of System Simulation
Abstract: To solve the problem of particle swarm optimization algorithm, which is easy to fall into local optimum in network on chip mapping, a hybrid optimization mapping Algorithm based on particle swarm optimization and genetic algorithm was proposed. It implemented GA and PSO separately with two groups, by the superior individuals from GA algorithm instead of the initial random particles from PSO algorithm, which not only maintained the diversity of the group but also improved search efficiency. Simulation results based on NS-2 show that the Network-on-Chip from the automatic generation tools have a good performance in network latency, throughput, and …
Estimation Of Atmospheric Parameter Based On Airflow Velocity Over Wing Leading Edge,
2020
1. Department of Flight Vehicle Control, Aviation University of Air Force, Changchun 130022, China; ;
Estimation Of Atmospheric Parameter Based On Airflow Velocity Over Wing Leading Edge, Lilin Qian, Jianwu Tao, Yueming Yang, Yu Fei
Journal of System Simulation
Abstract: A new method measuring the atmospheric parameters was proposed based on acoustic vector sensors located at the wing leading edge, and the atmospheric parameters model was set up based on the airflow velocity distribution sensed by acoustic vector sensor over wing leading edge. According to the symmetric, swept character of wings, velocity vector was decomposed to solve the non-linear equation of model. The expressions of angle of sideslip, angle of attack and free stream velocity were derived. The feasibility of the expressions was verified by wing simulation data from Fluent.
Online Optimal Control Method Of Conveyor-Serviced Batch Processing System,
2020
School of Electrical Engineering and Automation, Hefei University of Technology, Hefei 230009, China;
Online Optimal Control Method Of Conveyor-Serviced Batch Processing System, Wu Song, Tang Hao, Tan Qi
Journal of System Simulation
Abstract: In conveyor-serviced batch processing system, jobs arrive dynamically and are stored in a buffer to be further processed by the batch processing machine. Under the cases of non-identical job sizes, online optimal control of the system with a single machine was mainly concerned. Optimization model of the system was built by using look-ahead range as control variable. The objective is to maximize the job processing rate of the system in infinite horizon. Two decision processes are included in the model, which are batching process and action-selection process. For the batching process, the rule of minimizing process-capacity wasting ratio of …
Co-Design Between New Event-Triggered Communication Scheme And Less Conservative Robust H∞ Fault-Tolerant Control For Networked Control Systems,
2020
College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
Co-Design Between New Event-Triggered Communication Scheme And Less Conservative Robust H∞ Fault-Tolerant Control For Networked Control Systems, Li Wei, Pengfei Zhai, Yajie Li
Journal of System Simulation
Abstract: Based on the analysis for the disadvantage of the current discrete event-triggered communication schemes, a new kind of event-triggered communication scheme constrained by transient and stead-state process was proposed to perfect the conservatism and isolation of the fault-tolerant controller. A closed-loop failure model which was concerned with state-error was established for networked control system. Using the improved Wirtinger's inequality and the improved reciprocally convex combination inequality, the co-design between new event-triggered communication scheme and less conservative robust H∞ fault-tolerant control for networked control systems was focused on. The simulation results show that the new discrete event-triggered …
Simulation Of Ultrasonic Shear Wave Imaging In Detection Of Liver Rupture,
2020
1. College of Science, Liaoning Shihua University, Fushun 113001, China; ;
Simulation Of Ultrasonic Shear Wave Imaging In Detection Of Liver Rupture, Yu Jiao, Erwei Nie, Yanying Zhu
Journal of System Simulation
Abstract: Ultrasonic shear wave imaging technology provides the elastic information of the soft tissue by examining the propagation of the shear waves in the tissue. The possibility of using ultrasonic shear wave imaging technology combined with a directional filter for the detection of liver rupture was explored. The COMSOL Multiphysics software was used to simulate the generation and propagation of the shear waves in the liver medium with a rupture, a directional filter-based algorithm was applied to separate the incident wave and reflected wave, and an edge detection algorithm was applied to detect and delineate the liver rupture. Preliminary results …
Evaluation Method Research For Coal Mine Services Policy,
2020
School of Computer Sciences and Technology, Henan Polytechnic University, Jiaozuo 454000, China;
Evaluation Method Research For Coal Mine Services Policy, Xue Xiao, Bin Gui, Yongmao Wang
Journal of System Simulation
Abstract: Mine service is the integration of the package which is based on a number of existing information system, the operation effect of service strategy directly determines the overall performance of the service system. However, due to the complexity of coal mine accidents and the special of mine environment, testing and evaluation of service strategy is very difficult in the actual environment. In order to solve this problem, an integrated evaluation method of coal mine service policy was proposed based on computational experiment. This method could be divided into three steps: the adaptive service strategy of service system in the …
Modeling Approach For Predictive Maintenance Scheduling Model Based On Variable Conversion,
2020
No.36 Research Institute of CETC, Jiaxing 314033, China;
Modeling Approach For Predictive Maintenance Scheduling Model Based On Variable Conversion, Mingyi You
Journal of System Simulation
Abstract: A modeling approach for predictive maintenance (PdM) scheduling model based on decision variable conversion was proposed. Based on the proposed approach, a PdM scheduling model could be established by replacing the time decision variable in the corresponding classical time-based preventive maintenance (PM) scheduling model with product condition variable(s) and checking the correlation of the model parameters, maintenance effect and maintenance constraints with product condition. Based on the proposed modeling approach, the application case study considered an unreported predictive maintenance model in which system benefit was correlated with its condition. The proposed approach used the existing PM scheduling …
Model For Multi-Area Interaction Control Based On User Strategy,
2020
PLA Information Engineering University, Zhengzhou 450004, China;
Model For Multi-Area Interaction Control Based On User Strategy, Gong Bi, Bin Yu
Journal of System Simulation
Abstract: To solve the problem of multi-area interaction, a model based on user strategy was established. The structure of model was proposed according to security area and user strategy, and transfer path and relevant concept were put forward. The model was instantiated based on portable storage device, the multi-area interaction scene was set up, and the interaction controller structure was designed. Experiments were set up to simulate the host read/write memory process. By judging the host's read/write jurisdiction to memory partition and whether the transfer path can be arrived, the experimental results show that the model can realize interaction control …
Closed-Loop Feedback Simulation To Process Of Ram Blowout Preventer Shut-In Locking,
2020
College of Computer and Information Technology, Northeast Petroleum University, Daqing 163318, China;
Closed-Loop Feedback Simulation To Process Of Ram Blowout Preventer Shut-In Locking, Fangzhou Zhang, Ruixue Sun, Wenjing Zhang, Li Long, Li Qiang
Journal of System Simulation
Abstract: Well control training was explained mainly by teacher in recent years. Virtual simulation made it difficult for students to understand the actual operation. Application of drilling well control simulation training system solved effectively the problem of the scene seldom repetition and high cost of well control training. For the simulation of the process of ram blowout preventer shut-in locking in the well controlled physical simulation training system, the stepping motor driver and the stepping motor were installed in ram blowout preventer, and locking operation of the lock device was realized by using speed and torque of the stepping motor …
Direct Torque Control For Brushless Dc Motor With Optimal Voltage Space Vector,
2020
School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
Direct Torque Control For Brushless Dc Motor With Optimal Voltage Space Vector, Xianzhong Jian, Shuangjie Qian
Journal of System Simulation
Abstract: The current freewheeling phenomenon and its causation of torque ripple were analysed. With the relationship between rotor and coil position, the traditional selection rules of voltage space vector were modified. To effectively control the freewheeling current, two different voltage space vector under the three-phase conduction model was proposed, making current keep close to the ideal curve and inhibit torque ripple. For speed adjustment, the Pang-Pang control was carried out after flow stage. The simulation model was carried out under the Simulink environment. The simulation results show that the proposed voltage space vector can effectively adjust the freewheeling …
Risk Simulation Analysis Of Runway Incursions Based On Multi Agents,
2020
1. Air Traffic Management Research Base , Civil Aviation University of China, Tianjin 300300, China; ;
Risk Simulation Analysis Of Runway Incursions Based On Multi Agents, Baojun Huang, Xiaodan Fang, Jiening Wang
Journal of System Simulation
Abstract: Nowadays, runway incursions are important problems affecting flight safety in airport surface operation. According to this problem, a new method was proposed for the risk analysis of runway incursion by using multi agent modeling theory, which established a risk analysis agent model of runway incursion. Pointing at typical scenarios for runway incursion incidents, LEADSTO (Language and Environment for Analysis of Dynamics by SimulaTiOn) language was applied to realize the accident simulation by temporal logic. Simulation results show that specification for pilot or controller behavior and alertness can avoid accidents occurrence. The proposed method can simulate dynamic system, which has …
Numerical Simulation On Hydraulic Characteristics Of Free Hydraulic Jump On Corrugated Beds Of Stilling Basin,
2020
State Key Laboratory of Eco-Hydraulic Engineering in Shaanxi, Xi'an University of Technology, Xi'an 710048, China;
Numerical Simulation On Hydraulic Characteristics Of Free Hydraulic Jump On Corrugated Beds Of Stilling Basin, Wenli Wei, Yunfei Hong, Yuling Liu
Journal of System Simulation
Abstract: The VOF (volume of fluid) method was applied to track the free water surface, and the RNG k–ε turbulent model was used to close the two-phase flow time-averaged equations. The conditions properties of free hydraulic jumps on corrugated beds with a stilling basin under 9 kinds of conditions were studied by numerical simulation. Simulation research results show: There are vortexes generated by corrugated beds surfaces, rotating in the clockwise direction. The pressure distribution on corrugated beds in hydraulic jump region appears a wavy change, and the difference between the pressure values at adjacent crest and trough gradually decreases along …
Research And Simulation Of Satellite Channel Three-State Markov Model Under Fog-And-Haze Weather,
2020
1. College of Electronic and Information Engineering, Nanjing University of Information Science and Technology, Nanjing 210044, China; ;2. Jiangsu Collaborative Innovation Center on Atmospheric Environment and Equipment Technology (CICAEET), Nanjing 210044, China;
Research And Simulation Of Satellite Channel Three-State Markov Model Under Fog-And-Haze Weather, Yecai Guo, Lijian Cai, Weijuan Zhao, Xiuzai Zhang
Journal of System Simulation
Abstract: To accurately reflect the influence on the statistical characteristics of satellite channel under the fog-and-haze weather, the fog-and-haze weather was divided into the fog state, mixed state, and haze state, respectively, and their statistical characteristics were described by Rice model, Corazza model, and Suzuki model. Based on analyzing the conversion relation between fog-and-haze weather states, the satellite channel three-state Markov model was proposed. The defined joint level pass rate, the average fading duration and its relative error were used as the performance index of the satellite channel model, and the simulation tests were carried out. The simulation results show …
Drawing Of Isocandela Diagram In Dynamic Detection Of Light Intensity Of Airport Flight Aid Light,
2020
1. College of Electronic Information and Automation, Civil Aviation University of China, Tianjin 300300, China; ;2. Ground Support Equipments Research Base of Civil University of China, Tianjin 300300, China;
Drawing Of Isocandela Diagram In Dynamic Detection Of Light Intensity Of Airport Flight Aid Light, Lishan Jia, Liwen Wang
Journal of System Simulation
Abstract: To the drawing of isocandela diagram in dynamic detection of light intensity of airport flight aid light, the method of using Regular Rectangle Grid Algorithm was promoted. According to the theory of dynamic detection of light intensity of airport flight aid light, detection data was handled. The method combined virtual grid system with drawing area grid system. Changing trajectory of isocandela curves were searched in the virtual grid system. After searching, they were mapped onto the drawing area grid system and filled, and the isocandela diagram was generated eventually. Drawing program of isocandela diagram was written, simulation experiments were …
Precisely And Efficiently Vector Data Rendering Method In 3d Gis,
2020
Department of Computer Science and Information, Hefei University of Technology, Hefei 230009, China;
Precisely And Efficiently Vector Data Rendering Method In 3d Gis, Shanglin Li, Hu Xia, Xiaoping Liu
Journal of System Simulation
Abstract: In the geographic information system (GIS), vector data has many important applications in such aspects as orientation space location and spatial analysis. It is essential to make 2D vector data overlay mapping to the 3d terrain accurately and efficiently in 3D GIS. A method based on dynamic vector texture pyramid was proposed to render vector data. The real-time generated vector texture block corresponding with the level of the pyramid according to the current view position. Vector data texture block and terrain block are one-to-one correspondence, then they are unified rendering. Unconstrained anisotropic texture filtering methods was used to reduce …
Multi-Agent Based Modelling And Simulation For Understanding Tempo-Spatial Patterns Of Surgery Wait Times,
2020
Department of Computer and Information Science, Southwest University, Chongqing 400715, China;
Multi-Agent Based Modelling And Simulation For Understanding Tempo-Spatial Patterns Of Surgery Wait Times, Tao Li, Luo Liang, Zili Zhang, Lai Hong, Fuyuan Xiao
Journal of System Simulation
Abstract: In order to characterize the self-organized tempo-spatial patterns of wait times in a healthcare service system, a multi-agent cardiac surgery service model (MA-CSS model) was proposed based on the multi-agent modeling within the context of cardiac surgery services. This model pays a special attention to how patients' and hospitals' behaviors and interactions affect the dynamics and relevant patterns of wait times with respect to some key factors, such as geographic accessibility to services, hospital resourcefulness, and wait times. By experimenting with the MA-CSS model, it was observed that certain regularities in wait times emerged from the simulation, which were …
