Open Access. Powered by Scholars. Published by Universities.®

Systems Science Commons™

Open Access. Powered by Scholars. Published by Universities.®

4,223 Full-Text Articles 10,548 Authors 2,104,041 Downloads 67 Institutions

All Articles in Systems Science

Faceted Search

4,223 full-text articles. Page 140 of 209.

State Feedback Control Of Hybrid Active Power Filter, Yunjian Wang, Xiaoyun Liu, Rongzhi Zhang, Nana Xue 2020 1. School of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454000, China; ;

State Feedback Control Of Hybrid Active Power Filter, Yunjian Wang, Xiaoyun Liu, Rongzhi Zhang, Nana Xue

Journal of System Simulation

Abstract: According to the current tracking of active power filter, a state feedback control strategy was applied to three-phase shunt hybrid active power filter system, replacing popular PID controller, to overcome the drawbacks of the PID controller, such as big overshoot, error compensation etc.. The mathematical model was established and the feedback control law was derived based on the topological structure of hybrid active power filter selected. Moreover, the current detection used ip-iq detection algorithm while the stability of capacitor voltage in DC side used PI control. MATLAB/Simulink was applied to simulate the HAPF system, comparing with …


Design And Simulation Of Cut Flat Boring Bar By Both Materials' Composite Structure, Xie Feng, Wenxuan Wang, Xiaobao Lei 2020 Department of Electrical Engineering and Automation, Anhui University, Hefei 230601, China;

Design And Simulation Of Cut Flat Boring Bar By Both Materials' Composite Structure, Xie Feng, Wenxuan Wang, Xiaobao Lei

Journal of System Simulation

Abstract: Because the stressed structure of the boring bar in machine tool is a cantilever beam, and it is very easy to produce vibration. To study the vibration problem of boring bar, the general structure of boring bar was improved into the built-in damping core boring bar structure composed of two materials, according to the principle of self-excited vibration's coupling flutter and forced vibration's dynamic damping. At the same time, according to the principle that reasonable arrangement of small stiffness of the boring bar could reduce vibration, the composite structure boring bar was cut flat expecting to reach optimal damping …


Design Of Real-Time Communication On Bus Using Dspace System, Yan Cheng, Decong Huo, Xie Song 2020 DFH Satellite Co., Ltd, Beijing 100094, China;

Design Of Real-Time Communication On Bus Using Dspace System, Yan Cheng, Decong Huo, Xie Song

Journal of System Simulation

Abstract: The analysis of the problem of real-time communication on CAN bus was proposed using dSPACE simulator, and the solution was proposed. The CAN communication model based on dSPACE was designed using the methods of Interrupt or Enable to trigger the action. The spacecraft subsystem simulation model was built on the dSPACE, and the real-time communication was performed following the spacecraft CAN bus communication protocol, to implement the communication with large amount of data between subsystem simulation model and data handling subsystem. The simulation result verifies the validity of the communication method.


Motion Object Feature Extraction Method Based On Multi-Feature Fusion, Xidao Luan, Yuxiang Xie, Zhang Xin, Niu Xiao 2020 1. College of Computer Engineering and Applied Mathematics, Changsha University, Changsha 410003, China; ;

Motion Object Feature Extraction Method Based On Multi-Feature Fusion, Xidao Luan, Yuxiang Xie, Zhang Xin, Niu Xiao

Journal of System Simulation

Abstract: Motion object feature extraction is the basis of motion object classification. Traditionally motion object classification mainly depends on single feature extraction which is sensitive to the aspects like motion object detection area, angle, scale and noise disturbance, thus decreases the classification efficiency. To solve these problems and improve the robustness of the algorithms, a motion object feature extraction method based on multi-feature fusion was proposed. In this method, width height ratio feature, rotation invariant uniform local binary pattern feature and SIFT feature were considered, and by fusing them into the SVM and KNN classifier, motion object classification was carried …


Numerical Simulation Of Aluminum Foam Cushion Performance Analysis On Set-Forward Overload Of Fuze, Kuahai Yu, Xuhui Zhang, Hongyu Xu, Li Rong, Xingguo Kang 2020 1. Department of Engineering Mechanics, Henan University of Since and Technology, Luoyang 471023, China; ;

Numerical Simulation Of Aluminum Foam Cushion Performance Analysis On Set-Forward Overload Of Fuze, Kuahai Yu, Xuhui Zhang, Hongyu Xu, Li Rong, Xingguo Kang

Journal of System Simulation

Abstract: Buffering protect of fuze under high-speed impact was realized using aluminum foam gasket with special pore structure, and numerical simulation method to achieve the buffer validity analysis. Numerical model of three-layered concrete target projectile penetration was established, and the numerical model was validated to be accurate by comparing the fuze acceleration curves of simulation and experiment results. Numerical simulations were completed to predict the cushioning effect for different foamed aluminum structures. The result reveals that foamed aluminum cushioning can reduce the load of the fuze, and the foam's void ratio and thickness will significantly affect the cushioning performance, and …


Modeling And Realization Of Radar Signal Environment Based On Systemvue, Limin Liu, Cheng Cheng, Zhuangzhi Han 2020 Department of Electronic and Optical Engineering, Ordnance Engineering College, Shijiazhuang 050003, China;

Modeling And Realization Of Radar Signal Environment Based On Systemvue, Limin Liu, Cheng Cheng, Zhuangzhi Han

Journal of System Simulation

Abstract: Aiming at the practical requirements of electronic reconnaissance subsystem in an electronic countermeasure simulation system, according to electronic reconnaissance forms and the distribution of two parties, a modeling method of radar signal environment was proposed. It provided the mixed signals source for electronic reconnaissance subsystem. The signal modeling principle was proposed, which defined the position information of radar platform and target platform in trajectory layer. The angle information was defined in antenna layer, which realized radar signal modeling in signal layer. The radar signal environment simulation system of electronic countermeasure was established based on SystemVue at last. It is …


Location Method Of Insulators In Power Grid Patrol Aerial Images, Haiyan Cheng, Han Pu, Wang Di, Yongjie Zhai 2020 North China Electric Power University, Hebei Engineering Research Center of Simulation & Optimized Control for Power Generation,Baoding 071003, China;

Location Method Of Insulators In Power Grid Patrol Aerial Images, Haiyan Cheng, Han Pu, Wang Di, Yongjie Zhai

Journal of System Simulation

Abstract: A method to locate the insulators in the power grid patrol aerial images was proposed. OTSU algorithm improved by genetic algorithm was applied to segment insulators from backgrounds. The segmented images were filtered and reconstructed based on morphology algorithm. SketchUp software was used to build insulator samples, namely positive samples. The moment invariants of these samples and negative samples(background) were calculated respectively to train a classifier based on AdaBoost algorithm. By using the trained classifier, segmented insulators were classified and located coarsely. The Order Cut method (OC) was used to cut the original minimum circumscribed rectangle consisting of all …


Simulation Study On Price Control Model With Multiplicative Reference Effect, Yang Hui, Zhang Chen 2020 School of Economics and Management, Nanjing University of Science and Technology, Nanjing 210094, China;

Simulation Study On Price Control Model With Multiplicative Reference Effect, Yang Hui, Zhang Chen

Journal of System Simulation

Abstract: Considering customers' reference-dependent behavior, modeling and simulation study of the revenue management pricing problem with multiplicative reference effect was focused on, which defined the concept of multiplicative reference effect, described the characteristics of the reference effect function and the demand function with multiplicative reference effect, constructed the optimal control model with continuous time and continuous prices, proposed the Hamilton-Jacobi equation, provided simulation algorithm and designed simulation experiments to compare the pricing strategies under different demand circumstances. The simulation study shows that the reference effect has substantial impact on pricing paths and total revenues. The results provide management …


Simulation Of Coal Flow Movement Process In Coal And Gas Outburst Of Roadway Network, Zongxiang Li, Yadi Wang, Chunhua Zhang, Tianming Wang 2020 1. College of Safety Science and Engineering, Liaoning Technical University, Fuxin 123000, China; ;2. Key Laboratory of Mine Thermodynamic disasters and Control of Ministry of Education, Fuxin 123000, China; ;

Simulation Of Coal Flow Movement Process In Coal And Gas Outburst Of Roadway Network, Zongxiang Li, Yadi Wang, Chunhua Zhang, Tianming Wang

Journal of System Simulation

Abstract: In order to improve the simulation accuracy of the process in coal and gas outburst disaster period, time step method was put forward to describing the movement and accumulation of coal flow in roadway network when coal and gas outburst happened. Downward dip angles of tunnel were taken as the independent variables, model for distribution weight of coal output was built based on “Downward Priority” principle, and the model could adapt to downward roadway, nearly horizontal roadway and upward roadway. Strength change of outburst coal was established based on the collapse model. Combining with the coal and gas outburst …


Research And Application Of Cloud Manufacturing Service Platform For Crane, Yang Chen, Zhongjie Wang, Zhaohui Liu, Nana Yu 2020 1. College of Electronics and Information Engineering, Tongji University, Shanghai 201804, China; ;2. College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China;

Research And Application Of Cloud Manufacturing Service Platform For Crane, Yang Chen, Zhongjie Wang, Zhaohui Liu, Nana Yu

Journal of System Simulation

Abstract: Based on the research fruits of cloud manufacturing, the cloud manufacturing platform for crane was focused on. Based on the connotation analysis of the crane manufacturing, the key technologies of manufacturing resource access and cloud service modeling were discussed. A multi-level dynamic matching model and a comprehensive matching algorithm were proposed. The construction and testing of the cloud manufacturing platform was carried out, and the future works were given.


Modeling And Numerical Simulation Of Micro-Tube Scale Effects In 3dp Process, Congping Chen, Xiaoyun Wang, Jieguang Huang, Li Bo 2020 College of Mechanical & Power Engineering, China Three Gorges University, Yichang 443002, China;

Modeling And Numerical Simulation Of Micro-Tube Scale Effects In 3dp Process, Congping Chen, Xiaoyun Wang, Jieguang Huang, Li Bo

Journal of System Simulation

Abstract: Wall slip and viscous dissipation are two main scale effects in 3DP (Three dimensional printing) process, which has influences on the material's flow properties and thermophysical properties and the printing quality. According to the two phenomena above, theoretic models of wall slip and viscous dissipation were established, respectively, and the software Polyflow was used to study the two scale effects and their interactions with molten ABS in micro-tubes of different radius. Simulation results show that wall slip level increases with the slip coefficient decreasing, and material's velocity decreases with the increase of tube radius; Viscous dissipation level decreases …


Simulation And Improvement Of Automobile Front Cover Assembly Work Based On Delmia, Lizhen Zhang, Shao Qi, Jiaqing Yang, Mengmeng Yang, Song Zheng, Dai Peng 2020 1. College of Engineering Science & Technology, Shanghai Ocean University Shanghai 201306, China; ;

Simulation And Improvement Of Automobile Front Cover Assembly Work Based On Delmia, Lizhen Zhang, Shao Qi, Jiaqing Yang, Mengmeng Yang, Song Zheng, Dai Peng

Journal of System Simulation

Abstract: In order to prevent potential occupational disease in automobile front cover assembly location caused by manual handling, a comprehensive evaluation and improvement method of ergonomics was proposed aiming at front cover assembly work ergonomics based on DELMIA. The ergonomics problems in automobile front cover assembly were evaluated quantitatively and comprehensively by using the methods of rapid upper limb assessment (RULA) and lifting equation analysis (NIOSH), and the process or tools were judged whether they should be improved according to the evaluation results. By simulation, analysis and improvement of front cover assembly work, the improvement plans which aimed at the …


Impact Of ‘Small World' Social Network Of Consumers On Pricing Decision In Duopoly Market, Li Feng, Wei Ying 2020 1. School of Business Administration, South China University of Technology, Guangzhou 510640, China; ;

Impact Of ‘Small World' Social Network Of Consumers On Pricing Decision In Duopoly Market, Li Feng, Wei Ying

Journal of System Simulation

Abstract: Noticing the influences of friends on consumers purchasing decisions, the impact of ‘small world' social network on price competition in a duopoly hotelling model was studied. A multi-agent based modeling approach was proposed to represent the consumers' decisions, which related to their connected friends in a social network, as well as the firms' pricing decisions. Simulation results reveal that the ‘small world' social network has a significant impact on the competing firms' pricing decisions. In specific, with the increasing number of consumers who are impacted by their friends, or the increasing likelihood of following friends' decisions, consumers then …


Terminal Guidance Radar Modeling Research Based On Feature Parameter Stream, Anmin Zhang, Lianhu Cui 2020 No. 91336 Troop of PLA, Qinhuangdao 066000, China;

Terminal Guidance Radar Modeling Research Based On Feature Parameter Stream, Anmin Zhang, Lianhu Cui

Journal of System Simulation

Abstract: Aiming at the contradiction between computation and fidelity of terminal guidance radar model, the essential need of simulation was analyzed. Comparing the advantages and disadvantages of the existing radar electronic warfare modeling and simulation method, a modeling method was proposed based on feature parameter stream, building terminal guidance radar model for behavior description, giving the model parameter correction method based on historical test data, and combining the modeling and historical test information together. The comparison of the simulation and test results shows that, it can accurately describe the behavior of terminal guidance radar using the least amount of …


Maneuver Models Tracking Filter Of Nonballistic Near Space Targets, Qin Lei, Junlong Li 2020 Beijing Institute of Electronic System Engineering, Beijing 100854, China;

Maneuver Models Tracking Filter Of Nonballistic Near Space Targets, Qin Lei, Junlong Li

Journal of System Simulation

Abstract: Because hypersonic vehicles in the near space often adopt the way of nonballistic maneuver flight with characteristics of high speed and lift-to-drag ratio, flying in atmosphere for a long time, whose motion trajectories are sometimes characterized by “hopping”, their flight altitudes, flight velocities and flight accelerations change. Targets maneuver are characterized by long period maneuver, which has brought great difficulties with ground defense system for maneuvering target localization and tracking. Traditional filtering algorithms obviously cannot give accurate target state estimation, tracking performance has declined. The overview of tracking filter ways was given, introducing four typical nonballistic maneuver models of …


Evaluation And Analysis Of Land Intensive Utilization Based On Parameters Optimization Of Svm, Chen Li, Jiaojiao Li, Shulu Xiao 2020 1. School of Management, Anhui Jianzhu University, Hefei 230601, China;;

Evaluation And Analysis Of Land Intensive Utilization Based On Parameters Optimization Of Svm, Chen Li, Jiaojiao Li, Shulu Xiao

Journal of System Simulation

Abstract: Based on relevant literature research of evaluation on intensive land-use both at home and abroad, the theory of Support Vector Machine (SVM) and Ant Colony Algorithm (ACO) was discussed. A new method of Correlation Coefficient, the Ant Colony Algorithm and Support Vector Machine (cACO-SVM) was proposed, which analyzed the relevant indicators to determine index set, using ACO, optimization of SVM parameters to draw a good penalty factor C and kernel function sigma and epsilon insensitive coefficient and training SVM, the method improved the training accuracy. Optimization of the land intensive utilization evaluation based on cACO-SVM was put forward, comparing …


Numerical Simulation And Aerodynamic Effect Research For Multi-Warhead Projection, Yuan Wu 2020 Supercomputting Center, Computer Network Information Center, Chinese Academy of Sciences, Beijing 100190, China;

Numerical Simulation And Aerodynamic Effect Research For Multi-Warhead Projection, Yuan Wu

Journal of System Simulation

Abstract: In order to study the complex aerodynamic problem in multi-warhead projection, and also establish the practical analysis method for nonlinear aerodynamic characteristics, the separation process was simulated by using CFD technology as well as Monte Carlo method for a statistical research, while effects of the projection condition, multi-body intervene and unsteady characteristic during the separation process were discussed. The present research shows that the main forms of the submunition movement are radial separation and pitching movement; the direction of mass center motion and attitude motion is determined by the projection condition, however the attitude motion is also sensitive to …


Research On Reactor Modeling Simulation Based On Neutron Equivalence Homogeneous Theory, Ma Jin, Zhibin Liu, Bingshu Wang, Xinhui Duan 2020 Department of Automation North China Electric Power University, Beijing 102206, China;

Research On Reactor Modeling Simulation Based On Neutron Equivalence Homogeneous Theory, Ma Jin, Zhibin Liu, Bingshu Wang, Xinhui Duan

Journal of System Simulation

Abstract: A mathematical nuclear CANada Deuterium Uranium (CANDU) reactor steady and transient modelling simulation is built to get the axial thermal power distribution. With a relatively small number of nodes (100-500 nodes) to present the core, based upon two energy group Neutron Diffusion Formulation and a typical spatial discretization, according to equivalence theory and homogeneous method, this is accomplished by properly defining the nuclear properties (absorption and fission cross sections, diffusion coefficient, etc.) characterizing each of the nodes finished. The 390 channels thermal power distribution is calculated under Linux language environment. The thermal power difference is within 5% error with …


Study Of Im Parameter Identification Using Multi-Objective Particle Swarm Optimization With Proportional Guided Strategy, Huang Song, Tian Na, Wang Yan, Zhicheng Ji 2020 1. School of Internet of Things Engineering, Jiangnan University, Wuxi 214122, China;;

Study Of Im Parameter Identification Using Multi-Objective Particle Swarm Optimization With Proportional Guided Strategy, Huang Song, Tian Na, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: A multi-parameter and multi-objective identification model of induction motor was established, and a multi-objective particle swarm optimization based on Pareto set and all personal-best positions guided strategy was proposed and applied to the identification model. Not considerring the weighted coefficient of each objective, Pareto set is able to avoid subjective choice of the coefficients of multi-objective identification and proportion strategy with all personal-best positions guided could balance the learning ability from personal-best positions and global-best position. Having verified the performance on Matlab/Simulink, the results show that the proposed algorithm is able to improve parameter identification accuracy, and has …


Study On Influence Of Community Structure On Opinion Topic Propagation Of Micro-Blog, Hengmin Zhu, Hu Wei, Ma Jing, Wei Jing 2020 1. College of Management, Nanjing University of Posts and Telecommunications, Nanjing 210023, China;;

Study On Influence Of Community Structure On Opinion Topic Propagation Of Micro-Blog, Hengmin Zhu, Hu Wei, Ma Jing, Wei Jing

Journal of System Simulation

Abstract: Micro-blog gathers a large number of users, and community structure is a typical feature of Micro-blog network. In order to explore the influence of community structure on the opinion topic propagation of Micro-blog, users' psychology was analyzed for selecting their followees, and a model for constructing Micro-blog network was proposed which could modify community structure of network with a community factor. Experiments testify the effect of the community factor on micro-blog network structure, and use a SIR model to analyze the influence of different topic source nodes and community factors on the topic propagation of simulated networks. The result …


Digital Commons powered by bepress