Other Engineering Commons^™

Evaluating Prediction Models Of Creep And Drying Shrinkage Of Self-Consolidating Concrete Containing Supplementary Cementitious Materials/Fillers, Micheal Asaad, George Morcous

Durham School of Architectural Engineering and Construction: Faculty Publications

Supplementary cementitious materials (SCMs) and fillers play an important role in enhancing the mechanical properties and durability of concrete. SCMs and fillers are commonly used in self-consolidating concrete (SCC) mixtures to also enhance their rheological properties. However, these additives could have significant effects on the viscoelastic properties of concrete. Existing models for predicting creep and drying shrinkage of concrete do not consider the effect of SCM/filler on the predicted values. This study evaluates existing creep and drying shrinkage models, including AASHTO LRFD, ACI209, CEB-FIP MC90-99, B3, and GL2000, for SCC mixtures with different SCMs/fillers. Forty SCC mixtures were proportioned for …

The Facility Infection Risk Estimator™: A Web Application Tool For Comparing Indoor Risk Mitigation Strategies By Estimating Airborne Transmission Risk, Marcel Harmon, Josephine Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The COVID-19 pandemic created needs for (a) estimating the existing airborne risk of infection from SARS-CoV-2 in existing facilities and new designs and (b) estimating and comparing the impacts of engineering and behavioural strategies for contextually reducing that risk. This paper presents the development of a web application to meet these needs, the Facility Infection Risk Estimator™, and its underlying Wells–Riley based model. The model specifically estimates (a) the removal efficiencies of various settling, ventilation, filtration and virus inactivation strategies and (b) the associated probability of infection, given the room physical parameters and number of individuals infected present with either …

Designing Gfrp-Reinforced Tilt-Up Wall Panels, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Tilt-up construction was effectively enabled on a wide scale in 1979, when the ACI committee 551 report on Tilt-up construction was published, the Recommended Tilt-Up Wall Design, aka, the Yellow Book and the subsequent ACI-SEASC Task, aka the Green Book, and another Tilt-up design and construction manual developed by the ACI in 1988. The Tilt-up Concrete Association was created in 1986 by a group of industry professionals who had the need of an organization dedicated to the industry. ACI 551 maintains a document outlining the standard practice for contemporary Tilt-up design and construction. The ACI 551 document does not consider …

A Fire Protection Life Safety Analysis Of Multipurpose Building, Dalower Hossain

Fire Protection Engineering: Culminating Experience Project Reports

The following report is a fire and hazard protection analysis of a new building. This new building is a multi-purpose building called MPB locates in Gazipur, Dhaka, Bangladesh. The prescriptive requirements set by the codes and standards used at time of construction of the building have been met. The building has been properly classified with respect to occupancy as S1, Group B and F-1 and construction Type I A Sprinklered. Appropriate designs for interior partitions and exterior wall have been identified. Interior finish requirements have been analyzed for a better understanding of aesthetics guidelines. Based on the sprinkler drawing calculations, …

Towards Verifying Smartphone Users Via Gripping Hand Image Classification, Kaitlyn M. Madden

LSU Master's Theses

Smartphones continue to proliferate throughout our daily lives, not only in sheer quantity but also their ever-growing list of uses. They are no longer just for communication and the occasional phone game. Smartphones can be used to open garage doors, transfer money, see who is at your front door, and much, much more. With this increased dependence and use, smartphone security is critical. In this paper we propose a system to verify a user’s identity by applying a convolutional neural network (CNN) model to an image of the user’s hand while holding their device. This model aims to address situations …

A Study Of Methane-Liquid Absorption Characteristics For Gas Influx Management, Scott A. Perry

LSU Master's Theses

The study of absorption mass transfer kinetics in non-aqueous base fluids and the investigation of the parameters that influence this process is crucial in the application to gas influx management. While there have been a large number of studies investigating the interaction and solubility of methane in non-aqueous drilling fluids, relatively little attention has been placed on studying the mass transfer kinetics for different scenarios within the wellbore and riser. During the drilling process, there are multiple ways in which the formation gas can come into contact with the drilling fluid via a gas kick. Once the gas influx dissolves …

Solar Energy Certificate For Engineering Technology Students, Jesus A. Gonzalez-Rodriguez, Immanuel Edinbarough

Manufacturing & Industrial Engineering Faculty Publications

Solar Energy is the fastest-growing energy resource in the United States and the world. This industry just hit an important milestone in 2019 of completing two million solar systems installations in the country and is expected to duplicate this quantity by 2023.

Organizations and home and business owners in our South Texas region are starting to recognize the benefits of this type of renewable energy. And with the drop in the cost of the components and installation of the solar system, the future for this industry seems promising.

Our Program of Engineering Technology, which is part of the College of …

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

Performance Evaluation Of Gas Lift Valves Using Numerical Simulation, Felipe Simoes Maciel

LSU Master's Theses

This work aimed to assess the performance of two numerical simulation methods to replicate flow capacity test (FCT) results and predict the flow coefficient (Cv) and critical pressure ratio (Rcp) of gas lift valves (GLVs). FCT's use a modified GLV with an adjustable stem positioning system to obtain pressure as a function of flow rate for different stem positions to calculate Cv and Rcp. Therefore, this study used both a one-dimensional (1D) mechanistic model and computational fluid dynamics (CFD) to predict the same variable from the FCT without tests using modified GLVs. This methodology demonstrates accurate results, which were compared …

Handwriting Correction System Using Wearable Sleeve With Optimal Tactor Configuration, Dhanya Nair, Grant Stankaitis, Sean Duback, Robert Geoffrion, Justin B. Jackson

Engineering Faculty Articles and Research

Handwriting remains an elusive skill with practice worksheets being the common method of learning. Since these worksheets provide only visual feedback and no quantitative feedback, it can often be a challenge to improve. For children with learning disabilities, learning handwriting skills is one of the most difficult tasks. We propose a handwriting training system that uses off-the-shelf webcam, a pen tracking software and a haptic sleeve which provides active feedback to the user based on their deviation from the original pattern. The sleeve has 4 individual motors that vibrate at different intensities based on the direction (right, left, up or …

Scalability Of The Size Of Patterns Drawn Using Tactile Hand Guidance, Dhanya Nair

Engineering Faculty Articles and Research

Haptic feedback for handwriting training has been extensively studied, but with primary focus on kinematic feedback. We provide vibrotactile feedback through a wrist worn sleeve to guide the user to recreate unknown patterns and study the impact of vibrational duration (1, 2, 3 seconds) on pattern scaling. User traces a line at 90° angles, while attempting to maintain a constant speed, in the direction of the motor activated till a different motor activation is perceived. Shape and size are two features of good letter formation. Study performed on three subjects showed the ability to utilize four vibrotactile motors to guide …

Influencing Perceptions Of Stem Through The Best Stem Books List, Scott Bartholomew, Alexia Seymour

Faculty Publications

One day, while discussing engineering and science as potential career options with a female student, we opened a search engine and typed in “engineer” and “scientist.” However, on the first pages of image results, only one female appeared for engineering and only a few females appeared for “scientist” (see Figure 1). This disparity was disturbing—if this student never saw another person like her filling careers in STEM fields, would she ever “picture herself” in those fields?

A Comparison Between Ultrasonic Guidedwave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Decks, Ahmad Shoaib Amiri, Ece Erdogmus, Dana Richter-Egger

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the advantages and limitations of a recently developed Ultrasonic Guided Wave Leakage (UGWL) method in comparison to the well-known Half-Cell Potential (HCP) method in their ability to detect corrosion in reinforced concrete (RC) bridge decks. This research also establishes a correlation between UGWL data and chloride content in concrete RC slabs. Concrete slabs submerged in a 10% NaCl solution were monitored using both methods over a period of six months. The chloride content from the three cores (0.84, 0.55, and 0.18%) extracted from the slab after the 6-month long process all exceeded the chloride threshold values suggested …

Recent Trends In Software-Defined Networking: A Bibliometric Review, Jones Jefferson, Harikrishnan R

Library Philosophy and Practice (e-journal)

Software-Defined Networking is referred to as the next big thing in the field of networking. Legacy networks contain various components such as switches, routers, etc. with a variety of complex protocols. A network administrator is responsible for configuring all these various components. Apart from complex network management, network security is also a persistent issue in the field of networking. SDN promises simplicity in network management while also dramatically improving the security of networks. This paper gives an analysis of the current trends in in SDN as well as Security challenges with SDN. A bibliometric review on SDN has also been …

B-91 Fire Protection Analysis, Evan Phillips

Fire Protection Engineering: Culminating Experience Project Reports

B-91 is a multiuse building on a Department of Defense installation rented out to a defense contractor consisting of laboratory, office, storage, and utility spaces. To determine the adequacy of the building’s fire protection systems as determined by the state-adopted 2015 International Building Code, a prescriptive analysis was performed with specific areas of focus on the building construction and occupancy, emergency egress capacity, fire suppression systems, and fire alarm systems. The building is compliant with code requirements in its construction and the fire alarm systems are adequately designed to provide notice, but the egress from the building’s main conference room …

Fire Protection Analysis For The Tritium Engineering Building, Jack Smeck

Fire Protection Engineering: Culminating Experience Project Reports

This report analyzed several different aspects of the fire protection and life safety strategy for the Tritium Engineering Building (TEB) at the Savannah River Site in Aiken, SC. The TEB is a single-story, Type IIB building that primarily houses engineering and technical staff. The building is approximately 15,560 ft2 and consists of two large “open areas” enclosed by hard- wall offices. Modular workstations are located in both “open areas” and accommodate the majority of the building occupants. This analysis provided both a prescriptive and a performance-based approach for analyzing fire hazards within the building. The prescriptive- based analysis evaluated the …

College Sports Center Fire Protection Analysis, Elijah Kimmig

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this project was to analyze and compare the existing fire protection systems in the college sports center to current applicable codes and standards. Both prescriptive based analysis and performance based analyses were performed.

The prescriptive based analyses included analyzing the structural fire protection, fire suppression, fire alarm, and egress systems. Overall, the majority of the fire protection systems appeared to meet the requirements of the current codes but there are a few items that were found that appear to not meet current code. These items are listed below along with recommendations to mitigate: (1) Placement of certain …

Fire Protection Analysis Of Johnson Controls Office Building, Derek Driscoll

Fire Protection Engineering: Culminating Experience Project Reports

This project report contains a fire and life safety analysis of the Johnson Controls Office Building. The building is located in Los Angeles, California. The building is a mixed use occupancy with office spaces, meeting rooms, training rooms, and a warehouse for storing fire sprinkler and fire alarm materials. The building is one level with a mezzanine. It is attached to another building and separated by fire barrier so that they are considered separate buildings. This report contains a prescriptive analysis and a performance-based design analysis of the building.

The prescriptive code requirements were determined based on the 2019 edition …

Construction Innovation Center At California Polytechnic State University, James Hunter Gildart

Fire Protection Engineering: Culminating Experience Project Reports

The building of interest for this project is the Construction Innovation Center (CIC) at California Polytechnic State University, San Luis Obispo. The CIC consists of 3 structures (buildings A, B, and C) equipped throughout with a wet pipe automatic sprinkler system and a fire alarm system with smoke detection. This report reviews the prescriptive and performance-based requirements along with providing a fire safety management plan. The prescriptive based portion of this report covers egress, fire alarm, automatic fire sprinklers, flammability, and structural fire protection requirements. Upon completion of the prescriptive code analysis comparing the CIC to the 2015 International Building …