Nanoscience and Nanotechnology Commons^™

Investigating Quantum Oscillations In The Thermal Coefficient Of Resistivity Of Ultra-Thin Ag Capping Layers On Cu For Ic Interconnect Applications, Elroy Tatem

Legacy Theses & Dissertations (2009 - 2024)

As the semiconductor industry continues to scale feature sizes, scattering from phonons, surfaces, and grain boundaries result in an increase of metal interconnect resistivity in state-of-the-art integrated circuits (ICs). The interconnect chapter of the 2011 International Technology Roadmap for Semiconductors (ITRS) stated that there are currently no manufacturable solutions in the near term for suitable Cu replacements. Previous studies of thin Ag films deposited on Cu demonstrated oscillations in the electron-phonon interactions within the bilayer system. This thesis investigates oscillations in the resistive properties of the Ag/Cu bilayer system and discusses the applicability of these oscillations to the resistivity challenges …

Fluid Dynamic Modeling Of Nano-Thermite Reactions, Karen S. Martirosyan, Maxim Zyskin, Charles M. Jenkins, Yasuyuki Horie

Physics and Astronomy Faculty Publications and Presentations

This paper presents a direct numerical method based on gas dynamic equations to predict pressure evolution during the discharge of nanoenergetic materials. The direct numerical method provides for modeling reflections of the shock waves from the reactor walls that generates pressure-time fluctuations. The results of gas pressure prediction are consistent with the experimental evidence and estimates based on the self-similar solution. Artificial viscosity provides sufficient smoothing of shock wave discontinuity for the numerical procedure. The direct numerical method is more computationally demanding and flexible than self-similar solution, in particular it allows study of a shock wave in its early stage …

An Atomic Force Microscopy Nanoindentation Study Of Size Effects In Face-Centered Cubic Metal And Bimetallic Nanowires, Erin Leigh Wood

Graduate College Dissertations and Theses

The enhancement of strength of nanoscale materials such as face-centered cubic metal nanowires is well known and arises largely from processes mediated by high energy surface atoms. This leads to strong size effects in nanoscale plasticity; ,smaller is stronger. Yet, other factors, such as crystalline defects also contribute greatly to the mechanical properties. In particular, twin boundaries, which are pervasive and energetically favorable defects in face-centered cubic metal nanowires, have been shown to greatly enhance the strength, furthermore this increase in strength has been shown to be directly influenced by the twin density. However, attempts to control the …

Fabrication Of Yttrium Ferrite Nanoparticles By Solution Combustion Synthesis, A. A. Saukhimov, Mkhitar A. Hobosyan, Gamage C. Dannangoda, N. N. Zhumabekova, S. E. Kumekov

Physics and Astronomy Faculty Publications and Presentations

The ternary oxide system Y-Fe-O presents fascinating magnetic properties that are sensitive to the crystalline size of particles. There is a major challenge to fabricate these materials in nano-crystalline forms due to particle conglomeration during nucleation and synthesis. In this paper we report the fabrication of nano sized crystalline yttrium ferrite by solution combustion synthesis (SCS) where yttrium and iron nitrates were used as metal precursors with glycine as a fuel. The magnetic properties of the product can be selectively controlled by adjusting the ratio of glycine to metal nitrates. Yttrium ferrite nano-powder was obtained by using three concentration of …

Role Of Surface Chemistry In Nanoscale Electrokinetic Transport, Secuk Atalay

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation work presents the efforts to study the electrofluidics phenomena, with a focus on surface charge properties in nanoscale systems with the potential applications in imaging, energy conversion, ultrafiltration, DNA analysis/sequencing, DNA and protein transport, drug delivery, biological/chemical agent detection and micro/nano chip sensors.

Since the ion or molecular or particle transport and also liquid confinement in nano-structures are strongly dominated by the surface charge properties, in regards of the fundamental understanding of electrofluidics at nanoscale, we have used surface charge chemistry properties based on 2-pK charging mechanism. Using this mechanism, we theoretically and analytically showed the surface charge …

Characterization Of Airborne Particles Generated From Metal Active Gas Welding Processes, João F. Gomes

João F Gomes

No abstract provided.

Assessment And Control Of Nanoparticles Exposure In Welding Operations By Use Of A Control Banding Tool (Doi: 10.1016/J.Jclepro.2014.11.010), João F. Gomes

João F Gomes

No abstract provided.

Shaping Carbon Nanotube Forests For Field Emission, Ben Pound

Ben Pound

No abstract provided.

Bovine Serum Albumin (Bsa) And Cleaved-Bsa Conjugated Ultrasmallgd2o3nanoparticles: Synthesis, Characterization, And Application To Mri Contrast Agents, Md Wasi Ahmad, Cho Rong Kim, Jong Su Baeck, Yongmin Chang, Tae Jeong Kim, Ji Eun Bae, Kwon Seok Chae, Gang Ho Lee

Dr. Mohammad Wasi Ahmad (Md Wasi Ahmad)

No abstract provided.

Band Gap Engineered Tio2 Nanoparticles For Visible Light Induced Photoelectrochemical And Photocatalytic Studies, Mohammad Mansoob Khan Dr, S A. Ansari, D Pradhan, D H. Han, J Lee, M. H. Cho

Dr. Mohammad Mansoob Khan

Visible light-active TiO2 (m-TiO2) nanoparticles were obtained by an electron beam treatment of commercial TiO2 (p-TiO2) nanoparticles. The m-TiO2 nanoparticles exhibited a distinct red-shift in the UV-visible absorption spectrum and a much narrower band gap (2.85 eV) due to defects as confirmed by diffuse reflectance spectroscopy (DRS), photoluminescence (PL), X-ray diffraction, Raman spectroscopy, electron paramagnetic resonance, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS) and linear scan voltammetry (LSV). The XPS revealed changes in the surface states, composition, Ti4+ to Ti3+ ratio, and oxygen deficiencies in the m-TiO2. The valence band XPS, DRS and PL results were …

Optical Properties Of Gallium-Doped Zinc Oxide-A Low-Loss Plasmonic Material: First-Principles Theory And Experiment, Jongbum Kim, Gururaj V. Naik, Alexander V. Gavrilenko, Krishnaveni Dondapati, Vladimir I. Gavrilenko, S. M. Prokes, O. J. Glembocki, V. M. Shalaev, Alexandra Boltasseva

Birck and NCN Publications

Searching for better materials for plasmonic and metamaterial applications is an inverse design problem where theoretical studies are necessary. Using basic models of impurity doping in semiconductors, transparent conducting oxides (TCOs) are identified as low-loss plasmonic materials in the near-infrared wavelength range. A more sophisticated theoretical study would help not only to improve the properties of TCOs but also to design further lower-loss materials. In this study, optical functions of one such TCO, gallium-doped zinc oxide (GZO), are studied both experimentally and by first-principles density-functional calculations. Pulsed-laser-deposited GZO films are studied by the x-ray diffraction and generalized spectroscopic ellipsometry. Theoretical …

Surface Composition Structure And Electrochemical Performance Of Aluminum Doped Lifepo4, Huai-Fang Shang, Wei-Feng Huang, Wang-Sheng Hu, Ding-Guo Xia, Zi-Yu Wu

Journal of Electrochemistry

Despite there are many successful reports about the preparation of electrode materials with surface coating for lithium ion batteries, the study in surface self-coating of cathode materials using segregation of doping elements and their electrochemical properties is still very rare. The LiFePO₄ particles with rich-Al on the surface were synthesized by one step solvothermal route. TEM results demonstrated that the surface of the obtained LiFePO₄ particles was well-covered by the amorphous coating. The soft X-ray absorption spectroscopy (XAS) and Auger electron spectroscopy (AES) component analyses revealed that the amorphous coating was composed of LiFe_1-xAl_xPO …

Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li

Journal of Electrochemistry

Dispersed spherical Fe₃O₄ nanoparticles were synthesized by a hydrothermal method. The influences of odecyl trimethyl ammonium bromide (DTAB) concentration on the morphology and particle size of the as-prepared Fe₃O₄ were studied. Electrochemical performance of the as-prepared sample as anode materials of lithium ion battery was investigated. It is found that the as-prepared sample exhibits superior rate performance and cycle performance. The nano-sized materials provide structural stability and favor the transfer of lithium ions.

Synthesis And Electrochemical Performance Of Nano Licopo4 By Polyol Method, Fei Wang, Yang Jun

Journal of Electrochemistry

High potential LiCoPO₄ cathode material was synthesized by polyol method. Carbon layer of ca. 3 nm thick was coated on the LiCoPO4 surfaces by chemical vapor deposition from methylbenzene. Crystalline structure, morphology and electrochemical performance of the sample were studied by XRD, SEM, TEM, CV and galvanostatic charge/discharge curve. The synthesized material via polyol method showed a pure phase of LiCoPO₄. The LiCoPO₄/C electrode delivered a high discharge capacity of 132 mAh·g^-1 and maintained 78% of the initial capacity after 50 cycles at 0.1C rate. The two-step extraction/insertion behavior of Li⁺ in LiCoPO4/C …

Spatial Spectrograms Of Vibrating Atomic Force Microscopy Cantilevers Coupled To Sample Surfaces, Ryan Wagner, Arvind Raman, Roger Proksch

Birck and NCN Publications

Many advanced dynamic Atomic Force Microscopy (AFM) techniques such as contact resonance, force modulation, piezoresponse force microscopy, electrochemical strain microscopy, and AFM infrared spectroscopy exploit the dynamic response of a cantilever in contact with a sample to extract local material properties. Achieving quantitative results in these techniques usually requires the assumption of a certain shape of cantilever vibration. We present a technique that allows in-situ measurements of the vibrational shape of AFM cantilevers coupled to surfaces. This technique opens up unique approaches to nanoscale material property mapping, which are not possible with single point measurements alone. (C) 2013 AIP Publishing …

Biogenic Synthesis, Photocatalytic, And Photoelectrochemical Performance Of Ag–Zno Nanocomposite, S. A. Ansari, Mohammad Mansoob Khan Dr, M. O. Ansari, J. Lee, M. H. Cho

Dr. Mohammad Mansoob Khan

The development of coupled photoactive materials (metal/semiconductor) has resulted in significant advancements in heterogeneous visible light photocatalysis. This work reports the novel biogenic synthesis of visible light active Ag–ZnO nanocomposite for photocatalysis and photoelectrode using an electrochemically active biofilm (EAB). The results showed that the EAB functioned as a biogenic reducing tool for the reduction of Ag+, thereby eliminating the need for conventional reducing agents. The as-prepared Ag–ZnO nanocomposite was characterized by X-ray diffraction, transmission electron microscopy, diffuse reflectance spectroscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic experiments showed that the Ag–ZnO nanocomposite possessed excellent visible light photocatalytic activity …

The Role Of Oxygen In The Uptake Of Deuterium In Lithiated Graphite, C. N. Taylor, J. Dadras, Kara E. Luitjohan, Jean P. Allain, P. S. Kristic, C. H. Skinner

Birck and NCN Publications

We investigate the mechanism of deuterium retention by lithiated graphite and its relationship to the oxygen concentration through surface sensitive experiments and atomistic simulations. Deposition of lithium on graphite yielded 5%-8% oxygen surface concentration and when subsequently irradiated with D ions at energies between 500 and 1000 eV/amu and fluences over 10(16) cm(-2) the oxygen concentration rose to between 25% and 40%. These enhanced oxygen levels were reached in a few seconds compared to about 300 h when the lithiated graphite was allowed to adsorb oxygen from the ambient environment under equilibrium conditions. Irradiating graphite without lithium deposition, however, resulted …

Vapor–Liquid–Solid Growth Of Serrated Gan Nanowires: Shape Selection Driven By Kinetic Frustration, Zheng Ma, Dillon Mcdowell, Eugen Panaitescu, Albert V. Davydov, Moneesh Upmanyu, Latika Menon

Moneesh Upmanyu

Compound semiconducting nanowires are promising building blocks for several nanoelectronic devices yet the inability to reliably control their growth morphology is a major challenge. Here, we report the Au-catalyzed vapor–liquid–solid (VLS) growth of GaN nanowires with controlled growth direction, surface polarity and surface roughness. We develop a theoretical model that relates the growth form to the kinetic frustration induced by variations in the V(N)/III(Ga) ratio across the growing nanowire front. The model predictions are validated by the trends in the as-grown morphologies induced by systematic variations in the catalyst particle size and processing conditions. The principles of shape selection highlighted …

A Study Of Titania Nanotube Synthesis In Chloride-Ion-Containing Media, E. Panaitescu, C. Richter, L. Menon

Eugen Panaitescu

We have completed a detailed experimental investigation into the recently discovered synthesis of titania nanotubes in chloride-ion-containing media. We show that the role of the chloride ions is catalytic and it has a strong effect in increasing the reactivity of the solution, while the nature of cations has no visible role. We have identified the critical parameters for optimal growth and fast production of nanotubes, and a basic growth mechanism for the tubes is proposed. This opens routes for significant improvements of the method toward uniformity and/or better overall yield, making it a viable alternative to the present established methods.

Toward Tailored Functionality Of Titania Nanotube Arrays: Interpretation Of The Magnetic-Structural Correlations, Pegah M. Hosseinpour, Eugen Panaitescu, Don Heiman, Latika Menon, Laura H. Lewis

Eugen Panaitescu

Ordered arrays of titania nanotubes (NTs) are considered as good candidates for photocatalytic applications including water splitting. Considering that the functionality of these nanostructures is influenced by their morphology, electronic and the crystallographic structure, fundamental understanding of these properties and their possible correlations can clarify the approaches toward enhanced photocatalytic efficiency. In this work, ordered arrays of titania NTs are synthesized electrochemically and are subjected to isochronal annealing treatments in various atmospheres (oxygen-rich, oxygen-deficient and reducing) to modify their morphology, crystal and electronic structure. Upon characterization of these NTs, direct correlations are found between the annealing atmosphere and the corresponding …