Industrial Engineering Commons^™

Progress In Autonomous Picking As Demonstrated By The Amazon Robotics Challenge, Dominik Colling, Jonathan Dziedzitz, Kai Furmans, Patric Hopfgarten, Kai Markert

International Material Handling Research Colloquium

Poster 17

Service Flow Networks For Functional Design Of Distribution Centers, Michael Schmidt, Detlef A. Spee, Michael Ten Hompel

International Material Handling Research Colloquium

Poster 15

A Design Methodology To Optimize Supply Chain Network Performance, Dheeraporn Nippaya, J. David Porter

International Material Handling Research Colloquium

Poster 5

Synthetic Order Generator For Picking Data, Mohammadnaser Ansari, Jeffrey S. Smith, Behnam Rasoolian

International Material Handling Research Colloquium

Poster 4

A Space-Syntax Analysis Of The Relationship Between Function And Form In Facility Layout, Alejandro Teran-Somohano, Alice E. Smith

International Material Handling Research Colloquium

Poster 1

Optimization Of A Fast-Pick Area In Cosmetics Distribution Center, Mario C. Velez-Gallego, Alice E. Smith

International Material Handling Research Colloquium

Poster 18

Pull-Driven Order Fulfillment In Distribution Centers, Dima Nazzal, Shankar Shanmugasundaram, Sung Kim, Russell D. Meller

International Material Handling Research Colloquium

Poster 22

Scalable Heuristic For Locating Distribution Centers On Real Road Networks, Saeed Ghanbartehrani, J. David Porter

International Material Handling Research Colloquium

Poster 13

Keynote: The Small World Of Material Handling Rearch, Parag J. Siddique, Kevin Gue, Md Salahuddin Ayuby

International Material Handling Research Colloquium

Keynote Address

Panel Session #1: Production Logistics In The Industrie 4.0 Era, Kai Furmans, Fabio Sgarbossa, Tone Lerher

International Material Handling Research Colloquium

Panel Session 1

Panelists: Kai Furmans, Fabio Sgarbosse, Tone Lehrer

Moderator: David Porter

Deployment Of An Distributed Strategic Material Flow Control For Automated Material Flow Systems Consisting Of Autonomous Modules, Christian Lieberoth-Leden, Johannes Fottner

International Material Handling Research Colloquium

Poster 10

Managing The Order Picking Process In For Click And Collect In Grocery Stores, Dale T. Masel, Akhilesh Mesa

International Material Handling Research Colloquium

Poster 14

Improving The Environmental Sustainability Of Pallet Logistics Through Preemptive Remanufacturing: An Integer Linear Optimization Model, Fabiana Tornese, Jennifer A. Pazour, Andres L. Carrano, Brian K. Thorn

International Material Handling Research Colloquium

Poster 2

Differences In The Throughput Performance Of The Warehouse Depending On The Quality Of The Calculation Parameters, David Sourek

International Material Handling Research Colloquium

Poster 25

Impact Of Automonous Delivery And Last-Mile Logistics, Michael G. Kay, Peerapol Sittivijan, Bhagyalakshmi V. Shrikrishna, Bharat Kulkarni

International Material Handling Research Colloquium

Poster 19

A Practical Collaborative Material Handling Strategy For Cross-Docks, Hector J. Carlo, Stephanie Santiago-Montano

International Material Handling Research Colloquium

Poster 8

Economic And Performance Analysis Of Dual-Bay Vertical Lift Modules, Fabio Sgarbossa, Martina Calzavara, Alessandro Persona

International Material Handling Research Colloquium

Poster 3

A Motion Capture System Framework For The Study Of Human Manufacturing Repetitive Motion, Jesus Jimenez, Francis Mendez, David Wierschem

International Material Handling Research Colloquium

Poster 21

15th International Material Handling Research Colloquium Program, College Industry Council On Material Handling Education, Mhi

International Material Handling Research Colloquium

Official Conference Program

An Optimal Airline Revenue Management Seat Pricing Plan Model, Constantine M. Koursaris, James W. Marion Jr.

International Journal of Aviation, Aeronautics, and Aerospace

The goal of an airline is to sell tickets at the highest fare possible, thus yielding maximum profit for the stakeholders. As airline seat pricing is divided into different fare classes, a revenue management system is created and maintained to identify opportunity costs where the airline may sell an optimum number of available seats in both discounted fare and full fare classes. Ideally, under perfect conditions, the airline will sell all available seats at full capacity for each leg of a trip. Under non-ideal conditions for the airline, not all available seats may sell at either full fare or discounted …

In Vitro Cytocompatibility Of Antibacterial Levels Of Polymer Nitric Oxide Release, Rana Gbyli, Christina Zito, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

Although the antibacterial property of nitric oxide (NO) has been well documented in gram positive and gram negative bacteria cultures, its cytotoxic effects are not completely clear. To limit potential in vivo cytotoxicity, our group recently investigated the effects of a range of NO fluxes on S. epidermidis and S. aureus to determine a minimum effective NO level. In this study, we report the antibacterial function of this minimum NO level also on gram negative Pseudomonas aeruginosa as well as its cytocompatibility effects on lung and kidney cells. Standardized bacterial cultures were treated with NO releasing PDMS substrates followed by …

Tooling For Injection Molding Using Laser-Powder Bed Fusion., Mohith Ram Buxani

Electronic Theses and Dissertations

Laser-Powder Bed Fusion (L-PBF) has been considered for some time by the injection molding industry for the fabrication of tooling for injection molding in order to address large lead times and costs for tool-making. Computer-aided simulations are also routinely used to evaluate new part and mold designs as well as understanding the effects of material compositions and processing conditions on part quality and overall productivity. However, there remains a significant need to integrate the perspectives from injection molding, 3D printing, metal powders, and component design and process simulation to better utilize LPBF for fabricating tooling required for injection molding. The …

A Representation Of Tactical And Strategic Precursors Of Supply Network Resilience Using Simulation Based Experiments, Yaneth C. Correa-Martinez

Engineering Management & Systems Engineering Theses & Dissertations

Modern supply chains are becoming increasingly complex and are exposed to higher levels of risk. Globalization, market uncertainty, mass customization, technological and innovation forces, among other factors, make supply networks more susceptible to disruptions (both those that are man-made and/or ones associated with natural events) that leave suppliers unavailable, shut-down facilities and entail lost capacity.

Whereas several models for disruption management exist, there is a need for operational representations of concepts such as resilience that expand the practitioners’ understanding of the behavior of their supply chains. These representations must include not only specific characteristics of the firm’s supply network but …

A Framework For Executable Systems Modeling, Matthew Amissah

Engineering Management & Systems Engineering Theses & Dissertations

Systems Modeling Language (SysML), like its parent language, the Unified Modeling Language (UML), consists of a number of independently derived model languages (i.e. state charts, activity models etc.) which have been co-opted into a single modeling framework. This, together with the lack of an overarching meta-model that supports uniform semantics across the various diagram types, has resulted in a large unwieldy and informal language schema. Additionally, SysML does not offer a built in framework for managing time and the scheduling of time based events in a simulation.

In response to these challenges, a number of auxiliary standards have been offered …

4-D Printing Of Pressure Sensors And Energy Harvesting Devices For Engineering Education, Tzu-Liang Bill Tseng, Aditya Akundi, Hoejin Kim

Manufacturing & Industrial Engineering Faculty Publications

This paper elaborates on the development of laboratory project modules in the Industrial manufacturing and systems engineering department at The University of Texas El Paso based on Four-Dimensional (4D) printing technology. These modules are aimed at introducing the students to interdisciplinary manufacturing and emerging dimensions in manufacturing technology. 4D printing is a new dimension in additive manufacturing wherein, the 3D printed structures react to the change of parameters within the environment such as temperature, and humidity, resulting in shape change or in functionality such as electricity output, and self-healing. Recently 4D printing of simple devices for pressure sensors application were …

Fixing Vertebral Compression Fractures With Medtronic, Kelly Fitzgerald, Trevor Bingham, Alex Denbaugh, Jordan Tang, Jon Stearns

Industrial and Manufacturing Engineering

No abstract provided.

Connected Alerts Across Manufacturing Facilities, Jordan J. Moy

Industrial and Manufacturing Engineering

The lack of communication during a large project can result in costly delays when striving to achieve previously defined benchmarks. Often times, each part of a project will require verification from an employee of a specified area of expertise before being allowed to advance to the next stage. Finding these individuals can be extremely hard due to the large, spread out campus of manufacturing facilities as well as the numerous projects the company is concurrently working on. These floor support requests can sometimes take from an hour to even a whole work day, causing major delays in the production schedule. …

Process Improvement At "The Manse On Marsh", Kevin C. Manko

Industrial and Manufacturing Engineering

The Manse on Marsh is an independent and assisted living facility that prides itself on providing life-enriching care for the elderly. Considering that the staff is essential to supply this care and turnover rates are a constant factor, the company would like to reduce the time it takes to hire new employees by at least one week. To facilitate this goal, process flow maps are utilized to assess the current state of the hiring process and metrics are applied to support future state design decisions. After performing a value added analysis and identifying areas of waste, a total of 20 …

High Bay Capacity Utilization Tool, Dante C. Mazzanti, Skyler L. Schilke, Conner P. Lawston

Industrial and Manufacturing Engineering

Northrop Grumman’s Space Park facility has many inefficiencies in their high bay scheduling processes. Additionally, it is very hard for project managers to figure out the capabilities of each high bay in order to schedule their specific project. The purpose of this project is to develop a tool that can be used across the facility to easily create projects, assign projects, view room capabilities, and view a master schedule of the rooms. After researching commercially available tools, our approach to designing this system was to use tools that are already utilized at the facility (Microsoft Suite and Tableau) and engineer …

Design And Testing Of A Hands-Free Toilet Seat Opener/Closer, Jordan Benjamin Schaeffer

Industrial and Manufacturing Engineering

People tend to get frustrated when the toilet seat must be moved up or down before use. Men and women often leave the toilet seat in different positions when finished which can cause problems when men and women use the same bathroom. With gender neutral bathrooms gaining in popularity, this frustration will only increase. The objective of this project was to design and test a hands-free system to allow a user to quickly and easily open or close a toilet seat. For the product to be viable, it will have to be durable and easy to clean around, while also …