Mechanical Engineering Commons^™

Passivation Of Defects In Perovskite Materials For Improved Solar Cell Efficiency And Stability, Jinsong Huang, Xiaopeng Zheng

Department of Mechanical and Materials Engineering: Faculty Publications

Semiconductor devices, and methods of forming the same, include a cathode layer, an anode layer, and an active layer disposed between the cathode layer and the anode layer, wherein the active layer includes a perovskite layer. A passivation layer is disposed directly on a surface of the active layer between the cathode layer and the active layer, the passivation layer including a layer of material that passivates both cationic and anionic defects in the surface of the active layer.

3d Printing Of Multilayered Scaffolds For Rotator Cuff Tendon Regeneration, Xiping Jiang, Shaohua Wu, Mitchell Kuss, Yunfan Kong, Wen Shi, Philipp N. Streubel, Tieshi Li, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Repairing massive rotator cuff tendon defects remains a challenge due to the high retear rate after surgical intervention. 3D printing has emerged as a promising technique that enables the fabrication of engineered tissues with heterogeneous structures and mechanical properties, as well as controllable microenvironments for tendon regeneration. In this study, we developed a new strategy for rotator cuff tendon repair by combining a 3D printed scaffold of polylactic-co-glycolic acid (PLGA) with cell-laden collagen-fibrin hydrogels. We designed and fabricated two types of scaffolds: one featuring a separate layer-by-layer structure and another with a tri-layered structure as a whole. Uniaxial tensile tests …

Imparities Of Shear Avalanches Dynamic Evolution In A Metallic Glass, Yin Du, Qing Zhou, Qian Jia, Yidi Shi, Haifeng Wang, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

The imparities of shear avalanches dynamic evolution under nanoindentation originating from the soft regions and the stiff matrix were explored in a metallic glass by statistical and dynamic analysis. Upon the continuous indentation process, the dynamic state of the stiff matrix exhibits a transition from a chaotic behavior to a self-organized critical (SOC) behavior, whereas the soft regions are domi-nated by the SOC behavior throughout the indentation process. The mechanism was clarified by the evolution of the cut-off size of shear avalanches. These findings might advance our fundamental understanding of inhomogeneous deformation on microscale.

IMPACT STATEMENT The shear avalanches dynamic …

Foundry Sand Source Reduction Options: Life Cycle Assessment Evaluation, Samuel Ghormley, Robert Williams, Bruce Dvorak

Department of Mechanical and Materials Engineering: Faculty Publications

Foundries represent a significant part of the world’s economy and are a large consumer of energy and producer of solid waste. Sand-handling processes can use 5–10% of a foundry’s total energy. The goal of this research was to explore source reduction and waste minimization at a foundry, using both economic and Life Cycle Assessment (LCA) techniques to compare three secondary sand-reclamation options. LCA software modeled all sand processes at a mid-sized ferrous foundry in the USA. The LCA showed all secondary reclamation technologies, while more energy intensive at the foundry, lowered life cycle environmental impacts, including GHG emissions, ecotoxicity, and …

An Overview Of Additive Manufacturing Technologies—A Review To Technical Synthesis In Numerical Study Of Selective Laser Melting, Abbas Razavykia, Eugenio Brusa, Cristiana Delprete, Reza Yavari

Department of Mechanical and Materials Engineering: Faculty Publications

Additive Manufacturing (AM) processes enable their deployment in broad applications from aerospace to art, design, and architecture. Part quality and performance are the main concerns during AM processes execution that the achievement of adequate characteristics can be guaranteed, considering a wide range of influencing factors, such as process parameters, material, environment, measurement, and operators training. Investigating the effects of not only the influential AM processes variables but also their interactions and coupled impacts are essential to process optimization which requires huge efforts to be made. Therefore, numerical simulation can be an effective tool that facilities the evaluation of the AM …

Facile Production Of Large-Area Cell Arrays Using Surface-Assembled Microdroplets, Karla Perez-Toralla, Angel Olivera-Torres, Mark A. Rose, Amir Monemian Monemianesfahani, Keerthana Reddy, Ruiguo Yang, Stephen Morin

Department of Mechanical and Materials Engineering: Faculty Publications

Techniques that enable the spatial arrangement of living cells into defined patterns are broadly applicable to tissue engineering, drug screening, and cell–cell investigations. Achieving large-scale patterning with single-cell resolution while minimizing cell stress/damage is, however, technically challenging using existing methods. Here, a facile and highly scalable technique for the rational design of reconfigurable arrays of cells is reported. Specifically, microdroplets of cell suspensions are assembled using stretchable surface-chemical patterns which, following incubation, yield ordered arrays of cells. The microdroplets are generated using a microfluidic- based aerosol spray nozzle that enables control of the volume/size of the droplets delivered to the …

Characteristic Boundaries Associated With Three-Dimensional Twins In Hexagonal Metals, Shujuan Wang, Mingyu Gong, Rodney J. Mccabe, Laurent Capolungo, Jian Wang, Carlos N. Tomé

Department of Mechanical and Materials Engineering: Faculty Publications

Twinning is a critically important deformation mode in hexagonal close-packed metals. Twins are three-dimensional (3D) domains, whose growth is mediated by the motion of facets bounding the 3D twin domains and influences work hardening in metals. An understanding of twin transformations therefore necessitates that the atomic-scale structure and intrinsic mobilities of facets be known and characterized. The present work addresses the former point by systematically characterizing the boundary structures of 3D { ̄1012} twins in magnesium using high-resolution transmission electron microscopy (HRTEM). Eight characteristic facets associated with twin boundaries are reported, five of which have never been experimentally observed before. …

Fluid Mechanics Education Using Japanese Anime: Examples From “Castle In The Sky” By Hayao Miyazaki, Sangjin Ryu, Haipeng Zhang, Markeya S. Peteranetz, Tareq Daher

Department of Mechanical and Materials Engineering: Faculty Publications

Current K-12 and undergraduate student have grown up with constant exposure to visual popular culture (e.g., movies, TV programs, graphic novels, etc.). Because youth find pop culture references in the classroom to be engaging, many science and engineering instructors have shown that examples found in visual pop culture can be used to teach science and engineering concepts.1,2 One recent study on the efficay os using pop ulture for instruction found that high school studetns learning from graphic-novel styles comics acquired deeper understanding of complex subject matter and reported higher engagement with the instructional materials as compared to students learning from …

Rotating-Liquid-Based Hydrogel Bead Generator, Haipeng Zhang, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Hydrogel beads are widely used in various applications, but producing such beads often requires complicated devices. Instead, we propose an easy-to-adopt, cost effective, open source hydrogel bead generator. This generator consists of two modules. The first module rotates two immiscible liquids in rigid body motion: mineral oil as the continuous phase (CP) liquid on top, and a hydrogel cross-linking (CL) liquid at bottom. The second module injects a hydrogel pre-polymer solution as the dispersed phase (DP) liquid into the rotating CP liquid. As the DP liquid flows out of a syringe needle, its drops are pinched off by the shear …

Assistive Rehabilitation Elliptical System, Carl Nelson, Cale J. Stolle, Judith M. Burnfield, Thad W. Buster, Bernadette Mccrory

Department of Mechanical and Materials Engineering: Faculty Publications

An elliptical system is disclosed having a crank assembly configured to be adjusted in length to accommodate users having varying gaits. In some embodiments, the crank assembly includes a crank and an axle connection bracket that is slidably adjustable with respect to the crank. For example, the crank assembly can include a crank link having a longitudinal body, where the longitudinal body is connected to the crank at one end and includes a longitudinal slots slidably coupled with the axle connection bracket. The axle connection bracket is configured to slide through a plurality of positions along the longitudinal body. In …

Role Of Active Nanoliposomes In The Surface And Bulk Mechanical Properties Of Hybrid Hydrogels, R. Kadri, J. Bacharouch, K. Elkhoury, G. Ben Messaoud, C. Kahn, S. Desobry, M. Linder, Ali Tamayol, G. Francius, J.F. Mano, L. Sanchez-Gonzalez, E. Arab-Tehrany

Department of Mechanical and Materials Engineering: Faculty Publications

Nanoliposomes are widely used as delivery vehicles for active compounds. Nanoliposomes from rapeseed phospholipids were incorporated into interpenetrating polymer network hydrogels of gelatin methacryloyl and alginate. The multiscale physicochemical properties of the hydrogels are studied both on the surface and through the thickness of the 3D network. The obtained composite hydrogels exhibited strong mechanical properties and a highly porous surface. The blend ratio, as well as the concentration of nanoliposomes, affects the properties of the hydrogels. Nanofunctionalized hydrogels induced keratinocyte growth. These advantageous characteristics may open up many applications of the developed hydrogels in drug delivery and tissue engineering

Narrow Band Perovskite Single Crystal Photodetectors With Tunable Spectral Response, Jinsong Huang, Yanjun Fang

Department of Mechanical and Materials Engineering: Faculty Publications

Photoelectronic devices using perovskite single-crystal materials having a narrow spectral response, e.g., with a full-width-at-half-maximum response of less than about 20 nm, are provided. The response spectra are continuously (in frequency band) settable or tunable, e.g., from blue to red, by changing the halide composition and thus the band gap of the single crystals. The narrow-band response can be explained by the strong surface charge recombination of the excess carriers lose to the crystal surfaces generated by short wavelength light. The excess carriers generated by below-band gap excitation locate away from the surfaces and can be much more efficiently collect …

Crystallographic Orientation Dependence [email protected] Mechanical Responses Of Fecral Micropillars, Dongyue Xie, Binqiang Wei, Wenqian Wu, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Iron-chromium-aluminum (FeCrAl) alloys are used in automobile exhaust gas purifying systems and nuclear reactors due to its superior high-temperature oxidation and excellent corrosion resistance. Single-phase FeCrAl alloys with a body centered cubic structure plastically deform through dislocation slips at room temperature. Here, we investigated the orientation dependence of mechanical responses of FeCrAl alloy through testing single-crystal and bi-crystal micropillars in a scanning electron microscopy at room temperature. Single-crystal micropillars were fabricated with specific orientations which favor the activity of single slip system or two slip systems or multiple slip systems. The strain hardening rate and flow strength increase with increasing …

Hydrogel Microphone, Li Tan, Yang Gao, Qin Zhou, Yongmei Chen

Department of Mechanical and Materials Engineering: Faculty Publications

A device includes a capacitive sensor having a hydrogel structure that includes a first surface and a second surface. A first electrode is provided at the first surface of the hydrogel structure, the first electrode including a network of conductive nanoparticles extending into the hydrogel structure. A second electrode is provided at the second surface of the hydrogel structure.

Low Velocity Impact Of Hybrid Stacked Steel Plates, H. Hadidi, R. Q. Feng, M. P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Designing and manufacturing high-strength, low-weight parts with enhanced impact resistance is highly sought after in the transportation industry. The most common methods to improve strength-to-weight ratios of impact targets is a composite material composition or a favorable geometric design. An alternative method to improve impact performance is functionally gradient mechanical properties in a single material by hybrid additive stacking. In this study, low-velocity impact tests were conducted on hybrid stacked 1070 steel plates where individual layers were subjected to shot peening (SP) to functionally grade mechanical properties. Hybrid additive stacking refers to secondarily processing preferential layers within a stacked build …

Challenges In Path Planning Of High Energy Density Beams For Additive Manufacturing, Karunakaran K. P, Seema Negi, Arun Nambolan, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael P. Sealy, Alain Bernard

Department of Mechanical and Materials Engineering: Faculty Publications

As there are no cutting forces in High Energy Density (HED) beams like lasers and Electron Beam (EB), their speeds are limited only by their positioning systems. On the other hand, as the entire matrix of the 3D printed part has to be addressed by the thin beam in multiple passes in multiple layers, they have to travel several kilometers in tiny motions. Therefore, the acceleration of the motion system becomes the limiting factor than velocity or precision. The authors have proposed an area-filling strategy for EB to fill the layer with optimal squares to exploit analog and hardware computing. …

A Reduced Model For Microbial Electrolysis Cells, Dina Aboelela, Moustafa A. Soliman, Ibrahim Ashour

Chemical Engineering

Microbial electrolysis cells (MECs) are breakthrough technology of cheap hydrogen production with high efficiency. In this paper differential-algebraic equation (DAE) model of a MEC with an algebraic constraint on current was studied, simulated and validated by implementing the model on continuous-flow MECs. Then sensitivity analysis for the system was effectuated. Parameters which have the predominating influence on the current density and hydrogen production rate were defined. This sensitivity analysis was utilized in modeling and validation of the batch-cycle of MEC. After that parameters which have less influence on MEC were eliminated and simplified reduced model was obtained and validated. Finally, …

Artificial Intelligence In Plasma Electrolytic Micro-Oxidation For Surface Hardening - Insights From Scholarly Citation Networks And Patents., Priya Jadhav, Dr.Arun Bongale, Dr.Satish Kumar, Dr.Amit Kumar Tiwari

Library Philosophy and Practice (e-journal)

Objective - The purpose of this article is to analyze the top work areas and patent domains in the field of surface hardening by micro-arc oxidation. Also, it is directed on the opportunities of data analysis by different machine learning tools. Material and methods - The www.lens.org database is used to collect articles from Elsevier, Trans tech publications, Springer New York, MDPI, etc. to review the relevant articles as well as patents related to the topic. The result - A total of 1057 articles were published in 60 different journals and 756 patents in the area of research under various …

อิทธิพลของการใช้บริการ Cu Toyota Ha:Mo ที่ส่งผลกระทบต่อการเดินทางภายในจุฬาลงกรณ์มหาวิทยาลัย, ธนพนธ์ มธุรเวช

Chulalongkorn University Theses and Dissertations (Chula ETD)

การวิจัยนี้มีจุดประสงค์เพื่อศึกษาอิสระและทางเลือกในการเดินทาง โดยในการศึกษานี้จะพิจารณาความแตกต่างของบริเวณพื้นที่ทั้งบริเวณที่มีสถานีบริการ Ha:mo และบริเวณที่ไม่มีสถานีบริการ Ha:mo เพื่อให้ทราบถึงผลจากการพัฒนาของพื้นที่ดังกล่าว การศึกษานี้ใช้ดัชนีชี้วัดการเข้าถึงพื้นที่ โดยแสดงผลลัพธ์ในรูปแบบของโครงข่ายปริภูมิ การเก็บข้อมูลได้จากกลุ่มผู้ใช้บริการ Ha:mo ในระยะยาว ตั้งแต่เดือน ตุลาคม - พฤศจิกายน พ.ศ. 2562 จํานวน 3,587 ข้อมูล ในขณะนั้นมีสถานีบริการ Ha:mo ทั้งหมด 22 สถานี และมีการเก็บข้อมูลในสถานการณ์เดินทางจริง จากรูปแบบการเดินทางต่าง ๆ ได้แก่ การเดิน, การใช้รถโดยสารสาธารณะประจําทาง, การใช้รถ ปอ.พ. ของจุฬาลงกรณ์มหาวิทยาลัย และการใช้บริการ Ha:mo จากผลการวิเคราะห์ พบว่า การใช้บริการ Ha:mo สามารถอํานวยความสะดวกในการเดินทางได้มากกว่าการใช้รถโดยสารสาธารณะ และรถ ปอ.พ. ของจุฬาลงกรณ์มหาวิทยาลัย ผู้เดินทางที่กําลังวางแผนจะเดินทางด้วยระบบขนส่งสาธารณะ จะมีช่วงเวลาในการเดินทางที่นานกว่าปกติ ในขณะที่ ผู้เดินทางที่ กําลังรออยู่ที่ป้ายโดยสาร ก็จะต้องใช้เวลาในการรอค่อนข้างนานเช่นเดียวกัน หากมีจํานวนเที่ยวรถโดยสารที่ ให้บริการไม่เพียงพอ ก็จะต้องใช้เวลาในการรอที่นานขึ้น ในขณะที่ การเลือกใช้บริการ Ha:mo ในการเดินทาง โดยยอมจ่ายอัตราค่าบริการสูงกว่ารถโดยสารสาธารณะ หรือรถ ปอ.พ.ของจุฬาลงกรณ์มหาวิทยาลัย สามารถอํานวยความสะดวกได้มากกว่า รวมถึงยังส่งผลทำให้เพิ่มระยะการเดินทางส่วนบุคคลอีกด้วย นอกจากนี้ การศึกษานี้ได้สำรวจข้อมูล First-Last Mile Travel จากกลุ่มผู้ใช้บริการ Ha:mo ตั้งแต่ เดือนกันยายน – พฤศจิกายน พ.ศ. 2563 โดยใช้การสํารวจแบบ Stated Preference ผลการวิเคราะห์ข้อมูลจากกลุ่มตัวอย่างจํานวน 149 ตัวอย่าง พบว่า การใช้บริการ Ha:mo ส่งผลกระตุ้นการเดินเพื่อมาใช้บริการ Ha:mo ในปริมาณที่มากกว่าการเดินเพื่อไปใช้ระบบขนส่งสาธารณะ และบทบาทของการใช้บริการ Ha:mo ในพื้นที่การศึกษาต่อระบบขนส่งสาธารณะ มีหลากหลายขึ้นอยู่กับวัตถุประสงค์ในการเดินทาง ซึ่งการใช้บริการ Ha:mo สามารถทดแทนการใช้ ระบบขนส่งสาธารณะได้ 30%, เดินทางเพื่อเข้ามาในพื้นที่การศึกษา 24%, เดินทางออกจากพื้นที่การศึกษา 22%, …

A Brief Review On 3d Bioprinted Skin Substitutes, Fateme Fayyazbakhsh, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The global escalating cases of skin donor shortage for patients with severe wounds warn the vital need for alternatives to skin allografts. Over the last three decades, research in the skin regeneration area has addressed the unmet need for artificial skin substitutes. 3D bioprinting is a promising innovative technology to accurately fabricate skin constructs based on natural or synthetic bioinks, whether loaded or not loaded with native skin cells (i.e., keratinocytes and fibroblasts) or stem cells in the prescribed 3D hierarchal structure to create artificial multilayer and single cell-laden construct. In this paper, the recent developments in 3D bioprinting for …

Analysis Of Mechanical Deformation Eect On The Voltage Generation Of A Vertical Contact Mode Triboelectric Generator, Nabid Aunjum Hossain, Mir Jalil Razavi, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

One of the associated factors that controls the performance of a triboelectric generator (TEG) is the mechanical deformation of the dielectric layer. Therefore, a good contact model can be a prominent tool to find a more realistic and efficient way of determining the relationships between the contact and electrical output of the generator. In this study, experiments are conducted on a vertical contact mode triboelectric generator under an MTS machine. The open-circuit voltages are measured at different loads imposed by the MTS by controlling the cyclic displacement of the top tribo layer of the generator. A finite-element-based theoretical model is …

Reliability Estimation Of Rotary Lip Seal In Aircraft Utility System Based On Time-Varying Dependence Degradation Model And Its Experimental Validation, Chao Zhang, Rentong Chen, Guanghan Bai, Shaoping Wang, Mileta M. Tomovic

Engineering Technology Faculty Publications

With several attractive properties, rotary lip seals are widely used in aircraft utility system, and their reliability estimation has drawn more and more attention. This work proposes a reliability estimation approach based on time-varying dependence analysis. The dependence between the two performance indicators of rotary lip seals, namely leakage rate and friction torque, is modeled by time-varying copula function with polynomial to denote the time-varying parameters, and an efficient copula selection approach is utilized to select the optimal copula function. Parameter estimation is carried out based on a Bayesian method and the reliability during the whole lifetime is calculated based …

Mems Biosensor For Water-Immersed Application, Kun-Lin Lee

Dissertations and Theses

Although many air-based sensing mechanisms exist, not all of them can be applied in the water-based environment. In order to obtain a cell-based biosensor, the sensing method needs to be reliable and repeatable in a liquid environment. Therefore, this study is focused on transforming existing air-based sensors to water-immersed applications. This study includes two types of sensors.

First, commercial quartz resonators are used to investigate live-cell activity in water-based toxic solutions. I perform toxicity tests using quartz crystal microbalance (QCM). The QCM used in the study has a resonant frequency of 10 MHz and consists of an AT-cut quartz crystal …

A Micromechanics Study On Ferroelectrics And Multiferroic Composites, Zhiming Hu

Dissertations and Theses

Two kinds of modern composites are studied in this thesis. One is ferroelectric materials, and the other is the multiferroic composites. Based upon the essential properties of these two types materials, several issues need to be considered in order to study their effective properties. For example, the microstructures of the system including the shape, size and the distribution; the phase connectivity; and the loading conditions will impact the results. First, we focus on the investigation of ferroelectrics and its composites. Based on the experimental observations, the nonlinear electromechanical coupling responses of ferroelectrics are strongly depending on the frequency of the …

Adapting To Extreme Heat: Social, Atmospheric, And Infrastructure Impacts Of Air Conditioning In Megacities - The Case Of New York City, Harold Gamarro

Dissertations and Theses

Extreme heat events are becoming more frequent and intense in most large cities. Built-up surfaces also limit cooling mechanisms, leading to warmer conditions in cities, a phenomenon called the Urban Heat Island (UHI). This presents major challenges to reduce adverse health effects of hot weather, particularly in vulnerable populations like the elderly and low-income communities. Here we explore the overall impacts of increasing air conditioning (AC) system adoption in residences as an adaptive measure to reduce human health risks under heat waves, with New York City (NYC) as a case study. This study uses AC adoption data from the 2017 …

Capillary Forces And Wetting Dynamics By Diffuse-Interface Modeling, Fanny Thomas

Dissertations and Theses

Wetting phenomena underlie many natural and industrial processes, from the proper functioning of the lungs to the thin coating of surfaces. The three-phase interactions involved at microscopic scales play a critical role. Adding solid particles to an emulsion, for example, can drastically change the flow behavior due to capillary bridging between the particles. The study of these three-phase systems is especially relevant to the petroleum industry, where gas hydrates forming large clusters in subsea pipelines during crude oil transportation is a major concern. The dynamics of such systems is also of great interest from a fundamental perspective. Indeed describing non-equilibrium …

Toward Closing The Urban Surface Energy Balance Using Satellite Remote Sensing, Joshua Hrisko

Dissertations and Theses

The energy exchanges at the Earth’s surface are responsible for many of the processes that govern weather, climate, human health, and energy use. This exchange, commonly known as the surface energy balance (SEB), determines the near-surface thermodynamic state by partitioning the available energy into surface fluxes. The net all-wave radiation is often the primary energy source, while the heat storage and sensible and latent heat fluxes account for the majority of energy distributed elsewhere. While the SEB of various natural environments(trees, crops, soils) has been well-observed and modeled, the urban surface energy balance remains elusive. This is due to the …

On The Energy Sustainability Of Active And Passive Building Integrated Technologies In The Context Of A Changing Climate For Tropical Coastal Cities, Rabindra Pokhrel

Dissertations and Theses

Caribbean Sea surface temperatures have been rising at an alarming rate of 0.020C/year. The effect of rising sea surface temperatures is reflected in increasing in 2m air temperature over the Caribbean. The rise in extreme temperatures increases human discomfort and energy demands for air conditioning (AC) putting both the population and energy infrastructure at higher risk of vulnerability. This vulnerability is amplified in compact cities where anthropogenic heat removal from the built environment further increases the temperature of the urban canyon with feedback on human comfort and energy demands. Although there has been prior work reported on mitigating energy demands …

Examination Of The Adhesiveness Of The Nanotube Layer On Anodized Commercially Pure Titanium Samples Using The Micro-Limiting Dome Height Test And The Tensile Test., Joshua Manohar Chinthapalli

Graduate Research Theses & Dissertations

Titanium oxide (TiO2) nanotube is one of the most extensively studied nanotubes due to its wide applications in electronics and medical fields. In this study, we used electrochemical anodization to create nanotubes on commercially pure titanium (Cp-Ti) samples and examined the adhesiveness of the nanotube layer on the sample surface. Particularly we conducted micro-limiting dome height (µLDH) tests on anodized Cp-Ti foils of 38 µm thickness and 4 mm diameter at room temperature, 100℃, and 200℃. We also conducted tensile tests on standard tensile specimens of anodized Cp-Ti plate at room temperature, and 200℃. The Hitachi S-4500 Field Emission Scanning …

Surface Modification Of Titanium For Orthopedic And Drug Delivery Applications, Prantik Roy Chowdhury

Graduate Research Theses & Dissertations

Titanium is one of the most attractive metal used in orthopedic and drug delivery applications because of its excellent mechanical properties, biocompatibility and high corrosion resistance. However, due to its bio-inertness, fibrous tissue forms between the bone and implant which causes loosening of implant. Surface modification can play an important role to enhance interaction between implant and the surrounding tissues which reduces the implant failure. The aim of this study is to a) incorporate magnesium (Mg) into modified titanium surface by different deposition methods for bone-implant interaction, b) modify the surface of titanium by alkali treatment, and c) investigate the …