Mechanical Engineering Commons^™

Machine Learning Analysis To Characterize Phase Variations In Laser Propagation Through Deep Turbulence, Luis Fernando Rodriguez Sanchez

Open Access Theses & Dissertations

The present Dissertation is focused on the analysis of the atmospheric conditions of a turbulent environmental system and its effects on the diffraction of a laser beam that moves through it. The study is based on the optical communication of two labs placed at the summit of two mountains located in Maui, Hawaii. The emitter system is located at the Mauna Loa mountain and the receiver at the Haleakala. The distance between both mountains is 150 km. The emitter system is at a height of 3.1 km and the receiver at 3.4 km. The maritime environment at the location experiences …

Design Of A Linerless Cryogenic Propellant Tank For A Small Payload Launch Vehicle, Itzel Adriana Torres

Open Access Theses & Dissertations

The need of lightweight launch vehicles that will reduce the cost and make flights more frequent into orbit has called for an increase of composite materials in the aerospace industry. Composite material’s low thermal conductivity, high resistance to fatigue, and most importantly, low-weight can greatly reduce the cost of launch operations by decreasing the overall weight of the vehicle. Weight and cost savings are critical because any amount of weight that is saved can be directly applied as an additional amount of payload capability. The tanks on space vehicles are pressurized vessels that store fuel at cryogenic temperatures and have …

Synthesis And Advanced Manufacturing Of Polymer Structures And Their Composites, Bethany Rose Wilburn

Open Access Theses & Dissertations

The following research work performed embodies three unique studies of polymer structures and their composites. In general, polymers are viscoelastic, insulative materials that are used for a wide variety of applications within industrial, aerospace, and biomedical fields. Polymers have been studied and optimized for any particular use by chemically synthesizing unique micro-structures, altering the physical properties through fabrication and post-processing, and utilizing 3D printing to achieve complex geometries. In the past decade, additive manufacturing (AM) has drawn extensive attention across academia, industry, and government agencies. It offers unprecedented advantages such as design freedom, rapid prototyping, and customization. In this work, …

Additive Manufacturing Of Engineered Material Systems For Energy Applications, Luis Angel Chavez

Open Access Theses & Dissertations

Despite increasing efforts to use renewable electricity generation techniques in the last couple of decades, the world is still heavily reliant on traditional power generation techniques. This creates the need to make such systems cheaper and less pollutant through improvements to their efficiency. Increasing the efficiency and reliability of energy conversion systems, specially those based on combustion processes has been of interest for many years. However, material limitations have brought these systems to a stagnant condition.

A novel approach to help increase the efficiency of such systems is to closely monitor their operating conditions and therefore be able to increase …

A Probabilistic Creep Constitutive Model For Creep Deformation, Damage, And Rupture, Md Abir Hossain

Open Access Theses & Dissertations

The structural analysis of Industrial Gas Turbine (IGT), Aeroengine, Gen IV nuclear components under in-service conditions at various stress and temperature are susceptible to time-dependent creep deformation and creep induced failure. Such failure phenomena are exacerbated by the randomness in material properties, oscillating loading conditions, and other sources of uncertainty. The demand for physically based probabilistic creep modeling is highly sought by alloy designers. The objective of this study is to develop and validate a probabilistic creep-damage model incorporating multi-sources of uncertainty to replace the traditional deterministic and empirical decision-based modeling. In this study, the deterministic Sine-hyperbolic (Sinh) creep-damage model …

Brian Valdez - Dynamics And Control Of A 3-Dof Manipulator With Deep Learning Feedback, Brian Orlando Valdez

Open Access Theses & Dissertations

With the ever-increasing demands in the space domain and accessibility to low-cost small satellite platforms for educational and scientific projects, efforts are being made in various technology capacities including robotics and artificial intelligence in microgravity. The MIRO Center for Space Exploration and Technology Research (cSETR) prepares the development of their second nanosatellite to launch to space and it is with that opportunity that a 3-DOF robotic arm is in development to be one of the payloads in the nanosatellite. Analyses, hardware implementation, and testing demonstrate a potential positive outcome from including the payload in the nanosatellite and a deep learning …

Solar-Powered Exploration Of The Venus Atmosphere, Marc Migliozzi, Cory Everman, Rebecca Buerhle, Umar Muhammed, Steven Abbate, Chase Champagne

Williams Honors College, Honors Research Projects

The objective of this study was to design a solar powered, unmanned aircraft to orbit in the upper Venus atmosphere and search for signs of alien life. Topics of flight conditions, signs of life, basic mission plan, source of power, design process, instrumentation, and final designs are covered. Solar energy is ideal for this type of mission because it is the only reliable and abundant energy source accessible for long term space travel. The target altitude, being 60 to 70 km, has winds of up to 95 m/s. The aircraft will need to remain stable under such conditions. Due to …

A Foundational Approach To Extrusion And Compounding, David Frankart

Williams Honors College, Honors Research Projects

With a history of nearly 200 years, polymer processing and compounding is constantly changing to fit the material science needs of the era. Exposure of undergraduate students to the technology and practices used in industry today in a lab setting would create new opportunities for experiential learning and growth. The objective was to set up a 0.75”, 25 L/D Thermo Haake single screw extruder for lab use and run trials of material in a single screw extruder to set up a basis for experiments. Trials were run of co-polyester resin through a single screw extruder with carbon fiber additives varying …

Automated Runout Measurement Tool, Ethan Tisch

Williams Honors College, Honors Research Projects

A new measurement process and tool is to be developed to improve the existing method for measuring runout on the commutators of brushed DC product.

After an armature is manufactured, the commutator is inspected by placing the completed rotor assembly in one of several non-standard measurement fixtures. An indicator is then positioned on the commutator. A trained operator proceeds to rotate the armature while taking runout and bar-to-bar measurement at various positions along the length of the commutator.

This existing process is slow, costly, and unreliable. For these reasons, there is substantial economic pressure to develop a superior method for …

Designing A Recycling Facility For Energy Materials, Bartholomew Kitko, Matthew Berger, Elias Chiti, Trayce Harris, Mark Kulesa

Williams Honors College, Honors Research Projects

The purpose of this design project is to create a recycling facility for energy materials. Different energy systems will be analyzed to determine the most economically appropriate energy material to recycle. A list of the energy systems to be analyzed includes catalyst converters, wind turbines, lithium ion batteries, photo-voltaic cells, and precious materials with high energy applications. This study involves two main parts: the research to determine the most appropriate energy material for recycling, while also choosing or creating recycling processes efficient enough to reduce the US’s reliance on foreign nations for obtaining their rare-earth materials. The second part is …

Automatic Seeder, Zachary Bunting, Nicholas Muscarella, Trevor Tout, Dalton Denny

Williams Honors College, Honors Research Projects

Our Senior Design Project is the construction and implementation of an automatic seeder that is to be used in the agricultural industry. The automatic seeder is being designed to eliminate prevalent issues within the process of planting seeds by hand, such as labor requirements and inconsistent operations. The seeder is meant to reduce time spent on planting seeds and place them in an efficient manner for optimal growth conditions.

This project will require several specific research questions to be addressed in the form of application and good usability. We will investigate the method of planting the seed, the conveyor track …

Leveling-Position Platform Cart, Brice Hutchison

Williams Honors College, Honors Research Projects

For this project, Schaeffler reached out to students at the University of Akron to design an ergonomic pushcart for their operators. Operators at the plant must bend down to pick up or place torque converter components on and off the current carts. To solve this design issue, compression springs and tension springs were researched. The research found that compression springs were the more feasible design. After the design approach was selected, calculations were made, so spring parameters could be selected. The calculations found the proper spring design to use, and they conveyed the possible buckling of the springs if they …

Zips Electric Racing Suspension Design, Christopher Thompson, Madison Hughes, Erikah Jackson, Anna Signorino

Williams Honors College, Honors Research Projects

As a member of the 2020 Zips Electric Racing Design Team, I will design the suspension subsystem with three other members. Specifically concentrating on the steering and suspension mounting points, we will optimize and improve some components from the previous year's design. Modeling of components will be done in Solidworks and suspension vehicle behavior will be modeled in MATLAB and Optimum Kinematics.

Quickcut Cnc Waterjet Cutter, Kelly V. Robbins

Williams Honors College, Honors Research Projects

This design project was dedicated to improving the existing design and making functional the QuickCut CNC Waterjet Cutter. The scope of work consisted of making the machine mobile and more structurally stable as well as programming the CNC controls. The project was started in the 2018/19 school year by a former mechanical engineering student. The subsystems consist of the frame, power, motor, water pump and associated plumbing, nozzle, abrasive feed system, x/y gantry, Arduino control system and the cutting bed. Unfortunately, due to the COVID-19 pandemic, the full scope was not able to be completed in its entirety.

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Autonomous Guided Vehicle Frame For Outdoor Use, Thomas Mcgrath

Williams Honors College, Honors Research Projects

The overall goal for my project is to design a durable Autonomous Guided Vehicle (AGV) frame intended for carrying a heavy load over outdoor terrain. I will not be designing a complete vehicle, only the basic structure that can be used to build a complete AGV on. There will be complete 3D models of the design and its individual parts. I also would like to provide limited Finite Element Analysis of the design using ANSYS software to determine weaknesses and methods for improvement. The design I create is meant to be used as a framework for complete outdoor AGV designs. …

Rinse Tank Salinity Automation, George Pahoundis

Williams Honors College, Honors Research Projects

Manufacturing processes are often consisted of many different processes and sub-processes. Each of these carries its own level of importance and impact to the overall picture. In this particular sub-process, salt is rinsed from a product via a rinse tank: a tank whose salinity may not exceed a certain level and whose temperature must not fall below a certain level. This setting is a prime opportunity to implement an automated control system to allow these parameters to be met with upmost efficiency. With potential savings in excess of $20,000 per year and an estimated payback period of 8 weeks, the …

Enhancement Of The Syncardia Total Artificial Heart For Pediatric Use, Margaret Clark, Madison Marks

Williams Honors College, Honors Research Projects

Pediatric patients with disorders and diseases of the heart have limited options with regards to implantable devices. Many of these implants are ventricular assist devices, which is not always suitable for a patient. Total artificial hearts (TAHs) have supported many adult patients until transplantation, and we believe that they could do the same for pediatric patients. SynCardia has the only Food and Drug Administration (FDA) approved TAH devices. Since SynCardia is the only company with FDA approved TAHs, we decided to modify the design of the SynCardia TAH for use in pediatric patients without compromising the function of the current …

Quantification And Modeling Of Bladder Biomechanics Mechanisms Linking Spontaneous Rhythmic Contractions And Dynamic Elasticity To Detrusor Overactivity, Zachary E. Cullingsworth

Theses and Dissertations

Overactive bladder (OAB) is a chronic condition affecting approximately 20% of adults in the United States. Detrusor overactivity (DO) is the presence of non-voiding contractions in the detrusor (bladder) muscle during filling and is present in some individuals with OAB. DO is currently identified visually during a urodynamics (UD) study involving pressure catheters and filling and voiding of the bladder to evaluate function. UD provides limited subtyping of DO, and an incomplete understanding of mechanisms contributing to OAB.

Aim 1 of this study was to develop objective tools to quantify, subgroup and better understand …

Defect Modeling And Vibration-Based Bending Fatigue Of Additively Manufactured Inconel 718, Wesley Earl Eldt

Browse all Theses and Dissertations

Additive manufacturing (AM) is convenient for building components with complex features. However, the long-term integrity of these components is uncertain, since AM parts have defects such as pores and rough surfaces. In this work, an analytical model was developed to determine the impact of defects, and a novel bending fatigue test was used to determine the fatigue life of channeled specimens. The analytical model, based off the theory of critical distances, investigates coupled pores and predicts their potential for fatigue failure. This resulted in a maximum allowable pore size and spacing recommendation for coupled defects. Additionally, specimens with through channels …

Adaptive Multi-Fidelity Modeling For Efficient Design Exploration Under Uncertainty, Atticus J. Beachy

Browse all Theses and Dissertations

This thesis work introduces a novel multi-fidelity modeling framework, which is designed to address the practical challenges encountered in Aerospace vehicle design when 1) multiple low-fidelity models exist, 2) each low-fidelity model may only be correlated with the high-fidelity model in part of the design domain, and 3) models may contain noise or uncertainty. The proposed approach approximates a high-fidelity model by consolidating multiple low-fidelity models using the localized Galerkin formulation. Also, two adaptive sampling methods are developed to efficiently construct an accurate model. The first acquisition formulation, expected effectiveness, searches for the global optimum and is useful for modeling …

Correlating In-Situ Monitoring Data With Internal Defects In Laser Powder Bed Fusion Additive Manufacturing, Andrew J. Harvey

Browse all Theses and Dissertations

The presence of defects within laser powder bed fusion (LPBF) parts can lead to reduced mechanical properties and life of components. Because of this, the ability to detect these defects within the parts is critical before the part is subject to its intended loading. Normally the parts are subjected to a quality analysis once they are completed however, this process is typically expensive and time consuming. A solution for these problems is to sense the creation of defects and pores in the parts in-situ, while the part is being fabricated. One proposed method of in-situ monitoring is visible spectroscopy to …

Turbine Passage Vortex Response To Upstream Periodic Disturbances, Mitchell Lee Scott

Browse all Theses and Dissertations

Flow through the turbine section of gas turbine engines is inherently unsteady due to a variety of factors, such as the relative motion of rotors and stators. In low pressure turbines, periodic wake passing has been shown to impact boundary layer separation, blade surface pressure distribution, and loss generation. The effect of periodic disturbances on the endwall flow is less understood. Endwall flow in a low-pressure turbine occurs in the boundary layer region of the flow through the blade passage where the blade attaches to the hub in the turbine. The response of an endwall vortical structure, the passage vortex, …

Identification Of Heat Release Shapes And Combustion Control Of An Ltc Engine, Radhika Sitaraman

Dissertations, Master's Theses and Master's Reports

Low Temperature Combustion (LTC) regimes have gained attention in internal combustion engines since they deliver low nitrogen oxides (NOx) and soot emissions with higher thermal efficiency and better combustion efficiency, compared to conventional combustion regimes. However, the operating region of these high-efficiency combustion regimes is limited as it is prone to knocking and high in-cylinder pressure rise rate outside the engine safe zone. By allowing multi-regime operation, high-efficiency region of the engine is extended. To control these complex engines, understanding and identification of heat release rate shapes is essential. Experimental data collected from a 2 liter 4 cylinder LTC engine …

Efficient Enhancement Of Micro-Nucleation Rates In Flow-Boiling - By Concurrent Micro-Structuring Of The Boiling-Surface And Its Judicious Energization By Piezoelectric-Transducer Induced Acoustic Vibrations., Atharva Rahane

Dissertations, Master's Theses and Master's Reports

The report describes the science and technology backgrounds and uses for the technology breakthrough reported for enhanced flow-boiling based cooling of high-power density electronics (chips, memory etc.). A controlled but explosive growth in micro-scale nucleation rates during flow-boiling of HFE-7100 (electronics and environment friendly liquid from 3M, Inc) is enabled by the uses of inexpensive meshed-copper for micro-structuring of the boiling surface and a pair of Piezoelectric-transducers for active imposition of suitable acoustic vibrations. The pair of piezo transducers mounted just outside the mini-channel impose “in plane” acoustic vibrations of controllable amplitudes and frequencies, and they are used to induce …

Sensor Fusion And Non-Linear Mpc Controller Development Studies For Intelligent Autonomous Vehicular Systems, Ahammad Basha Dudekula

Dissertations, Master's Theses and Master's Reports

The demand for safety and fuel efficiency on ground vehicles and advancement in embedded systems created the opportunity to develop Autonomous controller. The present thesis work is three fold and it encompasses all elements that are required to prototype the autonomous intelligent system including simulation, state handling and real time implementation. The Autonomous vehicle operation is mainly dependent upon accurate state estimation and thus a major concern of implementing the autonomous navigation is obtaining robust and accurate data from sensors. This is especially true, in case of Inertial Measurement Unit (IMU) sensor data. The IMU consists of a 3-axis gyro, …

Bibliometric Analysis Of Bearing Fault Detection Using Artificial Intelligence, Pooja Kamat, Rekha Sugandhi Dr.

Library Philosophy and Practice (e-journal)

The new industrial revolution called Industry 4.0 is proliferating at its peak. The time is no longer away when the human race is going to witness a huge paradigm shift. Intelligent machines empowered by Artificial Intelligence (AI)will take over the presence of human workers in the industrial manufacturing sector with the target of achieving 100% automation. With the emergence of cut-throat price competition in the product market, it has become equally important to manufacture goods at minimal costs and with the highest quality. Predicting the decrease in machinery efficiency at an earlier stage to accomplish this objective helps to reduce …

Nanothermomechanical And And Or Logic Gates, Ahmed Hamed, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

Today’s electronics cannot perform in harsh environments (e.g., elevated temperatures and ionizing radiation environments) found in many engineering applications. Based on the coupling between near-field thermal radiation and MEMS thermal actuation, we presented the design and modeling of NanoThermoMechanical AND, OR, and NOT logic gates as an alternative, and showed their ability to be combined into a full thermal adder to perform complex operations. in this work, we introduce the fabrication and characterization of the first ever documented Thermal AND and OR logic gates. Theresults show thermal logic operations can be achieved successfully through demonstrated and easy-to- manufacture nanothermoMechanical logic …

Electrospun Thymosin Beta-4 Loaded Plga/Pla Nanofiber/ Microfiber Hybrid Yarns For Tendon Tissue Engineering Application, Shaohua Wu, Rong Zhou, Fang Zhou, Philipp N. Streubel, Shaojuan Chen, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

Microfiber yarns (MY) have been widely employed to construct tendon tissue grafts. However, suboptimal ultrastructure and inappropriate environments for cell interactions limit their clinical application. Herein, we designed a modified electrospinning device to coat poly(lactic-co-glycolic acid) PLGA nanofibers onto polylactic acid (PLA) MY to generate PLGA/PLA hybrid yarns (HY), which had a well-aligned nanofibrous structure, resembling the ultrastructure of native tendon tissues and showed enhanced failure load compared to PLA MY. PLGA/PLA HY significantly improved the growth, proliferation, and tendon-specific gene expressions of human adipose derived mesenchymal stem cells (HADMSC) compared to PLA MY. Moreover, thymosin beta-4 (Tβ4) loaded PLGA/PLA …

Additive Manufacturing Of Magnesium Alloys, Rakeshkumar Karunakaran, Sam Ortgies, Ali Tamayol, Florin Bobaru, Michael P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Magnesium alloys are a promising new class of degradable biomaterials that have a similar stiffness to bone, which minimizes the harmful effects of stress shielding. Use of biodegradable magnesium implants eliminates the need for a second surgery for repair or removal. There is a growing interest to capitalize on additive manufacturing's unique design capabilities to advance the frontiers of medicine. However, magnesium alloys are difficult to 3D print due to the high chemical reactivity that poses a combustion risk. Furthermore, the low vaporization temperature of magnesium and common biocompatible alloying elements further increases the difficulty to print fully dense structures …