Mechanical Engineering Commons^™

Compaction And Residual Stress Modeling In Composite Manufactured With Automated Fiber Placement, Von Clyde Jamora

Mechanical & Aerospace Engineering Theses & Dissertations

Automated fiber placement is a state-of-the-art manufacturing process that allows for complex layup patterns and can quickly place, cut, and restart composite tows. However, with this type of manufacturing process layup defects are inevitable, and manufacturing defects propagate after curing. Process modeling is the considered approach for exploring the defect prediction. Two different but related works were conducted, which are the thermochemical and hyperelastic model and the residual deformation model. For the model before cooling, a hyperelastic model and a thermo-chemical were made to simulate the compaction and heat transfer. Temperature dependent properties that are a function of degree of …

Thermal Contact Resistance Measurement And Related Uncertainties, Amanda Elizabeth Stark

Mechanical & Aerospace Engineering Theses & Dissertations

Thermal contact resistance is an important parameter in detailed thermal analysis and design of aerospace systems. The ability to determine thermal contact resistance reliably can have a significant impact on the fidelity of thermal models—particularly for space applications. The 2004 NASA Langley Research Center thermal contact resistance test apparatus has been employed to evaluate two methods for inferring estimated interface surface temperatures so that thermal contact resistance can be calculated more accurately. The traditional method of extrapolation is a steady-state approach, while the new method utilizes inverse heat transfer techniques to account for inherent unsteadiness in these quasi-steady-state measurements. The …

Role Of Anisometric Particles In Ice-Templated Porous Ceramic Structure And Mechanical Properties, Mahesh Banda

Mechanical & Aerospace Engineering Theses & Dissertations

Open-cell macroporous ceramics have a significant impact on advancing various engineering endeavors such as bone-tissue engineering, lithium-ion batteries, filtration, thermal insulation, impact protection, etc. While pore orientation in conventional open-cell foams is random, in recent years, significant interest has grown in utilizing directionally porous ceramics in these applications to enhance performance. Ice-templating has emerged as a versatile technique that can synthesize directionally macroporous ceramics with low pore tortuosity. Although the fabrication is relatively straightforward, the challenge is that there are numerous variables associated with this technique, which can have significant effects on the final structure and macroscopic properties. As a …

A Study Of The Aeroacoustics Of Swept Propellers For Small Unmanned Aerial Vehicles, Arthur David Wiedemann

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, small unmanned aerial vehicles (UAVs) have increased in availability and use in both public and commercial sectors. This increased use of small UAVs or “drones” has the unfortunate consequence of introducing excessive noise into communities where they operate. Implementation of noise reduction methods is necessary if we wish to see expanded use of drones in public areas. With electric propulsion, the primary source of noise is the rotor/propeller used in contemporary multi-rotor configurations. In this thesis, the aerodynamics and acoustic behavior of various swept propellers is examined with computational and experimental methods.

A family of propeller geometries …

Through-Thickness Reinforcement And Repair Of Carbon Fiber Based Honeycomb Structures Under Flexure And Tension Of Adhesively Bonded Joints, Aleric Alden Sanders

Mechanical & Aerospace Engineering Theses & Dissertations

Repair and reinforcement of composite honeycomb structures is an area of concern as higher demands are being placed on high strength, lightweight structural materials, such as carbon fiber reinforced plastics and corresponding honeycomb structures. A common issue with these structures is when a delamination in the facesheet may form and spread, leading to a failure scenario. An investigation of adding a through thickness reinforcement (TTR) to these structures at the sample level that undergo four-point-bending, tension, and joining methods is conducted throughout this thesis. The embedding of pultruded carbon fiber rods is found to be an ideal addition to composite …

Tow-Path Characterization For Automated Fiber Placement, Roudy Wehbe

Theses and Dissertations

Automated Fiber Placement (AFP) is a manufacturing process used to fabricate large composite structures for aerospace applications. During the process, the machine head deposits multiple bands of composite material named tows over a prescribed path. Temperature, speed, and compaction pressure can be varied to obtain a good layup quality. For conventional laminated plate structures manufactured using the AFP process, fibers are laid at constant angles (0°, 90°, ±45°) in straight paths. However, to manufacture complex shell structures or variable stiffness plates, curved paths are necessary in the design leading to a length mismatch between the parallel edges of the towpath. …

Design And Testing Of A Supercritical Carbon Dioxide Plasma Reactor, Gregory Belk

Theses and Dissertations

The objective of this project was to design, build, and test a plasma reactor capable of operating in the supercritical conditions. The reactor allows for the initiation of a plasma discharge in different fluids driven by a direct current (DC) power supply operating either in steady state mode or pulsing mode. The reactor was specifically designed for igniting plasmas within supercritical carbon dioxide, which has a pressure of 72.9 atm and 31.1 degrees Celsius.

A series of runs were conducted for varying pressures and inter-electrode separation, which allowed testing the operation regimes of the reactors. Finally, plasma experiments were conducted …

Kinetic And Multidimensional Transport Coupled Numerical Investigation Of Nox Formation During Syngas And Natural Gas Combustion, Sheikh Farhan Ahmed

Theses and Dissertations

The primary objective of this thesis work is focused on the chemical kinetic modeling of the formation of Oxides of Nitrogen (collectively termed as NOx), regarded as a major pollutant emitted by combustion devices, and the application of that model to simulate transport coupled multidimensional distribution of NOx in a reacting flow. The underlying motivation of this kinetic modeling is the noted discrepancies among the existing models, which become critical in selecting the correct model in advanced gas turbine and engine research. The first part of this work is the performance evaluation and comparison of the existing models. Based on …

Efficient Design Optimization Methodology For Manufacturable Variable Stiffness Laminated Composite Structures, Mazen Albazzan

Theses and Dissertations

Because of their superior mechanical and environmental properties compared to traditional metals, fiber-reinforced composite materials have earned a widespread acceptance for different structural applications. The tailoring potential of composites to achieve high specific stiffness and strength has promoted them as promising candidates for constructing lightweight structures. From that aspect, designers have tackled the problem of designing composite laminates, which is inherently challenging due to the presence of non-linear, non-convex, and multi-dimensional optimization problems with discrete and continuous design variables. However, despite their increased usage, the possible improvements that can be achieved by composite laminates have not been fully exploited. With …

Influence Of Dynamic Multiaxial Transverse Loading On Ultrahigh Molecular Weight Polyethylene Single Fiber Failure, Frank David Thomas

Theses and Dissertations

High performance fibers such as ultrahigh molecular weight polyethylene (UHMWPE) are often used for ballistic impact applications in the form of textile fabrics and composite laminates. In order to predict the ballistic performance of such materials, single-fiber experiments are performed to quantify the material behavior at smaller length scales, which can be applied to larger length scales as a result. Failure of UHMWPE is well understood as a function of simple tension at low and high strain rates, as well as under various multiaxial loading states. However, experimental characterization of single UHMWPE fibers under transverse loading at high strain rates …

Design Of Bio-Inspired Multifrequency Acoustic Sensors And Metamaterial Energy Harvesting Smart Structures, Mohammadsadegh Saadatzi

Theses and Dissertations

Due to the limited availability and high depletion rates of nonrenewable sources of energy as well as environmental concerns, the scientific community has started to explore many alternative clean sources of energies. It is identified that civil, mechanical and Aerospace structures are always subjected to acoustic noises and vibration which could potentially be used as renewable source of energy. Roads and Industrial noise barriers are used inside industrial facilities alongside the walls, around construction pillars, nearby machinery and other equipment to separate quite work zones, protect walls, deliver extra safety and precautions while diminish sound and vibrational pressure. We hypothesized …

Evaporation Rate From Free Water Surface, Safa M. Aldarabseh

Dissertations

This work aims to perform an experiment in the laboratory and investigate the effect of the wave steepness, airflow velocity, air relative humidity, air temperature, and water surface temperature on the evaporation rate from still and wavy water surface. In this investigation, the experimental results are used to quantify an evaporation rate from a still and wavy water surface under different convection regimes that are free, mixed, and forced convection under turbulent airflow conditions. Empirical correlations are also derived using the experimental results based on modified Dalton’s law and Similarity method (analogy between mass and heat transfer equation). In this …

Turbulization Method Of Formation Of Highly Dispersed Droplets, Kh.D. Irisov, I.A. Ashirbekov, A.P. Kartoshkin, A.D. Abdazimov

Technical science and innovation

The article critically analyzes traditional methods of forming drops of defoliants and liquid chemicals. As an object of study, a sprayer with a perforated turbulator was selected, which ensures the formation of fine droplets on a short spraying torch. The degree of crushing of the working fluid, design parameters and operating modes of the proposed sprayer are investigated. Based on theoretical studies, analytical dependencies that reveal the physical properties of the sprayed liquid are analyzed, a description of the device and the principle of operation of the sprayer equipped with a perforated turbulator is given. The above analytical dependencies allowed …

Reinforcing The Strength Of Gear Shaft Teeth With High Performance, N. Turakhodjaev, Sh. Chorshanbiev, N. Sadikova, J. Egamshukurov

Technical science and innovation

This article presents the results of the research on the development of the technology of increasing the service life of the sheets in the working conditions of the casting at the Central Repairs and Mechanical Plant at the Almalyk Mining and Metallurgy Refinery (CPC). One of the factors that led to the loss of Val schisternia was the study of the appearance, rupture and dental breakdown of the working surfaces, which led to increased production costs. Analyzes have shown that thermal processing and so-called thermal processing are recommended to increase the working capacity of the plants and factories at the …

Improving The Performance Indicators Of Diesel Engines By Enhancing The Cooling System, O.O. Daminov, O.A. Khushnaev, A.I. Yangibaev, G.M. Kucharenok

Technical science and innovation

The article deals with the improvement of the performance of diesel engines by improving the cooling system. It is indicated that there is a number of problems that arise when converting an engine with spark ignition to natural gas. The increase of thermal stress of the engine is illustrated. As a result of researching of features of the parameters and characteristics of a gas-powered automobile engine and optimization of its temperature regime, a very actual scientific and practical task is determined. The engine with the spark ignition installed on the microbus working on the diesel and gas is presented. The …

Effect Of Chromium Trioxide Coating On The Thermal Performance Of Solar Thermal Collector, Èkram Hadi Alaskaree, Osamah Raad Skheel Alkhafaji, Nizar F. O. Al-Muhsen

Karbala International Journal of Modern Science

This paper compared the thermal performance of two solar collectors. The first collector is coated by a dark black absorbent solar collector, and the second one coated by the chromium trioxide. The results of the second collector show a better selectivity in terms of greater radiation absorption, and less emission compared to the first collector. At the minimum solar irradiance time, the absorbed energy is increased from 908.28J to 1221.5J, and the thermal efficiency is improved from 37.3% to 50.1% when the chromium trioxide coating is used. Besides, at the maximum solar irradiance time, the absorbed energy is increased from …

Biodiesel Production From Chicken Feather Meal And Its Performance Analysis On Diesel Engine, Venkateswarulu Tc, Indira Mikkili, Krupanidhi Srirama, Nazneen Bobby Md., John Babu Dulla, Venkata Narayana Alugunulla, Vivekananda S, Abraham Peele, Bangaraiah P

Karbala International Journal of Modern Science

Biodiesel has intrinsic lubricating properties due to the presence of long chain fatty acids, which significantly help to reduce engine wear and tear. Poultry waste as an alternative energy source could aid in reducing greenhouse gases. Biodiesel acknowledges environmental issues as it is less toxic than diesel and is biodegradable too. It is much safer to handle due to its high flash point and consequently, air quality improves dramatically. From the energy point of view, as a renewable source of energy, it helps in energy conservation and ensures regular availability for production of fuel. The chicken feather meal with moderate …

Characterization Of Reactive Ion Etch Chemistries Using Direct Write Lithography, Dylan T. Martin-Abood

Theses and Dissertations

The DoD requires a variety of COTS and number of custom microelectronics to provide important functionality to critical military systems. Photolithography and DRIE are two techniques commonly used in the development of deep anisotropic features for the fabrication and modification of microelectronics and MEMS. However, standard photolithography techniques are ineffective for unique substrate geometries and DRIE processes require a chemical passivation step only applicable to Si substrates. This work confirmed the capability of RIE using DWL to perform deep, highly selective, anisotropic etching on elevated, non-circular substrates.

A Wirelessly Controlled Smart Bandage With 3d-Printed Miniaturized Needle Arrays, Hossein Derakhshandeh, Fariba Aghabaglou, Alec Mccarthy, Azadeh Mostafavi, Chris Wiseman, Zack Bonick, Ian Ghanavati, Seth Harris, Craig Kreikemeier-Bower, Seyed Masoud Moosavi Basri, Jordan Rosenbohm, Ruiguo Yang, Pooria Mostafalu, Dennis Orgill, Ali Tamayol

Department of Mechanical and Materials Engineering: Faculty Publications

PUBLIC ACCESS

Results Of Improvement Of The Technological Process Of Sorting Of Draged Seeds, R.K. Djamolov, E.T. Maksudov, K. Djamolov

Irrigation and Melioration

The article presents the results of experiments conducted to justify the parameters of the seed selection unit to improve the process of sorting seeds. The experiments were carried out by changing the angle of inclination of the seed tray to the horizontal plane from α = 390 to α = 540 and the radius of the lower part of the tray in the aisle R = 140-180 mm. The experimental results show that the bottom of the tray, made in the form of a semicircle, allows the seeds to move up the pipe when the seeds fall from the tray …

Novel Methods For Composites Recycling Via Pyrolysis, Matt Jacobs

Undergraduate Honors Theses

Composites are unique materials in many respects. When fabric woven from carbon fibers is joined with a thermoset resin in a controlled environment, it results in a very strong material, especially evaluated on a pound-for-pound basis against metals and ceramics. One aspect of this construction that provides great strength lies in the fiber-matrix adhesion which facilitates load transfer to the reinforcement of the composite. This fiber-matrix adhesion is promoted by the polarity of the usual thermoset matrices, and properly designed sizing materials coating the fibers. It’s a two-edged sword, though. Although the resin and the fibers are quite strong together, …

Characterization Of Nanorod Lmo Li-Ion Battery Performance And Microstructure Degradation, Austin Gabhart, Hernando Gonzalez Malabet

Research Horizons Day Posters

No abstract provided.

Design Of An Affordable Rotating Drum Electrospinner For Classroom Education, Peder Solberg

The Journal of Undergraduate Research

Electrospinning is a technology used to generate small fibers down to nano-scale size. This method of fiber creation has been around for many years. However, in recent years electrospinning has found increased applications, especially in the area of tissue engineering due to its ability to create fibers with properties similar to the extracellular matrix in tissue. An electrospinning platform can illustrate concepts of engineering, electro-mechanical system design, manufacturing, and biomedical applications in one single package. Hence, it provides an excellent opportunity to integrate into secondary (middle and high school) and post-secondary (undergraduate) technology education.

Furthermore, just as integration of 3D …

Proper Orthogonal Decomposition And Recurrence Map For The Identification Of Spatial–Temporal Patterns In A Low-Re Wake Downstream Of Two Cylinders, Meihua Zhang, Zhongquan Charlie Zheng, Huixuan Wu

Mechanical and Aerospace Engineering Faculty Publications

Flow decomposition methods provide systematic ways to extract the flow modes, which can be regarded as the spatial distribution of a coherent structure. They have been successfully used in the study of wake, boundary layer, and mixing. However, real flow structures also possess complex temporal patterns that can hardly be captured using the spatial modes obtained in the decomposition. In order to analyze the temporal variation of coherent structures in a complex flow field, this paper studies the recurrence in phase space to identify the pattern and classify the evolution of the flow modes. The recurrence pattern depends on the …

Review Of Living Learning Communities And Their Impact On First Year Engineering College Students, Samantha Schauer, Krishna Pakala, Kim M.B. Tucker

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Traditionally, first-year college students do not have a community of like-minded peers with whom they are able to learn. Adding to first-year engineering college students’ (FYECS) struggles is the fact that many students do not have a mentor in their related field and are unable to start building their professional repertoire, network, and/or practical skills. Living Learning Communities (LLC) can offer a platform for postsecondary institutions to increase recruitment, engagement, and sense of belonging for students who live in an LLC. LLCs have been described in the literature as themed living and learning communities where students take a common course(s), …

Comprehensive Second-Order Adjoint Sensitivity Analysis Methodology (2nd-Asam) Applied To A Subcritical Experimental Reactor Physics Benchmark: Iv. Effects Of Imprecisely Known Source Parameters, Ruixian Fang, Dan Gabriel Cacuci

Faculty Publications

By applying the Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the polyethylene-reflected plutonium (PERP) benchmark, this work presents results for the first- and second-order sensitivities of this benchmark’s leakage response with respect to the spontaneous fission source parameters. The numerical results obtained for these sensitivities indicate that the 1st-order relative sensitivity of the leakage response to the source parameters for the two fissionable isotopes in the benchmark are all positive, signifying that an increase in the source parameters will cause an increase in the total neutron leakage from the PERP sphere. The 1st- and 2nd-order relative sensitivities with respect to …

Investigation Study Of A Novel Oscillating Thermo-Magneto-Electric Generator, Abdulrahman Mohammed Homadi

Theses and Dissertations

In this dissertation, we present a unique system working as a generator that takes the advantage of waste heat dissipation from an application to generate electricity by induction. This system can be called a thermo-magneto-electric generator (TMEG), because it deals with a heat source, heat sink, and magnetic field generated by a permanent magnet (PM) and works to generate voltage by induction. The magnetic energy is the resource power of this system due to the existence of the magnetic material (ferromagnetic), and the reason of the movement is the change in the amount of magnetic energy repeated by the change …

Porous Silica Nanotube Thin Films As Thermally Insulating Barrier Coatings, Derric B. Syme, Jason M. Lund, Brian D. Jensen, Robert C. Davis, Richard R. Vanfleet, Brian D. Iverson

Faculty Publications

The fabrication and examination of a porous silica thin film, potentially for use as an insulating thin film, were investigated. A vertically aligned carbon nanotube (CNT) forest, created by chemical vapor deposition (CVD), was used as scaffolding to construct the porous film. Silicon was deposited on the CNT forest using low-pressure CVD (LPCVD) and then oxidized to remove the CNTs and convert the silicon to silica for electrical or thermal passivation (e.g., thermal barrier). Thermal conductivity was determined using a 1D heat-transfer analysis that equated radiative heat loss in a vacuum with conduction through the substrate and thin film stack. …

Examining Career And Technical Education Practitioner Preparation And Professional Development Needs, Shane Wilson Lange

Theses and Dissertations

This quantitative study was used to investigate Illinois automotive educator professional development needs and to identify the demographic landscape of Illinois secondary and post-secondary automotive teachers. The study should bring a greater understanding of what automotive teachers feel they need to learn in order to continue as successful educators. A modified Borich (1980) needs assessment model was used to identify the perceived importance and ability levels for 32 professional competencies. Mean Weighted Discrepancy Scores (MWDS) were calculated using the importance and ability scores in order to report the professional development need. The administered survey was also utilized to examine their …

The Use Of Succinonitrile As An Electrolyte Additive For Composite-Fiber Membranes In Lithium-Ion Batteries, Jahaziel Villarreal, Roberto Orrostieta Chavez, Sujay A. Chopade, Timothy P. Lodge, Mataz Alcoutlabi

Mechanical Engineering Faculty Publications

In the present work, the effect of temperature and additives on the ionic conductivity of mixed organic/ionic liquid electrolytes (MOILEs) was investigated by conducting galvanostatic charge/discharge and ionic conductivity experiments. The mixed electrolyte is based on the ionic liquid (IL) (EMI/TFSI/LiTFSI) and organic solvents EC/DMC (1:1 v/v). The effect of electrolyte type on the electrochemical performance of a LiCoO₂ cathode and a SnO₂/C composite anode in lithium anode (or cathode) half-cells was also investigated. The results demonstrated that the addition of 5 wt.% succinonitrile (SN) resulted in enhanced ionic conductivity of a 60% EMI-TFSI 40% EC/DMC MOILE …