Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 7951 - 7980 of 30020

Full-Text Articles in Mechanical Engineering

Nondestructive Evaluation Of Aluminium Foam Panels Subjected To Impact Loading, Gabriella Epasto, Fabio Distefano, Hozhabar Mozafari, Emanoil Linul, Vincenzo Crupi Jan 2021

Nondestructive Evaluation Of Aluminium Foam Panels Subjected To Impact Loading, Gabriella Epasto, Fabio Distefano, Hozhabar Mozafari, Emanoil Linul, Vincenzo Crupi

Department of Mechanical and Materials Engineering: Faculty Publications

Aluminium foam sandwich structures have excellent energy absorption capacity, combined with good mechanical properties and low density. Some of the authors of this paper proposed an innovative Metallic Foam Shell protective device against flying ballast impact damage in railway axles. A closed-cell aluminium foam was chosen for the Metallic Foam Shell device. The main goal of this study was the experimental investigation of the impact responses of aluminium foam panels. Low velocity impact tests were carried out at different energies on different types of aluminium foam panels in order to investigate the effects of some parameters, such as core thickness, …

Go to article

Surface Strengthening Of Single-Crystal Alumina By High-Temperature Laser Shock Peening, Fei Wang, X. L. Yan, Lei Liu, Michael Nastasi, Yongfeng Lu, Bai Cui Jan 2021

Surface Strengthening Of Single-Crystal Alumina By High-Temperature Laser Shock Peening, Fei Wang, X. L. Yan, Lei Liu, Michael Nastasi, Yongfeng Lu, Bai Cui

Department of Mechanical and Materials Engineering: Faculty Publications

This manuscript reports a novel process of high-temperature laser shock peening (HTLSP) for surface strengthening of single-crystal ceramics such as sapphire and reveals its fundamental mechanisms. HTLSP at 1200°C can induce a high compressive residual stress on the surface of sapphire while minimize the damage of laser-driven shock waves. Transmission electron microscopy characteriza- tions revealed high dislocation densities near the surface, suggesting that plastic deformation at an ultrahigh strain rate was generated by the high shock wave pressure. The HTLSP-induced compres- sive residual stress can significantly improve the hardness and fracture toughness of sapphire, while maintain its outstanding optical transmittance.

Go to article

The Role Of Microenvironmental Cues And Mechanical Loading Milieus In Breast Cancer Cell Progression And Metastasis, Brandon D. Riehl, Eunju Kim, Tasneem Bouzid, Jung Yul Lim Jan 2021

The Role Of Microenvironmental Cues And Mechanical Loading Milieus In Breast Cancer Cell Progression And Metastasis, Brandon D. Riehl, Eunju Kim, Tasneem Bouzid, Jung Yul Lim

Department of Mechanical and Materials Engineering: Faculty Publications

Cancer can disrupt the microenvironments and mechanical homeostatic actions in multiple scales from large tissue modification to altered cellular signaling pathway in mechanotransduction. In this review, we highlight recent progresses in breast cancer cell mechanobiology focusing on cell-microenvironment interaction and mechanical loading regulation of cells. First, the effects of microenvironmental cues on breast cancer cell progression and metastasis will be reviewed with respect to substrate stiffness, chemical/topographic substrate patterning, and 2D vs. 3D cultures. Then, the role of mechanical loading situations such as tensile stretch, compression, and flow-induced shear will be discussed in relation to breast cancer cell mechanobiology and …

Go to article

Ligand Assisted Growth Of Perovskite Single Crystals With Low Defect Density, Ye Liu, Xiaopeng Zheng, Yanjun Fang, Ying Zhou, Zhenyi Ni, Xun Xiao, Shangshang Chen, Jinsong Huang Jan 2021

Ligand Assisted Growth Of Perovskite Single Crystals With Low Defect Density, Ye Liu, Xiaopeng Zheng, Yanjun Fang, Ying Zhou, Zhenyi Ni, Xun Xiao, Shangshang Chen, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

A low defect density in metal halide perovskite single crystals is critical to achieve high performance optoelectronic devices. Here we show the reduction of defect density in per[1]ovskite single crystals grown by a ligand-assisted solution process with 3‐(decyldimethy[1]lammonio)‐propane‐sulfonate inner salt (DPSI) as an additive. DPSI ligands anchoring with lead ions on perovskite crystal surfaces not only suppress nucleation in solution, but also regulate the addition of proper ions to the growing surface, which greatly enhances the crystal quality. The grown CH3NH3PbI3 crystals show better crystallinity and a 23-fold smaller trap density of 7 × 10 …

Go to article

Social Connectedness And Negative Affect Uniquely Explain Individual Differences In Response To Emotional Ambiguity, Maital Neta, Rebecca L. Brock Jan 2021

Social Connectedness And Negative Affect Uniquely Explain Individual Differences In Response To Emotional Ambiguity, Maital Neta, Rebecca L. Brock

Department of Mechanical and Materials Engineering: Faculty Publications

Negativity bias is not only central to mood and anxiety disorders, but can powerfully impact our decision-making across domains (e.g., financial, medical, social). This project builds on previous work examining negativity bias using dual-valence ambiguity. Specifically, although some facial expressions have a relatively clear negative (angry) or positive valence (happy), surprised expressions are interpreted negatively by some and positively by others, providing insight into one’s valence bias. Here, we examine putative sources of variability that distinguish individuals with a more negative versus positive valence bias using structural equation modeling. Our model reveals that one’s propensity toward negativity (operationalized as temperamental …

Go to article

Direct Numerical Simulation Of A Pulsatile Flow In A Stenotic Channel Using Immersed Boundary Method, Siamak Mirfendereski, Jae Sung Park Jan 2021

Direct Numerical Simulation Of A Pulsatile Flow In A Stenotic Channel Using Immersed Boundary Method, Siamak Mirfendereski, Jae Sung Park

Department of Mechanical and Materials Engineering: Faculty Publications

A three-dimensional direct numerical simulation model coupled with the immersed boundary method has been developed to simulate a pulsatile flow in a planar channel with single and double one-sided semicircular constrictions. For relevance to blood flow in large arteries, simulations have been performed at Reynolds numbers of 750 and 1000. Flow physics and resultant wall shear stress (WSS)-based hemodynamic parameters are presented. The instantaneous vortex dynamics, mean flow characteristics, and turbulent energy spectra are evaluated for flow physics. Subsequently, three WSS-based parameters, namely the time-averaged WSS, oscillatory shear index, and relative residence time, are calculated over the stenotic wall and …

Go to article

Large-Scale Synthesis Of Compressible And Re-Expandable Three-Dimensional Nanofiber Matrices, Alec Mccarthy, Lorenzo Saldana, Daniel Mcgoldrick, Johnson V. John, Mitchell Kuss, Shixuan Chen, Bin Duan, Mark A. Carlson, Jingwei Xie Jan 2021

Large-Scale Synthesis Of Compressible And Re-Expandable Three-Dimensional Nanofiber Matrices, Alec Mccarthy, Lorenzo Saldana, Daniel Mcgoldrick, Johnson V. John, Mitchell Kuss, Shixuan Chen, Bin Duan, Mark A. Carlson, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Due to their biomimetic properties, electrospun nanofibers have shown great potential in many biomedical fields. However, traditionally-produced nanofibers are typically two-dimensional (2D) membranes limiting their applications. Herein, we report a large-scale synthesis of compressible and reexpandable three-dimensional (3D) nanofiber matrices for potential biomedical applications. The reproducible mass production of such matrices is achieved using a multiple-emitter electrospinning machine with a controlled environment (e.g., temperature, humidity, and air flow rate) followed by an innovative gas-foaming expansion. The modified 20-emitter circular array with 3D-printed needle caps is capable of maintaining stable Taylor cones under extremely high flow rates. The introduction of such …

Go to article

Assembly Of Close-Packed Ferroelectric Polymer Nanowires Via Interface-Epitaxy With Res2, Dawei Li, Shuo Sun, Kun Wang, Zahra Ahmadi, Jeffrey E. Shield, Stephen Ducharme, Xia Hong Jan 2021

Assembly Of Close-Packed Ferroelectric Polymer Nanowires Via Interface-Epitaxy With Res2, Dawei Li, Shuo Sun, Kun Wang, Zahra Ahmadi, Jeffrey E. Shield, Stephen Ducharme, Xia Hong

Department of Mechanical and Materials Engineering: Faculty Publications

The flexible, transparent, and low-weight nature of ferroelectric polymers makes them promising for wearable electronic and optical applications. To reach the full potential of the polarization-enabled device functionalities, large-scale fabrication of polymer thin films with well-controlled polar directions is called for, which remains a central challenge. The widely exploited Langmuir–Blodgett, spin-coating, and electrospinning methods only yield polymorphous or polycrystalline films, where the net polarization is compromised. Here, an easily scalable approach is reported to achieve poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE) thin films composed of close-packed crystalline nanowires via interface-epitaxy with 1T′-ReS2. Upon controlled thermal treatment, uniform P(VDF-TrFE) films restructure into …

Go to article

Reducing Corrosion Of Additive Manufactured Magnesium Alloys By Interlayer Ultrasonic Peening, M. P. Sealy, R. Karunakaran, S. Ortgies, G. Madireddy, A. P. Malshe, K. P. Rajurkar Jan 2021

Reducing Corrosion Of Additive Manufactured Magnesium Alloys By Interlayer Ultrasonic Peening, M. P. Sealy, R. Karunakaran, S. Ortgies, G. Madireddy, A. P. Malshe, K. P. Rajurkar

Department of Mechanical and Materials Engineering: Faculty Publications

Additive manufad (AM) magn alloys corrode rapidly due to tensile stress and coarse microstructures. Cyclically combining (hybridizing) additive manufacturing with interlayer ultrasonic peening was proposed as a solution to improve corrosion resistance of additive manufactured magnesium WE43 alloy through strengthening mechanisms and compressive residual stress. Applying interlayer peening work hardened discrete layers and formed a glocal integrity of regional grain refinement and subsurface compressive residual stress barriers. Tensile residual stress that typically accelerates corrosion decreased 90%. Results showed time-resolved control over corrosion was attainable by interlayer peening, and local corrosion within print cells decreased 57% with respect to as-printed WE43.

Go to article

Ultra-Fast Charging In Aluminum-Ion Batteries: Electric Double Layers On Active Anode, Xuejing Shen, Tao Sun, Lei Yang, Alexey Krasnoslobodtsev, Renat F. Sabirianov, Michael P. Sealy, Wai-Ning Mei, Zhanjun Wu, Li Tan Jan 2021

Ultra-Fast Charging In Aluminum-Ion Batteries: Electric Double Layers On Active Anode, Xuejing Shen, Tao Sun, Lei Yang, Alexey Krasnoslobodtsev, Renat F. Sabirianov, Michael P. Sealy, Wai-Ning Mei, Zhanjun Wu, Li Tan

Department of Mechanical and Materials Engineering: Faculty Publications

With the rapid iteration of portable electronics and electric vehicles, developing high-capacity batteries with ultra-fast charging capability has become a holy grail. Here we report rechargeable aluminum-ion batteries capable of reaching a high specific capacity of 200 mAh g−1. When liquid metal is further used to lower the energy barrier from the anode, fastest charging rate of 104 C (duration of 0.35 s to reach a full capacity) and 500% more specific capacity under high-rate conditions are achieved. Phase boundaries from the active anode are believed to encourage a high-flux charge transfer through the electric double layers. As …

Go to article

Twinning-Assisted Dynamic Adjustment Of Grain Boundary Mobility, Qishan Huang, Qi Zhu, Yingbin Chen, Mingyu Gong, Jixue Li, Ze Zhang, Wei Yang, Jian Wang, Haofei Zhou, Jiangwei Wang Jan 2021

Twinning-Assisted Dynamic Adjustment Of Grain Boundary Mobility, Qishan Huang, Qi Zhu, Yingbin Chen, Mingyu Gong, Jixue Li, Ze Zhang, Wei Yang, Jian Wang, Haofei Zhou, Jiangwei Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Grain boundary (GB) plasticity dominates the mechanical behaviours of nanocrystalline materials. Under mechanical loading, GB configuration and its local deformation geometry change dynamically with the deformation; the dynamic variation of GB deformability, however, remains largely elusive, especially regarding its relation with the frequently-observed GB-associated deformation twins in nanocrystalline materials. Attention here is focused on the GB dynamics in metallic nanocrystals, by means of well-designed in situ nanomechanical testing integrated with molecular dynamics simulations. GBs with low mobility are found to dynamically adjust their configurations and local deformation geometries via crystallographic twinning, which instantly changes the GB dynamics and enhances the …

Go to article

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr. Jan 2021

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr.

Library Philosophy and Practice (e-journal)

Modelling is a way of constructing a virtual representation of software and hardware that involves a real-world device. We will discover the behaviour of the system if the software elements of this model are guided by mathematical relationships. For testing conditions that may be difficult to replicate with hardware prototypes alone, modelling and simulation are particularly useful, especially in the early phase of the design process when hardware might not be available. Model-based approach in MATLAB-Simulink can be useful for predictive maintenance of machines as it can reduce unplanned downtimes and maintenance costs when industrial equipment breaks. Through this bibliometric …

Go to article

Electron Microscopy Observation Of Electric Field-Assisted Sintering Of Stainless Steel Nanoparticles, Fei Wang, Qin Zhou, Xing-Zhong Li, Yongchul Yoo, Michael Nastasi, Bai Cui Jan 2021

Electron Microscopy Observation Of Electric Field-Assisted Sintering Of Stainless Steel Nanoparticles, Fei Wang, Qin Zhou, Xing-Zhong Li, Yongchul Yoo, Michael Nastasi, Bai Cui

Department of Mechanical and Materials Engineering: Faculty Publications

The intrinsic role of electrical current on the electric field-assisted sintering (EFAS) process of stainless steel 316L nanoparticles has been revealed by both ex situ and in situ experiments. A novel device on the Si chip has been designed and fabricated to fit into the sample holder of a transmission electron microscope for these experiments. The evolution of nanoparticle morphology and microstructures during the EFAS process has been studied using scanning electron microscopy and transmission electron microscopy, which has been combined with the simultaneous measurement of the electric voltage and current changes. A preliminary four-stage mechanism for the EFAS process …

Go to article

A Bibliometric Analysis Of Ultrasonic Vibration Assisted Turning, Govind S. Ghule, Sudarshan Sanap Prof. Dr. Jan 2021

A Bibliometric Analysis Of Ultrasonic Vibration Assisted Turning, Govind S. Ghule, Sudarshan Sanap Prof. Dr.

Library Philosophy and Practice (e-journal)

Ultrasonic vibration-assisted turning (UVAT) is a new crossover in machining techniques which uses high frequency, low amplitude sound waves which are further superimposed on the cutting tool in traditional turning. This innovative technology is being utilized over the decades due to its conspicuous influence contrasted with traditional approach particularly in turning of hard-to-machine materials. This present paper analyses the past explores in the arena of ultrasonic vibration-assisted turning, by a far-reaching bibliometric investigation. The analysis is carried out by scrutinizing the studies through Science Direct and Scopus database to select the peer-reviewed papers. The advanced research tools like the word …

Go to article

Opportunistic Maintenance Strategy Of A Heave Compensation System For Expected Performance Degradation, Chao Zhang, Yujie Qian, Hongyan Dui, Shaoping Wang, Rentong Chen, Mileta M. Tomovic Jan 2021

Opportunistic Maintenance Strategy Of A Heave Compensation System For Expected Performance Degradation, Chao Zhang, Yujie Qian, Hongyan Dui, Shaoping Wang, Rentong Chen, Mileta M. Tomovic

Engineering Technology Faculty Publications

In the marine industry, heave compensation systems are applied to marine equipment to compensate for the adverse effects of waves and the hydraulic system is usually used as the power system of heave compensation systems. This article introduces importance theory to the opportunistic maintenance (OM) strategy to provide guidance for the maintenance of heave compensation systems. The working principle of a semi-active heave compensation system and the specific working states of its hydraulic components are also first explained. Opportunistic maintenance is applied to the semi-active heave compensation system. Moreover, the joint integrated importance measure (JIIM) between different components at different …

Go to article

Development Of An Undergraduate Welding Laboratory For Research And Education, Hamid Eisazadeh, Alok K. Verma Jan 2021

Development Of An Undergraduate Welding Laboratory For Research And Education, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

The shortage of welders in Hampton Roads area, where many shipyards are located, is becoming severe for shipbuilding in coming years. Many welding engineers graduated from universities located out of state, tend to go back to companies near their home, after receiving couple years of welding experience at Hampton Roads shipyards. Therefore, it is critical to train local welders. In order to address the welding workforce needs of Hampton Roads, the Department of Engineering Technology at Old Dominion University has recently launched an initiative for developing a laboratory for welding processes (LWP) for supporting educational and research activities in its …

Go to article

On The Improvements Of Boundary-Layer Representation For High Resolution Weather Forecasting In Costal-Urban Environments, David Melecio-Vazquez Jan 2021

On The Improvements Of Boundary-Layer Representation For High Resolution Weather Forecasting In Costal-Urban Environments, David Melecio-Vazquez

Dissertations and Theses

As large urban centers around the world become more densely populated, the global conversion from natural to man-made land surfaces will only increase. These land-use changes affect the urban surface energy budget which in turn changes the structure of the planetary boundary layer (PBL) above. With current high-performance computing systems, meteorological and built environment information can be better utilized to quantify the anthropogenic effects of these modifications. Although these systems have improved forecasting near-surface weather conditions, a comprehensive approach to represent urban impacts on the PBL is still limited. Improved PBL representation can lead to better weather and climate forecasts, …

Go to article

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand Jan 2021

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Go to article

The Diffuse Bounce Back Lattice Boltzmann Method And Its Applications On The Study Of Fluid-Particle Interactions, Geng Liu Jan 2021

The Diffuse Bounce Back Lattice Boltzmann Method And Its Applications On The Study Of Fluid-Particle Interactions, Geng Liu

Dissertations and Theses

Fluid-structure interaction is very broadly seen and widely used in many industrial, engineering and environmental processes. The lattice Boltzmann method has been preferred for simulating particulate flows due to its advantages of easy implementation, micro- and mesoscopic physical insights and parallel algorithm. Both sharp and diffuse boundary treatments are studied to recover curved and moving boundaries on structured orthogonal grids for the lattice Boltzmann method. These methods can describe curved boundaries more accurately and more smoothly than the naive staircase approximation. However, to improve the order of velocity accuracy and to reduce the fluctuation of force, either interpolation or additional …

Go to article

Transition To Turbulence And Relaminarization Of Pulsatile Pipe Flows, Joan Gomez Jan 2021

Transition To Turbulence And Relaminarization Of Pulsatile Pipe Flows, Joan Gomez

Dissertations and Theses

The instability and transition to turbulence and its evolution in pulsatile pipe flows involving both, reverse and no-reverse flows, is the primary focus of this experimental work. A piston driven by a programable DC servo motor was used to set up a water flow system and provide the pulsation characteristics. Time-resolved particle image velocimetry data were acquired in a refractive index matching setup by using a continuous wave laser and a high-frame-rate digital camera. The position of the piston was continuously recorded by a laser proximity sensor. Different experiments were carried out with Reynolds numbers in the range of 535 …

Go to article

Mid-Infrared Laser Absorption Spectroscopy And Ignition Delay Time Measurements Of Advanced Renewable Fuels At High Pressure In A Shock Tube, Erik Ninnemann Jan 2021

Mid-Infrared Laser Absorption Spectroscopy And Ignition Delay Time Measurements Of Advanced Renewable Fuels At High Pressure In A Shock Tube, Erik Ninnemann

Electronic Theses and Dissertations, 2020-2023

The United States government has set 2050 as the target for net-zero greenhouse gas emissions due to their increasing levels and the subsequent rise in global temperatures. To meet this target, there has been renewed interest in the combustion of high-energy biofuels that could combat these issues. Thus, the Department of Energy started the Co-Optimization of Fuels and Engines program to find bioderived blendstocks that can harmonize with current and future generation engines to increase power and efficiency, all while reducing overall emissions. As part of this program, it is crucial to understand the combustion of these fuels at the …

Go to article

Understanding Forearm Muscle Coordination In Children, Miguel Gonzalez Jan 2021

Understanding Forearm Muscle Coordination In Children, Miguel Gonzalez

Electronic Theses and Dissertations, 2020-2023

A combination of surface electromyography (EMG) and pattern recognition algorithms have led to improvements in the functionality of upper limb prosthetics. This method of control relies on user's ability to repeatedly generate consistent muscle contractions. Research in EMG based control of prosthesis has mainly utilized adult subjects who have fully developed neuromuscular control. Little is known about children's ability to generate consistent EMG signals necessary to control artificial limbs with multiple degrees of freedom. To address this gap, two experiments were designed to validate and benchmark an experimental protocol that quantifies the ability to coordinate forearm muscle contractions in able-bodied …

Go to article

The Critical Role Of Dynamic Surface Tension Of Surfactants On The Impact Dynamics Of Water Droplets, Amir Esmaeili, Reza Mohammadi Jan 2021

The Critical Role Of Dynamic Surface Tension Of Surfactants On The Impact Dynamics Of Water Droplets, Amir Esmaeili, Reza Mohammadi

Graduate Research Posters

Due to their time-dependent surface tension, the addition of surface-active agents or surfactants to water for specific applications has made controlling the impact dynamics of these droplets a complex phenomenon. This work investigates the influence of the molecular weight, concentration, and ionic nature of the surfactants as well as the substrate surface characteristics on the impact dynamics of surfactant-laden droplets using a high-speed camera at 10000 frames per second. Sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used as anionic, cationic, and nonionic surfactants, respectively. We used hydrophilic glass slides, hydrophobic polytetrafluoroethylene, and superhydrophobic alkyl ketene dimer (AKD) as substrates. …

Go to article

Electroosmotic Flow Of Viscoelastic Fluid Through A Constriction Microchannel, Jianyu Ji, Shizhi Qian, Zhaohui Liu Jan 2021

Electroosmotic Flow Of Viscoelastic Fluid Through A Constriction Microchannel, Jianyu Ji, Shizhi Qian, Zhaohui Liu

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) has been widely used in various biochemical microfluidic applications, many of which use viscoelastic non-Newtonian fluid. This study numerically investigates the EOF of viscoelastic fluid through a 10:1 constriction microfluidic channel connecting two reservoirs on either side. The flow is modelled by the Oldroyd-B (OB) model coupled with the Poisson–Boltzmann model. EOF of polyacrylamide (PAA) solution is studied as a function of the PAA concentration and the applied electric field. In contrast to steady EOF of Newtonian fluid, the EOF of PAA solution becomes unstable when the applied electric field (PAA concentration) exceeds a critical value for …

Go to article

Simulation Of Particle Transport In A Multi-Component Flow With A High Viscosity Ratio Driven By Slender Structures, Michael Roeing-Donna Jan 2021

Simulation Of Particle Transport In A Multi-Component Flow With A High Viscosity Ratio Driven By Slender Structures, Michael Roeing-Donna

Graduate Research Theses & Dissertations

Simulating particle transport in multi-component fluid flows driven by slender structures is important but challenging, especially when dealing with large viscosity ratios. In this thesis, a general multi-physics model is introduced to handle multi-component fluid flows, slender beating structures, immersed particles/droplets, and their interactions. This multi-physics model has been validated with analytical solutions and other published experimental and numerical results for the mean mucous velocity. The validated model is used to study particle transport in nasal mucous layer, the interplay between cilia and fluid flow. The model shows that mucous-pericilairy layer interface and mucous-air interface remain a constant height throughout …

Go to article

Modeling Study Of Electrocoagulation System For Treating Wastewater, Swachwa Dey Jan 2021

Modeling Study Of Electrocoagulation System For Treating Wastewater, Swachwa Dey

Graduate Research Theses & Dissertations

Effective treatment of wastewater from households, communities, and industries is vital to preserve our environment. Chemical treatment to add coagulants into the wastewater is the most popular treatment method, but due to the high operating cost and secondary contamination issue, a novel method to solve those issues is required. In this study, we revisited the electro-coagulation (EC) system which has promising features of low system/operating cost and environment friendly process. EC was actively developed once, but due to the low efficiency and scaling-up issues, it could not be fully utilized. In this study, physics-based mathematical model was developed to elucidate …

Go to article

Assessing The Effectiveness Of Cfd To Solve An Inverse Problem Of Thermal Profiles For The Protodune-Sp Neutrino Detector, Cecilia Anne Streff Jan 2021

Assessing The Effectiveness Of Cfd To Solve An Inverse Problem Of Thermal Profiles For The Protodune-Sp Neutrino Detector, Cecilia Anne Streff

Electronic Theses and Dissertations

Computational fluid dynamics (CFD) is a branch of fluid mechanics which is employed to numerically solve complex fluid, heat transfer, and multiphysics problems. Traditionally, CFD techniques are used to solve “forward” problems—using some known information of a system as inputs to a representative model to predict experimental measurements or expected system behavior. The work presented here demonstrates how CFD may be used to solve an “inverse” problem—given limited experimental data and some model, predict (previously unidentified) “input” system (or system model) parameters. The case study for this research uses a validated CFD modeling approach of the liquid argon (LAr) region …

Go to article

Morphology Control Of One-Dimensional Gallium Nitride Nanostructures By Modulating The Crystallinity Of Sacrificial Gallium Oxide Templates, Yun Taek Ko, Mijeong Park, Jingyeong Park, Jaeyun Moon, Yong Ho Choa, Young In Lee Jan 2021

Morphology Control Of One-Dimensional Gallium Nitride Nanostructures By Modulating The Crystallinity Of Sacrificial Gallium Oxide Templates, Yun Taek Ko, Mijeong Park, Jingyeong Park, Jaeyun Moon, Yong Ho Choa, Young In Lee

Mechanical Engineering Faculty Research

In this study, we demonstrated a method of controllably synthesizing one-dimensional nanostructures having a dense or a hollow structure using fibrous sacrificial templates with tunable crystallinity. The fibrous ga2o3 templates were prepared by calcining the polymer/gallium precursor nanofiber synthesized by an electrospinning process, and their crystallinity was varied by controlling the calcination temperature from 500oC to 900oC. gaN nanostructures were transformed by nitriding the ga2o3 nanofibers using NH3 gas. All of the transformed gaN nanostructures maintained a one-dimensional structure well and exhibited a diameter of about 50 nm, but their morphology was clearly distinguished according to the crystallinity of the …

Go to article

Direct Energy Deposition Of Mo Powder Prepared By Electrode Induction Melting Gas Atomization, Goo Won Roh, Eun Soo Park, Jaeyun Moon, Hojun Lee, Jongmin Byun Jan 2021

Direct Energy Deposition Of Mo Powder Prepared By Electrode Induction Melting Gas Atomization, Goo Won Roh, Eun Soo Park, Jaeyun Moon, Hojun Lee, Jongmin Byun

Mechanical Engineering Faculty Research

Molybdenum (Mo) is used to form a barrier layer for metal wiring in displays or semiconductor devices. Recently, researches have been continuously attempted to fabricate Mo sputtering targets through additive manufacturing. in this study, spherical Mo powders with an average particle size of about 37 um were manufactured by electrode induction melting gas atomization. Subsequently, Mo layer with a thickness of 0.25 mm was formed by direct energy deposition in which the scan speed was set as a variable. According to the change of the scan speed, pores or cracks were found in the Mo deposition layer. Mo layer deposited …

Go to article

Effect Of Heat Treatment On Microstructure And Hardness Of A Worn Rail Repaired Using Laser Powder Deposition, Ershad Mortazavian, Zhiyong Wang, Hualiang Teng Jan 2021

Effect Of Heat Treatment On Microstructure And Hardness Of A Worn Rail Repaired Using Laser Powder Deposition, Ershad Mortazavian, Zhiyong Wang, Hualiang Teng

Mechanical Engineering Faculty Research

The frequent replacement of worn rails on tracks brings an immense economic burden on the railroad industry, and also causes significant interruptions to railroad operation. Restoration of worn rails via laser powder deposition (LPD) can considerably reduce the associated maintenance costs. This study was focused on the use of LPD to repair the worn profile of a standard U.S. rail. The microstructure of the 304L stainless steel deposits with a minimum hardness of 85 HRB was composed of austenite, δ-ferrite, and sigma. Micropores were dispersed throughout the deposit, and microcracks were found at the rail-deposition interface. The pearlitic rail substrate …

Go to article

First Prev Next Last