Mechanical Engineering Commons^™

Effect Of Nonlinear Mixing On Electrospray Propulsion Predictions, Mitchell J. Wainwright, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

The Effect Of Laser Welding Modes On Mechanical Properties And Microstructure Of 304l Stainless Steel Parts Fabricated By Laser-Foil-Printing Additive Manufacturing, Chia Hung Hung, Wei Ting Chen, M. Hossein Sehhat, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The success of laser-foil-printing (LFP) additive manufacturing depends critically on the laser welding of sheet metals onto the substrate or the previous layer during the part fabrication process. The welding can be generally categorized into two modes: conduction mode and keyhole mode. In this study, 304L stainless steel parts fabricated by the LFP process using the two laser welding modes are compared. The porosity, microstructure, and tensile properties of the fabricated parts in these two modes are measured and compared in the laser scanning direction (X) and part building direction (Z). The parts fabricated in the conduction mode have a …

Pore Microstructure Impacts On Lithium Ion Transport And Rate Capability Of Thick Sintered Electrodes, Ziyang Nie, Rohan Parai, Chen Cai, Charles Michaelis, Jacob M. Lamanna, Daniel S. Hussey, David L. Jacobson, Dipankar Ghosh, Gary M. Koenig Jr.

Mechanical & Aerospace Engineering Faculty Publications

Increasing electrode thickness is one route to improve the energy density of lithium-ion battery cells. However, restricted Li⁺ transport in the electrolyte phase through the porous microstructure of thick electrodes limits the ability to achieve high current densities and rates of charge/discharge with these high energy cells. In this work, processing routes to mitigate transport restrictions were pursued. The electrodes used were comprised of only active material sintered together into a porous pellet. For one of the electrodes, comparisons were done between using ice-templating to provide directional porosity and using sacrificial particles during processing to match the geometric density …

A Geometric Description Of The Set Of Stabilizing Pid Controllers, Keqin Gu, Qian Ma, Huiqing Zhou, Mahzoon Salma, Xingzi Yang

SIUE Faculty Research, Scholarship, and Creative Activity

This article developed a new method to described the set of stabilizing PID control. The method is based on D-parameterization with natural description of the set. It was found that the stability crossing surface is a ruled surface that is completely determined by a curve known as discriminant. The discriminant is divided into sectors at the cusps. Corresponding to the sectors, the stability crossing surface is divided into positive and negative patches. A systematic study is conducted to identify the regions with a fixed number of right half-plane characteristic roots. The crossing directions of characteristic roots for positive patches and …

Bicycle Wheel Aerodynamics Predictions Using Cfd: Efficiency Using Blade Element Method, Drew Vigne

Honors Undergraduate Theses

The cycling industry has long relied on expensive wind tunnel testing when designing aerodynamic products, particularly in the context of wheels which account for 10 to 15 percent of a cyclist's total aerodynamic drag. With the recent advent of Computational Fluid Dynamics (CFD), the industry now has an economical tool to supplement the wheel design process; however, the complex nature of rotating spoked wheels requires high resolution meshes to model at acceptable fidelity. This research investigates an alternative CFD method that lowers the computational cost of modeling aerodynamic bicycle wheels by modeling spokes using Blade Element Method (BEM). Two CFD …

Workspace And Kinematic Modeling And Analysis Of Semi-Robotic Laparoscopic Surgery, Immanuel E. Girgis

Honors Undergraduate Theses

Laparoscopic Surgery has been revolutionized by the world of Surgical Robotics. Robot-Assisted Surgeries have been proven to have many advantages over the fundamental, traditional "by-hand" procedures previously conducted, and still currently being done for certain operations. Robot-assisted surgery may offer benefits to patients through the use of minimally invasive techniques, which may result in reduced blood loss, reduced blood transfusion, fewer complications, reduced postoperative pain, shorter hospital stays, and reduced recovery times (Ho et al., 2011). Studies have proven that robotic surgery may lead to patients recovering faster depending on the timeframe and the type of procedure (Tang et al., …

Development And Characterization Of Flow Independent Fuel Injectors, Michael W. Kwara

Honors Undergraduate Theses

Jet-in-crossflow is an interaction between a fuel jet and air crossflow commonly found in jet engines. The crossflow is used to break up or atomize the fuel jet for downstream combustion. This interaction between fluids while at low speeds, is predictable, varies greatly at higher speeds. This investigation seeks to (1) create a mechanism for jet-in-crossflow, using mechanical pintles, that is independent of velocity to help increase the predictability and reliability of jet engines and (2) identify key design parameters that will lead to flow independence. Parameters investigated in this experiment include pintle height, angle, and percent of pintle coverage …

Investigation Of Various Jet Configurations On Jet-In Crossflow Flame Characteristics At Elevated Pressures, Max K. Fortin

Honors Undergraduate Theses

The goal of this study is to investigate how varying the configuration of an axially staged combustion test facility affects the resultant flame and its relevant characteristics. Such relevant characteristics are the jet liftoff and the centerline jet trajectory. The configurations that are primarily being investigated are varied jet configuration diameters, 4mm and 12.7mm, preheated and non-preheated fuel, and different fuels. The testing facility is located at the University of Central Florida in the PERL (Propulsion and Energy Research Lab) facility. The facility allows for modeling an industrial turbine combustor, specifically an axial staged combustor with a Jet-In-Crossflow …

The Stability Of Two-Dimensional Cylinder Wakes In The Presence Of A Wavy Ground, Matt Duran

Honors Undergraduate Theses

The following study investigates hydrodynamic stability for two-dimensional, incompressible flow past a cylinder and compares it alongside four different variations of a wave-like ground introduced within the wake region of the cylinder wake. These different variations include changing the distance of the cylinder both horizontally from the wave-like structure and vertically from the ground. The geometry and meshes were initially constructed using GMSH and imported into Nektar++. The baseflows were then obtained in Nektar++ using the Velocity Correction Scheme, continuous Galerkin method, and Unsteady Navier Stokes solver. Then, the Implicitly Restarted Arnoldi Method driver was used to retrieve the various …

Experimental And Chemical Kinetics Investigation Of High-Temperature Combustion Of Diisopropyl Methylphosphonate., Ramees Khaleel Rahman

Electronic Theses and Dissertations, 2020-2023

Due to the high toxicity of chemical warfare (CW) agents, laboratory experiments are carried out using CW surrogates. Diisopropyl Methylphosphonate (DIMP), an organophosphate compound (OPC), is a crucial CW surrogate that has a chemical structure like the deadly nerve agent Sarin (GB). In this work, high-temperature combustion of DIMP is studied in a shock tube to understand the kinetics of destruction of DIMP. Laser absorption spectroscopy was used to obtain carbon monoxide mole fraction time-histories during high-temperature combustion of DIMP. Since combustion involves complex mixing phenomena involving different fuel to oxidizer ratios, experiments were conducted at conditions relevant to a) …

The Effect Of Dynamic Span Wise Bending On The Forces Of A Pitching Flat Plate, Manoj Prabakar Sargunaraj

Electronic Theses and Dissertations, 2020-2023

A novel experiment has been conducted to investigate the effect of dynamic spanwise bending on the formation of a dynamic stall vortex on a rapidly pitching flat plate. Experiments have been performed in a towing tank at different nondimensional pitch rates (Kp) in the range of 0.4112 < Kp < 0.8225, and four maximum pitch angles (30° , 45°, 60°, and 90°) at a Reynolds number of 12,000. Synchronized direct force measurements and particle image velocimetry (PIV) are used to characterize the effect of bending on the unsteady forces and the flow field. An unsteady analytical model based on the bending and pitching kinematics is used to model the lift force histories. It is found that a spanwise bending of a pitching wing alleviated the unsteady lift forces. However, the main contribution was found to come from the non-circulatory forces. The circulation and pressure analysis of the pitching wing revealed little or no sensitivity to the wing bending motions examined.

Experimental Characterization And Crystal Plasticity Modeling Of Mechanical Properties And Microstructure Evolution Of Additively Manufactured Inconel 718 Superalloy, Saeede Ghorbanpour

Doctoral Dissertations

In this thesis, the mechanical behavior of the additively manufactured (AM) IN718 nickel-based superalloy and their correlations with the evolution of microstructure are studied comprehensively. The effects of manufacturing parameters, build orientations, and post processing procedures, i.e. standard heat treatment and hot isostatic pressing (HIP), on various mechanical properties including monotonic compression and tension strength, low cyclic fatigue performance, high cyclic fatigue behaviour, and fatigue crack growth behavior are investigated. Due to the high temperature applications of the IN718 alloy, elevated temperature properties are examined as well. Electron Backscattered Diffraction (EBSD) technique is employed to measure the initial and deformed …

Localization Of Stationary Source Of Floor Vibration Using The Steered Response Power Method, Mohammad Royvaran

Theses and Dissertations--Civil Engineering

If the generated vibration in a building exceeds the acceptable limit design for a floor system, it is necessary to identify the source of vibration, a process known as localization. The objective of this study is the localization of stationary vibration sources, and the approach used is the steered response power (SRP) method. This method has already been shown to work well for wireless and acoustical applications to locate transmitter and sound sources, respectively. To the writer’s knowledge, this study is the first application of the SRP method to locate vibration sources using floor vibration measurements. However, because waves behave …

Measurements Of Wind Turbine Wake Evolution And Trajectory During Morning Boundary Layer Transition And Under Wake Steering Conditions Via Unmanned Aerial Vehicles, Stewart Nelson

Theses and Dissertations--Mechanical and Aerospace Engineering

In July of 2019, a flight campaign was conducted using semi-autonomous Unmanned Aerial Vehicles (UAVs) at the Port Alma Kruger Energy wind farm in Ontario, Canada, to study various aspects of wind turbine wake evolution. Horizontal transects across the wakes were measured using modified fixed-wing aircraft fitted with a five-hole probe to measure the wind velocity vector. Reference boundary layer conditions were measured by an octocopter with an assortment of mounted sensors flying vertical profiles upstream of the turbines. Three experiments were conducted during the campaign, which consisted of a study on wake behavior during the morning boundary layer transition, …

Prediction Of Noise Emissions Using Panel Contribution Analysis Supplemented With Scale Modeling, Gong Cheng

Theses and Dissertations--Mechanical and Aerospace Engineering

Panel contribution analysis (PCA) can be used to predict machinery noise emissions, component contributions, and to assess the impact of sound reduction treatments. PCA is a measurement approach that is advantageous for complex machinery that is not easily modeled using conventional numerical analysis approaches. In this research, PCA is combined with scale modeling in order to speed up the necessary measurement work. Moreover, the method can be applied to much larger machinery and noise emissions can be assessed prior to locating and installing the equipment. This eliminates the necessity to use voluminous anechoic chambers.

The machinery is first discretized into …

Kinetics Of Elementary Reactions In Graphene Oxidation And Kinetics Of Oh* In Hydrogen Flames, Siamak Mahmoudi

Theses and Dissertations--Mechanical and Aerospace Engineering

Due to diverse applications of graphene, a kinetic mechanism describing rates of elementary reactions is extremely useful. To achieve that goal the elementary reactions need to be detected and their rates need to be determined. In this work the objectives are to use first-principle tools to find those reactions and analyze their paths in the context of graphene oxidation. Density functional theory (DFT) calculations provide the best approximation to the Schr\"{o}dinger equation, which is not feasible to solve analytically for large molecules like graphene. We have performed these calculations to find stable configurations (geometry optimization) and minimum energy paths between …

Balancing Trade-Offs In One-Stage Production With Processing Time Uncertainty, Jingjing You

Theses and Dissertations--Mechanical and Aerospace Engineering

Stochastic production scheduling faces three challenges, first the inconsistencies among key performance indicators (KPIs), second the trade-offs between the expected return and the risk for a portfolio of KPIs, and third the uncertainty in processing times. Based on two inconsistent KPIs of total completion time (TCT) and variance of completion times (VCT), we propose our trade-off balancing (ToB) heuristic for one-stage production scheduling. Through comprehensive case studies, we show that our ToB heuristic with preference =0.0:0.1:1.0 efficiently and effectively addresses the three challenges. Moreover, our trade-off balancing scheme can be generalized to balance a number of …

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

A Theoretical Study On Integration And Optimization Of Gas Turbine Problems With Solar Energy System, Ahmad M. Abubaker

Theses and Dissertations--Mechanical and Aerospace Engineering

Gas Turbine (GT) power plants suffer from sensitivity to ambient-air temperatures, high fuel consumption, and a high amount of waste heat dumped into the ambient. Various solutions were proposed to solve these drawbacks, which could simultaneously solve at most two problems, usually at the expense of the third. For instance, inlet-air cooling can reduce ambient-air temperatures but will result in increased fuel consumption. However, in this work, a novel cascaded system was integrated into a combined cycle, capable of simultaneously solving all the aforementioned GT drawbacks. Parabolic trough collectors were used to preheat the air at the combustion chamber inlet …

The Role Of Live Conifer Fuels In Crown Fires Spread, Adnan Darwish Ahmad

Theses and Dissertations--Mechanical and Aerospace Engineering

Live foliage for some tree and shrub species can support flaming fire spread at much higher moisture content than dead fuel materials. However, the role of live fuels in forest fires has been controversial in the past decades. Although ignition and spread statistical data for live and dead fuels exist in the literature, a clear understanding of the fundamental difference in the burning behavior is missing. To illuminate the role of live fuel on forest fire spreading, a laboratory ignition experiment was designed to examine the burning behavior of live Norway spruce needles. A schlieren-Infrared combined measurement apparatus was developed …

Use Of Microscale Hydrophobic Surface Features For Integration Of 3d Cell Culture Into Multi-Functional Microfluidic Devices, Soroosh Torabi

Theses and Dissertations--Mechanical and Aerospace Engineering

3D cell culture and microfluidics both represent powerful tools for replicating critical components of the cell microenvironment; however, challenges involved in integration of the two and compatibility with standard tissue culture protocols still represent a steep barrier to widespread adoption. Here we demonstrate the use of engineered surface roughness in the form of microfluidic channels to integrate 3D cell-laden hydrogels and microfluidic fluid delivery. When a liquid hydrogel precursor solution is pipetted onto a surface containing open microfluidic channels, the solid/liquid/air interface becomes pinned at sharp edges such that the hydrogel forms the “fourth wall” of the channels upon solidification. …

Multiscale Finite Element Modeling Of Active Contraction In Striated Muscle, Charles Kurtis Mann

Theses and Dissertations--Mechanical and Aerospace Engineering

Greater than one in three American adults have at least one type of cardiovascular disease, a major cause of morbidity. Computational cardiac mechanics has become an important part of the research effort to understand the heart’s response to mechanical stimuli and as an extension, disease progression and potential therapies. To this end, the present work aims to extend these efforts by implementing a cell level contractile model in which active stress generation in muscle tissue is driven by half-sarcomere mechanics. This is accomplished by enhancing the MyoSim model of actin and myosin in order to produce a multiscale model. This …

Evaluation Of Radiative Conductivity Inside A Porous Media With The Effect Of Participating Medium Based On Microscale Imaging, Mingping Zheng

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles will experience high loads of heat while entering the planetary atmosphere. At such high temperature, radiation becomes the dominant mode of heat transfer. Since the atmospheric entry environment is nearly impossible to duplicate in a laboratory environment, a numerical model to evaluate thermal performance of the thermal protection system was established. The model simulates the radiative heat transfer process in highly porous media, and the process also takes into account the influence of the participating media. An iterative approach and periodic boundary conditions are used to solve The unbalanced heat flux problem. CT scanned microscale Fiberform and artificial …

Viscoelasticity Of Ptfe-Based Face Seals, Bo Tan

Theses and Dissertations--Mechanical and Aerospace Engineering

PTFE-based materials are widely used in areas of tribology, particularly in seal and bearing applications because of their outstanding self-lubricating properties. Often in dynamic seal applications there is a need for ultra-low mechanical friction loss between the sealing surfaces. Due to its extremely low friction coefficient, there is interest in employing Polytetrafluoroethylene (PTFE) materials in such applications. One challenging aspect of employing PTFE is that these materials are viscoelastic and plastic. This dissertation concentrates on the modeling of viscoelastic material response when used as mechanical face seals with a focus on PTFE-based materials. First, the viscoelastic characteristics are measured through …

Study Of Stress-Based Fiber Reorientation Law In A Finite Element Model Of Cardiac Tissue, Alexus Lori Rockward

Theses and Dissertations--Mechanical and Aerospace Engineering

Myofiber organization in the heart plays an important role in achieving and maintaining physiological cardiac function. In many cardiac disease states, myofibers and particularly cardiomyocytes are disorganized in chaotic patterns, a phenotype known broadly as myocardial disarray. In familial hypertrophic cardiomyopathy (HCM), this disorganization in the form of myocyte disarray is thought to contribute to impaired cardiac function and the development of arrhythmia during disease progression. However, the mechanisms regarding fiber reorientation in the heart are yet still unclear, and few adaptative laws have been created to explore these mechanisms. A stretch-based law was developed with the aim of achieving …

Waste Heat Recovery Of Industrial Regenerative Thermal Oxidizer (Rto), A Case Study, James Trimpe Jr.

Theses and Dissertations--Mechanical and Aerospace Engineering

Industrial processes that utilize and release hazardous compounds into the atmosphere are required to break down those compounds before exhausting them from their facilities. An industry-recognized method to break down those hazardous compounds is through thermal oxidation. Thermal oxidation is a process where the compounds are exposed to their auto-ignition temperature in an oxygen-rich environment and combust. The output of thermal oxidation is carbon dioxide, water vapor, and heat. Thermal oxidizers are equipment that performs the thermal oxidation process. The heat output from thermal oxidizers is wasted if directly exhausted into the atmosphere. Regenerative thermal oxidizers (RTOs) use the waste …

Redesigning Products To Optimize Sustainable Performance In Multi-Generational Closed-Loop Production For Advancing The Circular Economy, Buddhika Minendra Hapuwatte

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable manufacturing and the circular economy concepts promote efficient and effective resource use to minimize the adverse economic, environmental, and social impacts of alarmingly increasing consumption rates. Product design is the key to implement these transformations in manufacturing. However, the currently available sustainable and circular design methods are not comprehensive and inadequate—especially for multi-generational products. Therefore, designing sustainable products optimized for circular and closed-loop production systems is a challenging task. The 6Rs concept introduced ‘Redesign’ to modify a product’s engineering specifications and allow sustainable utilization of the end-of-use resources from previous generations, thus closing the production loop. Therefore, the objective …

Experimental Investigation Of Image Distortion In A Mach 6 Hypersonic Flow, Ricky W. Green Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

The image distortion that is inherently present when imaging through a flow field at hypersonic speeds was investigated. The original problem involves observation of the outside world from the inside an aircraft moving at hypersonic speeds. For this work, a Mach 6 hypersonic wind tunnel at Wright Patterson Air Force Base (WPAFB) was used and optical patterns were imaged with and without flow field characteristics. Two test campaigns were scheduled to conduct experiments that would provide answers to the proposed problem of the effect on observable aberrations through flow fields.

During the first test campaign, October 2017, optical patterns were …

Modeling Thin Layers In Material Response Solvers, Christen Setters

Theses and Dissertations--Mechanical and Aerospace Engineering

Thermal Protection Systems (TPS) are a necessary component for atmospheric entry. Most TPS contain thin layers of various materials such as ceramic coatings, pore sealers and bonding agents. When modeling TPS, these thin layers are often neglected due to the difference in scale between the TPS (centimeters) and the thin layers (micrometers). In this study, a volume-averaging flux-conservation method is implemented in the governing equations of a finite volume material response code. The model proposes the addition of a volume and area fraction coefficient which utilizes a weighted-averaging between the amount of thin layer and heat shield material in a …

Cell And Biofilm Adhesion Strength Quantified By The Laser Spallation Technique Yields A Novel Biocompatibility Metric, The Adhesion Index, James Boyd

Theses and Dissertations--Mechanical and Aerospace Engineering

Implant associated infections are one of the leading causes of hospital acquired infections in the United States. Medical orthopedic implant devices are designed to improve adhesion of relevant cells within our body. In the case of orthopedic implants, osteoblast cells will adhere and allow for proper integration with the body’s bones. However, virulent bacteria will also adhere onto medical implants and proliferate into biofilms. Bacterial biofilms become extremely difficult to eradicate clinically as antibiotics are not as effective, resulting in severe infections or loss of implant. The aim of this research is to quantify the adhesion strength differential between relevant …