Mechanical Engineering Commons^™

Near-Shore Sediment Transport Under Cnoidal Waves Using Particle Image Velocimetry, Jenna Rose Katrina

Theses and Dissertations

With future trends showing a higher percentage of the human population living along the coast, coastal resilience is a significant topic of concern for many researchers. The purpose of this research was to analyze near-shore sediment transport under different wave parameters using the technique of Particle Image Velocimetry (PIV) and laboratory studies for linear and nonlinear cnoidal waves. At the deeper extent of the nearshore profile, waves will tend to be linear, having an Ursell number less than 40, with little or no net sediment transport due to orbital velocities. The velocities are the same under the crest and trough …

Impact Of Regional Climate Changes On Changes In River Water Content In Uzbekistan, A.T. Salokhiddinov, P.A. Khakimova, R.V. Toryanniova, O.A. Ashirova, A.G. Gofurov

Irrigation and Melioration

The paper presents the research results on the analysis of the climate change impacts on the potential of water resources in Central Asia. We analyzed the materials of an extensive database of monitoring data from numerous gauge stations on different river basins and satellite data information. A quantitative assessment of the transformation of river hydrographs, the growth of flow variability in the Republic of Uzbekistan's major rivers, in connection with climate change, was performed. The specific features of the impact of climate changes on changes in the water content of rivers in Uzbekistan in large and small river basins are …

Washing Technology For Medium And Highly Saline Soils, B.K. Saliev, M. S. Yuldashev, N.O. Shaimanov

Irrigation and Melioration

The article discusses the issues of conducting field experiments to assess the reclamation conditions of soils, which are a particular issue of managing salinity and water-salt regime, as well as increasing the efficiency of desalination. Today, 46.6% of the irrigated lands of the Republic of Uzbekistan have salinization of varying degrees, of which 30.9% are weak, 13.3% are moderate and 2.5% are highly saline. Medium and highly saline lands make up 15.8%. The essence of the proposed method of flushing from the traditional one is that in late autumn or winter, the collectors-ditches are closed, and the groundwater is artificially …

Distribution Of Calcium And Its Reserve Forms In Widespread Irrigated Gray Meadow Soils Of The Syrdarya Region, A. Akhatov

Irrigation and Melioration

The article examines the uneven distribution of calcium in reserve (general, potential, close and labile) forms in irrigated and gray-earth-meadow soils of the experimental section of the NIISSAVKH of the Gulistan district of the Syrdarya region and the farms "Sokhil" and "Ak altin" in irrigated meadow soils the form of a close reserve in the soil profile is 310 mg per 100 gr of soil. The upper layer of highly saline, medium loamy soil gradually decreases at a depth of 60-76 cm. layer. The labile calcium reserve in irrigated serozem-meadow, highly saline, medium loamy soils varies from 175 to 260 …

Design Of A Channel Straightening Route Using A Combined Dam With A Through Part Made Of Tetrahedra, M.R. Bakiev, A.B. Хаlimbetov, С.Э. Шукурова, I.J. Asamatdinov

Irrigation and Melioration

The design of the route when regulating riverbeds, the direction of the flow to the point of water intake will require solving some issues, including the amount of deviation of the dynamic axis of the flow, constrained by regulatory structures. The main purpose of this work is to develop a method for calculating the deviation of the dynamic axis of a flow that is one-way constrained by a combined dam, then through part of which is made of tetrahedra. The problem is realized using the Varignon theorem and the flow conservation equation written for the streamlines where the household state …

Improvement Of Informational-Methodological Provision On Foreign Languages For Teachers, G. Eshchanova

Irrigation and Melioration

The article discusses the innovative areas of activity, related to the use of information and communication technologies in the educational process of teachers in foreign languages in the world practice, the development of teachers professional communicative competence in teaching English, the use of information and communication, advanced pedagogical technologies in teaching to ensure the solution of such issues, as the increase in the level of development of foreign language skills, diagnostic technologies among teachers.

Дождеваsome Aspects Of Water Management In The Republic Of Uzbekistan During The Period Of Independence (Reality And Forecast), S. Khodjaev

Irrigation and Melioration

To date, there is no alternative to the introduction of the principles of integrated water resources management (IWRM), this is proved by the research of SIC ICWC on the territory of the South Fergana main canal, where the specific water supply per hectare of irrigated area has been reduced by 32% on an area of 120 thousand hectares, that is up to 7 thousand m³/ha, instead of the limited ones 10 thousand m³/ha. Researches recommend cutting off all types of collector-drainage waters (CDW) from the river trunks of the Aral Sea basin, including the Syr-Darya and Amu-Darya, since CDW are …

The Influence Of Gender Approaches On Education Efficiency, G. Eshchanova

Irrigation and Melioration

The given article covers the influence of gender approaches on education efficiency on the basis of statistical and scientific data, and the need to rely on the basis of the necessary knowledge for the ecologically sustainable development of women's knowledge, competence and entrepreneurship are shown. The educational process based on Gender differences and equality contributes significantly to the development of society.

Economic Assessment Of Factors Affecting The Decision Of Households To Engage In Non-Farm Activities, Sh.A. Muratov

Irrigation and Melioration

In this study, non-farm activities and their importance were studied, and it is analysed the influence of push and pull factors on the decision of family heads to engage in non-farm activities by Probit model regression. Furthermore, it is determined their elastic coefficients. The analysed data are collected by conducting an online survey from 134 respondents. The results are showed that the decision of family heads to engage in non-farm activities was greatly influenced by their gender, education, and number of family members, electricity supply, transport services, and size of their land. Namely, the decision of the head of the …

Connected Water Heater Load Shifting And Energy Efficiency Evaluation For The Southeast: Winter Laboratory Assessment, Final Report, Florida Solar Energy Center, Karen Fenaughty

FSEC Energy Research Center®

The University of Central Florida's FSEC Energy Research Center (FSEC) and Pacific Northwest National Laboratory (PNNL) are conducting laboratory electrical load shifting experiments using the CTA-2045-A standard to demonstrate the viability of grid-connected heat pump water heaters (HPWH), compared to electric resistance water heaters (ERWH), in providing load shifting in the Southeastern United States (U.S.). The investigation applied different CTA-2045 shed and critical peak (CP) control command designs under two different water draw profiles. The highly-controlled laboratory experiments were conducted on four HPWHs and one ERWH from December 2020 through February 2021.

The research aimed to evaluate the load shifting …

Wetting Simulations Of High-Performance Polymer Resins On Carbon Surfaces As A Function Of Temperature Using Molecular Dynamics, Swapnil S. Bamane, Prashik S. Gaikwad, Matthew Radue, S. Gowtham, Gregory M. Odegard

Michigan Tech Publications, Part 1

Resin/reinforcement wetting is a key parameter in the manufacturing of carbon nanotube (CNT)-based composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. As experimental measurement of contact angle can be difficult when screening multiple high-performance resins with CNT materials such as CNT bundles or yarns, computational approaches are necessary to fa-cilitate CNT composite material design. A molecular dynamics simulation method is developed to predict the contact angle of high-performance polymer resins on CNT surfaces dominated by aromatic carbon, aliphatic carbon, or a mixture thereof (amorphous carbon). Several resin …

Identifying The Determinants And Extent Of Crop Diversification At Farm Level: A Case Study Of Uzbekistan, A.Э. Primov, M.H. Saidov, I. B. Rustamova, A.A. Abduvasikov

Irrigation and Melioration

Since independence, the government of Uzbekistan has implemented the number of agricultural policies such as making some crucial structural reforms at the farms, comprising different institutions and enhancing diversification of agricultural production in order to stabilize the agricultural sector of the country. Therefore, crop diversity has an important role in sustainable agriculture. We calculated the diversification index based on the Simpson Diversity Index method while ordinary least square (OLS) regression analysis was employed to assess the association of crop diversification on farm income using cross-sectional data from 381 farmers of Uzbekistan. The study revealed the mean computed Simpson Index values …

Control Of Change Of Phase Through Physical Surface Shaping, Troy Anderson, Sidy Ndao, Craig Zuhlke, Dennis Alexander, George Gogos

Department of Mechanical and Materials Engineering: Faculty Publications

A system embodiment includes , but is not limited to , a solid structure configure to contact each of a material in a liquid phase and a material in a vapor phase , the solid structure including a plurality of microstructures protruding at angles relative to a horizontal plane ; and a layer of nanoparticles positioned on the plurality of microstructures , the layer of nanoparticles having a composition that is at least one of a same material as the plurality of microstructures and an oxide of the same material as the plurality of microstructures , the plurality of microstructures …

Investigation Of Theoretical Scaling Laws Using Large Eddy Simulations For Airborne Spreading Of Viral Contagion From Sneezing And Coughing, K. Liu, M. Allahyari, J. Salinas, ‪Nadim Zgheib, S. Balachandar

Mechanical Engineering Faculty Publications

Using a set of large eddy point-particle simulations, we explore the fluid dynamics of an ejected puff resulting from a cough/sneeze. The ejection contains over 61 000 potentially virus-laden droplets at an injection Reynolds number of about 46 000, comparable to an actual cough/sneeze. We observe that global puff properties, such as centroid, puff volume, momentum, and buoyancy vary little across realizations. Other properties, such as maximum extent, shape, and edge velocity of the puff, may exhibit substantial variation. In many realizations, a portion of the puff splits off and advances along a random direction, while keeping airborne droplet nuclei …

Developing Algorithms For Automating The Processes Of Forming The Optimal Structural Composition Of Production - Technological Modules, Alisher Mamajanov, Sarvar Botir Ugli Nabiyev

Chemical Technology, Control and Management

In this research, we developed appropriate algorithms for the formation of the optimal structural composition of production - technological modules (PTM) based on the automation of the processes of determining and ensuring the functional-parametric compatibility (FPC) of their components. These algorithms are based on the developed mathematical models on the basis of the use of analytical methods for implementing the interconnection between the main components of the PTM.

Problem Solving Methods For Synthesis Of Physical Principles Of Mechatronic Module Operations In Intelligent Robotic Systems, Nazarov Khayriddin Nuritdinovich

Chemical Technology, Control and Management

The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered.

In addition, it deals with the specifics of the process of synthesis of the physical principles of the operation of mechatronic modules using predicate models, list models and information matrices of physical and technical effects.

It shows the interpretation of the components of the model of the system for the synthesis of the physical principles of operation of mechatronic modules of intelligent robotic systems and automatic control and the features of the synthesis algorithm for …

A State-Of-The-Art Review Of Laser-Assisted Bioprinting And Its Future Research Trends, Chaoran Dou, Victoria Perez, Jie Qu, Andrew Tsin, Ben Xu, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Bioprinting is an additive manufacturing technology with great potential in medical applications. Among available bioprinting techniques, laser-assisted bioprinting (LAB) is a promising technique due to its high resolution, high cell viability, and the capability to deposit high-viscousity bioink. These characteristics allow the LAB technology to control cells precisely to reconstruct living organs. Recent developments of LAB technologies are reviewed in this paper, covering various designs of LAB printers, research progresses in energy-absorbing layer (EAL), the physical phenomenon that triggers the printing process in terms of bubble formation and jet development, printing process parameters, and major factors related to the post-printing …

A Kinematic Error Controller For Real-Time Kinematic Error Correction Of Industrial Robots, Mitchell R. Woodside, Joseph Fischer, Patrick Bazzoli, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Industrial robots are being used more and more for manufacturing applications that require accuracy beyond what can be obtained from joint measurement. While offline calibration techniques such as volumetric error compensation can be used to correct robot kinematic error, these methods are unable to compensate for robot deformations caused by changing tool loads during the manufacturing operation. This paper explores the use of a real-time robot kinematic error compensation technique where an external high-precision feedback sensor (in this case a laser tracker) directly measures the robot kinematic error and corrections are implemented during processing. A robot kinematic error model is …

A Framework To Aid Decision Making For Smart Manufacturing Technologies In Small-And Medium-Sized Enterprises, Purvee Bhatia

USF Tampa Graduate Theses and Dissertations

The fourth industrial revolution or Industry 4.0 has changed today’s manufacturing scenario. The transition to smart manufacturing technologies has been evolving over the last few years and has recently accelerated due to the pandemic. The need to make manufacturing systems agile, adaptive, resilient, and robust has expediated the adoption and implementation of smart manufacturing technologies.

Despite the interest of manufacturers in smart manufacturing, the adoption rate has been slow due to the lack of decision-making tools that can provide a clear strategic roadmap for effective execution. Small and medium sized enterprises (SMEs) are especially slow in adoption due to the …

Mechanical Failure Of Metal/Ceramic Interfacial Regions Under Shear And Tensile Loading, Xiaoman Zhang

LSU Doctoral Dissertations

Quantitative assessment of the adhesion strength of ceramic hard coatings on substrates is a subject of great technological importance as well as current scientific relevance. Achievement of reliable and quantitative measurements of interfacial strength has proven difficult over the past two decades. In this dissertation, how the deformation and fracture behavior of ceramic/metal/substrate interfacial regions under shear and tensile loading is influenced by the structure and chemical composition of the interfacial region were observed and discussed. Interfacial shear failure experiments were carried out on focused ion beam fabricated micro pillars containing interfacial regions of ceramic/metal/substrate systems. Detailed characterization was carried …

Towards Semantic Integration Of Machine Vision Systems To Aid Manufacturing Event Understanding, Kaishu Xia, Clint Saidy, Max Kirkpatrick, Noble Anumbe, Amit Sheth, Ramy Harik

Publications

A manufacturing paradigm shift from conventional control pyramids to decentralized, service-oriented, and cyber-physical systems (CPSs) is taking place in today’s 4th industrial revolution. Generally accepted roles and implementation recipes of cyber systems are expected to be standardized in the future of manufacturing industry. The authors intend to develop a novel CPS-enabled control architecture that accommodates: (1) intelligent information systems involving domain knowledge, empirical model, and simulation; (2) fast and secured industrial communication networks; (3) cognitive automation by rapid signal analytics and machine learning (ML) based feature extraction; (4) interoperability between machine and human. Semantic integration of process indicators is fundamental …

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

Breaking The Acoustic Diffraction Limit With An Arbitrary Shape Acoustic Magnifying Lens, Ali Abdolali, Hooman Barati Sedeh, Mohammad Hosein Fakheri, Chen Shen, Fei Sun

Henry M. Rowan College of Engineering Departmental Research

Based on the transformation acoustics methodology, the design principle for achieving an arbitrary shape magnifying lens (ASML) is proposed. Contrary to the previous works, the presented ASML is competent of realizing far-field high resolution images and breaking the diffraction limit, regardless of the position of the utilized sources. Therefore, objects locating within the designed ASML can be properly resolved in the far-field region. It is shown that the obtained material through the theoretical investigations becomes an acoustic null medium (ANM), which has recently gained a significant attention. Besides the homogeneity of ANM, which makes it an implementable material, it is …

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

The Role Of Scenography In The Narration Of The Inner Space Of Contemporary Museums Through Employment The Space Staging, Shamael M. W. Al-Dabbagh, Dania Saleh Yaheia Al-Jaboury

Al-Esraa University College Journal for Engineering Sciences

In the recent period, several design mechanisms have emerged related to the design of internal spaces in architecture, specifically the museum spaces and associated with exhibitions, and the most important of these scenographic mechanisms are clearly and significantly adopted in the field of theater to design the stage and the scene that embodies the narrative vision and the idea of the theater director and scenographic designer to express what the text wants from Anecdotal expressing the objectives of the product of the text, therefore the research aimed to delve into the effect of the scenography mechanism on the contemporary architectural …

Evaluating The Performance Of The Jadriya Water Project For Water Treatment, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

For the purpose of evaluating the performance of the Al-Jadriya water project, water samples were taken before and after the sedimentation basins to find out the efficiency of the sedimentation ponds, as well as water samples were taken before and after the filtration basins, to know the efficiency of the filtration basins by conducting the following tests on them (Turbidity, TDS, TC, pH) to ensure that these ponds work properly. It was found that the efficiency rate of sedimentation ponds was 83%, which indicates the inefficiency of these ponds, as well as the inefficiency of the fast and slow mixing …

Possible Developments Of The Industrialization Of Appropriate Building Subsystem For Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

Industrialization of building has developed very rapidly in industrialized countries as well as in many other parts of the world to fulfill the need for housing and public buildings after the Second World War. Prefabricated building is defined as a type of building that consists of several elements or modular units prepared in advance and assembled on-site. The term prefabricated indicates that these building elements are manufactured in the workshop or factory and then combined with other elements. Iraq has witnessed vital development in the construction industry sector. The study investigates the appropriate technology for Iraq, considering resources, economy, labor, …

Ion Exchange Method For Sulphate Removal From Treated Wastewater Of Al-Doura Refinery, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

The treated wastewater by the industrial Wastewater Treatment Plant (WWTP), commonly named (INGECO) in Al-Doura refinery, suffers from highly sulfate concentrations that exceed the EPA specified limits of 250 mg/L. Laboratory water quality historical data have been reviewed and analyzed to determine the annual rate, maximum, and peak sulfate concentrations, which were found to be 360 mg/L, 425 mg/L, and 550 mg/L, respectively. A field inspection was conducted to identify the reasons for the high sulfate concentrations in the wastewater of most refinery process units. It was found that the maximum required sulfate remaining concentration should not exceed 10 mg/L …

Crack-Length Estimation For Structural Health Monitoring Using The High-Frequency Resonances Excited By The Energy Release During Fatigue-Crack Growth, Joseph Roshan, Hanfei Mei, Asaad Migot, Victor Giurgiutiu

Faculty Publications

Acoustic waves are widely used in structural health monitoring (SHM) for detecting fatigue cracking. The strain energy released when a fatigue crack advances has the effect of exciting acoustic waves, which travel through the structures and are picked up by the sensors. Piezoelectric wafer active sensors (PWAS) can effectively sense acoustic waves due to fatigue-crack growth. Conventional acoustic-wave passive SHM, which relies on counting the number of acoustic events, cannot precisely estimate the crack length. In the present research, a novel method for estimating the crack length was proposed based on the high-frequency resonances excited in the crack by the …

The Effect Of The Spirit Of The Place On The Formulation Of Emotion In Contemporary Arab-Islamic Architecture, Mahdi Saleh Al-Faraj, Dania Saleh Yaheia

Al-Esraa University College Journal for Engineering Sciences

Arab-Islamic architecture is characterized by both constants and variables, with spiritual aspects (content) representing the constants and physical aspects (form) representing the variables. It evolves based on changing times and needs, with compassion being a significant feature associated with its spiritual aspects. Compassion is essential for collective agreement and individual emotional connection in Arab-Islamic architecture. The present research aims to investigate the influence of the spirit of the place, as embraced by designers, on the emotional characteristics of contemporary Arab-Islamic architecture. The research problem identified is the lack of a theoretical concept regarding the impact of the spirit of the …