Mechanical Engineering Commons^™

Acoustic Tweezer With Complex Boundary-Free Trapping And Transport Channel Controlled By Shadow Waveguides., Junfei Li, Chen Shen, Tony Jun Huang, Steven A Cummer

Henry M. Rowan College of Engineering Departmental Research

Acoustic tweezers use ultrasound for contact-free, bio-compatible, and precise manipulation of particles from millimeter to submicrometer scale. In microfluidics, acoustic tweezers typically use an array of sources to create standing wave patterns that can trap and move objects in ways constrained by the limited complexity of the acoustic wave field. Here, we demonstrate spatially complex particle trapping and manipulation inside a boundary-free chamber using a single pair of sources and an engineered structure outside the chamber that we call a shadow waveguide. The shadow waveguide creates a tightly confined, spatially complex acoustic field inside the chamber without requiring any interior …

Attachment Of Fibrous Materials In Nature And Surgical Repair, Ethan Daniel Hoppe

McKelvey School of Engineering Graduate Student Theses & Dissertations

Mother nature is the ultimate problem solver. Often by brute force and necessity for survival, the organism that has the best solution to a problem is the one to proliferate. One of these problems for which nature provides an elegant solution is the attachment of dissimilar materials. This dissertation explores the strengthening and relaxation of interactions between soft and hard materials, typically with one of the two being fibrous in character, with the goal of identifying strategies for improving the surgical reattachment of tendon to bone. The work begins with a study of the plant Harpagonella palmeri, which the dissertation …

Investigation Of Microdroplet Generation, Morphological Evolution, And Applications Under Quasi-Steady And Dynamic States, Li Shan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Microscale droplets are commonly encountered in the fields of materials processing, thermal fluids, and biology. While these droplets are naturally occurring, recent advances in microfabrication have enabled researchers to harness their enhanced transport characteristics for numerous laboratory and industrial applications from controlled chemical synthesis to inkjet printing and thermal management. Smaller droplets have larger specific surface area and a greater perimeter-to-area ratio when resting on a surface (i.e., sessile), which accelerates processes occurring at droplet surfaces like evaporation, chemical reaction, or combustion. The demand for microdroplets with smaller and more uniform sizes has motivated investigation of how such droplets can …

Three-Dimensional Phase Field Modeling Of Fracture In Shape Memory Ceramics, Ehsan Moshkelgosha, Mahmood Mamivand

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Despite the vast applications of transformable ceramics, such as zirconia-based ceramics, in different areas from biomedical to aerospace, the fundamental knowledge about their mechanical degradation procedure is limited. The interaction of the phase transformation and crack growth is crucial as the essential underlying mechanism in fracture of these transformable ceramics, also known as shape memory ceramics. This study develops a three-dimensional (3D) multiphysics model that couples the variational formulation of brittle crack growth to the Ginzburg-Landau equations of martensitic transformation. We parameterized the model for the 3D single crystal zirconia, which experienced stress- and thermal-induced tetragonal to monoclinic transformation. The …

Synthesis And Biomedical Applications Of Functional Polymers, Jianxun Ding, Di Li, Jingxiao Chen, Chao Zhao, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications, Part 1

No abstract provided.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Mechanics Course Sequence Review Sessions (Statics, Dynamics, Mechanics, Machine Design)

Sound Trapping In An Open Resonator, Lujun Huang, Yan Kei Chiang, Sibo Huang, Chen Shen, Fu Deng, Yi Cheng, Bin Jia, Yong Li, David A. Powell, Andrey E. Miroshnichenko

Henry M. Rowan College of Engineering Departmental Research

The ability of sound energy confinement with high-quality factor resonance is of vital importance for acoustic devices requiring high intensity and hypersensitivity in biological ultrasonics, enhanced collimated sound emission (i.e. sound laser) and high-resolution sensing. However, structures reported so far have been experimentally demonstrated with a limited quality factor of acoustic resonances, up to several tens in an open resonator. The emergence of bound states in the continuum makes it possible to realize high quality factor acoustic modes. Here, we report the theoretical design and experimental demonstration of acoustic bound states in the continuum supported by a single open resonator. …

A Single Cell Pair Mechanical Interrogation Platform To Study Cell–Cell Adhesion Mechanics, Amir Monemianesfahani

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cell-cell adhesion complexes are macromolecular adhesive organelles that integrate cells into tissues. Perturbations of the cell-cell adhesion structure or relatedmechanotransduction pathways lead to pathological conditions such as skin and heart diseases, arthritis, and cancer. Mechanical stretching has been used to stimulate the mechanotransduction process originating from the cell-cell adhesion and cell-extracellular matrix (ECM) complexes. The current techniques, however, have limitations on their ability to measure the cell-cell adhesion force directly and quantitatively. These methods use a monolayer of cells, which makes it impossible to quantify the forces within a single cell-cell adhesion complex. Other methods using single cells or cell …

Analysis Of Liquefied Natural Gas (Lng) Systems With Innovative Waste Heat Recovery, Shisir Acharya

LSU New Orleans Theses and Dissertations

Due to the increase in energy needs all over the world, many nations do not have sufficient indigenous energy resources and have turned towards importing Liquefied Natural Gas (LNG). LNG production is an energy intensive process that produces a lot of wasted heat. The objective of this study is to review the current LNG processes and identify areas of improvement. To begin with, this study analyzes wasted energy recovery methods currently used in various power plants, followed by validation of the capability of the software, Thermoflex, against the published performance data of various power plants and corresponding gas cleanup processes. …

The Impact Of Alkali-Ion Intercalation On Redox Chemistry And Mechanical Deformations: Case Study On Intercalation Of Li, Na, And K Ions Into Fepo4 Cathode, Bertan Özdogru, Behrad Koohbor, O. Ozgur Capraz

Henry M. Rowan College of Engineering Departmental Research

Batteries made of charge carriers from Earth-crust abundant materials (e.g., Na, K, and Mg) have received extensive attention as an alternative to Li-ion batteries for grid storage. However, a lack of understanding of the behavior of these larger ions in the electrode materials hinders the development of electrode structures suitable for these large ions. In this study, we investigate the impact of alkali ions (Li, Na, and K) on the redox chemistry and mechanical deformations of iron phosphate composite cathodes by using electrochemical techniques and in situ digital image correlation. Na-ion and Li-ion intercalation demonstrate a nearly linear correlation between …

Geometrically Complex Planar Heat Exchangers, Derli Dias Do Amaral Junior, Jose Lage

Mechanical Engineering Research Theses and Dissertations

In this study, geometrically complex planar heat exchangers, designed in line with the Constructal Law and operating at steady-state, are investigated numerically. The work is divided into two parts, one focusing on diffusion heat transfer in a rectangular plane and another on conjugate diffusion-convection heat transfer in a circular plane heat exchanger.

In the first part, a heat generating rectangular solid volume made of a low conductivity material is cooled through a small, isothermal side-section of the domain. The diffusion cooling process is improved by distributing within the heat generating material a fixed amount of a high conductivity material. The …

Forced Convection Film Condensation Of Downward-Flowing Vapor On Horizontal Tube With Wall Suction Effect, Tong-Bou Chang, Fu-Jen Wang

Journal of Marine Science and Technology–Taiwan

The heat transfer performance of the condensate layer formed by a downward-flowing, dry saturated vapor flowing over an isothermal horizontal tube with wall suction effects is examined. Under the effects of wall suction, the gravity force, the potential flow pressure gradient, and the interfacial shear stress, the local/mean Nusselt numbers of the condensate film are obtained as a function of the Jakob number Ja, the Prandtl number Pr, the Rayleigh number Ra, the two-phase mean Reynolds number Rev, the dimensionless pressure gradient parameter P, and the suction parameter Sw. The results show that the mean Nusselt number increases with increasing …

An Examination Of The Influence Of Distillation On The Combustion Behavior Of Apparently Equivalent Surrogate Fuels, Jay A. Lefkowitz

Theses and Dissertations

Use of surrogates to emulate the combustion behaviors of prevaporized real fuels has been widely demonstrated in the literature. However, many combustion applications utilize atomized fuel sprays, and for these configurations, the assumption of fuel property homogeneity in prevaporized fuel combustion is tenuous. This work uses a simplified distilling droplet model to demonstrate a real potential for vaporization-coupled deviations from the single-valued combustion property targets used to characterize prevaporized combustion behaviors. To verify the model-based observations, flame blowout measurements from a custom-built annular spray burner rig are measured. Sets of essentially equivalent prevaporized jet fuel and gasoline surrogates suggested in …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Department Hosts Summer Camp for HS Students

Comparison Of Concrete And Steel Jacket Methods For Reinforcing A Concrete Bridge Pier By Numerical And Experimental Studies, Hadi Faghihmaleki

Makara Journal of Technology

Various rehabilitation and strengthening procedures have been developed in recent decades. A study to determine which methods can be implemented to increase the useful life of the bridge before strengthening must be performed. In this study, the seismic behavior of a reinforced concrete bridge pier with dimension 3.5 × 3.5 m, which was reinforced by two steel and a concrete jacket, was investigated. Nonlinear geometric models and materials were analyzed to estimate the seismic parameters of the pier. Results show an increase in energy absorption, ultimate strength, and ductility for the steel jacket, as well as a greater increase in …

Effect Of Arc Plasma Sintering On The Structural And Microstructural Properties Of Fe-Cr-Ni Austenitic Stainless Steels, Parikin Parikin, M. Dani, A. Dimyati, N. D. Purnamasari, B. Sugeng, M. Panitra, A. Insani, T. H. Priyanto, S. Mustofa, Syahbuddin Syahbuddin, A. Huang

Makara Journal of Technology

X-ray diffraction techniques were performed to determine the actual crystal structure of A2 austenitic stainless steel (ASS) as-cast and A2 ASS after arc plasma sintering (APS) for 2 s. Computations were conducted on the basis of the Bragg arithmetic formula by comparing the S2 arithmetic with the interplanar spacing. The Bragg arithmetic formula is a simple series for the determination of the crystalline phase of materials based on the Miller indices of cubic shapes or other shapes. A2 ASS as-cast was identified to have a crystal structure of face-centered cubic with lattice parameter a = 3.58 Å. A similar crystal …

Trend Significance Levels Of Rain Onset And Cessation And Lengths Of The Wet And Dry Seasons In Epe, Lagos State, Nigeria, Adekunle Adedeji Alli, Olorunwa Eric Omofunmi

Makara Journal of Technology

This study aims to reduce crop failure resulting from a dry spell, which is the first occurrence of unsustainable rainfall that deceives farmers into planting. Thus, trends need to be tested using hypothesis, kurtosis, and other statistics to analyze the risks associated with unstable planting calendars and their possible mitigation strategies. The daily rainfall data from 1982 to 2018 were obtained from the archive of NASA/POWER SRB/FLASH, and the research location is Epe, Lagos State, Nigeria, which lies at latitude 6.585° N and longitude 3.962° E. Microsoft Excel was used to perform the tests. Results show that the null hypothesis …

Kinetic Modeling Study Of Laminar Burning Velocity Of Gasoline–Ethanol–Methanol Blends At Elevated Temperature And Pressure, Ahmad Syihan Auzani, Cahyo Setyo Wibowo, Riesta Anggarani, Yulianto Sulistyo Nugroho, Bambang Sugiarto

Makara Journal of Technology

Gasoline–ethanol–methanol (GEM) blends have been considered to replace pure gasoline as spark ignition engine fuel. Their physical and chemical properties and performance and emission measurements from real engines have been reported previously. However, a fundamental study that can explain the unique results of GEM compared with those of pure gasoline is lacking. This study aims to compare the laminar burning velocity of GEM blends at different mixtures, equivalence ratios, temperatures, and pressures with that of pure gasoline. A laminar flame propagation model and reaction mechanisms from the literature were were for a numerical simulation. In this study, the chemical components …

Improvement Of Electrical Properties Of Cmc-Pva Doped With Various Contents Of Lino3 As An Application For Hybrid Polymer Electrolytes, Amalia Zulkifli, Norfatihah Mazuki, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried out with the development of hybrid polymer electrolytes (HPEs) by using carboxymethyl cellulose (CMC)–polyvinyl alcohol (PVA) doped with different contents of lithium nitrate (LiNO3) for the determination of their structural and conduction properties. The structural analysis was conducted by using Fourier transform infra-red spectroscopy and showed the interaction between the blend host polymer and ionic dopant, which formed via the coordinating site of CMC-PVA and Li+-NO3−. The complexes of CMC-PVA doped LiNO3 led to an increment in ionic conductivity, as observed by electrical impedance spectroscopy, and the sample containing 20 wt% LiNO3 obtained the highest …

Music Information Retrieval Based On Active Frequency, Hardianto Wibowo, Wildan Suharso, Yufis Azhar, Galih Wasis Wicaksono, Agus Eko Minarno, Dani Harmanto

Makara Journal of Technology

Music is the art of combining frequencies. A balance of frequencies gives rise to a harmonious tone. Several features of music can be analyzed, and they include sociocultural background, lyrics, mood, tempo, rhythm, harmony, melody, timbre, and instrumentation. In this study, we use the frequency of instrumentation as a feature for classification because each instrument has a frequency range. To test this frequency range, we use five music genres and one music playing skill. The five genres are dangdut, electronic dance music (EDM), metal, pop/rock, and reggae. The music playing skill is acoustic. Active frequencies are tested using the k-nearest …

Predictive Delivery Man Assignment Problem Using Deep Learning, Rahmadini Payla Juarsa, Taufik Djatna

Makara Journal of Technology

Dispatching is a critical part in current online shopping. It relates to how the delivery man assignment should minimize cost along with the service from a source to an end customer with an appropriate scheduled time. The problem arises as neither enough products to deliver nor delivery men are available for dispatch, resulting in suboptimal service and a waste of money. The study aimed to formulate the cost of restaurant dispatching for inducing a deep learning-based solution with the gated recurrent unit recurrent neural network to receive hourly order data and to engage the result for near feature delivery man …

An Engineer's Guide To Periodic Discrete Wavelet Transforms And The Periodic Wavelet Balance Method, Simon Jones

Faculty Publications - Mechanical Engineering

This Technical Report aims to explain how to apply the discreteWavelet Balance Method (dWBM) for solving periodic differential equations using periodized Daubechies wavelets. The primary goal is to provide the user sufficient details to implement the technique without extensive mathematical background.

Chapter 2 of this document reviews the discrete Fourier transform using a multivariate regression approach, followed by a review of the discrete Harmonic Balance Method (dHBM) for approximating solutions to periodic differential equations. It is important the reader complete this chapter, even if they are familiar with the topics, since the approaches demonstrated in Chapter 2 with harmonic functions …

Effect Of Temperature On Abrasion Erosion In Particle Based Concentrating Solar Powerplants, Nipun Goel, Tessa Mei-Lin Fong, John P. Shingledecker, Andrew Russell, Michael W. Keller, Siamack A. Shirazi, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The use of solid particles as a heat transfer medium is being explored for concentrated solar power plants (CSP) to increase their efficiency by achieving operating temperature >700 °C. During operation, these hot particles are expected to move along the various components within the collector system, resulting in material degradation from a combination of high-temperature oxidation and erosion. In the present study, the performance of candidate materials was evaluated through a series of abrasion erosion experiments at room temperature as well as at 800 °C. Wear in metallic and refractory type materials was investigated using CarboBead® HSP 40/70 particles inside …

Stress Analysis Of Functionally Graded Materials, Nilabh Krishna

Mechanical and Aerospace Engineering Dissertations - Archive

A functionally graded material (FGM) is an inhomogeneous material whose material properties vary continuously. Since FGM’s material properties are continuous at the interface of the two materials, unlike conventional composites whose material properties are discontinuous at the interface, it is best suited to prevent catastrophically failure, stress concentration, and residual stresses. Literature reviews revealed that most of the research on FGMs was a 2-D analysis, especially on FGM plates and beams. This research focuses on 3-D stress analysis for an elastic medium that contains a spherical inclusion made of an FGM embedded in a matrix phase. To the best of …

Effect Of Thermal Conductivity, Reynolds Number, Aspect Ratio And Packing Arrangement On Radial Heat Transfer In Packed Beds, Nishith Gorla

Mechanical and Aerospace Engineering Dissertations - Archive

The key motivation for this research is to study heat transfer developments in packed beds. The radial heat transfer enhancement of a packed bed in the laminar flow region is one of the major areas of ongoing research in mechanical, aerospace and chemical industries, especially the response of a packed bed during conjugate heat transfer with the fluid-solid interaction. This computational study focuses on the impact of packing size, thermal conductivity, and arrangement on the radial heat transfer performance as a function of Reynolds number. A simple annular tube packed with circles (2D) and spheres (3D) is utilized for this …

Modeling The Effect Of In Situ Nozzle-Integrated Compression Rolling On The Mechanical And Fracture Behavior Of Fused Filament Fabrication (Fff) 3d Printed Parts, Momen Mohammad Qasaimeh

Mechanical and Aerospace Engineering Dissertations - Archive

Fused filament fabrication (FFF) is one of the most common additive manufacturing/3D printing techniques where continuously extruded semi-molten filaments are deposited in a layer-by-layer manner. The quality of the manufactured part depends on some major factors such as filament-filament contact and adhesion as well as the void fraction. Filament to filament adhesion affects the part strength under transverse load. In our earlier work, we studied the effect of in situ ball rolling on the thermal and mechanical properties of the printed parts. It was found that when printing/rolling parameters are correctly tuned and in situ compression rolling is appropriately applied …

Set-Theoretic Frameworks For Online Optimization, Estimation, And Control, Dignata Bhattacharjee

Mechanical and Aerospace Engineering Dissertations - Archive

This research is primarily focused on developing online frameworks, which are suited to real-time implementation, for performance optimization, estimation, and control of dynamical systems using set-theoretic concepts and/or having set-theoretic interpretations. First, two perturbation-based extremum seeking control schemes, based on the classical setup and equipped with novel adaptation laws for the perturbation signal amplitudes, are proposed for general single input single output nonlinear systems. The proposed schemes are able to extremize steady-state system output in a practical asymptotic sense, i.e., the system is driven to an arbitrarily small set centered at the true steady-state optimal operating point. The next development …

Uncertainty Propagation, Control, And Estimation Of Stochastic Dynamic Systems Using Generalized Polynomial Chaos Expansion, Rajnish Bhusal

Mechanical and Aerospace Engineering Dissertations - Archive

In recent years, uncertainty propagation has emerged as an important research area in the field of dynamical systems. The growing interest in this area arises out of the need to develop computationally efficient approaches to predict the evolution of a system subject to uncertainties. To this end, this dissertation is focused on developing computational frameworks for uncertainty propagation, control, and state estimation of stochastic dynamical systems using the generalized polynomial chaos (gPC) expansion technique. In the first part of this dissertation, the construction of gPC expansion is presented in general. The novelty of this dissertation lies in developing a mixed …

Computational Investigation Of Energy Dissipation Through Progressive Failure In Tailored Composite Structures Via Explicit Finite Element Analysis, Anirudh Srinivas

Mechanical and Aerospace Engineering Dissertations - Archive

In this study, energy dissipation in structures implementing a previously developed, analytically modeled, and experimentally validated composite tailoring concept is investigated using an explicit finite element approach. The tailored composite structures consist in a series connection of parallel alternate load paths of tailored length and thickness. The advantage of the tailored structure when compared to an untailored conventional structure is that when subjected to a tensile load, the response of the tailored composite structure is characterized by progressive failure of the load paths resulting in increased energy dissipation. The tailored composite structure is modeled for IM7-8552 composite material using a …

Laminar Swept And Cross Shockwave/Boundary-Layer Interactions, Jiss Jacob Sebastian

Mechanical and Aerospace Engineering Dissertations - Archive

Shockwave/boundary-layer interactions are considered one of the most complex problems in high-speed gas dynamics, and numerous studies have been carried out for more than eighty years to understand the fundamental physics. A numerical study was performed using fin-plate configurations to study the three-dimensional swept and cross shockwave/ laminar boundary-layer interactions. All the interactions studied were strong enough for the boundary layer to separate. In the first part, swept shock interactions between a laminar boundary layer and the shockwave induced by a sharp fin mounted perpendicularly on a flat plate were studied. Different flow conditions were investigated at freestream Mach numbers …