Mechanical Engineering Commons^™

Anisotropy In Impact Toughness Of Powder Bed Fused Aisi 304l Stainless Steel, Sreekar Karnati, Atoosa Khiabhani, Aaron Flood, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The current effort involved investigation into the anisotropy of AISI 304L fabricated through laser powder bed fusion. Charpy V‐notch specimens made from material fabricated at three different build orientations were tested and analyzed. A statistically significant difference among the toughness values indicates the presence of anisotropy within the additively manufactured material. While the lowest toughness was found in vertically built specimens, the horizontal specimens were found to exhibit the highest toughness. From the fracture surfaces, an atypical mode of failure was observed. Exclusive crack propagation along the interlayer track boundaries was observed. The toughness variation correlated with the ease of …

Anomaly Detection And Failure Prediction In Gas Turbines, Vipul Goyal

Electronic Theses and Dissertations, 2020-2023

This study is based on time-series data taken from the combined cycle heavy-duty utility gas turbines. For analysis, first, a multi-stage vector autoregressive model is constructed for the nominal operation of powerplant assuming sparsity in the association among variables, and this model is used as a basis for anomaly detection and prediction. This prediction is compared with the time-series data of the powerplant test data containing anomalies. Granger causality networks, which are based on the associations between the time series streams, can be learned as an important implication from the vector autoregressive modelling. This method suffers from the disadvantage that …

Medial And Lateral Tibiofemoral Contact Forces For Individuals With High Body Mass Index In Gait And Cycling Training, Reymil Fernandez

Master's Theses

The prevalence of knee osteoarthritis, a degenerative joint disease characterized by the degradation of articular cartilage, is correlated with the rise in obesity. The rising rates of obesity in children and adults highlight the need for identifying a sustainable physical activity that promotes fitness while mitigating initiation and progression of osteoarthritis. The objective of this study was to determine an effective rehabilitation and lifelong fitness sustainment exercise regimen that minimize risk of osteoarthritis in individuals with high body mass index (BMI). The aim was to examine knee medial and lateral contact forces in gait and cycling training. Gait at self-selected …

Triangular Cosserat Point Element Method For Reducing Soft Tissue Artifact: Validation And Application To Gait, Jake Edward Deschamps, Stephen Klisch

Master's Theses

Human motion capture technology is a powerful tool for advancing the understanding of human motion biomechanics (Andriacchi and Alexander, 2000). This is most readily accomplished by applying retroreflective markers to a participant’s skin and tracking the position of the markers during motion. Skin and adipose tissue move independently of the underlying bone during motion creating error known as soft tissue artifact (STA), the primary source of error in human motion capture (Leardini et al., 2005).

(Solav et al., 2014) proposed and (Solav et al., 2015) expanded the triangular Cosserat point element (TCPE) method to reduce the effect of STA on …

Printed Circuit Board Design And Layout For Hobbyists, Engineers, And Students, Michael A. Derrenbacher

Master's Theses

Printed Circuit Boards (PCBs) are a ubiquitous element of virtually every electronic system manufactured world-wide. It is not a stretch of the imagination to say that if it’s electronic, there is a PCB in it. PCBs are necessary tools for electronics work, and tools need to have instructions. For better or worse, PCB knowledge is a deep and wide ocean. There is much to cover for even a surface level understanding, and there are deep areas rich in technical expertise. Navigating the ocean of knowledge is treacherous; common knowledge of yore can be downright dubious now. PCB manufacturing and electronics …

Injection Studies On A Small-Scale Rotating Detonation Engine With Improved Flow Control, Jonathan J. Wyatt

Theses and Dissertations

The Rotating Detonation Engine (RDE) has gained increasing attention in recent years for its potential advantages over typical deflagration combustion. A Micro-RDE design with an outer diameter of 28mm operating on Nitrous Oxide and Ethylene was recently developed, which stretched the limits of small-scale detonation engines. The testing on this rig has shown a stable one wave mode detonation with frequencies reaching 16.8 kHz. Key parameters that influence the detonation wave mode are cell size, fill height, and wave speed, which are heavily influence d by injection schemes. Previous testing utilized a partially premixed jets in crossflow (JIC) injection scheme, …

Tunable Compressive Mechanical Behavior Of Ice-Templated Materials, Sashanka Akurati

Mechanical & Aerospace Engineering Theses & Dissertations

The inherent hierarchical microstructural organization in natural materials is responsible for their excellent mechanical properties beyond that predicted by the simple rule-of-mixtures. Further exhibit synergy between strength and toughness, otherwise mutually exclusive in brittle materials. Conventional processing methods are unable to replicate hierarchical microstructures in engineering ceramics akin to that observed in natural materials. Ice-templating has emerged as a potential technique to fabricate bioinspired hierarchical materials. This process involves simultaneous unidirectional solidification and phase segregation of aqueous suspensions. Ice-templated porous ceramic materials have received significant attention for overcoming several limitations of conventional ceramic foams currently used in numerous engineering applications. …

Supercritical Co2 Recompression Closed Brayton Cycle Analysis, Andres Eduardo Gutierrez Hernandez

Open Access Theses & Dissertations

On this research, the results of an analysis made of a Supercritical Carbon Dioxide (sCO2) Recuperated Closed Brayton Cycle (RCBC) done by performing theorical calculations and comparing it to the results obtained with the use of the software ASPEN Plus will be presented. To demonstrate and determine that this software is a useful tool for modeling the proposed type of cycle, a preliminary comparison was made to verify with previous studies found in literature. A comparison and analysis between the possible working fluids and thermal energy sources was also performed to emphasize the decision of using CO2 as the cycle …

Gasification Based Waste Tire Integrated Energy Conversion Systems, Karah Powell

Honors Theses

The objective of this study was to evaluate the operating parameters impacts on the performance of a gasification-based waste tire integrated energy conversion system. In this system, the waste tires are put into a downdraft gasifier that is providing fuel for a solid oxide fuel cell (SOFC). The system is evaluated by the syngas production, power generation, and overall efficiency under various operating conditions. A hybrid 1-D model was adopted to perform a parametric study of the tire gasification and calculations were done to estimate the integrated system power generation and overall efficiency using MATLAB. Three parameters were studied: the …

Second-Order Reliability Methods: A Review And Comparative Study, Zhangli Hu, Rami Mansour, Mårten Olsson, Xiaoping Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Second-order reliability methods are commonly used for the computation of reliability, defined as the probability of satisfying an intended function in the presence of uncertainties. These methods can achieve highly accurate reliability predictions owing to a second-order approximation of the limit-state function around the Most Probable Point of failure. Although numerous formulations have been developed, the lack of full-scale comparative studies has led to a dubiety regarding the selection of a suitable method for a specific reliability analysis problem. In this study, the performance of commonly used second-order reliability methods is assessed based on the problem scale, curvatures at the …

Fabrication Of Alloy 625 Through Electron Beam Powder Bed Fusion Additive Manufacturing, Characterization And Mechanical Performance, Aldo Rubio Hidalgo

Open Access Theses & Dissertations

Electron Beam Powder Bed Fusion (EB-PBF) is an additive manufacturing process that allows for the fabrication of nearly fully dense Alloy 625 parts. In this study EB-PBF Alloy 625 samples were fabricated in an Arcam A2X, heat-treated, then machined and tensile tested. Preliminary process tests varying focus offset, and speed function were conducted to establish baseline process parameter conditions to fabricate Alloy 625 parts based on surface finish and structural defects. The microstructure observed in EB-PBF Alloy 625 parts along the build direction in the as-built state consists of irregularly sized columnar grains averaging 105 μm in width that have …

Identification Of Phosphorous Loading Point Source Facilities To 303(D) Listed Nutrient Impaired Waters Through Watershed Delineation Using Arcgis For Life Cycle Assessment Applications, John Zimmerman

Chemical Engineering Undergraduate Honors Theses

The work done for this project is part of a larger “life cycle assessment (LCA) of novel electrochemical phosphorus recovery technology at the wastewater treatment plant and U.S. watershed scales” (Morrissey 2019). The goal of that LCA is to determine “environmental impacts of implementing electrochemical struvite recovery at the wastewater treatment plant, U.S watershed, and global scales” (Morrissey 2019). This project’s goal is to identify locations deemed more sensitive to eutrophication impacts. The results will be used as part of the life cycle inventory (LCI) accounting for geographically explicit phosphorus flows. The waters identified as impaired were sourced from the …

Accelerated Performance Degradation Of Single-Phase Cold Plates For Direct-To-Chip Liquid Cooled Data Centers, Lochan Sai Reddy Chinthaparthy

Mechanical and Aerospace Engineering Theses - Archive

Expanding demands for cloud-based computing and storage, the Internet of Things, and AI-based applications have escalated thermal loads in high-density data centers which necessitated the utilization of more efficient cooling technologies. Direct-to-chip liquid cooling using cold plates has proven to be one of the most efficient methods to dissipate the high heat fluxes of modern high-power CPUs and GPUs. While the published literature has well-documented research on the thermal aspects of direct liquid cooling, a detailed account of reliability degradation is missing. The present investigation provides an in-depth analysis of the reliability degradation of copper cold plates used in high-power …

Tailoring Of The Left Ventricular Assist Device Cannula Implantation Using Coupled Multi-Scale Multi-Objective Patient Specific Optimization., Abubakar Dankano

Electronic Theses and Dissertations, 2020-2023

Despite advancements in device design and anti-coagulation treatments, there are numerous adverse events that may occur following implantation of LVADs. The most devastating involves the embolization of thrombus into the brain causing a stroke, with incidence of up to 14-47% over a 6–12-month period. This study aims to elucidate ways to reduce this risk by surgical maneuvers guided by a multi-scale computational fluid dynamics analysis wrapped around a multi-objective shape optimization scheme which optimizes the anastomosis location of the VAD outflow graft (OG) along the ascending aorta to minimize the incidence of thrombi reaching the cerebral vessels and reduce particle …

Topology Optimization Of Internal Cooling Channels In Turbulent Flows, Shinjan Ghosh

Electronic Theses and Dissertations, 2020-2023

Topology optimization, introduced by Bendsoe and Sigmund in 1988 has been a topic of research in the structural mechanics field for several decades. This technique is commonly used to optimize system performance of structural components with minimum material usage by varying the distribution of materials in a given domain. Fluid dynamic topology optimization, a relatively new research topic uses a method of adding or subtracting materials to a given flow domain to obtain an optimal flow-path for a given objective function. While the structural TO creates a solid structure by introducing holes into the domain, fluid TO introduces solid into …

Development And Application Of A Digital Twin For Chiller Plant Performance Assessment, Mihir Kale

All Theses

As the complexity of industrial equipment continues to increase, the management of the individual machines and integrated operations becomes difficult without computer tools. The availability of streaming data from manufacturing floors, plant operations, and deployed fleets can be overwhelming to analyze, although it provides opportunities to improve performance. The use of dedicated monitoring systems in the plant and field to troubleshoot machinery can be integrated within a product lifecycle management (PLM) architecture to offer greater features. PLM offers virtual processes and software tools for the design, analysis, monitoring, and support of engineering systems and products. Within this paradigm, a digital …

Autonomous Guidance Of Unmanned Combat Air Vehicles In Basic Fighter Maneuvering, Jeffery G. Dean

Mechanical and Aerospace Engineering Dissertations - Archive

Basic fighter maneuvering, or BFM, is the dynamic engagement of two or more aircraft in close-range air combat. The relatively recent introduction of advanced unmanned combat air vehicles (UCAVs) has opened the possibility for automated systems to be players in this arena of air-to-air combat, which has thus far been limited to manned aircraft. In order to design an unmanned system that could fight and win a BFM engagement, the system must include an advanced system for guidance. This dissertation leverages techniques from gain scheduling and incorporates adjustable aimpoint guidance, in order to address the capability for UCAVs to execute …

Sensing Small Interaction Forces Through Proprioception, Fazlur Rashid, Devin Michael Burns, Yun Seong Song

Psychological Science Faculty Research & Creative Works

Understanding the human motor control strategy during physical interaction tasks is crucial for developing future robots for physical human-robot interaction (pHRI). In physical human-human interaction (pHHI), small interaction forces are known to convey their intent between the partners for effective motor communication. The aim of this work is to investigate what affects the human's sensitivity to the externally applied interaction forces. The hypothesis is that one way the small interaction forces are sensed is through the movement of the arm and the resulting proprioceptive signals. A pHRI setup was used to provide small interaction forces to the hand of seated …

A Machine Learning Method For The Prediction Of Melt Pool Geometries Created By Laser Powder Bed Fusion, Jonathan Ciaccio

LSU New Orleans Theses and Dissertations

A machine learning model is created to predict melt pool geometries of Ti-6Al-4V alloy created by the laser powder bed fusion process. Data is collected through an extensive literature survey, using results from both experiments and CFD modeling. The model focuses on five key input parameters that influence melt pool geometries: laser power, scanning speed, spot size, powder density, and powder layer thickness. The two outputs of the model are melt pool width and melt pool depth. The model is trained and tested by using the k fold cross validation technique. Multiple regression models are then applied to find the …

Silver Microparticle And Submicron Wire - Polylactic Acid Composites For Additive Manufacturing, Jenna W. Robichaux

LSU New Orleans Theses and Dissertations

This thesis explores the incorporation of silver microparticle and submicron wire additives into thermoplastic filament feedstock for fused filament fabrication (FFF) to create multifunctional three-dimensional (3D) printable composites. The impact of silver microparticle and submicron wire additives on mechanical behavior along with antibacterial effect of the silver microparticle and submicron wire additives on printed objects were assessed.

Composite FFF filaments were fabricated by solution processing, granulation, and extrusion. Differential Scanning Calorimetry (DSC) was conducted to measure the glass transition and melting point temperatures of the composite filaments for 3D printing. The effect of the additive addition on the thermal properties …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …

Gaf Fiberglass Mat Slitter Blade Sharpener, Mark D. Breaux, Bradley M. Smith, Esteban Carrillo, Carlos Espinoza

Mechanical Engineering

This document contains an overview for the offline slitter blade sharpening system created for GAF to sharpen their current cutting tools in a timely and safe manner without hindering the timeline and production of their assembly line. This design was developed by four undergraduate students at from Cal Poly, San Luis Obispo. This document first investigates background information of any patents, current sharpening device, sharpening safety standards, or literature review that may be useful in a sharpening mechanism device. This document also contains our design concept prototype, which consists of three main features, the use of a top guard for …

Produce Sorting Aid, Annica Navarro, Jessie Boucher, Natalie Roberts, Teng Lee

Mechanical Engineering

This Final Design Review (FDR) document intends to define the details of the Produce Sorting Aid senior project–selected by four mechanical engineering students, working under the team name Team W24. The Alameda County Community Foodbank (ACCFB) sorts bulk produce into bags or boxes for distribution to people in need of food. However, the current process is not ergonomic, time efficient, or safe for the volunteers at the ACCFB. The scope of the senior project is to design a mechanism that is ergonomic, time efficient, and safe for the volunteers to lift heavy produce and distribute the produce into bags ready …

Numerical And Experimental Study Of Machining Process Of High Strength Lightweight Materials, Chao Zhang

All Dissertations

No abstract provided.

Microstructure And Mechanical Properties Of Cast And Hot-Rolled Medium-Carbon Steels Under Isothermal Heat-Treatment Conditions, Byungsue Shin, Kwangyuk Kim, Sung Yi, Sanggyu Choi, Soongkeun Hyun

Mechanical and Materials Engineering Faculty Publications and Presentations

In this study, the changes in the microstructure and mechanical properties during isothermal heat treatment of cast steel before and after hot deformation were investigated using medium carbon steel with low alloy content. The microstructural characteristics of the cast and hot-rolled medium-carbon steel under isothermal heat-treatment conditions were examined using optical microscopy and scanning electron microscopy in conjunction with electron backscatter diffraction. The variation in the mechanical properties was evaluated using Rockwell hardness and tensile tests. After maintaining an austenitizing condition at 1200 ◦C for 30 min, an isothermal heat treatment was performed in the range 350–500 ◦C, followed by …

Additive Manufacturing Using Robotic Manipulators, Fdm, And Aerosol Jet Printers., Alexander Curry

Electronic Theses and Dissertations

Additive manufacturing has created countless new opportunities for fabrication of devices in the past few years. Advances in additive manufacturing continue to change the way that many devices are fabricated by simplifying processes and often lowering cost. Fused deposition modeling (FDM) is the most common form of 3D printing. It is a well-developed process that can print various plastic materials into three-dimensional structures. This technology is used in a lot of industries for rapid prototyping and sometimes small batch manufacturing. It is very inexpensive, and a prototype can be created in a few hours, rather than days. This is useful …

An Investigation Into Energy-Material Properties Interaction In Additive Manufacturing Of Polymers., Pu Han

Electronic Theses and Dissertations

Additive manufacturing (AM), known as three-dimensional (3D) printing, is a fabrication process to build 3D objects layer by layer based on computer aided design (CAD) model or digital 3D model. Fused filament fabrication (FFF) has become a preferred method for additive manufacturing due to its cost-effectiveness and flexibility. However, the parts built using FFF process suffer from lower mechanical strength compared to that fabricated using traditional method and rough surface finish. With this motivation, this dissertation aims to develop and implement a novel in-process laser assisted technique on FFF to heal the microstructure of FFF built objects by enhancing reptation …

Estimating Smart Wi-Fi Thermostat-Enabled Thermal Comfort Control Savings For Any Residence, Abdulelah D. Alhamayani, Qiancheng Sun, Kevin Hallinan

Mechanical and Aerospace Engineering Faculty Publications

Nowadays, most indoor cooling control strategies are based solely on the dry-bulb temperature, which is not close to a guarantee of thermal comfort of occupants. Prior research has shown cooling energy savings from use of a thermal comfort control methodology ranging from 10 to 85%. The present research advances prior research to enable thermal comfort control in residential buildings using a smart Wi-Fi thermostat. "Fanger's Predicted Mean Vote model" is used to define thermal comfort. A machine learning model leveraging historical smart Wi-Fi thermostat data and outdoor temperature is trained to predict indoor temperature. A Long Short-Term-Memory neural network algorithm …

Synthesis And Assessment Of Sustainable Fuels For Transportation And Space Exploration, Katerina Chagoya

Electronic Theses and Dissertations, 2020-2023

As global energy sources transition towards renewable energy, the demand for sustainable fuels has never been greater. The sheer scale of this transition will require numerous solutions to accommodate for the diverse and complex situations worldwide. This dissertation will discuss 3 studies: the utilization of CO2 waste gas to produce fuels sustainably, characterizing biofuels for efficient use in automobiles, and developing a solid, emissonless fuel intended for spaceflight but also applicable on Earth. The hydrogenation of CO2 into value-added molecules could reduce greenhouse gas emissions if waste stream CO2 were captured for conversion. We found that atomic vacancies induced in …

Synthesize And Characterization Of Aluminum- Tungsten Carbide Nanocomposite, Shuvendu Das

Theses and Dissertations

This research focuses on developing metal matrix composite reinforced by polymer-derived ceramic fibers. The force-spun AMT nanofibers were heat treated into tungsten carbide and then mixed with aluminum powder using cold pressing and sintering to produce the composites. The basic mechanical properties of this composite are investigated by density measurement, hardness and compression testing. SEM, EDS and XRD were used to test the morphology of tungsten carbide fibers. EDS identified a near-perfect W-C ratio in tungsten carbide fibers 1000 °C. Tungsten Carbide fibers were crushed using ball milling technique. Tungsten carbide nanofibers powder had a variety of particle size. Results …