Mechanical Engineering Commons^™

Engineering Instruction, Inclusion, And Comics: Reflections From A Student Illustrator And An Instructor, Addison Totman, Sreyoshi Bhaduri, Krishna Pakala, Cherie D. Edwards, Michelle Soledad

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper presents the opportunity gap for comics in engineering education, through reflections from a team redesigning a mechanical engineering syllabi using illustrations. To increase a sense of belonging among diverse students, the authors of this paper propose a graphic narrative focused on the curriculum of the mechanical engineering department at a large public university in Western United States. We hope that this paper addresses the underutilized and largely missed opportunity to add engagement, better conceptual understanding, and improve inclusion in engineering classrooms through incorporating visual illustrations.

Work-In-Progress: Mobile Assisted Gains Through Innovative Curriculum For Students In The Thermal-Fluids Science Course, Maeve Bakic, Krishna Pakala, Diana Bairaktarova, Devshikha Bose

Mechanical and Biomedical Engineering Faculty Publications and Presentations

A learner-centered higher education ecosystem is essential to effective educational outcomes and societal advancement. Mobile devices such as smartphones, tablets, and tablet computers enable learning anytime and from any location, blurring the boundaries between formal and informal learning. When paired with effective pedagogy, mobile technologies can positively impact the teaching and learning experience for students in high-demand science, technology, engineering and mathematics (STEM) disciplines, increasing the flexibility and ease with which they are able to pursue their education while developing their professional identities as engineers. Student retention remains a problem in STEM programs. In engineering, many students do not even …

Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Interrogation of composite structures for inherent damage is investigated by implementing a three-tier analysis scheme. The analysis starts at the structure level where a general-purpose Finite Element code ABAQUS is employed to obtain the stress field in the second level of analysis which is the composite laminate. A special material routine is prepared to propagate the local fields to the individual plies and hence to the third level of analysis which is the microstructure modeling of the composite. Through the third level of analysis, interface damage between fiber and matrix is checked implementing a certain failure criteria. The interaction between …

Design Of A Surrogate Hypersonic Inlet For The Hifire-6 Configuration, Joseph W. Mileski

Browse all Theses and Dissertations

Shock wave-boundary layer interactions can significantly impact the operability of high-speed inlets by inducing flow separation. This flow separation is difficult to visualize in three-dimensional, inward-turning inlets because of the curved surfaces that form their internal flow paths. To remedy this challenge, a surrogate test article was created. Using the results from a previously completed Computational Fluid Dynamic (CFD) analysis of the HIFiRE-6, a surrogate inlet with a rectangular isolator section was streamline-traced, allowing for the use of schlieren imagery to capture the separation bubble. This thesis discusses the process of developing the test article. Experimental results from a planned …

Ljm Rc Baja Vehicle Project Chassis And Suspension, Paul Lervick

All Undergraduate Projects

An RC car was designed, analyzed, and manufactured to compete in the ASME RC Baja competition. The focus was to optimize the suspension and chassis components to minimize the weight while maintaining the structural strength of the components which would intern supplement the overall speed and stability of the vehicle. Other components were the responsibility of the teammate Cam Jamison. To complete this there was extensive research done on Traxxas RC cars and what went into making a high-performing vehicle that would compete well in the 3 races that comprise the competition (slalom, sprint, and obstacle course). There were then …

Novel Hybrid Solar Nanophotonic Distillation Membrane With Photovoltaic Module For Co-Production Of Electricity And Water, Alejandro Espejo Sanchez, Nipun Goel, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Solar energy utilization and desalination are both critical needs for large portions of the world facing energy and water challenges. Direct contact membrane distillation is an attractive thermally driven desalination technique that can easily be integrated with solar energy. Here we propose and experimentally demonstrate for the first time a hybrid direct contact membrane desalination plus photovoltaic device. The system utilizes partially transparent photovoltaic cells to produce electricity and pass thermal energy to the nanoparticle doped membrane to produce thermal energy at the membrane surface. A custom lab-scale direct contact membrane distillation setup characterizes the membranes fabricated off-sun and on-sun. …

In-Flow Dynamics Of An Area-Difference-Energy Spring-Particle Red Blood Cell Model On Non-Uniform Grids, Brendan Walsh, Fergal Boyle

Articles

In this paper the area-difference-energy spring-particle (ADE-SP) red blood cell (RBC) structural model developed by Chen and Boyle is coupled with a lattice Boltzmann flux solver to simulate RBC dynamics. The novel ADE-SP model accounts for bending resistance due to the membrane area difference of RBCs while the lattice Boltzmann flux solver offers reduced computational runtimes through GPU parallelisation and enabling the employment of non-uniform meshes. This coupled model is used to simulate RBC dynamics and predictions are compared with existing experimental measurements. The simulations successfully predict tumbling, tank-treading, swinging and intermittent behaviour of an RBC in shear flow, and …

Rc Baja Independent Suspension And Chassis Design And Development, Joseph Fritz

All Undergraduate Projects

The goal of this project is to develop an RC car to compete in the MET RC Baja competition. A car will be constructed to be as lightweight, durable, and fast as possible while abiding by ROAR (Remotely Operated Auto Racers) regulations. As such, suspension, steering, chassis and drivetrain systems will need to be devised to form a complete vehicle. The chassis must provide mounting points for all other components of the vehicle and provide a rigid platform in order to create a stable vehicle. The suspension must operate smoothly, allowing for at least 1 inch of ground clearance, …

Vision And Radar Steering Reduces Agricultural Sprayer Operator Stress Without Compromising Steering Performance, Travis A. Burgers, Kelly J. Vanderwerff

Mechanical Engineering Faculty Publications

Self-propelled agricultural sprayer operators work an average of 15 h d^-1 in peak season, and steering is the task that causes the operator the most stress because of the large number of stimuli involved. Automatic guidance systems help reduce stress and fatigue for operators by allowing them to focus on tasks other than steering. Physiological signals like skin conductance (electrodermal activity, EDA) change with stress and can be used to identify stressful events. The objective of this study was to determine if using a commercially available vision and radar guidance system (VSN®, Raven Industries) reduces agricultural sprayer operators’ stress …

Improving Quantification Of Mitral Regurgitation Through Computational Fluid Dynamics And Ex Vivo Testing, Alexandra Flowers

Electronic Theses and Dissertations

Mitral regurgitation (MR) is a prominent cardiac disease affecting more than two million people in the United States alone. In order for patients to receive proper therapy, regurgitant volume must first be quantified. As there are an array of methods to do so, the proximal isovelocity surface area (PISA) method continues to be the most accurate and clinically used method. However, there are some difficulties obtaining the necessary measurements need for this when performing transthoracic echocardiography. This study aims to evaluate and present techniques that may be used to more accurately quantify regurgitation through ex vivo testing and computational fluid …

Monitoring Of State Transitions In Extreme Environment Application Materials Using Fiber Bragg Grating Sensors, Sabuj Khadka

Electronic Theses and Dissertations

By embedding both a single fiber Bragg grating (FBG) sensor and a thermocouple (TC) during the manufacturing for extreme environment applications of certain classes of materials such as metals and polymers, a novel in-situ approach was developed to precisely monitor their entire manufacturing processes. This novel monitoring technique was able to identify many characteristic points during the curing of room and high-temperature epoxies and the solidification processes of metal alloys composed of tin and bismuth which were selected in this research purely for verification purposes. Some of the characteristic points identified for the epoxies were: (i) the gel point, (ii) …

Structural And Hemodynamic Analysis Of Transcatheter Aortic Valves, Dong Qiu

Electronic Theses and Dissertations

The transcatheter aortic valve replacement (TAVR) procedure has become a well-established procedure for high, intermediate-risk, and low-risk patients. However, there is limited clinical data on the TAV's long-term durability, unlike SAV devices. Computational simulations can be an alternative way to evaluate the TAV devices. This dissertation aims to conduct structural and hemodynamic analyses on the TAV devices under different conditions using computational simulation approaches.

Initially, the impact of the bicuspid aortic valve on the TAV devices was evaluated. The result indicated that the CoreValve-like supra-annular self-expandable device was likely to have increased stress and strain on the leaflet when it …

Measuring Engineering Students’ Engagement In Sustainability Design Concepts, Karen Perez, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Within industries, governments, and accreditation organizations, there has been a push to incorporate sustainability concepts into engineering education. Universities like Boise State University (BSU) are starting to place greater emphasis on the inclusion of sustainability concepts in different engineering program curricula. As part of a project funded by the National Science Foundation (NSF), the BSU mechanical engineering program is integrating sustainability concepts specifically by using active learning modules (ALMs) suitable for each level of student education, progressing from freshman to senior. ALMs have shown to be more effective in improving motivation in the classroom compared to traditional learning. To measure …

Team H&H Rc Baja: Chassis & Suspension, John Huff

All Undergraduate Projects

An RC car needed to be created to meet set requirements to compete in the annual American Society of Mechanical Engineers RC Baja Competition. Students of the Mechanical Engineering Department of Central Washington University developed an RC car that has working suspension/ chassis size to hold a all components of a working RC car with a floating rear end. This RC car needed to meet set requirements to compete in the annual American Society of Mechanical Engineers RC Baja Competition. The requirements relative to the suspension/chassis is that the RC car must not exceed a weight of 10lb, must not …

Me 343 Heat Transfer Laboratory, 6th Edition

Mechanical Engineering Lab Manuals

Welcome to the documentation used to describe and conduct ten heat transfer experiments located in the Thermal Sciences Laboratory in Building 13, Room 203, at Cal Poly State University. All of the experiments are designed to illustrate many of the concepts that are presented in undergraduate thermodynamics and heat transfer classes. The first objective of each lab is to provide students with hands-on experience with thermal science experiments. This includes working with standard facilities and instrumentation commonly found in thermal science laboratories. The second objective of each lab is to learn how to use experimentally collected data to either validate …

Clarity, Organization, Precision, Economy: A Technical Writing Guide For Engineers, David J. Adams, University Of New Haven

Civil Engineering Faculty Book Series

This fourth edition of COPE was sparked by my involvement with PITCH (Project to Integrate Technical Communication Habits) at the Tagliatela College of Engineering at the University of New Haven. This new edition contains additional material on data displays, as well as some additional material on writing about data—including how to avoid rhetorical shifts that undermine the precision of a technical report.

The Role Of Ball Backspin Alignment And Variability In Basketball Shooting Accuracy, Nathan Slegers, Dave Love

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Interaction between the shooting hand and ball at the moment a basketball is released generates a three dimensional backspin of the ball. This study is the first to investigate how characteristics of the backspin alignment and variability contribute to lateral shooting accuracy. Spin axis (SA) direction and backspin magnitude were measured on 25 shot attempts for 26 collegiate basketball players (male: n = 16, female: n = 10). The mean SA alignment, as viewed from the shooting hand side, was found to be tipped down and towards the target (p < 0.001). Standard deviations (SD) in the SA alignment were strong predictors of lateral accuracy (vertical SD: r = 0.80, p < 0.001, forward-backward SD: r = 0.51, p = 0.01), with variation in the vertical alignment being the best predictor. No significant correlation between mean SA misalignment and lateral accuracy was observed. However, intra-individual relationships between SA misalignment and lateral error revealed that individuals tended to have 0.17 degrees more misalignment for each cm of lateral error (p < 0.001, 95% CI: 0.24–0.09). These indicate that while an individual’s mean alignment may not predict lateral accuracy, improving one’s SA alignment and reducing alignment variability may increase lateral accuracy.

Rc Baja Drivetrain And Steering, Jacob Swift

All Undergraduate Projects

The goal of this project is to construct a small remote-control vehicle that is capable of fluid, controlled and precise movement. In order to allow the smooth movement of an RC Car through an obstacle course, the back wheels of the car must be able to receive power and the front wheels must be able to turn. This chassis and suspension that supported these assemblies was designed by project partner Sean Gordon. Design requirements were as follows:

• Drivetrain and Steering systems must weigh a combined

• Drivetrain must produce a maximum output speed >=20mph

• Turning angle of no less than 45 …

Rc Baja: Drivetrain And Steering, Mathew Morgan

All Undergraduate Projects

The RC Baja competition is a contest where undergraduate mechanical engineering students design, build, and compete against one another. The objective of this competition is to create the most efficient RC car possible. A gear train analysis was done and showed an 8:1 gear ratio would be the most efficient ratio due to the chosen motor having a higher torque output. Also, a stress analysis was done and showed that 2011 T3 aluminum passed the stress and weight criteria. These analyses ensured the RC Baja car was efficient. Most of the parts for the drivetrain and steering subassemblies were machined …

Jcati Crusher Drive Train, Matthew Denchel

All Undergraduate Projects

This project is sponsored by JCATI (Joint Center for Aerospace Technology Innovation) to research and manufacture a machine to recycle strips of carbon fiber from retired aircraft wings. The drive train powering the crushing wheels was not delivering enough power into the crushing wheels to completely delaminate the strips of carbon fiber. Another issue experienced was the spur gears transferring power between crushing shafts failed.

This issue was first approached by analyzing the gear reduction ratio powering the crushing wheels. Then the next analysis was performed to find the amount of torque required to delaminate the carbon fiber. The minimum …

Jcati Carbon Fiber Recycler: Oven Enclosure, Margarita Romero

All Undergraduate Projects

Central Washington University partners with Boeing and is funded by the Joint Center of Aerospace Technology Innovation (JCATI) to develop a mechanism that takes carbon fiber wing trimmings from Boeing that are resin coated and recycles carbon fiber. This is done by crushing the wing trimmings and then putting it into a 500°C oven to melt off the resin. This project focuses on the enclosure for the oven and making sure precautions are met such as having the outside surface be less than 45c through heat transfer analysis, argon fills enclosure in 13 minutes through fluid dynamics analysis, and 99% …

R/C Baja Truck Suspension, Chassis And Steering, Ryan Lafrombois

All Undergraduate Projects

The ASME RC Baja Challenge is an annual competition that the Central Washington University Mechanical Engineering and Technology (MET) department takes part in. Senior level engineers divided the work between the drivetrain and the chassis/suspension while designing and manufacturing to meet a set of requirements. Next, a device was to be developed to be able to withstand the extreme forces to be successful in the competition at the end of the year. The process would require that the students use their acquired knowledge and skills to design, manufacture, and analyze a capable device. Designing involved the completion of 12 analyses …

Jcati Carbon Fiber Recycler: Oven Heating System, Sean Tomkins

All Undergraduate Projects

What happens to carbon fiber from airline wing tips when their service life ends, and they get replaced? Throwing them away would be wasteful, the Joint Center for Aerospace Technology Innovation (JCATI) project can extract the carbon fiber from airline wing tips to be recycled. The JCATI project is a continuation from the work done by previous senior class engineering students and has a new set of issues to be addressed each year. This year there was a need for a new oven system for the JCATI carbon fiber recycler with this project’s focus being on designing the oven’s heating …

Rc Baja Engineering Report, Matthew Hart

All Undergraduate Projects

The ASME RC Baja is a competition that tests engineering students’ ability design, build, and test an RC car. The vehicle then competes against other engineering student’s RC cars. The objective is to manufacture the most efficient and cost-effective RC Baja car.

During the first quarter of senior project, the student’ engineering skill was applied to designing an RC car that will be able to compete in a competition at the end of spring quarter. The student was tasked with using all the information from the classes the student had taken previously at Central Washington University and design and build …

Zips Racing Electric 2022 Brakes Subsystem Design, Nicholas Thomas

Williams Honors College, Honors Research Projects

This project will include the design, manufacture, and assembly of the entire brakes subsystem for the Zips Racing Electric (ZRE) 2022 car. Goals of the brakes system include a lightweight, modular, machinable, and rigid design. The project will begin in the Fall semester with the design of the pedals and rotors as well as calculations to specify master cylinders, calipers, pads, etc. Software such as SolidWorks CAD, SolidWorks FEA, and Mastercam CAM will be employed. Next, the second semester will involve manufacturing or purchasing necessary components. Prototype pedals will be manufactured for physical testing.

The project will be completed individually. …

Am Surface Roughness And Its Impact On Drag, Jackson Landry Chandler

Honors Academy

“The main goal of this thesis is to quantify additive manufacturing (AM) surface roughness, as a precursor to identifying its impact on unsteady transient flow properties. Experimental data using the Hirox optical microscopes and SEM imaging collected from the nylon and stainless-steel lattice structures contained an inherent level of surface roughness at the finer scale. Surface Roughness have a negative effect on additively manufactured materials and as such should be mitigated whenever possible. Surface roughness increases unwanted features such as the level of drag, skin friction, negative heat transfer/mass transfer properties, and other unwanted unsteady transitional flow characteristics. Though exceptions …

Atomistic-Continuum Membrane And Machine Learning Models For Two-Dimensional Materials, Upenda Yadav

Dissertations, Master's Theses and Master's Reports

“What could we do with layered structures with just the right layers?” asked Richard Feynman in his famous 1959 lecture, “There’s plenty of room at the bottom.” With the help of the amazing developments of the past several years, we are coming close to answering that question. In 2004, graphene was first isolated from graphite and only six short years later it won the Nobel Prize in Physics. Graphene is one atomic layer of Carbon, it is the thinnest and yet the strongest materials we have ever seen. It is 200 times stronger than its equivalent weight in steel and …

Modeling And Simulation Of A Power Plant Boiler Including The Dynamics Of Swell And Shrink, Richard Perman

Electronic Theses and Dissertations, 2020-2023

Renewables such as photovoltaics and wind turbines have seen consistent growth in markets across the globe. While renewables increase grid capacity and reduce the use of fossil fuels, their generation rates fluctuate subject to external factors. As the ratio of renewables to nonrenewables increases, so does variability of net load on intermediate and peaking power plants. Power plants with heat recovery steam generators (HRSG) constitute a significant proportion in these categories. There are several interconnected systems within HRSGs, including drum boilers which exhibit interesting transient phenomena known as swell and shrink. Improved understanding, dynamic modeling, and real-time simulation (RTS) of …

Experimental And Computational Heat Transfer Study Of Sco2 Single Jet Impingement, John Richardson

Electronic Theses and Dissertations, 2020-2023

The present study experimentally investigates the heat transfer capability of supercritical carbon dioxide (sCO2) single-jet impingement. The evaluated jet Reynolds number range is between 80,000 and 1,000,000, with a non-dimensional jet-to-target surface spacing of 2.8. CO2-impinging jet stagnation conditions were maintained at approximately 20 MPa and a temperature of 673 K for most experiments. The goal is to understand how changes in the aforementioned parameters influence heat transfer between the working fluid and the heated surface. Additionally, due to the elevated Reynolds numbers and difference in thermodynamic properties between air and CO2, air-derived impingement correlations may not be appropriate for …

Computational Modeling Of Respiratory Airflow In Human Distal Airways Using Hybrid Lung Model, Adnan Islam

Electronic Theses and Dissertations, 2020-2023

A major challenge in the Computational Fluid Dynamics (CFD) modeling of the human respiratory system is the complex variation of geometric scale from the trachea to the peripheral airways. The current literature on image-based lung flow analysis is limited to a few (typically 5) generations beyond the trachea. Such studies, which are limited largely by computational intensity and computational cost, also have limited accuracy. In this study we propose a hybrid methodology that enables CFD analysis from the middle to the distal airways through to the alveolar level. A hybrid lung model is generated where the middle airways are reconstructed …