Mechanical Engineering Commons^™

Reducing Torsion In Asymmetric Structures During Earthquakes Through Active Control, Keona Lauren Banks

Honors Capstone Projects and Theses

No abstract provided.

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

Classifying Hazardous Movements And Loads During Manual Materials Handling Using Accelerometers And Instrumented Insoles., Mitja Trkov, Duncan T Stevenson, Andrew S Merryweather

Henry M. Rowan College of Engineering Departmental Research

Improper manual material handling (MMH) techniques are shown to lead to low back pain, the most common work-related musculoskeletal disorder. Due to the complex nature and variability of MMH and obtrusiveness and subjectiveness of existing hazard analysis methods, providing systematic, continuous, and automated risk assessment is challenging. We present a machine learning algorithm to detect and classify MMH tasks using minimally-intrusive instrumented insoles and chest-mounted accelerometers. Six participants performed standing, walking, lifting/lowering, carrying, side-to-side load transferring (i.e., 5.7 kg and 12.5 kg), and pushing/pulling. Lifting and carrying loads as well as hazardous behaviors (i.e., stooping, overextending and jerky lifting) were …

Mechanistic Undrestanding Of Amorphization In Iron-Based Soft Magnetic Materials, Taban Larimian

ETD Archive

Iron-based magnetic alloys possess very good magnetic and mechanical properties. Among these alloys Fe-Si-B-based alloys show outstanding saturation magnetization and coercivity which makes them great candidates for many industrial applications. Addition of certain elements to the Fe-Si-B base is proven to improve the homogeneity and fineness of microstructure as well as enhance the magnetic behavior of these alloys. In this research work, we have studied the effect of adding copper and niobium to the Fe-Si-B base alloy. Previous studies have shown that magnetic alloys show better magnetic properties when their microstructure consists of nanocrystals embedded in an amorphous matrix. In …

Understanding Thermal Comfort Impact And Air Movement Around Open Stairs Through The Use Of Cfd Modeling, Ethan Davidson

Graduate Theses and Dissertations

The air exchange between two floors of a building has an impact on thermal comfort. The present research attempts to quantify this impact and identify the contributing factors disrupting the thermal comfort on and around stairs. Various heating and cooling scenarios were analyzed, using CFD modeling, in a simple two-story building separated by a single staircase. The research examines a single building layout with a fixed inlet and outlet configuration. In addition, the study investigated the short-term impact on thermal comfort. As a result, the duration of the simulations varies from two and half minutes to ten minutes, consistent with …

Development Of An Accelerated Life Testing Method For Reliability Assessment Of Wire Bonded Interconnects Subjected To Mechanical And Electromigratory Stresses, Whit Vinson

Graduate Theses and Dissertations

Power electronic advancement trends indicate that device power density will continue to increase as a result of increased power requirements and desired device form factor reduction in order to reduce weight and material costs and increase ease of integration into next-generation power systems. With these advancements come concerns regarding device reliability. The compounded effects of increased power density and form factor reduction in electrical conductors will yield amplified joule heating effects in addition to the already increasing device temperature profiles resulting from the incorporation of wide bandgap technology into power systems. Joule heating effects can lead to a variety of …

Ballasting System For An Autonomous Underwater Vehicle, Noura Rayes, Bahram Nassersharif, Zach Champney, Kyle Alessandro, Jason Mirandou

Senior Honors Projects

NOURA RAYES (Mechanical Engineering); Ballasting System for an Autonomous Underwater Vehicle Sponsor: Bahram Nassersharif (Mechanical Engineering)

Over the last year, our Mechanical Engineering Capstone team, Nautilus, has been working to design a ballasting system for various Autonomous Underwater Vehicles (AUVs) sponsored by Raytheon Technologies. Common AUV systems are used for a wide range of applications from environmental monitoring, oceanic exploration, to data collection. AUVs also have many technical advantages that make underwater tasks more efficient, cost-effective, and generally safer. Raytheon Technology, specifically, is looking to improve their existing ballasting mechanism for their AUVs to use for military defense. For this …

The Development And Characterization Of Piezoelectric- Magnetostrictive Smart Self-Sensing Composites, George Relebohile Qhonosheane

Mechanical and Aerospace Engineering Dissertations - Archive

The composites industry is expanding due to the growing global demand for high-performance materials. How do you ensure the production of composites is as smooth and effective as possible while maintaining the high quality of the material? The key issues in composites include crack occurrence, sticking to molds in the production process, and durability differences during their operation. However, monitoring such cases can be challenging. The industry is in need of a smart solution to be able to obtain accurate data from the raw material. This work focuses on the development of smart composite materials. The word composite comes from …

Assessment Of Contaminant Flowpaths In Airside Economization And Analysis Of Thermal Performance At Tank And Server Level For Single-Phase Immersion Cooled Data Centers, Satyam Saini

Mechanical and Aerospace Engineering Dissertations - Archive

The last two decades of 2000 have seen an explosion of utilization and reliance on digital technologies and platforms. During this time, electronic devices have undergone intense miniaturization and a corresponding rise in power densities. In parallel to these developments, data center proliferation has been driven by the increasing utility of revolutionary technologies such as Machine Learning, Artificial Intelligence, e-commerce and, the Internet of Things. Data centers, thus, have become the core of the modern digital age. The primary bottleneck, however, due to extensive device miniaturization and data center proliferation has always been thermal management. Many of the aforementioned technologies …

Development Of An Electro-Pneumatic Servo Clutch And Industry-Level Controller, Timothy Stevens

Mechanical and Aerospace Engineering Theses - Archive

This thesis covers the simulation and development of an electro-pneumatic servo clutch used on an FSAE racecar. This project utilizes a sophisticated simulation and various techniques to increase performance such as utilizing pulse-width and pulse-frequency modulation and the use of a 36V supply with constant current limiting to drive the solenoids. The clutch is actuated using a pneumatic cylinder with the internal pressure modulated using commercially available CNG fuel injectors. This thesis also describes the development of the electronic controller designed using analog circuits, as well as the integration of digital circuits to control operations such as launch control and …

Computational Reliability Analysis Of Blind Micro-Via With 3d And Axisymmetric Multi-Layer Pcb, Jayendra Bazaru

Mechanical and Aerospace Engineering Theses - Archive

Micro-via are components that are used to form connections from one layer to another in most Multilayered Printed Circuit Boards (PCBs). The failure of Micro-via has always been a concern of the electronic industry. The failures are exaggerated during the reflow process due to the high thermal loading. Electronic components have become ubiquitous in our society. It is important to take some measures to reduce (or) eliminate the failures at interconnects in the Printed Circuit Board to obtain highly reliable Input/Output (I/O). This work is based on a hypothetical belief that the possible cause of failure is an insufficient or …

A Study On Effect Of Manufacturing Parameters On Morphology Of A356 Aluminum Foam, Nikhil Nanabhau Mahajan

All Theses

Metal foams have shown an excellent promise for usage as multifunctional material concerning research & development in the last 20 years. They provide remarkable mechanical as well as physical properties being lightweight. Open-cell metal foams have already been used in sound and noise absorption. Open-cell metal foams are outstanding for use in heat exchangers, filters, and many more applications, while closed-cell foams show excellent characteristics in impact energy absorptions. Closed-cell metal foams have higher energy absorption than their solid parent metal as they convert most of the impact energy into deformation energy. Metal foams have been used as prominent safeguard …

Autonomous Aerial Vehicles Distributed Control And Interactive Games, Yusuf Kartal

Mechanical and Aerospace Engineering Dissertations - Archive

As the number of quadrotors and other Unmanned Aerial Vehicles (UAVs) increases in industrial and urban areas, the development of reliable engineering methods to control their behavior as they interact with each other becomes of central interest in control research. With the increase in demand for UAVs to work together, several real-life challenges need to be addressed that include the implementation, test, and validation of the control algorithms in flight test experiments. On the one hand, the interests of UAVs may be in harmony to perform certain tasks such as transportation, surveillance and reconnaissance. On the other hand, the interests …

Enhancing Stability Of High-Nickel Cathodes For Lithium-Ion Batteries Through Additive Manufacturing Of Cathode Structure, Matthew Sullivan

Mechanical Engineering Undergraduate Honors Theses

Lithium-ion batteries (LIBs) are currently the best method to store electrical energy for use in portable electronics and electronic vehicles. New cathode materials for LIBs are consistently studied and researched, but few are as promising and attainable as nickel-rich transition metal oxides such as LiNi1-x-yMnxCoyO2 (NMC). NMC materials exist with many different mass ratios, but higher nickel content materials provide higher energy density. With this increase in capacity comes a sacrifice with cyclability, as high-nickel NMC variants are prone to structure collapse, transition metal dissolution, and cracks due to volume change. In this report, mechanical modification of the electrode by …

Modeling Energy Efficiency Of Solar Thermal Powered Batch Reverse Osmosis, Lahiri Chitturi

Discovery Undergraduate Interdisciplinary Research Internship

Batch reverse osmosis is the most energy efficient water desalination method and when powered by renewable energy, suggests promise for a cost-effective, low-carbon solution. One abundant energy source on Earth is solar energy which can be implemented using solar panels which have an established maximum efficiency of 25%, or solar thermal engines which can outperform solar photovoltaic systems by achieving higher efficiencies between 20% and 40% according to market research. Here, an approach to model and quantify the energy efficiency of a direct-drive solar thermal powered batch reverse osmosis system is presented to indicate the feasibility of pursuing this technology. …

Managing Humidity In Electronics Using Water Vapor-Selective Membranes, Songhao Wu, Andrew J. Fix, Allison Mou, David M. Warsinger, James Braun

Discovery Undergraduate Interdisciplinary Research Internship

Abstract: As outdoor electronics have become prevalent in every aspect of daily life, handling humidity in them is an emerging issue for reliable devices. As water vapor enters the electronics enclosure, there is a risk of condensation, which could prevent the electronics from functioning and further damage the device. Traditionally, the humidity removal for electronics is usually done by heating the air within the enclosure, which can be energy-intensive and less efficient. Vapor selective membrane systems are promising alternatives for air heating dehumidification as they do not require heating energy for water vapor removal. It allows water vapor transport through …

Control, Decision-Making, And Learning Approaches For Connected And Autonomous Driving Systems With Humans-In-The-Loop, Fangjian Li

All Dissertations

By virtue of vehicular connectivity and automation, the vehicle becomes increasingly intelligent and self-driving capable. However, no matter what automation level the vehicle can achieve, humans will still be in the loop despite their roles. First, considering the manual driving car as a disturbance to the connected and autonomous vehicles (CAVs), a novel string stability is proposed for mixed traffic platoons consisting of both autonomous and manual driving cars to guarantee acceptable motion fluctuation and platoon safety. Furthermore, humans are naturally considered as the rider in the passenger vehicle. A human-centered cooperative adaptive cruise control (CACC) is designed to improve …

Examining The Different Snap-Through Characteristics Of Bistable Cfrp Composite Laminates, Vishrut Deshpande

All Theses

Bistable carbon fiber composites, whose bistability arises from having asymmetric fiber layouts in different layers, have shown immense potential for use in shape morphing and adaptive structure applications. While many studies in this field focus on these composite laminates’ external shapes at the two stable states, their snap-through behavior of shifting from one stable shape to the other remains a critical aspect to be investigated in complete detail. Moreover, symmetric loading conditions have been extensively studied based on the classical lamination theory, but the asymmetric loading conditions received far less attention. Therefore, this study examines an asymmetric, localized point load …

A Central Compact Hybrid-Variable Method With Spectral-Like Resolution, Md Mahmudul Hasan

Open Access Theses & Dissertations

Numerical methods for hyperbolic conservation laws have been a driving force for theresearch in scientific computing and simulation science in the past decades, as many physical, biological, and engineering systems are governed by these equations, such as fluid mechanics, tumor growth, and virtual wind tunnel simulations. Despite the existence of many schemes in the literature, people have never stopped searching for more accurate and efficient methods for these problems. Indeed, the increasing complexity of systems in emerging applications demands better resolution of sub-grid scale phenomenon whereas classical methods usually fail to deliver high-fidelity simulation results of such systems within realistic …

Rheological Behavior Of Dspc-, Dbpc-, And Dppc-Oxygen Microbubbles And Their Effectiveness In Improving Survival In A Rat Model Of Lipopolysaccharide-Induced Acute Respiratory Distress Syndrome, Riaz Ur Rehman Mohammed

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) causes 75,000 deaths in the U.S., annually. It is characterized by hypoxemia and damage to the lung alveoli. ARDS Management strategies involve extracorporeal membrane oxygenation (ECMO) and mechanical ventilation, but none of these methods improve the mortality rates. Oxygen microbubbles (OMBs) consist of a lipid shell with an oxygen core and have potential to augment oxygenation to manage ARDS. Previous studies demonstrated significant improvements in systemic oxygenation and mortality upon administering OMBs.

We replicated an ARDS rat model by intratracheal administration of lipopolysaccharide at a 24 mg/kg dose. After inducing the disease in rats, the …

Ambient Temperature Phase Change Launcher, Johnny Molloy

Senior Honors Projects

JOHNNY MOLLOY (Mechanical Engineering) Ambient Temperature Phase Change Launcher Sponsor: Bahram Nassersharif (Mechanical Engineering)

Deployment of payloads stored in watertight cylindrical bodies in underwater environmental conditions are of interest to the marine and naval community. The proposed work will investigate the possibility of using inert carbon dioxide gas compressed into its liquid state and stored under pressure to launch payloads by means of expansion from a cylindrical tube. To suit the needs of the Naval Undersea Warfare Center (NUWC), this launching system must fire from up to 14 ft underwater, have two degrees of freedom, and the payload must not …

Corrosion Assessment Of Biodegradable Metal Implants For Orthopedic Applications, Wendy B. Reynoso-Diaz

Honors Theses

Magnesium alloys are the most promising materials to be used as biodegradable implants mainly due to their superior biocompatibility and lower specific density compared to other biodegradable metals (i.e., zinc and iron-based alloys). This study is investigating the effect of two different manufacturing methods and purity levels on the corrosion rates of a novel Mg-Zn-Ca-Mn-based alloy. Experimental in vitro corrosion tests were conducted on the biocompatible Mg-Zn-Ca-Mn-based alloy fabricated using conventional casting and hot rolling with low and high purity levels. The experimental research conducted, assessed the corrosion rates of the following Mg-1.2Zn-0.5Ca-0.5Mn-based alloys: Hot Rolled High Purity, As-Cast High …

Atomic Force Microscopy Based Dna Sensing And Manipulation, Matthew Shubert

Mechanical Engineering Undergraduate Honors Theses

Sequencing DNA provides a positive impact for the biomedical community by understanding a wide variety of applications such as human genetics, disease, and pathogens. The reason the Arkansas Micro & Nano Systems lab is involved with research in DNA sequencing is due to the current, leading industry method. Nanopore sequencing was developed by Oxford Nanopore Technology in which its sequencing method separates double stranded DNA to electrically characterize individual nucleotides traveling through a charged nanopore. Unfortunately, nanopore sequencing uses biological materials that require a shelf life and drives high cost. Therefore, the Arkansas Micro & Nano Systems lab has developed …

Fuel Injector Design Of A Hypersonic Jet Engine Using Computational Fluid Dynamics, Melissa Rose Mercado

UNLV Theses, Dissertations, Professional Papers, and Capstones

The development of hypersonic airbreathing engines, such as a supersonic combustion ramjet, or scramjet, are implemented for flight Mach numbers over 5 where combustion must occur in supersonic conditions. The advancement of scramjet propulsion has led to favored usage over rocket propulsion systems for in atmosphere applications due to their lighter weight, higher specific impulse, and greater maneuverability [1]. The combustor section of a scramjet engine houses the fuel injectors. Fuel is injected into the supersonic flow with the main objective of achieving rapid and thorough fuel-air mixing because the residence time in the combustion chamber has a timescale of …

Predicting The Progression Of Diabetes Mellitus Using Dynamic Plantar Pressure Parameters, Mathew Sunil Varre

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: Diabetic peripheral neuropathy is one of the common complications of type-2 diabetes mellitus (DM). Changes in the intrinsic plantar tissue coupled with repetitive mechanical loads and loss of sensation may lead to foot related complications (skin break down, ulcerations, and amputations) in persons with neuropathy if left untreated. The purpose of this dissertation was to stratify individuals with pre-diabetes, diabetes with and without neuropathy using dynamic plantar pressure parameters during walking, using machine learning algorithms.Methods: Plantar pressure data was collected from one hundred participants during walking with pressure measuring insoles fixed between the feet and thin socks. Simultaneously high-definition …

Biofidelic Considerations For Improving Standardized Airflow And Firmness Testing For Infant Sleep Products, Wyatt D. Davis

Boise State University Theses and Dissertations

Background

Over the last 30 years, 83 infant fatalities (113 reported, 30 incidental) directly involving crib bumpers have been reported to the Consumer Product Safety Commission. Of these reports, 90% are for infants under a year old, with 61% occurring for infants between 1 and 4 months of age (Safety, 2020). There are currently a few regulations governing the design of crib bumper products, but none test the suffocation risk associated with these products using biofidelic methods.

Goals

We sought to explore the development of new testing methods that can determine the safety of different products and are physiologically representative …

Additive Manufacturing Of Variable Contrast Computed Tomography Anatomical Phantoms Using A Single Feedstock In Fused Filament Fabrication, Cory J. Darling

LSU New Orleans Theses and Dissertations

Anatomical phantoms used in biomedical education and training benefit greatly from Fused filament fabrication’s (FFF) ability to rapidly produce complex and unique models. Current materials and methods used in FFF have limited ability to accurately produce phantoms that can mimic the radiological properties of multiple biological tissues. This research demonstrates that the CT contrast of FFF produced models can be modified by varying the concentration of bismuth oxide in acrylonitrile butadiene styrene (ABS) filaments and a tunable CT contrast that mimics the CT contrast ranging from fatty tissue to cortical bone using a single composite filament without introducing artificial image …

Strain-Based Design Of Steel-Polymer-Steel Composite Pipes, Vul Thang

LSU New Orleans Theses and Dissertations

Many offshore single-wall pipelines and structural failures have occurred in the past. As a result, lives were lost, and billions of dollars were spent. In addition, natural disasters such as earthquake fault zones can cause a large volume of soil movement. This can easily damage single-wall pipelines or piles of fixed offshore platforms in the earthquake fault zone.

Currently, the single-wall pipelines are used for the offshore and onshore oil and gas industry. This research investigated the use of double-wall composite pipe steel-polymer-steel (SPS) in place of single-wall pipe to prevent such failures. The double-wall composite pipe has a larger …

Cal Poly Fluid Power Vehicle Challenge 2022, Sangmin Sung, Eddy Rodriguez, Travis Welch, Jeremy Baechler, Kevin Pauls

Mechanical Engineering

In this report, the Featherweight Cycles design team puts forth the scope and overview of their design project, discusses background research and competitor analysis, and presents the project’s final design and manufacturing plans. The overall goal of this project is to fabricate and compete in the Fluid Power Vehicle Challenge, hosted by the National Fluid Power Association. To better define the design process, the team researched previous year’s designs from Cal Poly, as well as winning designs from the last two years to form a baseline of knowledge about competing schools’ designs. After researching multiple design paths, Featherweight Cycles chose …

Cfd Simulation Of Varying Fuel Jet Placement Of Mach 2 Flow (Poster), Sara Broad

Honors Capstone Projects

No abstract provided.