Mechanical Engineering Commons^™

Demonstration Triple Spool Turbine And Controls, Synnovea Alaina Wood, Marco Eston Salguero, Michael Bruce Megna, Wyatt Scott Conner

Mechanical Engineering

The demonstration triple-spool turbine and controls project consisted of the conceptualization, design, analysis, build, and test of a demonstration model of three concentric driveshafts, such as those used in conventional turbofan (or power generation turbine) engines. Specifically, our team focused on building a basic, portable, mechanical model of such a driveshaft assembly, while also developing the backend firmware/control and user interface software used to control it. This model was developed with the initial intent of use in the Cal Poly engines lab with a goal of remotely controlling the motors driving the driveshaft model by means of a USB cable …

Flow Data Acquisition System, Samuel Chapman Maxwell Iv, Nathaniel Peter Werdmuller Von Elgg, Jameson Robert Spitz, Jason Jia-Shing Hu

Mechanical Engineering

Data acquisition is an essential part of the research and development process of water valves and fittings at Zurn Wilkins. In Fall 2021, Zurn Wilkins approached our senior project team with a goal of creating a modular data acquisition system that streamlines their design and testing processes for new products. Our team determined that a microcontroller-based system was the optimal way to deliver this goal and designed our system around a Raspberry Pi. We chose twelve sensors that were compatible with existing taps in the Zurn Wilkins facility. The sensors send their signal through waterproof receptacles into the Polycase waterproof …

Bike To The Future, Wanjiku Gichigi, Luisa Shu Yi Chiu, Alexander Kalman Dunn, Georgia Ann Holmes

Mechanical Engineering

Brian Higgins is a veteran with retinitis pigmentosa who enjoys biking. The motivation for this project was to design and manufacture a refined prototype of a bike attachment to assist Brian in safely biking to and from work. The customer needs, problem definition, background, design development, final design, testing, costs, and recommendations are provided in this report.

The solution for this project, as laid out in the design development section, was to design an assembly that would detect objects in the biker’s path and relays that information to them. The design incorporated a dashboard to conceal components within, protect them …

Deep Ocean Vehicle (Dov) Scientific Payload, Nichole "Nikki" T. Arm, Mason Gariepy, Brianna Roberts, Kyle C. Walsh

General Engineering

This report aims to provide technical insight into the Deep Ocean Vehicle project performed by the Barrel Eye Explorers. The project was a part of the 2021-2022 Interdisciplinary Senior Project class at California Polytechnic State University, San Luis Obispo. The team consisted of Nikki Arm, Mason Gariepy, Brianna Roberts, and Kyle Walsh who were engineering students in the Mechanical, Materials, General, and Industrial engineering departments, respectively. This project was sponsored by Dr. Crow White and overseen by Karla Carichner. The project was a continuation of Nikki Arm’s internship with Global Ocean Design during the Summer of 2021. The lander, Deep …

Radiology Associates Medical Scan Forecasting, Everett M. Notaro, Mitchell Carpenter, Tyler Deis, Kimberly Williams

Industrial and Manufacturing Engineering

After discontinuing their subscription with Shinyapps and relying on a manual forecasting process, Radiology Associates needs a new method to forecast the number and types of scans that will be executed at each site location. Radiology Associates utilizes Quinsite, which incorporates a live link to their database, as a host for all their Tableau dashboards. This project will create an accurate forecasting model utilizing complex forecasting methods to be hosted by Quinsite which is accessible by all management within Radiology Associates. To begin this process, an exponential smoothing model was created in Tableau to solidify dashboard and storyboard design. Additionally, …

Increasing Legends Salon Revenue Per Square Foot, Jacob William Andreatta, Margaret Faison Gustafson, Julia Galina Odisho, Joshua Spry Morrison

Industrial and Manufacturing Engineering

Katie MacNamara acquired Legends Hair Salon in Atascadero, California in January of 2021. After a few months of learning to run her own business she discovered that her retail revenue per square foot was not high enough. Her goal, and the project objective, was to raise her revenue while also increasing space for her stylists. The metrics used for these objectives were revenue per square foot and the square footage of the retail areas. The beginning state metrics were 48.75 square feet of retail and a retail revenue per square foot of $2.15 with a total of six stylist stations. …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Kinetic Energy Harvesting Device For Long Distance Thru-Hikers, Jarod Reece Lyles, Ryan William Mclaughlin, Shaw Hawkeye Hughes, David Hernandez

Mechanical Engineering

The intent of this project was to design and build a device capable of harnessing biomechanical energy from a thru-hiker to charge electronic devices. To begin, we ruled out any potential solutions that could be intrusive to the hiking experience, limiting us to a device that could be placed in a backpack.

After defining the scope of the project, we ideated upon potential designs, and chose to move forward with a rotational generator based design. Detailed analysis included both system dynamics and vibrations based models, and from this analysis we developed a mechanical design in SOLIDWORKS®️ and a custom printed …

Neurogen: Eeg And Near-Infrared Light Stimulation Device, Louisa Mantilla, Samantha Perez, Michelle Wong

Interdisciplinary Design Senior Theses

Neurodegenerative diseases such as Alzheimer’s, Dementia, and Parkinson’s affect hundreds of millions of people across the nation and world each year. While medications targeting disease pathways have often resulted in debilitating side effects, neurodegenerative diseases may be targeted by common pathways that promote healing of tissues via reduced inflammation, increased perfusion, and increased energy production. Photobiomodulation (PBM) targets all of these physiological processes with non-invasive near infra-red light stimulation and for this application the treatment will be applied to the head. Transcranial PBM has been used to effectively treat neurodegenerative diseases with improved cognitive and motor control outcomes. PBM applied …

Model-Based Design Of An Optimal Lqg Regulator For A Piezoelectric Actuated Smart Structure Using A High-Precision Laser Interferometry Measurement System, Grant P. Gallagher

Master's Theses

Smart structure control systems commonly use piezoceramic sensors or accelerometers as vibration measurement devices. These measurement devices often produce noisy and/or low-precision signals, which makes it difficult to measure small-amplitude vibrations. Laser interferometry devices pose as an alternative high-precision position measurement method, capable of nanometer-scale resolution. The aim of this research is to utilize a model-based design approach to develop and implement a real-time Linear Quadratic Gaussian (LQG) regulator for a piezoelectric actuated smart structure using a high-precision laser interferometry measurement system to suppress the excitation of vibratory modes.

The analytical model of the smart structure is derived using the …

Me-Em Enewsbrief, June 2022, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Grey-Taguchi Approach To Optimize Fused Deposition Modeling Process In Terms Of Mechanical Properties And Dimensional Accuracy, Md Asif Bin Syed, Qausar Rhaman, Hasan Md Shahriar, Mohammad Muhshin Aziz Khan

Graduate Student Scholarship

Fused Deposition Modeling (FDM) is a process that allows for the rapid production of functional parts through the deposition of fused material layers in a sequential manner. FDM has flexibility and the potential to create complicated parts. This study aims to optimize the FDM process parameters in terms of tensile strength, flexural strength, and longitudinal shrinkage using the Grey-Taguchi approach. The input parameters chosen to study the effects on dimension and mechanical properties are layer thickness, the raster angle, fill density, the number of contours, printing temperature, and printing speed. The Taguchi L27 orthogonal array is used as the statistical …

Aerodynamics And Aeroacoustics Optimization Of Vehicle’S Side Mirror Base And Exhaust Pipe, Moath Nayef Mohamed Zaareer

Theses

This thesis is concerned with studying two different vehicle parts in terms of aerodynamics and aeroacoustics. Two main factors determine the efficiency and luxury of the vehicle, the low aerodynamic forces and low noise emission. The aerodynamic drag coefficient is concerned with how easy a vehicle can travel through the air; the lower the value, the less fuel is needed to move the vehicle forward and less air resistance the vehicle faces. The aerodynamic lift coefficient is related to vehicle ground stability, and the more negative the value is, the higher the vehicle's stability. Moreover, the aeroacoustics is concerned with …

Tini-Based Bi-Metallic Shape-Memory Alloy By Laser-Directed Energy Deposition, Yitao Chen, Cesar Ortiz Rios, Braden Mclain, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

In this study, laser-directed energy deposition was applied to build a Ti-rich ternary Ti–Ni–Cu shape-memory alloy onto a TiNi shape-memory alloy substrate to realize the joining of the multifunctional bi-metallic shape-memory alloy structure. The cost-effective Ti, Ni, and Cu elemental powder blend was used for raw materials. Various material characterization approaches were applied to reveal different material properties in two sections. The as-fabricated Ti–Ni–Cu alloy microstructure has the TiNi phase as the matrix with Ti2Ni secondary precipitates. The hardness shows no high values indicating that the major phase is not hard intermetallic. A bonding strength of 569.1 MPa was obtained …

Wake Bifurcations Behind Two Circular Disks In Tandem Arrangement, Jianzhi Yang, Xiaowei Wu, Minghou Liu, Changjian Wang, Yuxin Wu, Zhihe Shen

Mechanical and Materials Engineering Faculty Publications and Presentations

The wake bifurcations behind two circular disks in tandem arrangement are investigated through numerical simulations. The separation distance between the disks, S/d, is chosen at 1, 2, 4, and 6, and the Reynolds number, Re, lies in the range of 100 Re 500. The wake dynamics are examined in terms of the flow structures as well as drag and lift coefficient characteristics. Seven main wake regimes are observed in the considered (Re, S/d) space: steady state (SS), Zig-zig (Zz) mode, standing wave mode, periodic state with reflectional symmetry breaking (RSB), periodic state with double-helical (DH) structures shedding, periodic state with …

Evaluating The Effects Of Granulated Rubber And Glass Fibers In Polymer Concrete As A Structural Material For Wafer Grinding Machines, Kevin Gabriel Kuehn, Philip Randall Streeter

Materials Engineering

Polymer concrete is a composite material used to replace cast iron and steel in wafer grinding machines for vibration damping. During the grinding and lapping processes of manufacturing silicon wafers, excessive vibrations may cause subsurface damage which requires additional polishing and reduces yield. Nine compositions containing various levels of granulated rubber and glass fibers were manufactured. CRM WRF-10 granulated rubber was examined at 0%, 5%, and 10% and Corning Cem-Fil glass fibers were added at 0%, 0.5%, and 1% by weight. Smooth-On EpoxAcast 690 epoxy resin was held constant at 16% for each composition. Crushed granite aggregate from Martin Marietta, …

Investigation Of Topological Phonons In Acoustic Metamaterials, Wenting Cheng

Dissertations

Topological acoustics is a recent and intense area of research. It merges the knowledge of mathematical topology, condensed matter physics, and acoustics. At the same time, it has been pointed out that quasiperiodicity can greatly enhance the periodic table of topological systems. Because quasiperiodic patterns have an intrinsic global degree of freedom, which exists in the topological space called the hull of a pattern, where the shape traced in this topological space is called the phason. The hull augments the physical space, which opens a door to the physics of the integer quantum Hall effect (IQHE) in arbitrary dimensions. In …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Integrating Deep Learning And Hydrodynamic Modeling To Improve The Great Lakes Forecast, Pengfei Xue, Aditya Wagh, Gangfeng Ma, Yilin Wang, Yongchao Yang, Tao Liu, Chenfu Huang

Michigan Tech Publications, Part 1

The Laurentian Great Lakes, one of the world’s largest surface freshwater systems, pose a modeling challenge in seasonal forecast and climate projection. While physics-based hydrodynamic modeling is a fundamental approach, improving the forecast accuracy remains critical. In recent years, machine learning (ML) has quickly emerged in geoscience applications, but its application to the Great Lakes hydrodynamic prediction is still in its early stages. This work is the first one to explore a deep learning approach to predicting spatiotemporal distributions of the lake surface temperature (LST) in the Great Lakes. Our study shows that the Long Short-Term Memory (LSTM) neural network, …

Experimental And Theoretical Studies Of Flows Driven By Soluto- And Thermo-Capillary Forces, Islam Benouaguef

Dissertations

This dissertation aims to study the flow induced in a water body due to the presence of a solute or heat source on its surface. The flow arises because of a change in the local solute concentration or the temperature, which modify the local surface tension, giving rise to a surface tension gradient that drives the flow. These surface tension-driven flows are referred to as Marangoni flows. The following three induced-flows are investigated experimentally and theoretically: (i) Flow induced by a solute source present on a waterbody; (ii) Flow induced due to the impingement of a freshwater drop on a …

Constitutive Modeling And Numerical Simulations Related To Dual And Triple Shape Memory Polymers, Aayush Prasad

Dissertations

Shape memory polymers (SMPs) are a class of soft active materials that have the ability to retain one or multiple temporary shapes and exhibit deformation as a response to stimuli. The temporary shapes involved can be very complex, but SMPs can recover large amounts of strains compared to other smart materials. They have a wide range of applications, and their mechanism can be easily altered. Hence, there is an increasing need to model their behavior.

This study discusses the behavior of a thermally activated subclass of SMPs in which the temporary shape is fixed by a crystalline phase and the …

Monolithic Integration Of Hybrid Perovskite Single Crystals With Silicon For Highly Sensitive X - Ray Detectors, Jinsong Huang, Wei Wei

Department of Mechanical and Materials Engineering: Faculty Publications

Perovskite single crystal X - ray radiation detector devices including an X - ray wavelength - responsive active layer including an organolead trihalide perovskite single crystal, a substrate layer comprising an oxide, and a binding layer disposed between the active layer and the substrate layer. The binding layer including a binding molecule having a first functional group that bonds to the organolead trihalide perovskite single crystal and a second functional bonds with the oxide. Inclusion of the binding layer advantageously reduces device noise while retaining signal intensity.

Simple, Accurate Calculation Of Mechanical Power In Pressure Controlled Ventilation (Pcv), Christine A. Trinkle, Richard N. Broaddus, Jamie L. Sturgill, Christopher M. Waters, Peter E. Morris

Mechanical Engineering Faculty Publications

Background: Mechanical power is a promising new metric to assess energy transfer from a mechanical ventilator to a patient, which combines the contributions of multiple parameters into a single comprehensive value. However, at present, most ventilators are not capable of calculating mechanical power automatically, so there is a need for a simple equation that can be used to estimate this parameter at the bedside. For volume-controlled ventilation (VCV), excellent equations exist for calculating power from basic ventilator parameters, but for pressure-controlled ventilation (PCV), an accurate, easy-to-use equation has been elusive.

Results: Here, we present a new power equation …

Free-Decay Heave Motion Of A Spherical Buoy, Jacob K. Colling, Saeed Jafari Kang, Esmaeil Dehdashti, Salman Husain, Hassan Masoud, Gordon Parker

Michigan Tech Publications, Part 1

We examined the heave motion of a spherical buoy during a free-decay drop test. A comprehensive approach was adopted to study the oscillations of the buoy involving experimental measurements and complementary numerical simulations. The experiments were performed in a wave tank equipped with an array of high-speed motion-capture cameras and a set of high-precision wave gauges. The simulations included three sets of calculations with varying levels of sophistication. Specifically, in one set, the volume-of-fluid (VOF) method was used to solve the incompressible, two-phase, Navier–Stokes equations on an overset grid, whereas the calculations in other sets were based on Cummins and …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

Dual-Band Selective Circular Dichroism In Mid-Infrared Chiral Metasurfaces, Haotian Tang, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most chiral metamaterials and meta surfaces are designed to operate in a single wavelength band and with a certain circular dichroism (CD) value. Here, mid-infrared chiral meta surface absorbers with selective CD in dual-wavelength bands are designed and demonstrated. The dual-band CD selectivity and tunability in the chiral meta surface absorbers are enabled by the unique design of a unit cell with two coupled rectangular bars. It is shown that the sign of CD in each wavelength band can be independently controlled and flipped by simply adjusting the geometric parameters, the width and the length, of the vertical rectangular bars. …

Natural Layered Mercury Antimony Sulfosalt Livingstonite With Anisotropic Optical Properties, Ravi P.N. Tripathi, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Naturally occurring layered mineral livingstonite is identified as a new type of van der Waals (vdW) heterostructure based 2D material, consisting of two commensurately modulated alternating layers of HgSb2S4 and Sb2S4. The heterostructures of livingstonite crystal are prepared as thin flakes via mechanical exfoliation method. The prepared livingstonite crystals are further investigated in the context of vibrational, linear, and nonlinear optical properties, including anisotropic Raman scattering, wavelength-dependent linear dichroism (LD) transition effect, birefringence, and anisotropic third-harmonic generation (THG). Owing to the monoclinic crystal structure, livingstonite crystals exhibit strong anisotropic vibrational and optical responses. In contrast to conventional vdW heterostructures, the …

In Situ Observations Of Fish Attraction To Light-Emitting Diodes On An Undersea Observation Deck, Makoto Tomiyasu, Yoko Tanouchi, Yasuzumi Fujimori, Minato Kaji, Takuma Hayashi, Naoto Matsubara, Hiroki Yasuma, Susumu Shimizu, Seiji Katakura

Journal of Marine Science and Technology–Taiwan

Many fisheries employ fishing lights to manipulate the behaviors of target fish and to attract them toward the light; however, relatively few long-time observations of fish attraction have been performed in the field. Here, an underwater observation deck was used to examine the differences in the fish-attracting effect of light-emitting diode (LED) lights on the number of attracted fish and on their behavior in the field, using white-edged rockfish as the target species. A total of 604 ± 324, 307 ± 203 and 171 ± 106 white-edged rockfish individuals were attracted to the observation window when it was illuminated with …

Inter-Annual Variability In Growth And Maturation Of The Swordtip Squid Uroteuthis Edulis In Yilan Bay Off Northeastern Taiwan, Jing-Yu Chen, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

The swordtip squid Uroteuthis edulis, distributed in the temperate and tropical neritic waters in the Indo-Pacific region, is a crucial component of marine ecosystems and is a target species of fisheries in the Northwest Pacific. Although studies have elucidated the growth and maturation of the squid in the southern East China Sea (ECS) shelf, few have assessed the population biology of the squid in waters in the vicinity of the southern ECS. We collected samples of swordtip squid from a trawler in Yilan Bay (YLB) between January 2011 and December 2012 to examine the growth and maturation of the squid …

Study On The Improved Radiation Boundary Conditions Based On The Quadratic B-Spline Rankine Panel Method, Ming-Chung Fang, Chun-Hsien Wu

Journal of Marine Science and Technology–Taiwan

This study presents a higher-order Rankine source method that is based on a biquadratic B-spline scheme with an improved radiation boundary condition. This method solves flow problems under all conditions, where , including the undercritical condition ( < 0.25); this condition is present when a ship undergoes slow translational motion. The proposed method is thus more flexible than the many Rankine-source models in the literature that are applicable only to the overcritical condition ( > 0.25). Specifically, the improved radiation boundary condition is derived from upstream Seto radiation boundary conditions and by incorporating the Rayleigh damping distribution over a free surface; the improved condition is explicit and efficient for solving flow problems. In evaluations, the proposed method yields accurate solutions for unsteady flows, which are produced by an oscillating, translationally moving submerged singularity. The method is also compared …