Mechanical Engineering Commons^™

Thermal Design And Energy Analysis Of A Greenhouse In Microgravity Conditions, Nivedha Karigiri Madhusudhan

Theses and Dissertations

The recent progress in commercial space flights and prospects for interplanetary space missions has attracted more attention towards developing sustainable built environments in microgravity conditions. An important factor in establishing a sustainable living condition for outer space applications is the ability to produce food. The thermal design considerations in a greenhouse have a major impact on the survival, water efficiency, quantity, and quality of plants produced. The extremely low environmental temperatures necessitate the use of heaters which do consume energy. Given the scarcity of energy access, it is important to achieve proper thermal conditions with the lowest possible energy requirements. …

Dynamic Surface Tension Of Surfactants Through Separation Of Diffusion And Dilation Effects, Brandon Ortiz

UNLV Theses, Dissertations, Professional Papers, and Capstones

Surfactants are biphilic monomers that adsorb to interfaces and have the ability to reduce interfacial tension. From this reduction in interfacial tension, surfactants are able to function as emulsifiers, detergents, and wetting agents among a variety of other things. Despite their ubiquity surfactants and surfactant behaviors, in particular those in highly dynamic environments, are not yet well characterized. In these environments, surfactants undergo significant distortions to droplet, bubble, and foam geometries which induce changes to the surface tension. This establishes a need to understand how surfactants respond to distortions of geometry through diffusion and dilational effects. To address this need, …

Mechanics Modeling Of Non-Rigid Origami: From Qualitative To Quantitative Accuracy, Jiayue Tao

All Dissertations

Origami, the ancient art of paper folding, has recently evolved into a design and fabrication framework for various engineering systems at vastly different scales: from large-scale deployable airframes to mesoscale biomedical devices to small-scale DNA machines. The increasingly diverse applications of origami require a better understanding of the fundamental mechanics and dynamics induced by folding. Therefore, formulating a high-fidelity simulation model for origami is crucial, especially when large amplitude deformation/rotation exists during folding.

The currently available origami simulation models can be categorized into three branches: rigid-facet models, bar-hinge models, and finite element models. The first branch of models assumes that …

Multiple Heat Exchanger Cooling System For Automotive Applications – Design, Mathematical Modeling, And Experimental Observations, Zaker Syed

All Dissertations

The design of the automotive cooling systems has slowly evolved from engine-driven mechanical to computer-controlled electro-mechanical components. With the addition of computer-controlled variable speed actuators, cooling system architectures have been updated to maximize performance and efficiency. By switching from one large radiator to multiple smaller radiators with individual flow control valves, the heat rejection requirements may be precisely adjusted. The combination of computer regulated thermal management system should reduce power consumption while satisfying temperature control objectives. This research focuses on developing and analyzing a multi-radiator system architecture for implementation in ground transportation applications. The premise is to use a single …

Infusing Kirigami Principles Into Design Of Mechanical Properties, Hesameddin Khosravi

All Dissertations

The emergence of mechanical metamaterials — which derive their properties primarily from the underlying architecture rather than the constituent material — has unleashed a new era of material design and functionalities. To fully materialize the promising potentials of metamaterials, it is crucial to develop versatile, scalable, and easy-to-fabricate methods that can both generate and tailor the underlying periodic architecture. To this end, we propose the use of kirigami — a popular recreational art of cutting and manipulating paper — as a platform to create periodicity and super-stretchability. Kirigami has become a design and fabrication framework for constructing metamaterials, robotic tools, …

Development And Characterization Of Forcespinning® Mesquite Gum Nanofibers, Cristobal Rodriguez, Victoria Padilla, Karen Lozano, Alexa Villarreal, Luis A. Materon, Robert Gilkerson

Mechanical Engineering Faculty Publications

In this study, nanofibers incorporating Prosopis glandulosa mesquite gum (MG) exudate combined with biodegradable polymers, pullulan (PL) and chitosan (CH), were produced via the Forcespinning® technique. The nonwoven composite membranes were characterized via scanning electron microscopy followed by thermogravimetric and Fourier-transform infrared spectroscopy analysis. MG nanofiber composites comprised long, continuous fibers with an average fiber diameter of 523 ± 180 nm and 760 ± 225 nm for 18.1 and 28 wt% of MG, respectively. These composite membranes were water-stable after crosslinking via heat treatment with a ∼3 % water absorption capacity, and demonstrated a thermal capability with an increasing …

Review Of Vegetable Nanolubricants For Tribological Applications, Laura Peña-Parás, Martha Rodríguez-Villalobos, Demófilo Maldonado-Cortés, José Andrés González, Ricardo De Jesús Durán, Javier A. Ortega

Mechanical Engineering Faculty Publications

About 40 million tons of lubricants are used every year for various industry purposes and applications, where most of them are petroleum based oils. These oils are difficult and expensive to dispose of, have low biodegradability and are contamination risks. Recent efforts have been focused on reducing the environmental impact of petroleum based lubricants through the use of vegetable oils since they are biodegradable and have good lubricity. A drawback of vegetable oils is their poor thermal stability and oxidation, which causes them to decrease their properties at higher loads. Nanoparticle (NP) additives have been explored for improving the tribological …

Parametric Modeling Of Biomimetic Sharkskin For Wire Edm For Drag Reduction And Hydrophobicity, Joel Maxwell

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This research sets out to demonstrate the viability of parametric modeling for biomimetic sharkskin in the effort to reduce drag and create a self-cleaning surface. Multiple designs were created to be machined by Wire EDM on stainless steel and titanium and were comparatively tested. Limitations of current manufacturing processes to economically produce naturally occurring structures such as sharkskin, emphasize the need to be able to calculate the most accurate design for a given manufacturing process. By designing a simplified but parametrically consistent model compared to an accurately depicted 3D model of sharkskin, the textured samples produced can be further tested …

Prediction Of Meltpool Depth In Laser Powder Bed Fusion Using In-Process Sensor Data, Part-Level Thermal Simulations, And Machine Learning, Grant King

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The goal of this thesis is the prevention of flaw formation in laser powder bed fusion additive manufacturing process. As a step towards this goal, the objective of this work is to predict meltpool depth as a function of in-process sensor data, part-level thermal simulations, and machine learning. As motivated in NASA's Marshall Space Flight Center specification 3716, prediction of meltpool depth is important because: (1) it can serve as a surrogate to estimate process status without the need for expensive post-process characterization, and (2) the meltpool depth provides an avenue for rapid qualification of microstructure evolution. To achieve the …

The Effect Of Zonation, Biofouling, And Corrosion Products On Cathodic Protection Design For Offshore Monopiles, Caglar Erdogan

Theses and Dissertations

Cathodic protection (CP) is required to prevent corrosion of the submerged steel for offshore wind monopile foundations in the marine environment. The design of these systems depends on the environmental conditions, including temperature, salinity, pH, dissolved oxygen, depth, micro- and macro-organisms, and water flow rates. The standards utilized to design cathodic protection systems consider only some of these conditions. This research identified the gaps in knowledge for the design of corrosion prevention systems for offshore wind monopile foundations and investigated the changes in cathodic current densities due to macro-galvanic cells, fouling communities and corrosion products established on uncoated vertical steel …

Tympanostomy Tubes In Children: A Fem Study Of Adverse Effects, Manuel Nicolas Jaramillo Bucheli

Theses and Dissertations

Background: The current study investigates if tympanic (myringotomy) tubes affect hearing by comparing the harmonic displacement response to sound excitation within the hearing frequency range for healthy vs. surgically-treated pediatric tympanic membranes. The use of ear myringotomy tubes has proven an effective method for combating recurrent ear infections in infants and children. These tubes are placed in the tympanic membrane through an incision and connect the middle ear to the external ear, thereby allowing fluid drainage and middle-ear ventilation. While this treatment has been proven beneficial in alleviating urgent pus accumulation in the middle ear, recent research shows that it …

Multi-Fidelity Predictions For Control Allocation On The Nasa Ikhana Research Aircraft To Minimize Drag, Justice T. Schoenfeld

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Optimal control settings (camber scheduling) can be used by aircraft to minimize drag at various operating conditions during flight. In this work, camber schedules for minimum drag on the NASA Ikhana are obtained over a range of lift coefficients. A modern numerical lifting-line algorithm is used to predict the lift and drag of the aircraft as a function of operating condition and wing section shape (airfoil camber). The SLSQP optimization algorithm is used to solve for the camber schedule that minimizes drag for a given operating condition. The process is repeated, varying the number of control sections to evaluate the …

Linearized Rigid-Body Static And Dynamic Stability Of An Aircraft With A Bio-Inspired Rotating Empennage, Austin J. Kohler

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The United States Air Force (USAF) will likely seek to remove the vertical tail of next-generation fighter aircraft. This work seeks to characterize the static and dynamic stability and handling qualities of a vertical-tailless aircraft concept that would satisfy the USAF’s goal. This concept aircraft, one modified with a Bio-Inspired Rotating Empennage (BIRE), does not have a vertical tail, and is instead capable of rotating the horizontal tail about the fuselage axis for maneuvering. The dynamic characteristics of the BIRE-modified aircraft are compared to a baseline unmodified aircraft, similar to the F16, with a traditional vertical tail. Linearized aerodynamic models …

Developing A Methane Detector For Aerospace Applications, Michael A. Kirk

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Greenhouse gasses in the atmosphere are raising the global temperature and causing adverse side effects. Of these greenhouse gasses, methane is one of the most impactful, second only to carbon dioxide. One of the methods for determining the concentration of methane in the atmosphere is taking images of the earth from space. The purpose of this project is to further a new imaging technology for detecting methane leaks called FINIS (Filter Incidence Narrow-band Infrared Spectrometer), thus improving our capability to detect and locate methane leaks and reduce greenhouse gas emissions. FINIS has been developed in various stages since 2018 and …

Mechanoelectrical Behavior In Polyvinyl Chloride (Pvc) Based Soft Polymer Gel Smart Sensors For Soft Robotic Applications, Justin Neubauer

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are a class of electroactive polymer that contain a PVC-based polymeric lattice and various amounts of plasticizer. PVC and plasticizer are industrially available and are commonly used in a wide range of applications including cable insulation, flexible hosing, and healthcare equipment. There are many plasticizer types available, some being extremely biocompatible with implementations in food-safe applications and even food additives for human consumption. Plasticizer weakly bonds to the long polymerized chains of the polymer lattice decreasing the modulus of the composite material. By adding excessive amounts of plasticizer, the bonding sites of these long carbon chains …

Analysis Of Propeller Designs Focusing On Lowering Sound Pressure Level Through Reduced Tip Loading, Luca A. Zeitvogel

Theses and Dissertations

This research focused on potential design optimizations for small propellers. Designs sought to reduce noise generated without sacrificing efficiency by “unloading” the propeller tip by reducing angle of attack near the tip. To see if nearfield performance improvements translated to a reduction in farfield sound pressure level, farfield experimental acoustic testing was performed on propellers that had been measured experimentally in the nearfield. The farfield results provided limited insight due to an equipment malfunction during testing. However, a large data set was obtained, which provides opportunities for future analyses. A computational simulation sought to recreate some of the nearfield experiments …

Solar Chimney Power Plants: A Mini Review, Ahmed Reda, Waseem Salah, Ahmed Suwailem, Shehab Eldin Ahmed, Omar Lasheen, Amira Elkodama, Moustafa R. Shousha, Amr Ismaiel, Anas A. Rahman

Future Engineering Journal

The main investigations of a novel solar thermal application known as SCPP are summarized in this paper. It is a method of producing electricity from solar energy that relies on the fact that air rises when it is heated. An adequate position within a tall chimney can be utilized to position a turbine to turn it, creating an updraft that can be used to generate power. This system's specifications, design, construction, and use are all covered in the paper along with experimental and analytical research related to it. It also emphasizes the development and execution of SCPP programs.

Low-Cost, Low-Weight Test Rig Design For A Laboratory-Scale Twin Rotor Wind Turbine, Ahmed Ayoub, Ahmed Elzeedy, Mahmoud Elkordy, Eslam Ayad, Mohamed Waleed, Amira Elkodama, Amr Ismaiel

Future Engineering Journal

Multi-Rotor Wind Turbine (MRWT) has been proven advantageous over Single-Rotor Wind Turbine (SRWT) in many aspects. In order to study the performance of MRWT over SRWT, this work presents a low-cost and low-weight design for a test rig for laboratory-scale wind turbine configurations. The configurations under study are a single-rotor, and a twin-rotor of the same size with a diameter of 30 cm. Aerodynamic loads have been calculated using the Blade Element Momentum (BEM) method, then the loads were used for stress analysis over the test rig proposed. The test rig is designed on Solidworks and the aerodynamic and inertial …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Characterization Of Materials Properties In Additively Manufactured Aisi-420 Martensitic Steel Deposited By Laser Engineered Net Shaping, Md Mehadi Hassan

Nanoscience and Microsystems ETDs

Metal additive manufacturing (AM) is a disruptive technology enabling the fabrication of complex and near-net-shaped parts by adding material layer-wise. It offers reduced lead production time. AM processes are finding applications in many industrial sectors such as aerospace, automotive, biomedical, and mold tooling. Despite the tremendous advantages of AM, some challenges still prevent this technology's adoption in high-standard applications. Anisotropy and inhomogeneity in the mechanical properties of the as-built parts and the existence of pores and lack-of-fusion defects are considered the main issues in directed energy deposition (L-DED) parts. Laser-engineered net shaping LENS® offers excellent possibilities to fabricate metal tools …

Backpack Effects On Two-Dimensional Gait Spatiotemporal And Kinematic Parameters, Nardo Rizaldy, Alvin Alvin, Wirawan Lingga, Ethan B.W. Goeij, F. Ferryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Loads could affect the body gait in various ways. Backpacks, sling bags, suitcases, and even trolleys could hugely affect human gait without us realizing it. The effects of these loads have been scientifically researched in biomechanics and sports science for the past few years. For instance, the comparison of walking with and without a backpack could easily reveal significant differences in body segments, which could be utilized for therapy and medicine development. The aim of this research is to determine the differences of the spatiotemporal kinematic parameters between a conventional human gait and a backpackloaded gait. Some parameters to be …

Investigate The Potential Renewable Energy Of Microalgae Spirulina Sp Using Proximate Analyzer, Sem-Edx, And Thermogravimetry, Yahya Zakaria, Sukarni Sukarni, Poppy Puspitasari, Nandang Mufti, Samsudin Anis, Anwar Johari

Journal of Mechanical Engineering Science and Technology (JMEST)

Microalgae Spirulina sp which has been cultivated by the Brackishwater Aquaculture Development Center, Situbondo Indonesia were tested for their potential energy performance using proximate analyzer, SEMEDX, and thermogravimetry. The proximate analyzer showed volatile matter (VM), fixed carbon (FC), moisture, ash content (AC), total sulfur of microalgae Spirulina sp 68.15, 12.57, 11.22, 8.06, and 0.67 (wt%, ar), respectively, and the gross calorific value (GCV) is 4971 kcal/kg (dry basis). SEM-EDX test showed the morphology and chemical content of Spirulina sp. The content of microalgae Spirulina sp is dominated by carbon (C) and oxygen (O), then followed by chlorine (Cl), sodium (Na), …

The Effect Of Nozzle Temperature, Infill Geometry, Layer Height And Fan Speed On Roughness Surface In Petg Filament, Doohan Taqdissillah, Aris Zainul Mutaqqin, Mahros Darsin, Dedi Dwilaksana, Nasrul Ilminnafik

Journal of Mechanical Engineering Science and Technology (JMEST)

3D printing is a process of making three-dimensional solid objects from a digital file process created by laying down successive layers of material until the object is created. Many filaments can be used in 3D printing, one of which is PETG (PolyEthylene Terephthalate Glycol). PETG is a modification of PET (PolyEthylene Terephthalate) with added glycol at a molecular level to offer different chemical properties that provide significant chemical resistance, durability, and excellent formability for manufacturing. This study aims to find the most optimal parameter of surface roughness of PETG with different parameters of nozzle temperature, infill geometry, layer height and …

Study On Predictive Maintenance Of V-Belt In Milling Machines Using Machine Learning, Reza Aulia Rahman, Mohammad Faishol Erikyatna, Achmad Fauzan Hery Soegiharto

Journal of Mechanical Engineering Science and Technology (JMEST)

Towards industry 4.0, monitoring the degradation of machine tools’ components becomes a key feature so that smooth productivity is achieved. To preserve the functionality and performance of the machine tools, proper maintenance activities must be planned and carried out. V-belt is important component in machine tools that transmits power from the electric motor spindle in order to machine to work and cut desired material properly. The purpose of this research is to develop a predictive maintenance system for v-belt milling machine Krisbow 31N2F using machine learning. The machine learning algorithm models using multiple and simple linear regression algorithm was developed …

True Stress-Strain Behavior Of Al-Based Cast Automotive Alloy Under Different Ageing Conditions And The Effect Of Trace Zr, Mashiur Rahman Shoummo, Akib Abdullah Khan, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

A thorough investigation has been carried out on the Al-12Si-1Mg-1Cu-1Ni automotive alloy considering different properties, specially mechanical properties associated with true stress and true strain with Zr addition of trace amount. A commercially available piston is melted to produce the alloy, and trace amount of Zr is added to make another. The base alloy along with the Zr added alloy had been applied to homogenization, solution treatment, quenching, and ageing in order to get the age-hardening response. The alloys have been heat-treated at 25 ºC, 200 ºC, and 300 ºC, respectively, for four hours for attaining the under, peak and …

Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) is a widespread, low-cost biopolymer that has generally been produced from plants and biomass waste. A method for improving the range of applications for bacterial cellulose is adding graphene material. It has an outstanding feature that can increase the performance of nanocomposite materials. The research aims to observe the effect of graphene on the surface morphology, crystallinity, chemical bonding, and tensile strength of BC/CuO nanocomposite. For this study's synthesis, BC was synthesized by fermenting pineapple peel extract for 10 to 14 days. The produced BC was crushed, homogenized with a nano homogenizer machine, and filtered. Filtered BC, …

Machine Learning-Based Classification Of Combustion Events In An Rcci Engine Using Heat Release Rate Shapes, Radhika Sitaraman, Sadaf Batool, Hoseinali Borhan, Javad Mohammadpour Velni, Jeffrey Naber, Mahdi Shahbakhti

Michigan Tech Publications, Part 1

Reactivity controlled compression ignition (RCCI) mode offers high thermal efficiency and low nitrogen oxides (NOx) and soot emissions. However, high cyclic variability at low engine load and high pressure rise rates at high loads limit RCCI operation. Therefore, it is important to control the combustion event in an RCCI engines to prevent abnormal engine combustion. To this end, combustion in RCCI mode was studied by analyzing the heat release rates calculated from the in-cylinder pressure data at 798 different operating conditions. Five distinct heat release shapes are identified. These different heat release traces were characterized based on start of combustion, …

Efects Of Non‑Newtonian Viscosity On Arterial And Venous Fow And Transport, Sabrina Lynch, Nitesh Nama, C Alberto Figueroa

Department of Mechanical and Materials Engineering: Faculty Publications

It is well known that blood exhibits non-Newtonian viscosity, but it is generally modeled as a Newtonian fluid. However, in situations of low shear rate, the validity of the Newtonian assumption is questionable. In this study, we investigated differences between Newtonian and non-Newtonian hemodynamic metrics such as velocity, vorticity, and wall shear stress. In addition, we investigated cardiovascular transport using two different approaches, Eulerian mass transport and Lagrangian particle tracking. Non-Newtonian solutions revealed important differences in both hemodynamic and transport metrics relative to the Newtonian model. Most notably for the hemodynamic metrics, in-plane velocity and vorticity were consistently larger in …

Prediction Of Curing Time/Shear Strength Of Non-Conductive Adhesives Using A Neural Network Model, Kyung-Eun Min, Jae-Won Jang, Jun-Ki Kim, Sung Yi, Cheolhee Kim

Mechanical and Materials Engineering Faculty Publications and Presentations

Electronic packaging has been developed with high resolution and fine interconnection pitches. Non-conductive adhesives (NCAs) have been growing with the increase of I/O pad count and density, along with fine pad bond pitch interconnections. Prediction and optimization of NCA characteristics are inherently complicated due to various and extensive materials composing NCAs. In this study, a framework predicting the curing time and shear strength of an NCA is established by a neural network model. NCA formulations with 4 resins, 3 hardeners, 8 catalysts, and a coupling agent were selected from in-house experiments, and an artificial neural network (ANN) with one dense …