Mechanical Engineering Commons^™

Empowering Student Success: Unlocking The Potential Of Project-Based Steel Design Education, Aly Mousaad Aly

Faculty Publications

In the pursuit of student success, it is essential to acknowledge that a singular teaching style does not universally cater to all students. The educator's crucial role lies in creating an optimal learning environment that fosters students' endeavors to excel. This endeavor transcends mere classroom success or employment prospects, encompassing a broader impact on societal well-being. An experiential learning approach, where students actively engage in practical tasks, emerges as the most effective mode of instruction. Integrating project-based learning activities into the curriculum holds immense potential for enhancing student learning. Additionally, the utilization of analysis software tools like FTool and STAAD …

Learning In Transition: Developing And Employing Pedagogical Supports To Enhance Student Learning In Engineering Education, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Scholarly research indicates that classroom environment and conditions influence the degree of student learning, levels of engagement, and overall success in engineering education. In the wake of COVID-19, educational institutions transitioned to fully online delivery that disrupted traditional and effective channels of communication enacted in classroom contexts. For a substantial number of faculty members, this rapid transition to a fully remote instructional context marked the start a novel style of teaching and learning environment, a grand departure from the traditional, direct face-to-face setting. Such rapid and disruptive change required creative solutions to routinized instructional practices and compelling faculty to adjust …

Bend And Not Break: Examining Hispanic Engineering Student's Academic Challenges During Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Student success in higher education remains an area of interest, particularly for underrepresented minorities. Studies reveal that while Latino college enrollment has increased, retention rates continue to be an ongoing struggle. Several factors that attribute to such low rates include academic self-concept, family support, cognitive mapping, managing resources, background characteristics, and separation and maintenance of family ties. In the wake of COVID-19, most institutions responded by terminating in-person instruction, mandating to seek off-campus housing, and shifting to a fully remote context. As such, students were unable to utilize campus resources and engage in established educational campus practices. In this research …

Keeping Calm And Staying Balanced: Exploring The Academic Pressures Faced By Engineering Students To Attain High Grades And Their Impact On Mental Health, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Studies reveal that grades have a short-term impact on students’ self-efficacy, motivation, and decision making. Earning high grades has become a focal point for engineering students to secure three types of opportunities: internships, post-graduation employment, and graduate school acceptance. Nonetheless, the desire to attain a competitive grade-point-average may lead to negative psychosocial effects such as increased mental exertion, physical exhaustion, anxiety, and overall lack of work-life balance. In this paper, the authors extend their prior study on the impact of grades in engineering education. The first study was conducted in the spring of 2019 at a tier one, small private …

Leveling The Playing Field: Enacting Equitable Pedagogy To Teach Rigid Body Dynamics, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Research examining the quality of engineering programs across different instructions of learning has revealed that no two programs are alike. Each program has unique and distinctive features that influence the quality and rigor of education that students receive. Institutional culture, leadership, faculty preparedness, funding and many other factors influence program quality. Additionally, researchers have also noted that many institutional gaps and equity related issues are persistent and troublesome facets that further exacerbate the academic gaps in STEM education. It is within this context, that students attending top tier universities will likely have remarkedly vast academic experiences in terms of level …

Academic Success And Retention Pathway For Mechanical Engineering Major, Paul Akangah, Henry Ivuawuogu, Adeola Morawo, Andrea Nana Ofori-Boadu

Faculty Publications

Evaluating student success in higher education relies heavily on Grade Point Average (GPA), a measure determined by faculty through formative and summative assessments. Faculty determine these grades throughout the student's academic career. Society often equates higher grades with greater intelligence and engagement, assuming students work independently. Grades are also a means to measure or quantify learning and intellectual progress during students' academic careers. However, when students resort to unsanctioned online resources (UORs) using applications like Chegg, Course Hero, and Slader, the student may obtain good grades, but understanding and learning are grossly sacrificed. This study investigates the performance of 100 …

Board 399: The Freshman Year Innovator Experience (Fyie): Bridging The Urm Gap In Stem, Noe Vargas Hernandez, Arturo A. Fuentes, Karen Lozano, Javier A. Ortega, Eleazar Marquez

Mechanical Engineering Faculty Publications

The project focuses on increasing “effective STEM education and broadening participation” in underrepresented minority STEM students at the University of Texas Rio Grande Valley (UTRGV) to successfully face academic and professional challenges, recently exacerbated by the COVID-19 pandemic. The Freshman Year Innovator Experience proposes the development of self-transformation skills in freshman mechanical engineering students to successfully face academic and professional challenges exacerbated by the COVID-19 pandemic while working on two parallel projects of technical design innovation and academic career pathways. The authors will present the work in progress and preliminary results from a pilot implementation of the Freshman Year Innovator …

Advances In Multiagent Systems Control: Multiplex Information Networks-Based Approaches And Beyond, Kimberly Witke

USF Tampa Graduate Theses and Dissertations

Multiagent systems control designs offer numerous advantages to increasingly complex civilian, military, and scientific tasks ranging from intelligent satellite swarm controls or autonomous traffic controls to remote triage and repair or remote wildlife observation, where the performance of a single agent is insufficient to execute the task at hand. Traditional methods in multiagent systems controls, however, have been infeasible for use in scalable, large-group formation controls.

With this in mind, the contribution of this dissertation is to bridge the gap in knowledge through both theoretical and experimental validation of multiagent systems control architectures. It addresses the challenges presented by unreliable, …

Metachronal Locomotion: Swimming, Scaling, And Schooling, Kuvvat Garayev

USF Tampa Graduate Theses and Dissertations

This dissertation deals with one type of underwater locomotion called metachronal swimming in which the organism sequentially beats its multiple appendages allowing phase lag between adjacent neighbors. Metachronally swimming species are widespread and include copepods, shrimp, ctenophores, and tomopterid worms to name few. First, using the high-speed recording and planar particle image velocimetry (PIV) measurement, I report on kinematics of fast metachronal swimmer and constructive vortex interactions among its appendages and discuss its implications for improved performance regarding the swimming. Second, I show how hydrodynamic performance of all metachronal swimmers (paramecia, copepods, tomopterid worms, krill etc.) can be scaled by …

Restoration Of Normal Blood Flow In Atherosclerotic Arteries Promotes Plaque Stabilization, Morgan A. Schake, Ian Mccue, Evan T. Curtis, Thomas J. Ripperda Jr., Samuel Harvey, Bryan T. Hackfort, Anna Fitzwater, Yiannis S. Chatzizisis, Forrest Kievit, Ryan M. Pedrigi

Department of Mechanical and Materials Engineering: Faculty Publications

Blood flow is a key regulator of atherosclerosis. Disturbed blood flow promotes atherosclerotic plaque development, whereas normal blood flow protects against plaque development. We hypothesized that normal blood flow is also therapeutic, if it were able to be restored within atherosclerotic arteries. Apolipoprotein E-deficient (ApoE^-/-) mice were initially instrumented with a blood flow-modifying cuff to induce plaque development and then five weeks later the cuffwas removed to allowrestoration of normal blood flow. Plaques in decuffed mice exhibited compositional changes that indicated increased stability compared to plaques in mice with the cuff maintained. The therapeutic benefit of decuffingwas comparable …

Consumer 3d Printing For Remote Control Aircraft Wings: Development Of Novel Wingbox Structure, Ian Clark

University Honors Theses

Remote control aircraft construction and can be a very expensive and time-consuming hobby. With 3D printer consumer adoption rates skyrocketing, there is a gap between demand for RC aircraft and suitable well-designed models available to creators and hobbyists. By creating and testing two iterations of wingbox geometries, this research aims to help close that gap by producing an easily printable wing structure. While there are improvements that can be made on this work, this research has been effective in generating a novel wingbox structure for FFF 3D printing that has distinct advantages over other designs currently available.

Active Car Spoiler, Kaiden Marouf, Connor Mccabe, Shane Nelson

Mechanical Engineering Senior Theses

This following thesis presents the development and evaluation of an active car spoiler system designed to adjust its angle of attack based on the prevailing driving conditions in real-time. The project aimed to enhance the vehicle's acceleration, handling, and braking, by actively modifying the spoiler's angle of attack to optimize downforce and drag for a variety of driving scenarios. Research was conducted using computational fluid dynamics (CFD) software and vehicle dynamics modeling to collect precise calculations and results for a number of wind speeds. The analysis process incorporated iterative refinement of the airflow around the spoiler considering factors such as …

Aiaa Design, Build, Fly: Aerodynamics, Julian Brown, Victor Bueno Garcia, Kyle Lam, Keaton Viadro

Mechanical Engineering Senior Theses

As part of the Santa Clara University Senior Design Project, the AIAA Design, Build, Fly: Aerodynamics team was responsible for designing and testing the wings, tail, and control surfaces of an aircraft designed to participate in future AIAA Design, Build, Fly competitions. Named Evergreen in honor of professor John J. Montgomery, the unmanned aerial vehicle was designed and constructed in collaboration with the AIAA Design, Build, Fly: Structures and Controls senior design team. Aiming to construct a competitive aircraft for the competition, the team decided that a target weight of approximately 3.5 kg and a cruise speed of 25 m/s …

Aiaa Design, Build, Fly: Structures And Controls, George Simon, Peyton Clark, Gabe Shedid, Jonathan Kleinman

Mechanical Engineering Senior Theses

For their Santa Clara University Senior Design Project, this team chose to create an unmanned aerial vehicle (UAV) with the intent of participating in the AIAA Design, Build, Fly competition. Divided into two subteams, Aerodynamics and Structures & Controls, the teams worked together to model and construct a working prototype aircraft. The Aerodynamics team focused on selecting adequate airfoil and wing dimensions for the main wing and tail through the use of aircraft design software and CFD simulations. Aiming at a cruise speed of approximately 25 m/s, the team decided that the NACA 4416 airfoil would be the most suitable, …

Rhea Breast Pump: Implementation Of Biomimicry Technology, Harper Daniels, Leanne James, Laini Reynolds, Courtney Rowe, Julia Yaklich

Interdisciplinary Design Senior Theses

Rhea Breast Pump is an innovative breast pump that implements biomimicry informed technology for a more efficient and comfortable breastfeeding experience. Our design implements a tongue actuator in conjunction with vacuum to mimic the suckling motion of a baby’s mouth, a heating element for pain alleviation, and a soft flange to maximize comfort. The development of this device is motivated by the goal of empowering women, specifically nursing mothers, to maintain their independence and individuality while raising a family. Our team, consisting of all female engineers, strongly believes in and supports the notion that women can and should have the …

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Stabilization Trajectory And Recovery System For High Altitude Weather Balloon Payloads (S.T.A.R.), Robert Canalas, Aaron Juan, Miles Nguyen, James Oblitas, Anne Paloma

Mechanical Engineering Senior Theses

Of the 657,000 global balloon launches each year, only 20% of payloads are recovered, leading to unsustainable business and environmental practices. This paper details the development and evaluation of the S.T.A.R. (Stabilization, Trajectory, and Recovery) system, which increases the recovery rate of weather balloon sensors by enabling ideal landing conditions. System testing concludes that S.T.A.R. is capable of housing weather sensors in a fully controllable glider capable of targeted landing. If properly scaled up and redesigned for mass production, the S.T.A.R. system increases weather-sensing equipment recovery for weather-reporting institutions around the world. Although the featured iterations consist of basswood, carbon …

Coordinating Tethered Autonomous Underwater Vehicles Towards Entanglement-Free Navigation, Abhishek Patil, Myoungkuk Park, Jungyun Bae

Michigan Tech Publications, Part 1

This paper proposes an algorithm that provides operational strategies for multiple tethered autonomous underwater vehicle (T-AUV) systems for entanglement-free navigation. T-AUVs can perform underwater tasks under reliable communication and power supply, which is the most substantial benefit of their operation. Thus, if one can overcome the entanglement issues while utilizing multiple tethered vehicles, the potential applications of the system increase including ecosystem exploration, infrastructure inspection, maintenance, search and rescue, underwater construction, and surveillance. In this study, we focus on developing strategies for task allocation, path planning, and scheduling that ensure entanglement-free operations while considering workload balancing among the vehicles. We …

Advances In Spacecraft Thermal Control, Sandra K. S. Boetcher, Robert C. Consolo Jr.

Publications

Spacecraft thermal management is critical for ensuring mission success, as it affects the performance and longevity of onboard systems. A comprehensive overview of the state of the art in spacecraft thermal control solutions, as well as a design methodology framework for efficient and effective thermal management, is provided. Various thermal control solutions, including coatings, insulation, heat pipes, phase-change materials, conductive materials, thermal devices, actively pumped fluid loops, and radiators, are discussed along with the primary sources of heat loading in space. The need for accurate modeling and analysis of the thermal environment to identify appropriate thermal control solutions and design …

Uncovering Transient Dynamics And Equilibrium States Of Particle Aggregates With RaúL BayoáN Cal, RaúL BayoáN Cal

PDXPLORES Podcast

In this episode of PDXPLORES, Raúl Bayoán Cal, Professor of Mechanical & Materials Engineering at the Maseeh College of Engineering and Computer Science, discusses his latest National Science Foundation award-winning research, Uncovering Transient Dynamics and Equilibrium States of Particle Aggregates in Fluids, investigating transient dynamics of fluid mechanics in the absence of gravity. These experiments, which utilize the Dryden Drop Tower and research facilities aboard the International Space Station, will benefit the study of granular media in aggregation models such as pollen deposition, algae growth, and plastic pollution.

Click on the "Download" button to access the audio transcript.

Addressing Low Heat Pump Heating System Sales In The Uk, Ben Costelloe

Articles

The replacement of existing fossil fuel boilers with heat pumps is seen as a key measure in the decarbonisation of heating systems and addressing climate change. This policy however, is currently failing in many Western European states, particularly in the UK. The many reasons for this situation are examined. However, the age of UK housing stock and particularly the high number of dwellings built prior to the introduction of building insulation regulations in 1980, are key. To maintain the running cost of air source heat pumps competitive with those of the gas boilers they generally replace the heat pump lift …

Comparative Cutting Fluid Study On Optimum Grinding Parameters Of Ti-6al-4v Alloy Using Flood, Minimum Quantity Lubrication (Mql), And Nanofluid Mql (Nmql), Jaime Taha-Tijerina, Immanuel A. Edinbarough

Informatics and Engineering Systems Faculty Publications

Titanium alloys have been of paramount interest to the aerospace industry due to their attractive characteristics. However, these alloys are difficult to machine and require grinding post-processes for quality assurance of the products. Conventional grinding takes a long time and uses a flood coolant-lubrication technique, which is not cost effective nor environmentally friendly. Several studies have been performed to prove the viability and benefit of using Minimum Quantity Lubrication (MQL) with vegetable or synthetic-ester fluids. This work aims to find the optimum grinding parameters of creep feed grinding Ti-6Al-4V with a green silicon carbide wheel, using a flood lubrication system …

Oxymatrine Loaded Crosslinked Pva Nanofibrous Scaffold: Design And Characterization And Anticancer Properties, Salahuddin Ahmed, Megan Keniry, Narcedalia Anaya-Barbosa, Victoria Padilla, Md Noushad Javed, Robert Gilkerson, Acharan S. Narula, Eman Ibrahim, Karen Lozano

Mechanical Engineering Faculty Publications

This study focuses on the fabrication, characterization and anticancer properties of biocompatible and biodegradable composite nanofibers consisting of poly(vinyl alcohol) (PVA), oxymatrine (OM), and citric acid (CA) using a facile and high-yield centrifugal spinning process known as Forcespinning®. The effects of varying concentrations of OM and CA on fiber diameter and molecular crosslinking were investigated. The morphological and thermo-physical properties, as well as water absorption of the developed nanofiber-based mats were characterized using microscopical analysis, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In vitro anti cancer studies were conducted with HCT116 colorectal cancer …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Flat Plate Solar Collector For A Tiny Home, Clarice Leslie Nicholas

Honors Projects

Pallet Shelter is a company that builds tiny houses for the homeless. We partnered with them to build a solar water heater for their homes so that their tenants can have hot running water. The collector panel sits on the roof of the shelter and absorbs the energy of the sun and uses it to heat water flowing through an array of copper pipes. The hot water is then stored in an insulated tank inside the shelter.

A High-Speed Portable Ground Heat Exchanger Model For Use In Various Energy Simulation Software, Ryan Davies, Matt Mitchell, Edwin Lee

Macalester Journal of Physics and Astronomy

A portable component model (PCM) of a ground source heat pump system was developed and used as a test case in the creating of a PCM development framework. By developing this framework, new building energy simulation models will be able to be easily integrated into existing simulation software such as EnergyPlus and the Modelica Buildings Library. Our model uses a time responsive g-function and numerical methods to simulate ground source heat pumps for single time steps as well as long time scales. We validated our model against GHESim and GLHEPro and found that our model agrees with these two standards …

Fully Coupled Fluid Structure Interaction Simulation Of Bioprosthetic Heart Valves: A Numerical And Experimental Analysis, Masod Sadipour

Electronic Theses and Dissertations

Aortic stenosis impacts approximately 7% of the global population. In the past decade, the role of computational modeling has been becoming considerably important in the design of BHVs. To obtain reliable solutions in computational modeling, it is essential to consider accurate properties of bioprosthetic heart valves (BHVs), such as density and mechanical properties. Previous computational studies assumed (bovine pericardium) BP used in BHVs density was comparable to water or blood. Yet, BP is subjected to multiple treatments like fixation and anti-calcification. In Chapter 2, I measured BP density and its effect on BHV leaflet stress and strain. In the second …

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Recor-Diy, Maxwell W. Ferrer

Industrial and Manufacturing Engineering

RecorDIY is an affordable alternative to ordering Vinyl Records from a manufacturer in the form of an at-home record-cutting lathe. This report will cover the record cutting process from audio to physical, at home record lathes that are currently available, and the possible improvements that I plan to implement in order to make these devices a more viable alternative for small artists. Current models can only create low fidelity records, specifically they struggle with lots of “noise”, extra sounds such as static that make it harder to hear the actual audio. Another issue is record size, as current models can …

Morphology And Hemodynamics Of Cerebral Arteries And Aneurysms In A Rare Pair Of Monozygotic Twins, Hang Yi, Zifeng Yang, Luke C. Bramlage, Bryan R. Ludwig

Mechanical and Materials Engineering Faculty Publications

In this preliminary study, the underlying pathophysiology mechanisms of cerebral aneurysms (CAs) in monozygotic twins (MTs) were investigated via a rare pair of MTs (twin A and twin B) involving four reconstructed arterial models using preclinical information. First, dimensions and configurated outlines of three-perspective geometries were compared. Adopting an in-vitro validated numerical CA model, hemodynamic characteristics were investigated in the MTs, respectively. Despite expected genetic similarities, morphological comparisons show that configurations of cerebral arteries exhibit significant differences between the twins. The ICA size of twin A is larger than that in twin B (2.23~25.86%), varying with specific locations, attributing to …