Mechanical Engineering Commons^™

Investigation Of Topologically Protected Wave Propagation Near Dirac-Like Cones In Acoustic Metamaterials, Md Arif Iqbal Khan

College of Graduate Studies: Theses & Dissertations

This study presents a novel approach to investigate an exceptionally rare acoustic phenomenon – topologically protected wave propagation (TPWP) within a solid-solid domain. While previous research has attempted to unravel the physics behind this phenomenon, most efforts have been grounded in the framework of condensed matter physics and quantum mechanics often requiring complex geometries to realize TPWP in solid-fluid interactions. In contrast, this thesis introduces a geometric tuning method that enables the achievement of TPWP with simpler geometric configurations within a solid-solid domain. Rather than explaining by the quantum trio - quantum anomalous hall effect, quantum valley hall effect, and …

Energy And Empowerment In The High Arctic, Alyssa Pantaleo

Dartmouth College Ph.D Dissertations

National governments continue to depend on fossil fuels for electricity and heat generation in Arctic communities. This dependence threatens the economic, environmental, and cultural sustainability of Arctic communities and subjects them to future volatility and uncertainty. In Greenland, the centralized government structure creates additional challenges for northern communities by limiting the inclusion of local knowledge and priorities in favor of national, standardized solutions. This research identifies pathways towards fossil fuel reduction in northern Greenlandic communities via 1.) analyzing the potential for renewable energy inclusion in grid-scale or residential energy generation and 2.) analysis of the potential for energy reduction in …

A Decision-Making Approach To Reduce The Risk Of Measurement Uncertainty For Product Size, Mostafa Awadalla Sedeek, Fatma Abdallah Elerian, Ossama Badie Abouelatta, Mona. A. Aboueleaz

Mansoura Engineering Journal

The measurement uncertainty has a significant impact on quality control processes. This is particularly true of standards that are assessed to determine if a product is compliant. This ambiguity introduces two potential risks of decision-making: accepting a non-conventional product (the consumer's risk) or rejecting a conventional product (the producer's risk). This investigation explores the potential for false decisions caused by measurement errors in product assessments. By studying data near the control limits, a greater understanding of the manufacturing process is intended to facilitate informed decision-making, and guide the implementation of effective quality control methods. The investigation highlights the importance of …

Minimizing The Production Cost Of The Cam-Follower Profile Using Shape Optimization Techniques, Khaled Ahmed, Magdy Samuel, Rania Mostafa

Mansoura Engineering Journal

The study of shape optimization techniques in structural products helps in reducing mechanical stresses and vibrations in related mechanical elements, such as cam follower mechanisms. This, in turn, has a positive impact on cost savings in the manufacturing process and enhances production quality and reliability. The point of view in this research depends on the idea of minimizing the total production cost while ensuring good functional performance of the cam profile during the shape-manufacturing optimization problem-solving process. The investigation of the impact of changing the motion type of a cam, such as Uniform Velocity Motion (UVM) and Simple Harmonic Motion …

Parametrization Of Fluid Models For Electrical Breakdown Of Nitrogen At Atmospheric Pressure, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

In the transient phase of an atmospheric pressure discharge, the avalanche turns into a streamer discharge with time. Hydrodynamic fluid models are frequently used to describe the formation and propagation of streamers, where charge particle transport is dominated by the creation of space charge. The required electron transport data and rate coefficients for the fluid model are parameterized using the local mean energy approximation (LMEA) and the local field approximation (LFA). In atmospheric pressure applications, the excited species produced in the electrical discharge determine the subsequent conversion chemistry. We performed the fluid model simulation of streamers in nitrogen gas at …

Leveraging Compliance To Design A Minimally Invasive, Expandable Interbody Cage Capable Of Customized Anatomical Fit For Spinal Fusion Surgery, Larry L. Howell, Daniel J. Orr, Anton E. Bowden, Christian Payne, Hailey Jones, Bruce M. Frankel, James Anderson, Alek Sperry, Brandon Sargent

Faculty Publications

As spinal fusion surgery continues to transition to less invasive techniques, there remains an unmet need for ever smaller and more complex interbody cages to meet the unique needs of this difficult surgery. This work focuses on the hypothesis that this need can be met using the inherent advantages of compliant mechanisms in a way no previous device has. Deployable Euler Spiral Connectors optimized using a gradient based optimization algorithm were used as the foundation for a device that can stow to a very small size for device insertion then bilaterally deploy to a substantially larger device footprint. Additionally, a …

Methodology For Designing And Improving Novel Kirigami Patterns Using The Hamiltonian Circuit Framework, Larry L. Howell, Nathan Coleman, Mckaelin Edralin, Specer P. Magleby, Denise Halverson, Zhong You

Faculty Publications

The ability to compactly fold arrays to be deployed in space has seen an increasing demand in the aerospace industry. In this work, we build on existing methods to create kirigami patterns which can stow compactly and deploy out to a predictable shape using Hamiltonian circuits. We detail how designers can use this method to create novel kirigami patterns for a desired deployed shape and area. We also discuss techniques for modifying and improving the behavior and performance of kirigami patterns created using this method, and then show example applications including as a deployable radio frequency antenna of this method …

Ifn-𝜸 And Il-10 Immunosensor With Vertically Aligned Carbon Nanotube Interdigitated Electrodes Toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

Highly sensitive vertically aligned carbon nanotube arrays (VANTAs) interdigitated electrode (IDE) arrays are developed for electrochemical biosensing of two cytokines (i.e., interleukin-10 (IL-10) and interferon-gamma (IFN-𝜸)) that are useful for early detection Johne’s disease (Bovine Paratuberculosis) in cattle. The high aspect ratio VANTA-IDEs (50–60 μm in height) are grown through a chemical vapor deposition process from an iron (Fe) catalyst that is lithographically patterned on a silicon wafer with equal finger width and inter-finger spacing of 25 μm. After functionalization with distinct antibodies the VANTA-IDEs are capable of selective detection of both IL-10 and IFN-𝜸 within an actual biological matrix …

Review Of Computational Models For Large-Scale Mdao Of Urban Air Mobility Concepts, Darshan Sarojini, Marius L. Ruh, Jiayao Yan, Luca Scotzniovsky, Nicholas C. Orndorff, Ru Xiang, Han Zhao, Joshua J. Krokowski, Michael Warner, Sebastiaan Pc Van Schie, Ashley Cronk, Alexandre T. R. Guibert, Jeffrey T. Chambers, Lauren Wolfe, Rachel Doring, Robin Despins, Cibin Joseph, Ryan Anderson, Andrew Ning, Hyunjune Gill, Seongkyu Lee, Zeyu Cheng, Zhi Cao, Chunting Mi, Y Shirley Meng, Christopher Silva, Jiun-Shyan Chen, H. Alicia Kim, John T. Hwang

Faculty Publications

The advent of Urban Air Mobility (UAM) has necessitated a paradigm shift in aircraft design from traditional regression methods to physics-based analysis and the use of modern computational methods. This paper explores the intricacies of UAM aircraft design, acknowledging the limitations of historical empirical equations and advocating for the use of physics-based tools in the early stages of the design process. It underscores the importance of Multidisciplinary Design, Analysis, and Optimization (MDAO) as a means to integrate physics-based tools for conceptual design, facilitating decisions on configuration and sizing. The paper presents a comprehensive survey and review of computational models across …

Review Of The Cavity Effect: Modeling And Impact Of Cavity Shape On Apparent Radiative Surface Properties, Ehsan Mofidipour, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Radiative surface properties play a critical role in the analysis, design, and optimization of thermal systems. Geometry has a strong influence on the emission and absorption characteristics of a surface. Modification of radiative surface properties may be achieved by using engineered surfaces or cavities by capitalizing on the cavity effect. A model for the apparent emissivity of an arbitrarily shaped cavity with spectrally and directionally dependent radiative surface properties is presented in this work. This model is verified through comparison with published models of the apparent radiative properties of cylindrical cavities. The merit of this model is demonstrated by obtaining …

Ifn-𝜸 And Il-10 Immunosensor With Vertically Aligned Carbon Nanotube Interdigitated Electrodes Toward Pen-Side Cattle Paratuberculosis Monitoring, Shaowei Ding, Benjamin J. Brownlee, Kshama Parate, Cicero C. Pola, Bolin Chen, Jesse M. Hostetter, Douglas Jones, John Jackman, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

Highly sensitive vertically aligned carbon nanotube arrays (VANTAs) interdigitated electrode (IDE) arrays are developed for electrochemical biosensing of two cytokines (i.e., interleukin-10 (IL-10) and interferon-gamma (IFN-𝜸)) that are useful for early detection Johne’s disease (Bovine Paratuberculosis) in cattle. The high aspect ratio VANTA-IDEs (50–60 μm in height) are grown through a chemical vapor deposition process from an iron (Fe) catalyst that is lithographically patterned on a silicon wafer with equal finger width and inter-finger spacing of 25 μm. After functionalization with distinct antibodies the VANTA-IDEs are capable of selective detection of both IL-10 and IFN-𝜸 within an actual biological matrix …

Communication Modality And Activity Recognition In Smart Manufacturing, Haodong Chen

Doctoral Dissertations

"Advancements in sensors, computational intelligence, and big data have been rapidly transforming and revolutionizing the manufacturing sector, leading to robot-rich and digitally connected factories. To facilitate such a transformative process, workforce training and coordination between the human workforce and robots have remained a major challenge. This study aims to create intelligent workforce training systems for human-computer interaction and human-robot collaboration. It proposes the use of dynamic gestures and speech commands for seamless communication between a worker and a robot, leveraging Convolutional Neural Networks (CNN) and multiple threading for recognition and integration. Additionally, a fine-grained activity recognition model has been crafted …

Effect Of Ai–Si Coating Weights On Corrosion And Weldability Of Ultra-High-Strength Steel Usiborr 1500 Used In Automotive Structures, Hilary Anayochukwu Onyishi

Doctoral Dissertations

"There has been increased demand for hot-stamped pre-coated Usibor 1500R in automotive industries due to its excellent properties (ultra-high strength, weight reduction, low spring back and excellent corrosion protection). In this research work, investigation was conducted to better understand the effect of Ai-Si Coating Weights on weldability and corrosion of Ultra-High-Strength Steel Usibor 1500R used in Automotive Structures”. The results show that weld nugget diameter increases with increasing weld current, better spot-weld nugget diameter is recorded at weld currents above 7.5 kA for both AS80 and AS150 and the weld current range decreases as the interdiffusion layer (IDL) thickness increases. …

Linear Actuator Using Electromagnetic Brake For Damping Modulation In Physical Human-Robot Interaction, Zahid Ullah

Chulalongkorn University Theses and Dissertations (Chula ETD)

Improving the transparency of high-transmission-ratio linear actuators is essential for enhancing the safety and performance of high-force robotic systems that engage in physical contact with humans in unstructured environments. However, achieving this goal presents significant challenges. A proposed solution for active body weight support systems involves a linear actuator design, combining a high-force unit with an agile, highly back-drivable unit, using an electrorheological-fluid brake. This dissertation introduces an approach that utilizes an electromagnetic (EM) brake with a reduced rotor inertia to address these challenges. The EM brake's increased torque capacity allows for integration with a low-gear-ratio linear transmission. The mini …

ระบบการเรียนปฏิบัติการร่วมกันจากระยะไกลร่วมกับโมเดลภาษาขนาดใหญ่บนเว็บแอปพลิเคชันสำหรับการทดลองสอบเทียบเทอร์โมคัปเปิล, ภูมิรพี เมเยอร์

Chulalongkorn University Theses and Dissertations (Chula ETD)

แม้การระบาดของโควิด-19 จะผ่านพ้นไปแล้ว แต่การพัฒนาและเพิ่มความสามารถของห้องปฏิบัติการระยะไกลให้ทันสมัยและพร้อมใช้งานยังคงมีความสำคัญ งานวิจัยนี้นำเสนอระบบ Telepresence Laboratory ที่รวมการควบคุมการทดลองจากระยะไกลผ่าน Web Application กับการใช้งาน Large Language Model (LLM) เพื่อสร้างผู้ช่วยอัจฉริยะสำหรับการทดลองสอบเทียบเทอร์โมคัปเปิล ระบบนี้สนับสนุนการเรียนรู้ผ่านการคำนวณค่าพารามิเตอร์ ตอบคำถาม และแนะนำขั้นตอนการทดลองในแบบเรียลไทม์ การประเมินระบบครอบคลุมสามด้าน ได้แก่ คุณสมบัติและประโยชน์เปรียบเทียบกับการทดลองแบบดั้งเดิม, ประสิทธิภาพของ LLM ในการสนับสนุนการทดลอง และความพึงพอใจจากผู้ทดลอง ผลการประเมินพบว่าระบบช่วยเพิ่มการเข้าถึง ลดภาระผู้สอน และลดเวลาในการคำนวณ แม้ว่าจะยังมีข้อจำกัดในด้านการมอบประสบการณ์สัมผัสจริงและความล่าช้าในการตอบสนองของ LLM สรุปได้ว่าระบบเหมาะสำหรับการเรียนที่มุ่งเน้นความเข้าใจทฤษฎีและกระบวนการทดลอง แต่ไม่เหมาะสำหรับการเรียนรู้การใช้งานเครื่องมือที่ซับซ้อน

Measurement Of The Local Static Mechanical Pressure Of Earplugs, Luiz G.C. Melo, Ahmed S. Dalaq, Franck Sgard, Olivier Doutres, Laurianne Legroux, Eric Wagnac

Études primaires

Earplugs are used in various critical industrial sectors, such as construction, aviation, military and defense, transportation, and healthcare. However, they present inherent drawbacks, notably discomfort that can lead to inconsistent and incorrect use, thereby leaving a significant proportion of workers vulnerable to irreversible hearing damage, ranging from tinnitus to deafness. This discomfort is closely linked to a physical parameter known as static mechanical pressure (SMP), representing the pressure exerted by earplugs on the earcanal walls. Determining the SMP is crucial for developing earplugs that prioritize comfort. However, experimental studies in this area are scarce and there is no experimental set-up …

Insights Into The Heart Microstructure: A Case Study, Sarah Bulger

Honors Undergraduate Theses

This thesis focuses on better understanding the structures of the heart at the micro-scale. Cardiomyocytes and the branching of cardiomyocytes are of specific interest. A literature review was performed to extract key information on cardiomyocyte size, the branching type and frequency of cardiomyocytes, and cardiomyocytes' organization in general. The purpose of conducting the literature review was to find quantifiable data on the micro-structure of the heart. Three studies in particular provided data on the branching of cardiomyocytes. Two of these studies were conducted on rat hearts, while one other study was conducted on human hearts. The methods and terminology between …

Extrusion-Based Additive Manufacturing Of Magnetic Heat Exchange Structures For Caloric Applications, Vaibhav Sharma

Theses and Dissertations

Currently, the commercial building sector accounts for 18% of total U.S. end-use energy consumption, of which almost a third was from on-site combustion of fossil fuels for space and water heating. Magnetic heat pumping (MHP) technology is an energy-efficient, sustainable, environmentally-friendly alternative to conventional vapor-compression cooling technology. Several MHP designs today are predicted to be highly energy efficient, on condition that suitable working materials can be developed. This materials challenge has proven to be daunting due to issues associated with intricate synthesis/post-processing protocols and complications related to shaping the mostly brittle magnetocaloric alloys into thin-walled channeled regenerator structures to facilitate …

Energy Efficient Spintronic Devices For Non-Volatile Memory And Hardware Ai, Walid Al Misba

Theses and Dissertations

Nanomagnetic devices have emerged as a promising alternative to conventional complementary metal-oxide-semiconductor (CMOS) devices due to their low energy dissipation and inherent non-volatility. However, the widespread adoption of these devices requires high-density, high-speed, reliable, scalable, and energy-efficient technologies. This thesis investigates the use of nanomagnetic memory devices as both conventional Boolean memory and multistate memory for hardware AI applications.

Magnetic tunnel junctions (MTJs) are nanomagnetic memory devices that can be switched reliably and energy-efficiently using stress-mediated switching. However, realistic material inhomogeneity and scalability pose challenges for stress-mediated switching of MTJs scaled to lateral dimensions below 50 nm. We demonstrate that …

Fluid Flow And Thermal Performance Investigation Of Twisted Elliptical Tubes For Use In High Prandtl Number Systems, Connor F. Donlan

Theses and Dissertations

The development of clean energy systems is paramount to reducing mankind's climate impact. These clean energy systems include solar, wind, and nuclear power where nuclear power shows a reduced lifetime carbon dioxide footprint per kilowatt hour compared to other sources [102]. Advanced nuclear reactors, fusion energy systems, and concentrated solar power designers are looking at using molten salt heat transfer fluids and improved heat exchanger design to increase power production and efficiency of clean energy systems. The improving heat transfer within the main heat transfer components within advanced nuclear reactors will enable increased efficiencies and power production.

Heat transfer improvements …

Towards The Automation Of Post-Processing Of Additive Manufacturing Using Collaborative Robots, Logan Schorr

Theses and Dissertations

Despite the incredible potential that collaborative robots have, they are underutilized in several industries that could benefit greatly. These specialized fields, such as additive manufacturing, face challenges that can be solved with the use of robotics, including advanced computer vision, end-effector tooling, and process refinement. My research aims to utilize collaborative robots in an effort to solve the above stated problems, for the specific fields of additive manufacturing. Specifically within this field is the automation of post-processing; this is normally completely manual, as the tools for automation are not sufficiently developed to handle the flexibility required for additive manufacturing. This …

Influence Of Heat Treatment And Shielding Gas Environment On The Very High Cycle Fatigue Behavior Of 17-4 Precipitation Hardened Stainless Steel, Jade Welsh

UNF Graduate Theses and Dissertations

Additive manufacturing (AM) for stainless steel components has proved useful in a variety of industries ranging from aerospace to biomedical engineering. Many of these components are subject to very high cycle fatigue (VHCF) loading and must have tailored mechanical properties to ensure failures do not occur before a service life is reached. Testing the fatigue strength AM materials exposed to VHCF loading is paramount to compare with the expected life cycles of their wrought counterparts. In this thesis, AM 17-4 precipitation hardened (PH) stainless steel (SS) were fabricated using laser powder bed fusion (L-PBF) technique, while the wrought 17-4 PH …

Dynamics Of A 3-D Inlet/Isolator Measured With Fast Pressure-Sensitive Paint, Andrew N. Bustard, Mark E. Noftz, Mitsugu Hasegawa, Hirotaka Sakaue, Joseph S. Jewell, Nicholas J. Bisek, Thomas J. Juliano

Publications

Fast pressure-sensitive paint (PSP) was applied to an inlet/isolator designed using the Osculating Internal Waverider Inlet with Parallel Streamlines (OIWPS) method. The dorsal isolator surface pressure was measured using anodized-aluminum PSP through transparent cast acrylic that makes up the ventral portion of the isolator. Temperature-sensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at Re = 8.5 ×106 /m and 10.2 ×106 /m in the AFOSR–Notre Dame Large Mach-6 Quiet Tunnel (ANDLM6QT) under conventional noise conditions. Flow phenomena, such as shocks originating in the inlet and flow separation at the …

Depressurization Characteristics Of Steam-Based Reciprocating Vacuum Pump, Hongling Deng

Dissertations

This dissertation introduces a novel vacuum technology that leverages low-pressure saturated steam and cooling-controlled condensation, offering an efficient way to utilize low-grade thermal energy sources like waste heat, steam, or solar energy. At the heart of this technology is a unique duo-chamber vacuum pump system, featuring a reciprocating piston and a heat-conductive wall, designed to generate a vacuum through steam-condensation and cooling processes.

The core of this research lies in developing and validating mechanistic models for the steam-condensation depressurization process, a complex phenomenon involving phase change and transport mechanisms. Prior to this work, these mechanisms were not sufficiently modeled or …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev

Technical science and innovation

This article presents the results of an analytical study of the process of loosening and cleaning raw cotton from small debris by pileging working bodies of purifiers, on the basis of which directions for further research were chosen to optimize the parameters of the developed pile drum with spherical piles and rubber strips. Cotton entering production contains impurities. The processes of loosening and cleaning the fiber shreds are key in the initial stages of ginning, as they prepare the raw cotton for ginning and directly affect the reliability, productivity of these processes and the quality of the resulting fiber. Weed …

Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti

Technical science and innovation

Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …

An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov

Technical science and innovation

The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …

Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev

Technical science and innovation

Many traffic flow parameters affect the performance of the road network at high voltage. These are low vehicle speeds, high vehicle distances relative to road capacity, and density per unit time (lane occupancy). In turn, a number of factors affect the decrease in traffic speed: the presence of slow-moving vehicles in the stream; pedestrians crossing the road irregularly; increase in traffic flow, etc. The issues of public transportation depend on many factors, each of which requires a separate approach and a complex solution. In large cities around the world, the quality indicators of public transport services, including the issues of …

Programming A Numerical Model Of Spherical Propagation Of Electric Discharge In Liquid, Mukhiddin Kushshaevich Khudjaev

Technical science and innovation

The subject of research is the determination of the hydrodynamic parameters of a liquid in the process of an electric discharge in a liquid. A numerical algorithm was constructed and a program was drawn up to determine the hydrodynamic parameters of a liquid in the process of an electric discharge in a liquid for a spherical problem. In the numerical solution of the problem, a uniform rectangular grid was used. Some results of computational experiments are presented.