Mechanical Engineering Commons^™

Sic-Cnt Multifunctional Nanocomposites For High Temperature Structural, Thermoelectric And Sensing Applications, Luisa A. Cabrera^, Arifur Chowdhury, Onasis Garcia, Mujibur R. Khan*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Model-Based Systems And Methods For Analyzing And Predicting Outcomes Of Vascular Interventions And Reconstructions, Yuris A. Dzenis, Alexey Kamenskiy, Iraklis I. Pipinos, Jason N. Mactaggart

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods for analyzing and predicting treatment outcomes of medical procedures such as vascular interventions and reconstructions are disclosed. An illustrative system for analyzing and predicting therapeutic outcomes of medical procedures comprises a relational database configured for classifying and storing patient specific input data for multiple patients, a fluid-solid interaction biomechanical model configured for performing a biomechanics simulation and generating biomechanics data, and a graphical user interface.

Mathematical Modeling Of Pipeline Features For Robotic Inspection, Yang Gao

Doctoral Dissertations

Underground pipeline systems play an indispensable role in transporting liquids in both developed and developing countries. The associated social and economic cost to repair a pipe upon abrupt failure is often unacceptable. Regular inspection is a preventative action that aims to monitor pipe conditions, catch abnormalities and reduce the chance of undesirable surprises. Robots with CCTV video cameras have been used for decades to inspect pipelines, yielding only qualitative information. It is becoming necessary and preferable for municipalities, project managers and engineers to also quantify the 3-D geometry of underground pipe networks. Existing robots equipped specialized hardware and software algorithms …

The Search For An Optimal Means Of Determining The Minmax Control Parameter Using Sensitivity Analysis, John Teye Brown

Doctoral Dissertations

The use of computational methods for design and simulation of control systems allows for a cost-effective trial and error approach. In this work, we are concerned with the robust, real-time control of physical systems whose state space is infinite-dimensional. Such systems are known as Distributed Parameter Systems (DPS). A body whose state is heterogeneous is a distributed parameter. In particular, this work focuses on DPS systems that are governed by linear Partial Differential Equations, such as the heat equation. We specifically focus on the MinMax controller, which is regarded as being a very robust controller. The mathematical formulation of the …

Tolerance Limit For Trucks With Excess Load In Transport Regulation In Indonesia, Sigit Pranowo Hadiwardoyo, Raden Jachrizal Sumabrata, Mohammed Ali Berawi

Makara Journal of Technology

Reliability of a road is mandatory since damaged will impede the traffic. Destruction is caused by various factors; one of the most important factors is excess load. Overload may give the load of each axle of a vehicle exceeds the determined standard. This condition occurs in trucks exceeding the load limit. In designing the structure of a road based on the method of Directorate General of Highways Ministry of Public Works of the Republic of Indonesia, axle load calculated in equivalent-number, or known as equivalent axle load (EAL), of 8.16 tons of standard axle. Total equivalent-number over the service life …

Earthquake Damage Intensity Relationship For Residential Houses In West Sumatra, Febrin Anas Ismail, Abdul Hakam, Fauzan Fauzan

Makara Journal of Technology

The Sumatra 30 September 2009 earthquake has damaged hundred thousand buildings in West Sumatra Province. The earthquake is located in 100 km offshore of Padang City, the Capital City of the province. Survey has been conducted to assess the damage of the building in few days after the earthquake. In this survey, the damage of buildings are categorised into 3 level that are heavily, moderate and slightly damages. This paper explores the level damage of building and then the intensity of the shaking in the affected area. Then based on the coordinate of every building location, the buildings are scattered …

Evaluation Of Universitas Indonesia’S Recharge Pond Performance And Potential Utilization For Raw Water Source, Nyoman Suwartha, Resky Agaslian Pramadin

Makara Journal of Technology

Evaluasi Kinerja Waduk Resapan UI dan Potensi Pemanfaatannya sebagai Sumber Air Baku. Waduk resapan Universitas Indonesia (UI) telah dibangun sejak 5 tahun yang lalu. Namun kegiatan monitoring dan evaluasinya sangat minim dilakukan. Tujuan dari studi ini adalah untuk mengetahui laju resapan, dan untuk mengevaluasi kondisi kuantitas dan kualitas air waduk resapan selama musim kemarau dan penghujan. Pengukuran kedalaman muka air, intensitas curah hujan dan penguapan dilakukan untuk menentukan ketersediaan air, laju resapan, dan imbangan air waduk. Sejumlah air permukaan diambil dari waduk resapan dan sungai di tiga titik sampling untuk mengetahui kondisi kualitas air eksisting. Hasil studi menunjukkan tidak ada …

Effect Of Methanol Induction And Incubation Time On Expression Of Human Erythropoietin In Methylotropic Yeast Pichia Pastoris, Adi Santoso, Neng Herawati, Yana Rubiana

Makara Journal of Technology

Erythropoietin (EPO) is a glycoprotein hormone consists of 165 amino acids and has molecular mass of 30,400 Daltons. The large quantities of these hormone required to satisfy clinical demand are currently met by recombinant expression in mammalian cell, namely chinese hamster ovary (CHO). Pichia pastoris has become popular yeast based protein production systems to substitute mammalian expression systems. P. pastoris is capable to use methanol as sole carbon and energy source. In this study, recombinant human EPO (rhEPO) protein obtained by expressing the hEPO gene in methylotropic yeast P. pastoris, strain X33. The present work was carried out to study …

Fuel Saving Strategy In Spark Ignition Engine Using Fuzzy Logic Engine Torque Control, Aris Triwiyatno, Sumardi Sumardi

Makara Journal of Technology

In the case of injection gasoline engine, or better known as spark ignition engines, an effort to improve engine performance as well as to reduce fuel consumption is a fairly complex problem. Generally, engine performance improvement efforts will lead to increase in fuel consumption. However, this problem can be solved by implementing engine torque control based on intelligent regulation such as the fuzzy logic inference system. In this study, fuzzy logic engine torque regulation is used to control the throttle position entered by the driver to achieve optimal engine torque. An engine torque vs. throttle position and engine speed mapping …

An Agri-Food Supply Chain Model To Enhance The Business Skills Of Small-Scale Farmers Using Corporate Social Responsibility, Wahyudi Sutopo, Muh. Hisjam, Yuniaristanto Yuniaristanto

Makara Journal of Technology

In general, small-scale vegetable farmers experience problems in improving the safety and quality of vegetables for supplying high-class consumers in modern retailers. Farmer Group and/or Cooperative (FGC) should be able to assist its members to meet the relevant provisions of modern retail on product specifications, delivery terms, and internal business requirements. This study proposed an agri-food supply chain (ASC) model that involves the corporate social responsibility (CSR) activities to enhance the business skills of the FGC as supplier of modern retailer. Multi-objective optimization programming is developed to determine the amount and timing of supply, level of farmers training skills, quality …

The Solar Thermal Decoupled Electrolysis Of Water Process: An Investigation Of The Electrochemistry In A Base, Jessica Guertin

Symposium on Research and Creative Expression (SORCE)

The solar research team at Valparaiso University is developing solar thermal chemical processes that will transform solar energy into economically viable and reusable energy forms. One subgroup is working on the Solar Thermal Decoupled Electrolysis of Water Process. In this multi-step process, the electrolysis of water to generate hydrogen occurs at room temperature outside of the solar reactor, and it is facilitated by the oxidation of magnetite (Fe3O4) to hematite (Fe2O3). The hematite is then pumped to the solar reactor where it is reduced back to magnetite at high temperatures with the liberation of oxygen. This cycle is then repeated. …

Aircraft Route Optimization For Heterogeneous Formation Flight, Jia Xu, Andrew Ning, Geoffrey Bower, Ilan Kroo

Faculty Publications

We examine the value of extended formation flight in the context of airline operations. The study is based on a bi-level route optimization framework. The aircraft performance model includes the effects of rolled-up wakes, formation heterogeneity, and formation-induced compressibility effects. We incorporate airline economics to understand the trade-off between speed and drag savings in the context of formation flight. The application of formation flight to a representative South African Airlines (SAA) long-haul route network can reduce fuel burn by over 4.6% or reduce direct operating cost by 2.1%. The savings increase to 6.8% in fuel or 2.4% in cost when …

Microstructure Selection Of Sm–Co–Al Alloys To Increase Magnetization, Brian Dick

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An ever increasing demand for higher performing magnets drives the need for new and innovative methods to achieve this goal. Sm-Co rare earth permanent magnets have a unique eutectic microstructure that, through refinement, could become a two-phase magnet which would significantly increase their energy product. The eutectic structure of Sm₈Co₉₂ is comprised of αCo rods embedded within a Sm₂Co₁₇ matrix. If the rods are small enough to encourage exchange coupling and the matrix is smaller than the single domain limit, then an efficient two-phase magnet is created.

Refining the Co rods and matrix size …

Error Reduction And Effect Of Step Size In Adjustment Calculus For Cam Applications, Sai Siddhartha Nudurupati

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Any measurement, however carefully done, will never be free from errors. Similarly, machining of cams for automobiles is prone to contain errors. These errors are naturally a part and parcel of cam manufacturing. The nature of deviations of the manufactured cam profile from the theoretical cam determines its usability. Sometimes, allowable deviations in high speed cams may be in the order of 2540 µm. Larger deviations will disqualify the cams for applications.

Velocity and acceleration of the cam are estimated from the measured displacement of the cam follower during quality control implementation. This data helps in eliminating the unfit cams. …

Development And Recommendations For A Non-Proprietary, High-Tension, Cable End Terminal System, Ryan J. Terpsma

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cable guardrail systems have been increasing in popularity in recent years due to several perceived benefits over the commonly used W-beam guardrail. A non-proprietary design was desired as an alternative to the many proprietary designs available. A non-proprietary, high-tension cable end terminal was necessary to accompany the non-proprietary, high-tension cable guardrail system under development.

The objective of this research project was to develop design recommendations for a non-proprietary, high-tension cable end terminal. An analysis of several cable guardrail end terminals was undertaken to identify any common features that may prove to be beneficial or detrimental to end terminal designs. Next, …

A Nanoporous Silicon Nitride Membrane Using A Two-Step Lift-Off Pattern Transfer With Thermal Nanoimprint Lithography, Bhargav P. Nabar, Zeynep Çelik-Butler, Brian H. Dennis, Richard E. Billo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nanoimprint lithography is emerging as a viable contender for fabrication of large-scale arrays of 5500 nm features. A fabrication process for the realization of thin nanoporous membranes using thermal nanoimprint lithography is presented. Suspended silicon nitride membranes were fabricated by low-pressure chemical vapor deposition (LPCVD) in conjunction with a potassium hydroxide-based bulk micromachining process. Nanoscale features were imprinted into a commercially available thermoplastic polymer resist using a prefabricated silicon mold. The pattern was reversed and transferred to a thin aluminum oxide layer by means of a novel two-stage lift-off technique. The patterned aluminum oxide was used as an etch mask …

Corrosion Rate Of Carbon Steel For Flowline And Pipeline As Transmission Pipe In Natural Gas Production With Co2 Content, Andi Rustandi, Muhammad Adyutatama, Enriko Fadly, Norman Subekti

Makara Journal of Technology

The purpose of this research is to investigate the corrosion rate of carbon steel as flowline and pipeline in natural gas production with CO2 content. The influence of variety of conditions that represent the actual conditions in practice such as CO2 partial pressure and solution composition, particularly NaCl percentage were performed. Research conducted by polarization test and simulation methods using PREDICTTM software. The result of this research is used to illustrate the level of corrosion rate of typical carbon steel i.e. API 5L X-52 occurred in natural gas pipelines due to the effect of dissolved CO2. From the experiments obtained …

Modification Of Flow Structure Over A Van Model By Suction Flow Control To Reduce Aerodynamics Drag, Harinaldi Harinaldi, Budiarso Budiarso, Warjito Warjito, Engkos Achmad Kosasih, Rustan Tarakka, Sabar Pangihutan Simanungkalit, I Gusti Made Fredy Lay Teryanto

Makara Journal of Technology

Automobile aerodynamic studies are typically undertaken to improve safety and increase fuel efficiency as well as to find new innovation in automobile technology to deal with the problem of energy crisis and global warming. Some car companies have the objective to develop control solutions that enable to reduce the aerodynamic drag of vehicle and significant modification progress is still possible by reducing the mass, rolling friction or aerodynamic drag. Some flow control method provides the possibility to modify the flow separation to reduce the development of the swirling structures around the vehicle. In this study, a family van is modeled …

Engineering Innovation And Design For Stem Teachers And The Stem Quality Framework, James Rowley, Sandi Preiss, Margaret Pinnell, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

The backbone of economic growth in the United States relies on engineering innovation. However, engineering innovation cannot occur without engineers and scientists. Unfortunately however, many K-12 students do not have a good understanding of the engineering design process or the vast field of engineering. As a result, many students lose interest in math and science and do not pursue Science, Technology, Engineering and Math (STEM) fields. This paper will describe a unique partnership among the Teacher Education Program and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership initiated with the …

Age, Gender, And Muscle Strength: A Study Based On Indonesian Samples, Henny Henny, Hardianto Iridiastadi, Iftikar Zahedi Sutalaksana

Makara Journal of Technology

Age and gender have been commonly used as a main criterion in accepting a job aplicant, but it is usually not clear how these affect job performance. While a number of recent studies have been done that describe the relationships between age, gender, and participants capacity (e.g., muscle strength), the results have been inconclusive. In Indonesia, in particular, such issues have been rarely investigated, and it is still important to study the issue since the relationships between these factors are population-specific. This study aimed at describing the relationships between age and muscle strength among workers for both genders. Ninety-six male …

Circularly Polarized Microstrip Array Antenna For Ground Segment In Quasi-Zenith Satellite System, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo

Makara Journal of Technology

In satellite communication system, antenna plays an important role. Therefore, the antenna must meet some requirements, such as high gain, circular polarization, and good directivity. In this paper, a four element linear array triangular patch microstrip antenna with cross slot is designed to be used for Quasi-Zenith satellite system. A simulation study as well as experimental study was carried out. The simulation showed that the 3 dB axial ratio bandwidth of 87 MHz (2.569-2.656 GHz) is achieved while the measured results showed 96 MHz (2.556-2.652 GHz). The linear array of 4 element antenna has a gain of 13.73 dB and …

Design Of A Catenoidal Shaped Anechoic Termination, Kyle Myers

Masters Theses

An analytical model is developed in this thesis to predict the reflection coefficient of an anechoic termination consisting of a catenoidal horn connected to a tube lined with absorbing material. The theoretical predictions are compared to experimental measurements on a prototype. Comparisons are made for a variety of arrangements, including, an open horn, and a horn connected to absorbing terminations of two different lengths. The absorbing terminations are either open or closed to the environment and the analytical model can account for both these scenarios. The results indicate that the new model can accurately predict the reflection coefficient for each …

Water Main Break Rates In The Usa And Canada: A Comprehensive Study, April 2012, Steven Folkman

Mechanical and Aerospace Engineering Faculty Publications

Modern societies base their economic prosperity on a standard of living which includes a complex network of infrastructure, both above and below ground. Quality drinking water brought to the tap through elaborate underground distribution systems is a critical component to our public health and economic well-being. In the USA and Canada, it has been the hallmark of our industry and cooperation.

EVIDENCE OF DECLINE

Our water infrastructure is now in decline after decades of service. The signs of distress surface daily as water mains break, creating floods and sink holes. The loss of water service is more than an inconvenience, …

Evaluation Of Ocean-Energy Conversion Based On Linear Generator Concepts, Michael Allen Stelzer

Electrical & Computer Engineering Theses & Dissertations

A turbine generator is a device that converts mechanical rotation into electrical energy. Unfortunately, the primary driving force that has been used to provide this rotation has, thus far, been fossil fuels. Although fossil fuels have proven to be a reliable resource to continually supply the growing demand for electrical power, they are not without their financial and environmental drawbacks. With the continuously increasing demand for energy, it is hypothesized that the world may, in time, exhaust this precious natural resource and/or inflict permanent environmental damage upon our planet.

However, motions that occur in nature, such as ocean waves, can …

Concurrent Engineering Of Tolerance Synthesis And Process Selection For Products With Multiple Quality Characteristcs Considering Process Capability, Mohamad Imron Mustajib

Makara Journal of Technology

The existences of variances that are very difficult to be removed from manufacturing processes provide significance of tolerance to the product quality characteristics target of customer functional requirement. Furthermore, quality loss incurred due to deviation of quality characteristics of the target with a specified tolerance. This article discusses the development of concurrent engineering optimization model of tolerance design and manufacturing process selection on product with multiple quality characteristics by minimizing total costs in the system, namely total manufacturing cost and quality loss cost as functions of tolerance, also rework and scrap costs. The considered multiple quality characteristics have interrelated tolerance …

Pineapple Liquid Waste As Nata De Pina Raw Material, Agus Sutanto

Makara Journal of Technology

This research aims to study the quantity, quality, ecological and economic feasibility of nata de pina production (NP) from pineapple liquid waste (PLW). The design of the study employs complete random design (CRD) with three treatments: PLW without nutrients addition (A), PLW nutrients addition (B), and PLW stored for six months with nutrients addition (C). The nata de pina’s production factors measured were weight, thickness, fiber content, color, brightness, and residual waste. The highest weight was reached in treatment B (899 grams), followed by treatment A (616.4 grams), and C (477.8 grams). The thickness of NP of the height and …

Modeling Of A New Structure Of Precision Air Conditioning System Using Secondary Condenser For Rh Regulation, Aries Subiantoro, Nasruddin Nasruddin, Feri Yusivar, Muhammad Idrus Al-Hamid, Bagio Budiardjo

Makara Journal of Technology

A dynamic mathematical model for a new structure of precision air conditioning (PAC) has been developed. The proposed PAC uses an additional secondary condenser for relative humidity regulation compared to a basic refrigeration system. The work mechanism for this system and a vapour-compression cycle process of the system are illustrated using psychrometric chart and pressure-enthalpy diagram. A non-linear system model is derived based on the conservation of mass and energy balance principles and then linearized at steady state operating point for developing a 8th-order state space model suited for multivariable controller design. The quality of linearized model is analyzed in …

Optimizing Fermentation Medium To Produce Cyclosporin A Using Response Surface Methodology, Rofiq Sunaryanto

Makara Journal of Technology

Response surface methodology (RSM) is a three factorial model which illustrates the relationship between one or more independent variables. RSM can be used to optimize the fermentation medium for the production of Cyclosporin A from the isolate Tolypocladium inflatum. The optimal point of the response surface area is predicted by using a seconddegree polynomial model and applying the statistic model obtained from the central composite design (CCD). The results of optimizing the fermentation medium for Cyclopsorin using the three independent variables of glucose, casein, and KH2PO4 show that all three of the independent variables affect the production of Cyclosporin A. …

The Modified Coastal Storm Impulse Parameter, Sayed Gholamreza Mahmoudpour

Civil & Environmental Engineering Theses & Dissertations

The correlation of the morphological changes to the coast and storm characteristics is among interests of coastal engineers. Better understandings of a storm's potential forces ultimately lead engineers to safer designs and minimize the damages. Therefore, a need to quantify the storm potential forces to a storm parameter is evident. The desired storm parameter is to consider all the relative physical factors and is to present realistic results that then can be proven by actual nature response.

The concept of Coastal Storm Impulse (COSI) parameter was first introduced by Basco and Klentzman (2006) and is based on the conservation of …

Facility Implementation, Production, And Use Of Biodiesel On A University Campus, Michelle Erin Rodio

Doctoral Dissertations and Master's Theses

During the last two years, Embry-Riddle Aeronautical University has been in the process of having a fully-functional biodiesel processing facility on campus. Within this time, it was shown that biodiesel was a great alternative to diesel fuel based on emissions, performance, and cost, allowing for a grant of $10,000 being awarded to fund the project. Upon properly producing biodiesel, the fuel was tested in a John Deere 2653A tractor to see what differences, if any, existed when using a biodiesel blend over diesel fuel. In doing this, carbon buildup and fuel economy were compared, and a cost analysis conducted. It …