Mechanical Engineering Commons^™

Nonoscillatory Central Schemes For Hyperbolic Systems Of Conservation Laws In Three-Space Dimensions, Andrew N. Guarendi, Abhilash J. Chandy

Mechanical Engineering Faculty Research

We extend a family of high-resolution, semidiscrete central schemes for hyperbolic systems of conservation laws to three-space dimensions. Details of the schemes, their implementation, and properties are presented together with results from several prototypical applications of hyperbolic conservation laws including a nonlinear scalar equation, the Euler equations of gas dynamics, and the ideal magnetohydrodynamic equations. Parallel scaling analysis and grid-independent results including contours and isosurfaces of density and velocity and magnetic field vectors are shown in this study, confirming the ability of these types of solvers to approximate the solutions of hyperbolic equations efficiently and accurately.

Coupled Continuum And Molecular Model Of Flow Through Fibrous Filter, Shunliu Zhao, Alex Povitsky

Mechanical Engineering Faculty Research

A coupled approach combining the continuum boundary singularity method (BSM) and the molecular direct simulation Monte Carlo (DSMC) is developed and validated using Taylor-Couette flow and the flow about a single fiber confined between two parallel walls. In the proposed approach, the DSMC is applied to an annular region enclosing the fiber and the BSM is employed in the entire flow domain. The parameters used in the DSMC and the coupling procedure, such as the number of simulated particles, the cell size, and the size of the coupling zone are determined by inspecting the accuracy of pressure drop obtained for …

A Closed-Form Solution For The Similarity Transformation Parameters Of Two Planar Point Sets, Shamsul A. Shamsudin, Andrew P. Murray

Mechanical and Aerospace Engineering Faculty Publications

Image registration covers the set of techniques used in matching images of the same scene. A subset of the image registration problem, identifying the parameters in a similarity transformation, has emerged as useful in a recently defined area of machine design: designing mechanisms for rigidbody shape-change. First, this brief paper shows a potential use for image registration techniques outside the field of machine vision. Second, it presents a closed-form solution for the similarity transformation parameters when the point sets to be matched are restricted to two-dimensional space as is needed in the aforementioned design problem.

Test 2079: John Deere 6140m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2069: Case Ih Steiger 350 Rowtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2058: John Deere 6140d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S950 Case-Ih Farmall 105u, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Laser Assisted Milling Of Difficult To Machine Materials, Gary Kent Hedberg

Open Access Theses

Titanium alloys are well known for their excellent strength to weight ratio and corrosion resistance and is highly sought after in the aerospace industry. Additionally, titanium alloys maintain a high biocompatibility for implants and other medical devices. However, these alloys are notorious for their poor machinability. As the demand for these alloys continue to increase, improved methods of manufacture must be explored. ^ This thesis describes Laser Assisted Milling (LAML) of Ti-6AL-4V (Ti-64) alloys, which studies localized preheating of the workpiece by a laser and characterizes the improvements to the machinability of these metals. Laser parameters are determined based on …

Cold Climate Field Test Analysis Of An Air-Source Heat Pump With Two-Stage Compression And Economizing, Stephen Lance Caskey

Open Access Theses

A Department of Defense project was established to conduct a field demonstration led by Purdue University with several industry partners. The technology investigated was an air-source, two-stage heat pump with closed-loop economizing. The field demonstration site was a military barracks on a National Guard base, Camp Atterbury, in southern Indiana. Two heat pumps were built at the Ray W. Herrick Laboratories and installed into two almost identical, barracks buildings. Data on the heat pump operation and building conditions were to be collected over an entire heating season. Due to complications with the system, the amount of runtime data collected from …

Age-Related Changes To The Production Of Linguistic Prosody, Daniel Richard Barnes

Open Access Theses

The production of speech prosody (the rhythm, pausing, and intonation associated with natural speech) is critical to effective communication. The current study investigated the impact of age-related changes to physiology and cognition in relation to the production of two types of linguistic prosody: lexical stress and the disambiguation of syntactically ambiguous utterances. Analyses of the acoustic correlates of stress: speech intensity (or sound-pressure level; SPL), fundamental frequency (F0), key word/phrase duration, and pause duration revealed that both young and older adults effectively use these acoustic features to signal linguistic prosody, although the relative weighting of cues differed by group. Differences …

Autonomous Orientation And Geolocation Via Celestial Objects, Cheng Liu

Open Access Theses

Based on a hemispherical sensor geometry, a novel celestial navigation system is developed to use celestial objects to determine the absolute location and orientation information without the aid of satellites via two different approaches.

The first approach employs a hemispherical arrangement of light intensity sensors to determine the vector to the dominant light source. We present the sensing system to measure the sun vector via least squares method and achieve the application of a low-cost, small-sized solar compass. The system is shown to work well under ideal conditions but is susceptible to noise and uncertainties in some situations.

The second …

Adaptive Nonlinear Control For Autonomous Ground Vehicles, William Spencer Black

Open Access Theses

We present the background and motivation for ground vehicle autonomy, and focus on uses for space-exploration. Using a simple design example of an autonomous ground vehicle we derive the equations of motion. After providing the mathematical background for nonlinear systems and control we present two common methods for exactly linearizing nonlinear systems, feedback linearization and backstepping. We use these in combination with three adaptive control methods: model reference adaptive control, adaptive sliding mode control, and extremum-seeking model reference adaptive control. We show the performances of each combination through several simulation results. We then consider disturbances in the system, and design …

A Study Of Inkjet Printed Line Morphology Using Volatile Ink With Non-Zero Receding Contact Angle For Conductive Trace Fabrication, Chenchao Shou

Open Access Theses

Inkjet printed lines on a homogeneous solid substrate are studied under the condition that ink evaporation is not negligible and the contact angle exhibits hysteresis with non-zero receding contact angle (NRCA). A new family of line instability is discovered, featured by formation of agglomerations within a line. The agglomeration is explained by a hydrodynamic flow that consistently drives a bead on the substrate towards fresh deposited droplets due to concentration-induced surface tension gradient. Morphologies of lines printed with multiple layers are also explored for the purpose of conductive trace fabrication. A non-uniform morphology is observed across a multi-layer line when …

Operational Modal Analysis And Force Characterization Of An Unstable Liquid Rocket Engine, Kevin Charles Buechele

Open Access Theses

Combustion instability has plagued the rocket industry since its beginnings. It is characterized by sustained pressure oscillations in the combustion chamber due to the coupling of natural pressure fluctuations with unsteady heat release. Typically, combustion instabilities are identified and mitigated during ground testing. Occasionally combustion instabilities do not present themselves until after a system is fielded and may only occur in a flight environment. While ground tests are heavily instrumented, operational flight data may not contain any direct measurement of the combustion forcing function. Post-event efforts to characterize anomalous combustion instabilities with existing instrumentation have had little success.

Accelerometers, which …

Performance-On-Demand Mems (Podmems): Electrical Control Of Effective Mass, Damping, And Stiffness, Shehrin Sayed

Open Access Theses

We propose the use of electrostatic force feedback to control the stiffness, damping, or mass of MEMS. If feedback forces are proportional to sensed displacement, velocity, or acceleration of a MEMS proof mass, then feedback can be used to increase or decrease the apparent stiffness, damping, and or mass of the MEMS. Such feedback can be used to compensate for process variations, packaging stress, thermal drift, viscous damping, etc. Prior efforts by others include position or velocity based feedback for modifying frequency, bandwidth, quality factor, or sensitivity of resonators. We present a means of quantitative control of stiffness, damping, and …

Strategy For Health Monitoring And Fault Detection In Heavy-Duty Diesel Engines, Aniketjayant Vagha

Open Access Theses

Performance tuning, health monitoring, fault diagnosis, etc. are important aspects of testing a pre-production engine out in the field. To fulfill these tasks, a robust data-based strategy for detecting anomalies in diesel engines is proposed in this work. Such a strategy separates the healthy data from outlying, anomalous trends of faulty data. The data classifier used here is based on fundamental principles of statistical learning and derived from linear discriminant analysis.

Further efforts to improve the classification performance led to the finding that steady state data makes for a more accurate classification of the working conditions of individual trucks. Hence …

Health Diagnosis Of Lithium-Ion Battery Cell Using Vibration-Based Test And Analysis, Huan Le Pham

Open Access Theses

With their superior advantages of high capacity and low percentage of self-discharge, lithium-ion batteries, which are most commonly used as power sources for hand-held electronic devices, have become the most popular choice for power storage in electric vehicles. Due to the increased potential for long life of lithium-ion batteries in vehicle applications, manufacturers are pursuing methodologies to increase the reliability of their batteries. Methods are now being developed to monitor the health of lithium-ion batteries throughout their life cycle. The work in this thesis is focused on utilizing non-destructive vibration diagnostic testing methods to monitor changes in the physical properties …

Modeling Of Legged Locomotion With A Suspended Load In The Sagittal Plane, Karna P. Potwar

Open Access Theses

Walking or running while carrying loads has always been a tedious task, more so when the loads are heavy. Such a task of carrying loads not only requires extra effort but also leads to physical pain and in some cases injury. Prior studies on human locomotion with a suspended load have used models that are restricted in their DOFs and so are not able to take into account the fore aft movement in human beings. The objective of this thesis is to model the dynamics of sagittal plane center-of-mass locomotion with a suspended load and apply findings to carrying loads …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

Rotor Blade Operational Data Analysis Methods And Applications For Health Monitoring Of Wind Turbines Using Integrated Blade Sensing, Noah Jacob Myrent

Open Access Theses

Wind energy is one of the fastest growing sources of power production in the world today. In order to extract the maximum potential amount of energy from the wind, a wind turbine's reliability must be a top priority. As utility scale wind turbines increase in size and initial capital investment cost, there also comes an increasing need to monitor the health of the turbine. Currently, most wind turbines do not incorporate blade mounted inertial sensing in addition to blade strain measurements. This approach has the potential to detect inevitable blade damage types early on so that a maintenance schedule can …

Fatigue Behavior And Microstructure Examination Of Aisi D2 Trim Dies, Xinchen Wang

Wayne State University Theses

AISI D2 steels are widely used as tools for forming, drawing and trimming dies due to its high wear resistance, high compressive strength and low distortion, and its performance as a trim die material for cutting ultra-high strength steels (at 1GPa or above) is investigated in this study.

To simulate the production trimming process under a laboratory accelerated fatigue condition, a trim die simulator and testing technique have been developed. In this test 1" cubic die samples were used that offers total 12 cutting edges of 6 different material grain orientations in shearing, and with adjustable die clearance. A non-contact …

Mechanical And Electro-Chemical Investigation Of Carbon Farbric/Epoxy And Aluminum Foam Sandwich Composite Beams, Narin Sara Fatima

Wayne State University Theses

In this study the mechanical and electrochemical response of a sandwich composite comprising of carbon fiber fabric skin and aluminum foam core was evaluated. The three point flexural test was chosen to investigate the mechanical behavior in terms of finding the deformation and failure behavior. The flexural test exhibited an excellent bond between the skin and the core. The specimens mainly failed in three different modes - indentation, core shear and face yielding and showed three distinct regions: a linear rise in load with displacement region, a rapid load drop region and a plateau region followed by a densification region. …

Gaseous Corrosion In Hard Disk Drive: A Computational Study, Hardik Shah

Mechanical and Aerospace Engineering Theses - Archive

HDD is the largest digitally encoded data storage device. HDD is used to store digital data in data centers, computers and laptops. A typical HDD consists of a casing, an actuator arm, actuator axis, head, platters, power connectors, and jumper pins. The platter is made up of non-magnetic material and is covered by magnetic material, which stores the data. The magnetic heads are mounted on a moving actuator arm to read and write the data. One of the modes of failure of a HDD is corrosion. The parts of the HDD are corroded by coming in contact with the contaminants. …

Techno- Economic Analysis Of Wastewater Biosolids Gasification, Jason M. Porter, Nick Lumley, Robert Braun, Tzahi Cath, Ana Prietro, Dotti Ramey, Greta Buschmann

Faculty Publications

Wastewater treatment biosolids, commonly referred to as sludge, is a dilute suspension of micro-organisms, noxious organic matter, and mineral species in up to 99% water. Sludge is produced at about 250 mg/L of mixed municipal and light industrial wastewater treated. Management of this process stream can present a financial and environmental challenge for wastewater treatment plants (WWTPs), accounting for up to 15% of plant energy consumption. Operators of small urban WWTPs see the greatest challenge as their operations do not benefit from economies of scale, which permit larger facilities to absorb the costs or footprint of anaerobic digestion. This work …

Electrochemical Explanation For Asymmetric Electrowetting Response, Mehdi Khodayari, Nathan B. Crane, Alex A. Volinsky

Faculty Publications

In electrowetting, a droplet/substrate contact angle is modulated by applying a potential difference between the droplet and the substrate. Typically, the droplet potential is changed via an auxiliary electrode dipped in the droplet. Here, it is shown that electrochemical reactions lead to a potential drop on the auxiliary electrode in electrowetting, which degrades the droplet contact angle modulation. The magnitude of this effect depends on the voltage polarity. This problem can be addressed by using a dielectric layer, such as SiO2, which can prevent electrochemical reactions with the electrowetting substrate and the auxiliary electrode.

Effect Of Doping On Β-Tricalcium Phosphate Bioresorbable Bulk Material And Thin Film Coatings, Suhaila Abdalla

Dissertations

Magnesium has emerged as a revolutionary biodegradable metal for use as an orthopedic material, it has several advantages over the permanent metallic materials currently in use, including eliminating the effects of stress shielding, improving biocompatibility and degradation properties, thus removing the requirement of a second surgery for implant removal. Due to the rapid degradation of magnesium, it is necessary to control the corrosion rates of the materials to match the rates of bone healing. This dissertation reports on the effect of doping on the properties of β-tricalcium phosphate (β-TCP). It also reports on its application as a thin film coating …

Multiphase Hydrodynamics In Steady And Pulse Jet Mixing Systems, Ibraheem R. Muhammad

Dissertations

The goal of the present study is to evaluate the mixing performance of jet mixers in both liquid and solid-liquid mixing processes. Jet mixers have been studied for decades for its uses in liquid blending and solid-liquid mixing applications. In solid suspension processes, jet mixers can be just as useful if not more useful than conventional impeller mixers. However, there is a lack of phenomenological models that exist. The erosion and subsequent suspension of solids beds, as well as the suspension of a low concentration of solid particles must be better understood. The specific objectives were to develop analytical, experimental …

Cavitation In Pharmaceutical Manufacturing And Shipping, Donn Sederstrom

Electronic Theses and Dissertations

Therapeutic proteins are used to successfully treat hemophilia, Crohn's Disease, diabetes, and cancer. Recent product recalls have occurred because of sub-visible particle formation resulting from the inherent instability of proteins. It has been suggested that particle formation is associated with late stage processing steps of filling, shipping, and delivery. Previous work at the University of Denver demonstrated that fluid cavitation can generate a large number of sub-visible protein particles in ultra clean formulations, but that mitigation can be achieved with fluid property manipulation. The goal of this research was to (1) assess the risk of cavitation under common pharmaceutical manufacturing …

Developing A System For Blind Acoustic Source Localization And Separation, Raghavendra Kulkarni

Wayne State University Theses

This dissertation presents innovate methodologies for locating, extracting, and separating multiple incoherent sound sources in three-dimensional (3D) space; and applications of the time reversal (TR) algorithm to pinpoint the hyper active neural activities inside the brain auditory structure that are correlated to the tinnitus pathology. Specifically, an acoustic modeling based method is developed for locating arbitrary and incoherent sound sources in 3D space in real time by using a minimal number of microphones, and the Point Source Separation (PSS) method is developed for extracting target signals from directly measured mixed signals. Combining these two approaches leads to a novel technology …

Ion Current Signal Detection During Cold Starting And Idling Operation In A Diesel Engine, Sanket Anil Gujarathi

Wayne State University Theses

Cold starting of diesel engines is characterized by inherent problems such as long cranking periods and combustion instability leading to an increase in fuel consumption and the emission of high concentrations of hydrocarbons which appear as white smoke. Accordingly, a signal indicative of combustion during cold starting and idling operation is important for combustion and emission control. The ion current signal has been considered for the feedback control of both gasoline and diesel engines. However, the ion current signal produced from the combustion of the heterogeneous charge in diesel engines is weaker compared to that produced from the combustion of …