Mechanical Engineering Commons^™

Analyzing Requirement Type Influence On Generated Solutions, Emily Worinkeng

All Theses

Several ideation methods are available and used by engineering designers to enable the generation of alternative designs [1]. However, there has been little work done to understand the role that the design problem given to participants plays in the ideation process. The contribution of this research is found through the proposed guidelines with respect to the type of requirements to include as part of the design problem in order to achieve the desired quantity, quality, novelty, and variety of solutions during the early stages of the design process. This work is the first attempt at analyzing the effect of requirement …

A Study Of Gallery Method To Increase Idea Quality In Conceptual Design, Liz Mathew

All Theses

The objective of this research is to evaluate whether gallery method increases idea quality in conceptual design for engineering design problems. The gallery method is a group ideation process which allows individuals to first generate ideas individually, followed by pooling of ideas to conduct group ideation. Design engineers are often encouraged to work in groups to generate concepts and solutions for design problems. However, past research argues that individual ideation results in higher quality design concepts compared to the group ideation methods. The limitations of group ideation such as free riding, production blocking, evaluation apprehension, and goal incongruity are identified …

An Exploratory Study On The Effects Of Goal Alignment, Interventions, And Motivational Factors On Innovative Engineering Design Projects, Blake Linnerud

All Theses

Innovation has become an important facet of engineering design, both in industry and the academy. Many senior-level engineering design courses encourage students to develop innovative solutions to open design projects from industry sponsors. Like industry, these academic problems are tackled by teams of students. Student teams that function at the highest level are more likely to reach the innovative solutions for which they are searching. The research presented in this work focuses on two main areas: (1) understanding what motivates engineers when working on innovative design projects and (2) determining the effects of goal alignment interventions on design teams working …

Knowledge Extraction From Work Instructions Through Text Processing And Analysis, Abhiram Koneru

All Theses

The objective of this thesis is to design, develop and implement an automated approach to support processing of historical assembly data to extract useful knowledge about assembly instructions and time studies to facilitate the development of decision support systems, for a large automotive original equipment manufacturer (OEM). At a conceptual level, this research establishes a framework for sustainable and scalable approach to extract knowledge from big data using techniques from Natural Language Processing (NLP) and Machine Learning (ML). Process sheets are text documents that contain detailed instructions to assemble a portion of the vehicle, specification of parts and tools to …

Effects Of Iteration On Concept Development, Shivraj Ranganathan

All Theses

Iteration in the conceptual design stage is defined as repetition of design tasks to incorporate new information. A more concise definition of iteration relevant to this research would be the progression of design through different abstraction levels or design stages, defining and refining design solutions while progressing from initial concepts to a more detailed design. Although it is believed that iteration has a positive effect on the quality of ideas in the design process, this experimental study presents an opportunity to determine the effects of iteration on quality of concepts and the factors that lead to increased quality of concepts. …

Knowledge Base Representation With Axiomatic Design Rules For Concept Level Up Implement In Ontological Framework, Zhuochen Shi

All Theses

Axiomatic Design has been applied and developed as a tool, offering a scientific basis for design and improving design activities. Axiomatic Design has been used in various fields such as software system design, structure design, and product design. However, several challenges and limitations exist in Axiomatic Design including: the inconsistency in identifying design parameters, existence of coupled design, and multiple groups of functional requirements and design parameters. Aimed at using Axiomatic Design to generate conceptual solutions in engineering design while overcoming its limitations, a formal ontology is developed. The ontology defines functional requirements, design parameters, concepts, components and variables and …

Implementation And Analysis Of A 1.4l Turbo Liquid Cooled Cac And Ac Condenser System, Mitchell Zajac

Masters Theses

This project report serves as a continuation and finalization of an overall experience with the design process including working on the development of system components, working with automotive industry leaders, suppliers and dealing with the aspects of business and production feasibility. The development of a dual level cooling concept to apply Centro Richerche Fiat established components on a Chrysler Group vehicle application was the foundation of the design project completed in December 2012 by Matt Cutler and Mitch Zajac. The development of this system aimed to decrease overall vehicle power consumption, minimize overall system packaging space, and to increase vehicle …

Effects Of Time Varying Background Noise Conditions On Human Perception And Performance, Andrew H. Hathaway

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This thesis was designed to study the effects of changing noise conditions on human perception and performance. In two phases, participants were exposed to a number of noise conditions and their performance on an arithmetic task involving short-term memory was monitored and their subjective perception of noise conditions was collected via questionnaires.

In the first phase, participants were tested while being subjected to RC-29(H) and RC-47(RV) conditions created by broadband noise fluctuating on different time intervals, resembling the changing noise conditions potentially found in modern HVAC systems. These intervals varied from two minutes to ten minutes. Results show a significant …

Experimental Investigation Of The Active Flow Control On A Two-Dimensional Wind Turbine Airfoil, Guannan Wang

Dissertations - ALL

Wind turbine blades experience unsteady aerodynamic loading under various off-design conditions. The fatigue loading reduces the operational time of the wind turbine hence leads to an increase in the Cost of Energy (CoE) of the wind power. In this study, active flow control with unsteady blowing actuators was applied to a two-dimensional wind turbine airfoil to alleviate the unsteady aerodynamic loading and improve the aerodynamic performance, particularly under large scale freestream disturbances. A low speed, open jet aeroacoustic wind tunnel was designed and constructed based on an existing anechoic chamber for this investigation. A theoretical analysis based on a Blade …

In-Bottle Wine Aerator, Kevin Kesler, Patrick Lowry, Paul Woolworth

Mechanical Engineering

The proposal for Capitol Cultivators discusses and evaluates the development of an in-bottle wine aerator. It defines the problem and need for an aerator located inside the wine bottle. Additionally, it outlines requirements essential for an effective design and describes the engineering process that will be followed.

Design Of An Automatic Wood Trimming Machine, Van Ho, Nicholas Maskal, Andrew Rutland

Mechanical Engineering

This final design report, prepared for Sunrise Arts by the Cal Poly design team Mahogany Automation, details the year-long process in which the team of three engineering students designed and built an automated wooden -plank edge trimming machine that incorporates anti-jamming and continuous loading features. The team has examined current woodworking machines and features available on the industrial and commercial market, and used these as guides along with device requirements set by the project sponsor, Bruce Palmer. The focus has been on designing the simplest and most cost effective device that allows operators to make production runs of wooden slats …

Peripheral Artery Catheter Tracking System, Chris Blecher, Michael Lashore, Nhan Le

Mechanical Engineering

No abstract provided.

Rifle And Shotgun Recoil Test System, Benjamin Canfield-Hershkowitz, Trevor Foster, William Meijer

Mechanical Engineering

No abstract provided.

Trampoline And Bungee Fatigue-Test Machine, Andy Brock, Christopher D'Elia, Ryan Murphy

Mechanical Engineering

JumpSport, a Saratoga based recreational and fitness trampoline company, sponsored this senior project team towards the development of a fatigue-testing machine. The goal of this project was to iterate the previous machine JumpSport used for bungee cord, spring, and trampoline fatigue testing. Since minimal study had been conducted on these specific bungee cords, the fixture was designed to confirm the theoretical correlations for rubber and perform the final tests according to a strict protocol. Operating with a specific test protocol in mind will allow the data from multiple tests to be combined and analyzed statistically. With a design concept in …

Sodhana Environmental - Final Design Report, Eric Taylor, Corissa Bellis, Cody Perez, Cameron Zeller

Mechanical Engineering

A fully designed cost-effective, sustainable, toilet for the developing world.

Otto - The Wall Driving Platform, Cameron Venancio, Eric Mar, Kelvin Lei

Mechanical Engineering

A robotic wall-climbing robot.

Characterization Of Polyetherimide Under Static, Dynamic, And Multiple Impact Conditions, Bryan Zuanetti

HIM 1990-2015

The application of polymers in robust engineering designs is on the rise due to their excellent mechanical properties such as high fracture toughness, specific strength, durability, as well as, thermal and chemical resistances. Implementation of some advanced polymeric solids is limited due to the lack of available mechanical properties. In order for these materials to endure strenuous engineering designs it is vital to investigate their response in multiple loading rates and conditions. In this thesis, the mechanical response of polyethermide (PEI) is characterized under quasi-static, high strain rate, and multiple impact conditions. Standard tension, torsion, and compression experiments are performed …

Fracture Toughness Of A Hyperelastic Material During Surgical Cutting, Kevin Smith

HIM 1990-2015

Despite being one of the most important organs of vertebrates, the material properties of skin are also one of the most poorly understood. In the field of designing medical devices and surgical tools there are significant advantages to having a model that describes the interaction of forces between a blade tip and skin during surgical cutting. In general, skin can best be described as a composite layer consisting of a viscoelastic dermis with interwoven collagen and elastin fibers beneath a superficial epidermis. The purpose of this research is to study the fracture toughness of porcine skin during practical cutting applications, …

Development And Validation Of An Absorption Sensor For Time-Resolved Measurements Of Co And Co2, Kyle Thurmond

HIM 1990-2015

A sensor was developed for simultaneous measurements of carbon monoxide and carbon dioxide fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact LEDs that emit in the 3-5[micro]m wavelength range which are more appropriate for practical applications than the more traditionally used lasers. An affordable, fast response sensor that can measure these gases has broad application that can lead to more efficient, fuel flexible engines and regulations of harmful emissions. LEDs have a more spectrally broad and diverging emission than lasers which presented many design challenges. The optical design software ZEMAX was utilized to overcome these …

Waveguiding Of Surface Phonon Polariton, Franklin Manene, Brian A. Lail, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metal losses lead to unacceptably low propagation lengths in THz and LWIR waveguides. While SPP based waveguides provide relatively good confinement and attenuation in the near-IR and visible these are insufficiently bound to the surface in the THz and LWIR. We study using surface phonon polaritons for waveguiding at these frequencies. An eigenmode approach was applied to model a hybrid waveguide structure at λ=10.6 μm. The results show that phonon-coupled hybrid waveguide of silicon carbide BCB and gold exhibit enhanced propagation length and confinement at LWIR. © 2013 IEEE.

Burnout, No, Flame Temperature, And Radiant Intensity From Oxygen-Enriched Combustion Of A Hardwood Biomass, Joshua David Thornock

Theses and Dissertations

Increasing concern for energy sustainability has created motivation for the combustion of renewable, CO2 neutral fuels. Biomass co-firing with coal provides a means of utilizing the scaled efficiencies of coal with the lower supply availability of biomass. One of the challenges of co-firing is the burnout of biomass particles which are typically larger than coal but must be oxidized in the same residence time. Larger biomass particles also can increase the length of the radiative region and alter heat flux profiles. As a result, oxygen injection is being investigated as a means of improving biomass combustion performance.An Air Liquide designed …

Emg-Emg Coherence Analysis Of Elbow And Shoulder Muscles, Manu Stephen

All Theses and Dissertations (ETDs)

Motor coordination can be described by the activation of a few intermuscular coordination patterns, or muscle synergies. Muscle synergy can be defined as a relatively fixed pattern of activation across a set of muscles. The neural mechanisms underlying muscle synergies remain to be fairly unknown. Through a muscle synergy study [13], co-activation in muscle pairs was discovered through a non-negative matrix factorization: NMF) analysis. In order to evaluate the same muscles under the frequency domain, coherence analysis: a correlational method) was used. Additionally, a comparison can be made to determine if the resulting muscle pairs overlap with the muscle pairs …

Kinematic Synthesis Of Planar, Shape-Changing, Rigid Body Mechanisms For Design Profiles With Significant Differences In Arc Length, Shamsul A. Shamsudin, Andrew P. Murray, David H. Myszka, James P. Schmiedeler

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a kinematic procedure to synthesize planar mechanisms capable of approximating a shape change defined by a general set of curves. These “morphing curves,” referred to as design profiles, differ from each other by a combination of displacement in the plane, shape variation, and notable differences in arc length. Where previous rigid-body shape-change work focused on mechanisms composed of rigid links and revolute joints to approximate curves of roughly equal arc length, this work introduces prismatic joints into the mechanisms in order to produce the different desired arc lengths. A method is presented to iteratively search along the …

Mass Production Of Β-Silicon Carbide Nanofibers By The Novel Method Of Forcespinning, Alfonso Salinas

Theses and Dissertations - UTB/UTPA

Non-oxide Ceramics such as silicon carbide have very unique properties, for example high toughness, thermal stability, wear resistant, and thermal shock resistance these properties make these ceramic fibers excellent for high temperature applications. Here we present the development of Silicon Carbide nanofibers utilizing a Polystyrene/Polycarbomethylsilane solution as the precursor materials. The Forcespinning ® was performed under a controlled nitrogen environment to prevent fiber oxidation. Characterization was conducted using scanning electron microscopy, x-ray diffraction, and thermogravimetric analysis. The results show successful formation of high yield, long continuous bead-free nanofibers with diameters ranging from 280nm to 2 micron depending on the selected …

Analytical Solutions For A Large-Scale Long-Lived Rotating Layer Of Fluid Heated Underneath, Pouya Jalilian

Masters Theses

In this work, the system of equations for a large- scale long lived rotating layer of fluid with the deformable upper free surface and non-deformable lower free surface heated underneath has been reviewed and derived. The quasi-geostrophic approximation, the beta effect and the method of multi-scale expansions have been employed to and as a result, an equation governing the evolution of large-scale perturbations, has been derived. The effect of each term present in the upper surface deformation equation has been analyzed and the analytical solutions have been obtained by virtue of employing auxiliary Riccati equation method. The soliton solutions obtained …

Constant Voltage Hot-Wire Anemometry For The Boundary Layer Data System, Hon Yee Li

Master's Theses

To continue the development of the Boundary Layer Data System (BLDS), a constant voltage hot-wire anemometer (CVA) is implemented into the BLDS for flight-testing. The hot-wire anemometer was chosen as an alternative to the traditional pressure probe because of the ability to measure both average velocity and fluctuating velocity within the boundary layer. Previous work done on the benchtop has led to the design of miniaturization, flight-capable hardware for the BLDS. The next step in the development of the BLDS – CVA calls for quantifying the accuracy of the boundary layer measurements measured by the CVA system. To do this, …

Large-Displacement Lightweight Armor, Eric C. Clough

Master's Theses

Randomly entangled fibers forming loosely bound nonwoven structures are evaluated for use in lightweight armor applications. These materials sacrifice volumetric efficiency in order to realize a reduction in mass versus traditional armor materials, while maintaining equivalent ballistic performance. The primary material characterized, polyester fiberfill, is shown to have improved ballistic performance over control samples of monolithic polyester as well as 1095 steel sheets. The response of fiberfill is investigated at a variety of strain rates, from quasistatic to ballistic, under compression, tension, and shear deformation to elucidate mechanisms at work during ballistic defeat. Fiberfill’s primary mechanisms during loading are fiber …

Development And Validation Of A Human Hip Joint Finite Element Model For Tissue Stress And Strain Predictions During Gait, Jeffrey D. Pyle

Master's Theses

Articular cartilage degeneration, called osteoarthritis, in the hip joint is a serious condition that affects millions of individuals yearly, with limited clinical solutions available to prevent or slow progression of damage. Additionally, the effects of high-risk factors (e.g. obesity, soft and hard tissue injuries, abnormal joint alignment, amputations) on the progression of osteoarthritis are not fully understood. Therefore, the objective of this thesis is to generate a finite element model for predicting osteochondral tissue stress and strain in the human hip joint during gait, with a future goal of using this model in clinically relevant studies aimed at prevention, treatment, …

Investigation Of Compressed Air Energy Storage Efficiency, James W. Keeney

Master's Theses

This study investigates Compressed Air Energy Storage (CAES) application in the

electrical power and transportation industries. Information concerning current CAES projects is

presented. A thorough thermodynamic analysis of the CAES process is completed; including

theoretical efficiency determination for several variants of the compression and expansion

processes. Industry claimed efficiencies ranging from 26% to 82% are presented and explained.

Isothermal and Isentropic efficiency baselines are developed. Energy density of compressed air

on both a mass and volume basis is compared to other energy storage methods. Best expected

efficiency of a hypothetical CAES system is determined to be 34% using currently achievable …

Enhancing Energy Efficiency In Connected Vehicles Via Access To Traffic Signal Information, Grant Mahler

All Dissertations

This dissertation expounds on algorithms that can deterministically or proba-bilistically predict the future Signal Phase and Timing (SPAT) of a traffic signal by relying on real-time information from numerous vehicles and traffic infrastructure, historical data, and the computational power of a back-end computing cluster. When made available on an open server, predictive information about traffic signals’ states can be extremely valuable in enabling new fuel efficiency and safety functionalities in connected vehicles: Predictive Cruise Control (PCC) can use the predicted timing plan to calculate globally optimal velocity trajectories that reduce idling time at red signals and therefore improve fuel efficiency …