Mechanical Engineering Commons^™

An Interactive Product Development Model In Remanufacturing Environment: A Chaos-Based Artificial Bee Colony Approach, Vishwa V. Kumar

Masters Theses

"This research presents an interactive product development model in re-manufacturing environment. The product development model defined a quantitative value model considering product design and development tasks and their value attributes responsible to describe functions of the product. At the last stage of the product development process, re-manufacturing feasibility of used components is incorporated. The consummate feature of this consideration lies in considering variability in cost, weight, and size of the constituted components depending on its types and physical states.

Further, this research focuses on reverse logistics paradigm to drive environmental management and economic concerns of the manufacturing industry after the …

Characterization Of 304l Stainless Steel By Means Of Minimum Input Energy On The Selective Laser Melting Platform, Ben Brown

Masters Theses

"Developing parameter sets for new materials on the Selective Laser Melting (SLM) platform has traditionally been done through the use of single line processing windows and a basic design of experiments (DOE) which would include varying machine parameters to maximize density. This study expands the traditional method by determining the main effects statistically for density, allowing for a more in depth analysis wherein the experimental results are statistically correlated to the variable machine parameters used. With this analysis, parameter optimization with respect to achieving near full density, while also considering build rates, can be performed. New parameters for 304L stainless …

Performance Evaluation Of Coaxial Horizontal Axis Hydrokinetic Turbines System, Abdulaziz M. Abutunis

Masters Theses

"Hydrokinetic energy technologies are emerging as a viable solution for renewable power generation. Unlike conventional hydropower turbines, hydrokinetic turbines are environmentally friendly; they operate at zero-head, and do not need dams to preserve the water. Unfortunately, they have a low efficiency which makes their design a challenging task. This work was focused on the hydrodynamic performance of horizontal axis hydrokinetic turbines (HAHkTs) under different turbine arrangements and flow conditions.

It was undertaken in an effort to improve the efficiency of small HAHkTs that harness a river's kinetic energy. Four sets of experiments were performed in a water tunnel to investigate …

Performance Analysis Of Cutting Graphite-Epoxy Composite Using A 90,000 Psi Abrasive Waterjet, Aiswarya Choppali

Masters Theses

"Graphite-epoxy composites are being widely used in many aerospace and structural applications because of their properties: which include lighter weight, higher strength to weight ratio and a greater flexibility in design. However, the inherent anisotropy of these composites makes it difficult to machine them using conventional methods. To overcome the major issues that develop with conventional machining such as fiber pull out, delamination, heat generation and high tooling costs, an effort is herein made to study abrasive waterjet machining of composites. An abrasive waterjet is used to cut 1" thick graphite epoxy composites based on baseline data obtained from the …

Machinability Improvement During High-Speed End-Milling Of Inconel 718 Alloy, Chukwujekwu Nnadi

Masters Theses

“This thesis presents the results of the experimental investigation of the effects of machining parameters (spindle speed and feedrate) and cooling strategies [Minimum Quantity Lubrication (MQL), Cryogenic Liquid Nitrogen (LN₂), and combined (MQL+LN₂)] on cutting force components, cutting temperature, tool wear and surface roughness during high-speed slot end-milling of Inconel 718 alloy. In addition, a comparative evaluation of the three cooling strategies was conducted for cutting force components, surface roughness and residual stresses. All end-milling experiments were conducted on a Cincinnati Milacron Vertical Machining center (VMC), using a 0.5 inch (12.7 mm) diameter, 0.03 inch (0.762 …

Development Of Full Surface Transient Thermochromic Liquid Crystal Technique For Internal Cooling Channels, Lucky Tran

Electronic Theses and Dissertations

Proper design of high performance industrial heat transfer equipment relies on accurate knowledge and prediction of the thermal boundary conditions. In order to enhance the overall gas turbine efficiency, advancements in cooling technology for gas turbines and related applications are continuously investigated to increase the turbine inlet temperature without compromising the durability of the materials used. For detailed design, local distributions are needed in addition to bulk quantities. Detailed local distributions require advanced experimental techniques whereas they are readily available using numerical tools. Numerical predictions using a computational fluid dynamics approach with popular turbulence models are benchmarked against a semi-empirical …

Synthesis, Processing And Characterization Of Polymer Derived Ceramic Nanocomposite Coating Reinforced With Carbon Nanotube Preforms, Hongjiang Yang

Electronic Theses and Dissertations

Ceramics have a number of applications as coating material due to their high hardness, wear and corrosion resistance, and the ability to withstand high temperatures. Critical to the success of these materials is the effective heat transfer through a material to allow for heat diffusion or effective cooling, which is often limited by the low thermal conductivity of many ceramic materials. To meet the challenge of improving the thermal conductivity of ceramics without lowering their performance envelope, carbon nanotubes were selected to improve the mechanical properties and thermal dispersion ability due to its excellent mechanical properties and high thermal conductivity …

Decentralized Power Management In Microgrids, Amit Bhattacharjee

Electronic Theses and Dissertations

A large number of power sources, operational in a microgrid, optimum power sharing and accordingly controlling the power sources along with scheduling loads are the biggest challenges in modern power system. In the era of smart grid, the solution is certainly not simple paralleling. Hence it is required to develop a control scheme that delivers the overall power requirements while also adhering to the power limitations of each source. As the penetration of distributed generators increase and are diversifi ed, the choice of decentralized control becomes preferable. In this work, a decentralized control framework is conceived. The primary approach is …

Improving Scoliosis Rehabilitation, Ryan Neufeld

Mechanical and Aerospace Engineering Theses - Archive

Scoliosis, a disease that mainly affects children, is a deformity of the spinal column in all three dimensions. Treatment for scoliosis aims at straightening the spine with minimal discomfort to the patient. Current treatments involve wearing a polymeric brace that based on its design, exerts force on the spine in order to straighten it. The shape of the brace and the locations where the brace should apply forces are defined based on the experience of the orthotics specialist. Currently used braces are not equipped with sensors to monitor the loads generated and possibly aid in the rehabilitation process. The rehabilitation …

Computational Study Of Data Center Hotspot Mitigation With Snorkels As An Alternative Rack-Level Containment Strategy, Chris Onyiorah

Mechanical and Aerospace Engineering Theses - Archive

One of the major concerns of companies around the world is business continuity and with that comes the need to prevent operational dysfunction by keeping their information systems available and functional. IT professionals therefore, are constantly striving towards network sustainability by boosting the cooling cycle and infrastructure in data centers, while also reducing overall energy consumption. The combination of increasing IT workloads and packaging densities place stringent requirements on data center cooling systems and so, various traditional airflow management technologies have been implemented that propose significant energy savings and potential reduction in net annual cost for running data centers.In this …

Data Center Cooling Augmentation Using Micro-Encapsulated Phase Change Material, Ruddhi Shashikumar Deshmukh

Mechanical and Aerospace Engineering Theses - Archive

The ever increasing information technology heat load and data center cooling energy are the main reasons to investigate the performance of microencapsulated phase change slurry over other heat transfer fluids. In recent years, more effort is being made on the development of a new technique to use the phase change materials as pump-able heat transfer fluid and as heat storage system. Thermal Energy Storage (TES) using Phase Change Materials for data centers offers a very effective method of cutting electric power costs for owners and easing demand on the power grid. Thermal storage systems have been around for decades and …

Bio-Inspired Attitude Control Of Micro Air Vehicles Using Rich Information From Airflow Sensors, He Shen

Electronic Theses and Dissertations

Biological phenomena found in nature can be learned and customized to obtain innovative engineering solutions. In recent years, biologists found that birds and bats use their mechanoreceptors to sense the airflow information and use this information directly to achieve their agile flight performance. Inspired by this phenomenon, an attitude control system for micro air vehicles using rich amount of airflow sensor information is proposed, designed and tested. The dissertation discusses our research findings on this topic. First, we quantified the errors between the calculated and measured lift and moment profiles using a limited number of micro pressure sensors over a …

Design And Development Of Heterogenous Combustion Systems For Lean Burn Applications, Anthony Terracciano

Electronic Theses and Dissertations

Combustion with a high surface area continuous solid immersed within the flame, referred to as combustion in porous media, is an innovative approach to combustion as the solid within the flame acts as an internal regenerator distributing heat from the combustion byproducts to the upstream reactants. By including the solid structure, radiative energy extraction becomes viable, while the solid enables a vast extension of flammability limits compared to conventional flames, while offering dramatically reduced emissions of NOx and CO, and dramatically increased burning velocities. Efforts documented within are used for the development of a streamlined set of design principles, and …

A Lab-Scale Experimental Framework For Studying The Phenomenon Of Autorotation, Sigitas Rimkus

Electronic Theses and Dissertations

While wind energy has emerged as a popular source of renewable energy, the traditional wind turbine has an inherent limitation, namely that it only generates power in the presence of sufficiently high and consistent wind speeds. As a result, wind farms are typically built in areas with a high probability of the required wind speeds, which are geographically sparse. One way of overcoming this drawback is to tap into the energy available in winds at high altitudes which are not only consistent and of high magnitude, but also globally pervasive. An airborne wind energy device based upon the phenomenon of …

Time-Dependent Mechanical Behavior Of Proton Exchange Membrane Fuel Cell Electrodes, Zongwen Lu, Michael H. Santare, Anette M. Karlsson, F. Colin Busby, Peter Walsh

Mechanical Engineering Faculty Publications

The electrodes used for Proton Exchange Membrane Fuel Cells (PEMFCs) are typically painted or sprayed onto the membrane during manufacturing, making it difficult to directly characterize their mechanical behavior as a stand-alone material. An experimental-numerical hybrid technique is devised to extract the electrode properties from the experimentally measured properties of Nafion^® 211 membrane¹ and a membrane electrode assembly (MEA) based on Nafion^® 211 membrane at various temperatures, humidities, and strain rates. Within the linear regime, the rule-of-mixtures assuming an iso-strain condition is used to calculate the rate-dependent Young's modulus of the electrodes. Beyond the linear regime, reverse …

Phoresis Of A Solid Particle In Real Fluid, Yuan Ting Wu

Mechanical and Aerospace Engineering Dissertations - Archive

For micro- and nano-scale particles driven by interfacial non-contact forces in fluid, known as phoresis, this dissertation provides a general formulation and a systematic investigation. It starts with an analytical continuum-mechanics formulation that covers various important aspects of an interfacial structure, including viscosity and mass density variations as well as a body force field, in real fluid. It then reduces to specific solutions due to characteristic mechanisms. A closed-form analytical solution to the case of viscosity variation (which manifests itself as Navier's slip boundary condition) is derived. Furthermore, a novel mechanism for thermophoretic mobility driven by near-surface phase transition is …

Faults Identification In Three-Phase Induction Motors Using Support Vector Machines, Rama Hammo

Master of Technology Management Plan II Graduate Projects

Induction motor is one of the most important motors used in industrial applications. The operating conditions may sometime lead the machine into different fault situations. The main types of external faults experienced by these motors are over loading, single phasing, unbalanced supply voltage, locked rotor, phase reversal, ground fault, under voltage and over voltage. The machine should be shut down when a fault is experienced to avoid damage and for the safety of the workers. Computer based relays monitor the machine and disconnect it during the faults. The relay logic used to identify these faults requires sophisticated signal processing techniques …

Moving Obstacle Detection And Avoidance For Unmanned Ground Vehicle, Gangadhar Rajashekaraiah

Mechanical and Aerospace Engineering Theses - Archive

This thesis presents the development and implementation of an autonomous obstacle avoidance algorithm for UGV (Unmanned Ground Vehicle). The research improves the prior work by enhancing the obstacle avoidance capability to handle moving obstacle as well as stationary obstacles. A mathematical representation of the area of operation with obstacles is formulated by PTEM (Probabilistic Threat Exposure Map). The PTEM quantifies the risk in being at a position in an area with different types of threat. Threat in this context means UGV getting close to or running into stationary and moving obstacles. A LRF (Laser Range Finder) sensor mounted on the …

Computational Flow Analysis Of A Flapping Micro-Flyer Wing For Cycle-Averaged Force Production, Nitesh Rajendra Rajput

Mechanical and Aerospace Engineering Theses - Archive

Human engineers have been trying long to mimic creations of nature for their own benefits. One such area of interest is the insect based micro flapping wing flyers for their wide employment in commercial as well as military applications. These micro air vehicles (MAVs) are capable of performing acts that can be too dangerous for humans to perform, such as tactical reconnaissance in a combat zone. The maneuverability required of these MAVs call for a careful design and thorough study of their aerodynamic performance. This research goal is to provide an estimation of the forces generated during the flapping motion …

Scaling Laws For Radial Foil Bearings, Srikanth Honavara Prasad

Mechanical and Aerospace Engineering Theses - Archive

The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort(time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings …

Model Block Press, Jordan Brown, Michael Evans, Connor Morrow

Mechanical Engineering

The Center for Vocational Building Technology came to the Mechanical Engineering department at Cal Poly, San Luis Obispo with a project to create a new, less expensive model block press than their current BP9 design. This press would produce ¼ scale model compressed earth blocks to be sold as souvenirs and used in demonstrations for constructing buildings. After analyzing the design of the current block presses, JCM came up with the BP10 design. The BP10 operates similarly to the larger block presses, but will cost significantly less to produce and will have some of the design features enhanced to make …

Low Cost Flow Sensing For Field Sprayers, Yue Zhang

Theses and Dissertations--Biosystems and Agricultural Engineering

Precisely measuring the flow rate in sprayers is a key technology to precision agriculture. With the development of advanced technologies, the demand for the ability to measure flow rate of individual nozzle has become more important and urgent.

This paper investigates the possibility of developing a low-cost flow rate measurement technique. The technique is based on analyzing the acoustic signal from a microphone placed near the nozzle tip. A comparison between acoustic signal and vibration signal was made to study the relations between them. Then several possible locations of the microphone for measuring flow rate were tested and compared, and …

Computational Investigation Of Injectable Treatment Strategies For Myocardial Infarction, Hua Wang

Theses and Dissertations--Mechanical and Aerospace Engineering

Heart failure is an important medical disease and impacts millions of people throughout the world. In order to treat this problem, biomaterial injectable treatment injected into the myocardium of the failing LV are currently being developed. Through this treatment, the biomaterial material injections can reduce wall stresses during the cardiac remodeling process. By using computational techniques to analyze the effects of a treatment involving the injection of biomaterial material into the LV after MI, the material parameters of the hydrogel injections can be optimized. The results shows that the hydrogel injections could reduce the global average fiber stress and the …

An Analysis Of Energy Resources Utilization For Two Metal Joining Manufacturing Processes, Jonathan Gasser

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable manufacturing involves utilizing energy resources efficiently. Currently, the state of sustainability for a given manufacturing process is described by most in a qualitative sense as opposed to using quantitative metrics. This thesis offers a segment of analysis needed to understand the state of sustainability in the context of energy resource utilization. This was accomplished by measuring the order of magnitude difference between the energy consumption of a manufacturing process vs. the theoretical minimum amount of energy required to complete the same task (aluminum T-joint bond). This analysis was completed for a TIG welding process and a controlled atmosphere brazing …

Axial Compressor Flow Behavior Near The Aerodynamic Stability Limit, Bradley D. Butler

Theses and Dissertations--Mechanical and Aerospace Engineering

In this investigation, casing mounted high frequency response pressure transducers are used to characterize the flow behavior near the aerodynamic stability limit of a low speed single stage axial flow compressor. Time variant pressure measurements are acquired at discrete operating points up to the stall inception point and during the transition to rotating stall, for a length of time no shorter than 900 rotor revolutions. The experimental data is analyzed using multiple techniques in the time and frequency domains.

Experimental results have shown an increase in the breakdown of flow periodicity as the flow coefficient is reduced. Below a flow …

Theoretical Study Of Thermal Analysis Kinetics, Yunqing Han

Theses and Dissertations--Mechanical and Aerospace Engineering

In the past decades, a great variety of model fitting and model free (isoconversional) methods have been developed for extracting kinetic parameters for solid state reactions from thermally stimulated experimental data (TGA, DSC, DTA etc.). However, these methods have met with significant controversies about their methodologies. Firstly, model-fitting methods have been strongly criticized because almost any reaction mechanism can be used to fit the experimental data satisfactorily with drastic variations of the kinetic parameters, and no good criterion exists to tell which mechanism is the best choice. Secondly, previous model free methods originated from the isoconversional principle, which is often …

Investigation Of Drilling Performance In Cryogenic Drilling On Cfrp Composite Laminates, Tian Xia

Theses and Dissertations--Mechanical and Aerospace Engineering

In recent years, there has been a substantial growth in the application of carbon fiber reinforced plastic (CFRP) composite materials in automobile and aerospace industries due to their superior properties such as lightweight, high strength, excellent corrosion resistance, and minimal fatigue concerns. The present study evaluates the drilling performance of woven carbon fiber reinforced plastics under both dry and cryogenic cooling conditions using uncoated solid carbide drill with a through-hole for coolant application.

The effects of the cooling conditions and the cutting parameters on drilling performance in drilling CFRP were evaluated in terms of generated thrust force, torque, cutting edge …

Shape Memory Behavior Of Single And Polycrystalline Nickel Rich Nickel Titanium Alloys, Irfan Kaya

Theses and Dissertations--Mechanical and Aerospace Engineering

NiTi is the most commonly used shape memory alloy (SMA) and has been widely used for bio-medical, electrical and mechanical applications. Nickel rich NiTi shape memory alloys are coming into prominence due to their distinct superelasticity and shape memory properties as compared to near equi-atomic NiTi shape memory alloys. Besides, their lower density and higher work output than steels makes these alloys an excellent candidate for aerospace and automotive industry. Shape memory properties and phase transformation behavior of high Ni-rich Ni₅₄Ti₄₆ (at.%) polycrystals and Ni-rich Ni₅₁Ti₄₉ (at.%) single-crystals are determined. Their properties are sensitive …

Finite Element Modeling And Fabrication Of An Sma-Smp Shape Memory Composite Actuator, Mohammad Souri

Theses and Dissertations--Mechanical and Aerospace Engineering

Shape memory alloys and polymers have been extensively researched recently because of their unique ability to recover large deformations. Shape memory polymers (SMPs) are able to recover large deformations compared to shape memory alloys (SMAs), although SMAs have higher strength and are able to generate more stress during recovery.

This project focuses on procedure for fabrication and Finite Element Modeling (FEM) of a shape memory composite actuator. First, SMP was characterized to reveal its mechanical properties. Specifically, glass transition temperature, the effects of temperature and strain rate on compressive response and recovery properties of shape memory polymer were studied. Then, …

Estimating Passive Material Properties And Fiber Orientation In A Myocardial Infarction Through An Optimization Scheme Using Mri And Fe Simulation, Dimitri Mojsejenko

Theses and Dissertations--Mechanical and Aerospace Engineering

Myocardial infarctions induce a maladaptive ventricular remodeling process that independently contributes to heart failure. In order to develop effective treatments, it is necessary to understand the way and extent to which the heart undergoes remodeling over the course of healing. There have been few studies to produce any data on the in-vivo material properties of infarcts, and much less on the properties over the time course of healing. In this paper, the in-vivo passive material properties of an infarcted porcine model were estimated through a combined use of magnetic resonance imaging, catheterization, finite element modeling, and a genetic algorithm optimization …