Mechanical Engineering Commons^™

Analytical And Experimental Analysis Of Magnetorheological Elastomers, Sarah Trabia

UNLV Theses, Dissertations, Professional Papers, and Capstones

Many engineering applications ranging from robotic joints to shock and vibration mitigation can benefit by incorporating components with variable stiffness. In addition, variable stiffness structures can provide haptic feedback (the sense of touch) to the user. In this work, it is proposed to study Magnetorheological Elastomers (MRE), where iron particles within the elastomer compound develop a dipole interaction energy, to be used in a device for haptic feedback. A novel feature of this MRE device is to introduce a field-induced variable shear modulus bias via a permanent magnet and using a current input to the electromagnetic control coil to change …

Neutron Spectroscopy With Scintillation Detectors Using Wavelets, Jessica Hartman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to study neutron spectroscopy using the EJ-299-33A plastic scintillator. This scintillator material provided a novel means of detection for fast neutrons, without the disadvantages of traditional liquid scintillation materials. EJ-299-33A provided a more durable option to these materials, making it less likely to be damaged during handling. Unlike liquid scintillators, this plastic scintillator was manufactured from a non-toxic material, making it safer to use, as well as easier to design detectors. The material was also manufactured with inherent pulse shape discrimination abilities, making it suitable for use in neutron detection.

The neutron spectral unfolding …

Investigation Of Concurrent Energy Harvesting From Ambient Vibrations And Wind, Amin Bibo

All Dissertations

In recent years, many new concepts for micro-power generation have been introduced to harness wasted energy from the environment and maintain low-power electronics including wireless sensors, data transmitters, controllers, and medical implants. Generally, such systems aim to provide a cheap and compact alternative energy source for applications where battery charging or replacement is expensive, time consuming, and/or cumbersome. Within the vast field of micro-power generation, utilizing the piezoelectric effect to generate an electric potential in response to mechanical stimuli has recently flourished as a major thrust area. Based on the nature of the ambient excitation, piezoelectric energy harvesters are divided …

Advanced Bulk Processing Of Lightweight Materials For Utilization In The Transportation Sector, Justin Milner

All Dissertations

The overall objective of this research is to develop the microstructure of metallic lightweight materials via multiple advanced processing techniques with potentials for industrial utilization on a large scale to meet the demands of the aerospace and automotive sectors. This work focused on (i) refining the grain structure to increase the strength, (ii) controlling the texture to increase formability and (iii) directly reducing processing/production cost of lightweight material components. Advanced processing is conducted on a bulk scale by several severe plastic deformation techniques including: accumulative roll bonding, isolated shear rolling and friction stir processing to achieve the multiple targets of …

A Verification Of Steady State Discontinuous Solutions Using The Method Of Manufactured Solutions For Finite Volume Computational Fluid Dynamic Codes, Benjamin Grier

All Dissertations

When applying the method of manufactured solutions (MMS) on computational fluid dynamic (CFD) software, it is traditionally a requirement that all solutions be continuous on the computational domain. This stipulation is limiting for the verification and validation of CFD solutions where discontinuities are frequent. This work details the development of a discontinuous MMS method for finite volume codes. The CFD code used throughout this research is a cell centered, finite volume, 1st order, Eulerian scheme within the software AVUS (Air Vehicles Unstructured Solver) which is combined with uniform structured grids. This code is used as a representative testing platform with …

Increased Span Length For The Mgs Long-Span Guardrail System, Nicholas A. Weiland

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Long-span guardrail systems have been recognized as an effective means of shielding low-fill culverts while minimizing construction efforts and limiting culvert damage and repair. The current MGS long-span design provided the capability to span unsupported lengths up to 25 ft (7.6 m) without the use of nested guardrail. The excellent performance of the MGS long-span system in full-scale crash tests suggested that longer span lengths may be possible with the current design.

A detailed analysis of the MGS long-span guardrail system was performed using the finite element software program LS-DYNA^®. It was shown that the MGS long-span design …

Understanding The Effects Of Blast Wave On The Intracranial Pressure And Traumatic Brain Injury In Rodents And Humans Using Experimental Shock Tube And Numerical Simulations, Aravind Sundaramurthy

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Blast induced neurotrauma (BINT) has been designated as the “signature injury” to warfighters in the recent military conflicts. In the past decade, conflicts in Iraq (operation Iraqi freedom) and Afghanistan (operation enduring freedom) as well as the increasing burden of the terrorism around the world resulted in an increased number of cases with blast Traumatic Brain Injury (bTBI). Recently, a lot of research has been done to study the neurological and neurochemical degenerations resulting from BINT using animal models especially rat models. However, it is not clear how and whether the biological outcomes from animal models can be translated to …

Reinterpretation Of Velocity-Dependent Atomic Friction: Influence Of The Inherent Instrumental Noise In Friction Force Microscopes, Yalin Dong, Hongyu Gao, Ashlie Martini, Philip Egberts

Mechanical Engineering Faculty Research

We have applied both the master equation method and harmonic transition state theory to interpret the velocity-dependent friction behavior observed in atomic friction experiments. To understand the discrepancy between attempt frequencies measured in atomic force microscopy experiments and those estimated by theoretical models, both thermal noise and instrumental noise are introduced into the model. It is found that the experimentally observed low attempt frequency and the transition point at low velocity regimes can be interpreted in terms of the instrumental noise inherent in atomic force microscopy. In contrast to previous models, this model also predicts (1) the existence of a …

Panel I: Connecting 2nd Law Analysis With Economics, Ecology And Energy Policy, Richard Gaggioli, Mauro Reini

Mechanical Engineering Faculty Research and Publications

The present paper is a review of several papers from the Proceedings of the Joint European Thermodynamics Conference, held in Brescia, Italy, 1–5 July 2013, namely papers introduced by their authors at Panel I of the conference. Panel I was devoted to applications of the Second Law of Thermodynamics to social issues—economics, ecology, sustainability, and energy policy. The concept called Available Energy which goes back to mid-nineteenth century work of Kelvin, Rankine, Maxwell and Gibbs, is relevant to all of the papers. Various names have been applied to the concept when interactions between the system of interest and an environment …

Refinement And Characterization Of Synthetic Vocal Fold Models, Shelby Charisse Ward

Theses and Dissertations

Understanding vocal fold mechanics is an integral part of voice research and synthetic vocal fold models are an essential tool in characterizing vocal fold mechanics. These models contain multiple layers with varying stiffness, much like human vocal folds. The purpose of this thesis is to improve the current models and modeling techniques, as well as investigate the impact of asymmetry on model vibration. A new design for an MRI-based model is detailed. This model has a more realistic geometry than the simplified models and mimics some of the vibratory characteristics observed in human vocal folds. The MRI-based model was used …

Variable Viscosity Condition In The Modeling Of A Slider Bearing, Kedar Nath Uprety, S.C. Mancas

Publications

To reduce tear and wear of machinery lubrication is essential. Lubricants form a layer between two surfaces preventing direct contact and reduce friction between moving parts and hence reduce wear. In this short letter the lubrication of two slider bearings with parallel and nonparallel is studied. First, we show that bearings with parallel plates cannot support any load. For bearings with nonparallel plates we are interested on how constant and temperature dependent viscosity affects the properties of the bearings. Also, a critical temperature for which the bearings would fail due to excess in temperature is found for both latter cases. …

Easily Implantable And Stable Nail-Fastener For Skeletal Fixation And Method, David Lecronier, Patrick Atkinson

Mechanical Engineering Patents

An intramedullary nail (20) defining a bore (34) is inserted into a medullary canal (26) of a bone (24). A threaded fastener (22) has a compression portion (48) presenting a compression portion diameter (DCP) and a threaded portion (50) presenting a threaded portion diameter (DTP). The fastener (22) extends through a near cortex hole (40) and/or a far cortex hole (42), and the threaded portion (22) threadedly engages the bore (34). A compression transmission device (54) is disposed between a head (44) of the fastener (22) and the intramedullary nail (20) for transmitting the compressional load of the threaded fastener …

Thermal Resistance At An Interface Between A Crystal And Its Melt, Zhi Liang, William J. Evans, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Non-Equilibrium Molecular Dynamics Simulations Are Used to Determine Interfacial Thermal Resistance (Kapitza Resistance) between a Crystal and its Melt for Three Materials Including Ar, H2O, and C8H 18 (Octane). the Simulation Results Show that the Kapitza Resistance at a Crystal-Melt Interface is Very Small and Thus Has a Negligible Effect on Thermal Transport Across the Crystal-Melt Interface. the Underlying Origins of This Behavior Are the Very Good Vibrational Property Match between the Two Materials Forming the Interface and Good Interfacial Bonding. the Result Also Indicates that the Commonly-Used Assumption that Temperature Profile is Continuous at the Crystal-Melt Interface is Valid …

Analysis And Application Of Passive Gait Rehabilitation Methods, Ismet Handzic

USF Tampa Graduate Theses and Dissertations

Human gait is elegant and efficient in propelling the body forward. While a healthy human gait is symmetric, any deviation from symmetry can cause inefficiencies to the entire body. Such asymmetries may present themselves in hemiplegic patients, prosthetic users, lower limb injuries, limb height and weight discrepancies, or abnormal overground foot rolling. In this dissertation, practical passive methods to alleviate such asymmetric walking dynamics are presented. The novel concepts presented in this manuscript can all be related and applied to passive gait rehabilitation, that is, the rehabilitation of a person's gait through methods that do not require external power. One …

Acoustic Testing Of Generator/Alternator Fans, Jacob Kriesel

Culminating Projects in Electrical Engineering

The intent of this project was to fill in a gap of the testing knowledge possessed for acoustics of an alternator within a generator set. The objective was to build a test fixture that would allow the user to test the acoustics of alternators without the driving force of an engine, which is a high acoustic source during testing. Eliminating the engine from the equation would allow for more accurate data of the product line, allowing for better utilization of acoustic tools when implementing sound source dampening. At the end of the project, it was found that the test fixture …

Study Of A Generalized Empirical Model For Predicting Pressure Drop For Internal Flows, Tejas Anup Pant

Open Access Theses

A generalized empirical model for estimating the pressure drop across a channel for a given massflow rate is studied through computational fluid dynamics (CFD) simulations. It is observed that for developing laminar and turbulent flow through channels and pipes of arbitrary cross-section, the variation in the pressure drop between any two points in the flow direction with massflow rate can be well approximated by a second degree expression in massflow rate which is referred to as the empirical model in this study. In the first part of this study, a correlation between the pressure gradient and the massflow rate is …

Synthesis And Characterization Of Bulk Metallic Glasses Prepared By Laser Direct Deposition, Xiaoyang Ye

Open Access Theses

Fe-based and Zr-based metallic glasses have attracted extensive interest for structural applications due to their excellent glass forming ability, superior mechanical properties, unique thermal and corrosion properties. In this study, the feasibility of synthesizing metallic glasses with good ductility by laser direct deposition is explored. Both in-situ synthesis with elemental powder mixture and ex-situ synthesis with prealloyed powder are discussed. Microstructure and properties of laser direct deposited metallic glass composites are analyzed.^ Synthesis of Fe-Cr-Mo-W-Mn-C-Si-B metallic glass composite with a large fraction of amorphous phase was accomplished using laser direct deposition. X-ray diffraction (XRD) and transmission electron microscopy investigations revealed …

Investigation Of The Influence Of Gravitational Body Force Effects On Critical Heat Flux For Flow Boiling With Subcooled And Two-Phase Inlet, Christopher Alan Konishi

Open Access Dissertations

Space agencies worldwide are being confronted with the challenges of more distant manned space missions, which will demand greater energy efficiency and reduced weight and volume. One method being considered to reduce the weight and volume is to replace present single-phase Thermal Control Systems (TCSs) with ones that rely on flow boiling and condensation. This transition will require a thorough understanding of the influence of reduced gravity on flow boiling and condensation, and the development of predictive tools for both. The primary purpose of the present study is to investigate the impact gravitational body force effects have on flow boiling …

A Small-Scale Experiment Using Microwave Interferometry To Investigate Detonation And Shock-To-Detonation Transition In Pressed Tatb, Peter John Renslow

Open Access Theses

A small-scale characterization test utilizing microwave interferometry was developed to dynamically measure detonation and run to detonation distance in explosives. The technique was demonstrated by conducting two experimental series on the well-characterized explosive triaminotrinitrobenzene (TATB). In the first experiment series, the detonation velocity was observed at varying porosity. The velocity during TATB detonation matched well with predictions made using CHEETAH and an empirical relation from the Los Alamos National Laboratory (LANL). The microwave interferometer also captured unsteady propagation of the reaction when a low density charge was near the failure diameter. In the second experiment series, Pop-plots were produced using …

Light Off Temperature Based Approach To Determine Diesel Oxidation Catalyst Effectiveness Level And The Corresponding Outlet No And No2 Characteristics, Prateek Tayal

Open Access Theses

According to the latest EPA emission regulations, the NO_x (Nitrogen oxide compounds) emissions from heavy duty compression ignition engines need to see a dramatic reduction. The current technology used for this purpose is the selective catalytic reduction (SCR) system, which achieves NO_x reduction of around 90% [9]. This involves urea injection which is influenced by the NO: NO₂ ratio at the inlet to the SCR. Thus, the role of the DOC (Diesel Oxidation Catalyst) where most of the oxidation of the NO_x compounds takes place, comes to fore. The focus is also on the effectiveness of …

Real-Time Simulation Of Three-Dimensional Shoulder Girdle And Arm Dynamics, Edward K. Chadwick, Dimitra Blana, Robert F. Kirsch, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Electrical stimulation is a promising technology for the restoration of arm function in paralyzed individuals. Control of the paralyzed arm under electrical stimulation, however, is a challenging problem that requires advanced controllers and command interfaces for the user. A real-time model describing the complex dynamics of the arm would allow user-in-the-loop type experiments where the command interface and controller could be assessed. Real-time models of the arm previously described have not included the ability tomodel the independently controlled scapula and clavicle, limiting their utility for clinical applications of this nature. The goal of this study therefore was to evaluate the …

Analysis And Compression Of Large Cfd Data Sets Using Proper Orthogonal Decomposition, Trevor Jon Blanc

Theses and Dissertations

Efficient analysis and storage of data is an integral but often challenging task when working with computation fluid dynamics mainly due to the amount of data it can output. Methods centered around the proper orthogonal decomposition were used to analyze, compress, and model various simulation cases. Two different high-fidelity, time-accurate turbomachinery simulations were investigated to show various applications of the analysis techniques. The first turbomachinery example was used to illustrate the extraction of turbulent coherent structures such as traversing shocks, vortex shedding, and wake variation from deswirler and rotor blade passages. Using only the most dominant modes, flow fields were …

Numerical Evaluation Of Paris-Regime Crack Growth Rate Based On Plastically Dissipated Energy, Parag G. Nittur, Anette M. Karlsson, Leif A. Carlsson

Mechanical Engineering Faculty Publications

The crack growth rate during cyclic loading is investigated via numerical simulations. The crack advancement is governed by a propagation criterion that relates the increment in plastically dissipated energy ahead of the crack tip to a critical value. Once this critical value is satisfied, crack propagation is modeled via a node release scheme. Thus, the crack growth rate is an output from the numerical simulation. The crack growth rate predicted by the proposed scheme is compared with published experimental crack growth data in the Paris-regime for selected metals. A good match is found between the experimentally observed crack growth rates …

Development Of A Complex Synthetic Larynx Model And Characterization Of The Supraglottal Jet, Jayrin Ella Seegmiller

Theses and Dissertations

Voice is an important tool for communication. Consequently, voice disorders tend to severely diminish quality of life. Voice research seeks to understand the physics that govern voice production to improve treatment of voice disorders. This thesis develops a method for creating complex synthetic laryngeal models and obtaining flow data within these complex models. The method uses Computed Tomography (CT) scan data to create silicone models of the larynx. Index of refraction matching allows flow field data to be collected within a synthetic complex larynx, which had previously been impossible. A short proof-of-concept of the method is set forth. Details on …

Experimental Study Of Unsteady Heat Release In An Unstable Single Element Lean Direct Injection (Ldi) Gas Turbine Combustor, Varun S. Lakshmanan

Open Access Theses

In an effort to curb emissions from gas turbine engines, many low emission engine concepts have been developed. Among the most promising of these is the LDI (Lean Direct Injection). These systems operate at relatively low equivalence ratios close to blowout and are prone to instabilities. Combustion instabilities can reduce the life of the combustor by causing large pressure fluctuations and enhanced heat release to the walls of the combustor and reduce the efficiency of the engines. The understanding of combustion instabilities is vital to the implementation of such systems. Combustion instabilities are studied in an self-excited single element gas …

Weld Pool And Keyhole Dynamic Analysis Based On Visual System And Neural Network During Laser Keyhole Welding, Masiyang Luo

Open Access Theses

In keyhole fiber laser welding processes, the weld pool behavior and keyhole dynamics are essential to determining welding quality. To observe and control the welding process, the accurate extraction of the weld pool boundary as well as the width is required. In addition, because of the cause-and-effect relationship between the welding defects and stability of the keyhole, which is primarily determined by keyhole geometry during the welding process, the stability of keyhole needs to be considered as well.^ The first part of this thesis presents a weld pool edge detection technique based on an off axial green illumination laser and …

Assessment Of Noise Metrics For Application To Rotorcraft, Andrew L. Mcmullen

Open Access Theses

It is anticipated that the use of rotorcraft passenger vehicles for shorter journeys will increase because their use can reduce the time between boarding and take-off. The characteristics of rotorcraft noise are very different to that of fixed wing aircraft. There can be strong tonal components, fluctuations that can also make the noise sound impulsive, and future rotorcraft may produce proportionally more low frequency noise content. Most metrics that are used today to predict noise impact on communities around airports (e.g., L_dn) are just functions of A-weighted sound pressure level. To build a better noise annoyance model that …

Experimental Characterization Of The Pt Asymmetry With Balanced Inflow And Outflow At Different Reynolds Numbers, Zijie Qu

Open Access Theses

This research focused on characterizing the PT asymmetry with balanced inflow and outflow conditions at different Reynolds number using experimental method. The characterization process utilized PIV data to explore the relationship between PT asymmetry and Reynolds number in two different experiments. In the first experiment, balanced inflow and outflow are used to generate the flow field in a cuboid test section with different Reynolds number, the inflow and outflow are located at the central of left side and right side of the test section. In the second experiment, a main flow is introduced to the first experiment by adding another …

Impinging Jet Spray Formation Using Non-Newtonian Liquids, Neil S. Rodrigues

Open Access Theses

Over the past two decades there has been a heightened interest in implementing gelled propellants for rocket propulsion, especially for hypergolic bi-propellants such as monomethylhydrazine (MMH) and nitrogen tetroxide oxidizer (NTO). Due to the very high level of toxicity of hypergolic liquid rocket propellants, increasing safety is an important area of need for continued space exploration and defense operations. Gelled propellants provide an attractive solution to meeting the requirements for safety, while also potentially improving performance. ^ A gelling agent can be added to liquid propellants exhibiting Newtonian behavior to transform the liquid into a non-Newtonian fluid with some solid-like …

Design Of A High Performance Actuation System Enabled By Energy Coupling Actuation, Daniel Richard Skelton

Open Access Theses

The main goal of the research was to design, manufacture, and test a new linear actuation system. Research was conducted on several types of actuation methods applied to hydraulic valves. A literature review showed that most existing actuator systems have the actuator and control mass coupled together. There is a need for high speed actuation. The proposed idea is to have the actuation mass always moving while accelerating and decelerating the control mass. The decoupling of these two will allow for the actuation and control mechanism to be independent and only move the control mechanism when needed. Initial modeling, as …