Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 15901 - 15930 of 30247

Full-Text Articles in Mechanical Engineering

System And Method For Estimating States Of Spacecraft In Planet-Moon Environment, Piyush Grover Aug 2015

System And Method For Estimating States Of Spacecraft In Planet-Moon Environment, Piyush Grover

Department of Mechanical and Materials Engineering: Faculty Publications

A method estimates a state of a spacecraft in a planet-moon environment by executing iteratively a particle filter. The particle filter comprising integrates individually states of each particle of the particle filter according to a probability-evolution equation using a model of the state of the spacecraft represented as a planar circular restricted three-body problem and determines a prior probability of each particle as a previous posterior probability of a corresponding particle during a previous iteration. A joint probability distribution of the state of the spacecraft is determines using the states of each particle and the prior probabilities of each particle …

Go to article

Design And Research Of Vlcc Vessel Virtual Marine Engine Room, Chuang Zhao Aug 2015

Design And Research Of Vlcc Vessel Virtual Marine Engine Room, Chuang Zhao

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Go to article

Fabrication Of Cellulose Fine Fiber Based Membranes Embedded With Silver Nanoparticles Via Forcespinning, Fenghua Xu, Baicheng Weng, Luis A. Materon, Anxiu Kuang, Jorge A. Trujillo, Karen Lozano Aug 2015

Fabrication Of Cellulose Fine Fiber Based Membranes Embedded With Silver Nanoparticles Via Forcespinning, Fenghua Xu, Baicheng Weng, Luis A. Materon, Anxiu Kuang, Jorge A. Trujillo, Karen Lozano

Mechanical Engineering Faculty Publications

This study presents the successful development of cellulose fiber based membranes embedded with silver nanoparticles. These fine fiber membranes were developed utilizing the Forcespinning (FS) technique followed by alkaline hydrolysis treatment. The fiber morphology, homogeneity and yield were optimized by varying spinning parameters such as polymer concentration and angular velocity of the spinnerets. The structure, thermal and mechanical properties, and water absorption capability of the developed membranes were investigated. The cellulose acetate (CA) present in the membrane was converted to cellulose in the presence of embedded silver nanoparticles by alkaline hydrolysis. The silver nanoparticles embedded cellulose membrane exhibits outstanding water …

Go to article

Optimization Of Blalock-Taussig Shunt And Anastomotic Geometry For Vascular Access Fistula Using A Genetic Algorithm, Guangyu Bao Aug 2015

Optimization Of Blalock-Taussig Shunt And Anastomotic Geometry For Vascular Access Fistula Using A Genetic Algorithm, Guangyu Bao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Blalock-Taussig (BT) shunts are used for defects that affect the flow of blood from the right ventricle, through the pulmonary artery, and to the lungs. Arteriovenous (AV) fistula is one type of vascular access which is a surgically created vein used to remove and return blood during hemodialysis. Plastic grafts used in the above two reconstructions may result in areas of non-physiologic flow in the grafts leading to risk of stenosis (blocked area) and thrombosis, which is the single major cause for access morbidity. The focus of this thesis is to study BT shunts and anastomoses models using Computational Fluid …

Go to article

Entry Flow And Heat Transfer Of Laminar And Turbulent Forced Convection Of Nanofluids In A Pipe And A Channel, Yihe Huang Aug 2015

Entry Flow And Heat Transfer Of Laminar And Turbulent Forced Convection Of Nanofluids In A Pipe And A Channel, Yihe Huang

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis presents a numerical investigation of laminar and turbulent fluid flow and convective heat transfer of nanofluids in the entrance and fully developed regions of flow in a channel and a pipe. In recent years, nanofluids have attracted attention as promising heat transfer fluids in many industrial processes due to their high thermal conductivity. Nanofluids consist of a suspension of nanometer-sized particles of higher thermal conductivity in a liquid such as water. The thermal conductivity of nanoparticles is typically an order-of-magnitude higher than the base liquid, which results in a significant increase in the thermal performance of the nanofluid …

Go to article

Optimal Rastering Orientation In Freeform Extrusion Fabrication Processes, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Robert G. Landers Aug 2015

Optimal Rastering Orientation In Freeform Extrusion Fabrication Processes, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Many researchers have tried to optimize the build direction of additively manufactured parts to minimize the vertical staircase effect. However, the horizontal staircase effect should also be considered when fully dense parts are to be fabricated. In this paper, part inaccuracy due to the horizontal staircase effect is considered in order to determine the optimal rastering orientation in building the part. An algorithm is developed to estimate this inaccuracy and a technique is proposed to minimize it. The effect of rastering orientation on staircase errors is examined, and the particle swarm optimization method is used to determine the optimum rastering …

Go to article

Direct Laser Deposition Of Ti-6al-4v From Elemental Powder Blends, Lei Yan, Xueyang Chen, Wei Li, Frank W. Liou, Joseph William Newkirk Aug 2015

Direct Laser Deposition Of Ti-6al-4v From Elemental Powder Blends, Lei Yan, Xueyang Chen, Wei Li, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A thin-wall structure composed of Ti-6Al-4V has been deposited using direct laser deposition (DLD) from blended Ti, Al, and V elemental powders. The microstructure and composition distribution along the build height direction were intensively investigated using optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), and Vickers hardness testing. The microstructures of the as-deposited Ti-xAl-yV were studied using EDS to determine appropriate weight percentage for Al and V in the blended powders before mixing. The effects of laser power and laser transverse speed on the microstructure were investigated and optimized laser processing parameters were concluded.

Go to article

A Framework For Large Scale Fused Pellet Modeling (Fpm) By An Industry Robot, Zhiyuan Wang, Renwei Liu, Todd E. Sparks, Frank W. Liou Aug 2015

A Framework For Large Scale Fused Pellet Modeling (Fpm) By An Industry Robot, Zhiyuan Wang, Renwei Liu, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fused pellet modeling (FPM) is an important method in additive manufacturing technology, where granular material is used instead of filaments. In FPM, prototypes are constructed by the sequential deposition of material layers. As the size of the part increases, the problem of long build times and part deformation becomes critical. In this paper, methods for eliminating the void density during deposition and accuracy control principles for large scale FPM processes are studied. By analyzing the ab initio principles of this process, a mini extruder with variable pitch and progressive diameter screw for the large scale fused deposition is proposed. Based …

Go to article

Planning Freeform Extrusion Fabrication Processes With Consideration Of Horizontal Staircase Effect, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Robert G. Landers Aug 2015

Planning Freeform Extrusion Fabrication Processes With Consideration Of Horizontal Staircase Effect, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An algorithm has been developed to estimate the “horizontal” staircase effect and a technique is proposed to reduce this type of geometrical error for freeform extrusion fabrication processes of 3D “solid” parts. The adaptive rastering technique, proposed in this paper, analyzes the geometry of each layer and changes the width of each line of the raster adaptively in order to reduce the staircase error and increase the productivity simultaneously. For each line, the maximum width that results in a staircase error smaller than a predefined threshold is determined for decreasing the fabrication time or increasing the dimensional accuracy, or both. …

Go to article

Performance Metric For Powder Feeder Systems In Additive Manufacturing, Venkata Sivaram Bitragunta, Todd E. Sparks, Frank W. Liou Aug 2015

Performance Metric For Powder Feeder Systems In Additive Manufacturing, Venkata Sivaram Bitragunta, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In blown powder Direct Metal Deposition (DMD) process, parts are built by adding metal powder on the melt pool created by the laser system. At low feed rates powder feeder systems have perturbations. The study focused on relationship between the perturbation frequencies by inherent powder feeder designs and its impact on deposition quality. Performance metric determine the relation between perturbations in the powder flow and quality of the deposit. To determine performance metric, various powder feeder designs were analyzed. Perturbation frequencies were introduced to the disk feeder design. The quality of the deposit was determined by the surface roughness of …

Go to article

Dc-Gain Layer-To-Layer Stability Criterion In Laser Metal Deposition Processes, Patrick M. Sammons, Douglas A. Bristow, Robert G. Landers Aug 2015

Dc-Gain Layer-To-Layer Stability Criterion In Laser Metal Deposition Processes, Patrick M. Sammons, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In Laser Metal Deposition (LMD), a blown powder metal additive manufacturing process, functional metal parts are fabricated in a layer-by-layer fashion. In addition to the in-layer dynamics, which describe how the process evolves within a given layer, the additive-fabrication property of LMD creates a second set of dynamics which describe how the process evolves from layer-to-layer. While these dynamics, termed layer-to-layer dynamics, are coupled with both the in-layer dynamics and the process operating conditions, they are not widely considered in the modeling, process planning, or process control of LMD operations. Because of this, seemingly valid choices for process parameters can …

Go to article

Freeform Extrusion Fabrication Of Titanium Fiber Reinforced Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas Aug 2015

Freeform Extrusion Fabrication Of Titanium Fiber Reinforced Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Although implants made with bioactive glass have shown promising results for bone repair, their application in repairing load-bearing long bones is limited due to their low fracture toughness and fairly fast degradation response in vivo. In this paper, we describe our investigation of freeform extrusion fabrication of silicate based 13-93 bioactive glass scaffolds reinforced with titanium fibers. A composite paste was prepared with 13-93 bioactive glass filled with titanium fibers (~16 µm in diameter and aspect ratio of ~250) having a volume fraction of 0.4 vol. %. This paste was then extruded to fabricate scaffolds with an extrudate diameter …

Go to article

Laser Metal Deposition Of Functionally Gradient Materials From Elemental Copper And Nickel Powders, Sreekar Karnati, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer Aug 2015

Laser Metal Deposition Of Functionally Gradient Materials From Elemental Copper And Nickel Powders, Sreekar Karnati, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This work deals with the planning and fabrication of a functionally gradient copper-nickel composition via Laser Metal Deposition (LMD). Various compositions of copper and nickel were made by blending different weight percentages which were then sequentially deposited to fabricate functionally gradient copper-nickel thin-wall structures. Analyses were performed by sectioning the thin-wall samples for metallographic, hardness, X-ray diffraction (XRD) and Energy Dispersive X-ray Spectroscopy (EDS) studies. The fabrication was studied for identifying and corroborating the deposited compositions and their corresponding gradients. XRD analyses were performed to identify the crystal structure of the deposit. EDS analysis was instrumental in identifying the variation …

Go to article

Microstructure And Property Of Tib-Reinforced Ti Alloy Composites By Laser Metal Deposition, Yunlu Zhang, Jingwei Zhang, Frank W. Liou, Joseph William Newkirk Aug 2015

Microstructure And Property Of Tib-Reinforced Ti Alloy Composites By Laser Metal Deposition, Yunlu Zhang, Jingwei Zhang, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

TiB-reinforced Ti alloy composites have been laser deposited with pre-alloyed Ti-6Al4V-1B powder. The microstructure of the as-deposited and heat treated composites have been characterized in detail using scanning electron microscope (SEM). A homogeneous dispersion of needle-like TiB precipitates is formed in the Ti-6Al-4V α/β matrix. TiB precipitates promote formation of small near equaxed α/β grain after β annealing process. The micro-hardness of the laser deposited composites increase 20-30% with 5 vol. % TiB precipitates compared to unreinforced Ti-6Al-4V deposits.

Go to article

Effects Of Temperature On Aqueous Freeform Extrusion Fabrication, Jie Li, Ming-Chuan Leu, Greg Hilmas Aug 2015

Effects Of Temperature On Aqueous Freeform Extrusion Fabrication, Jie Li, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An experimental study was conducted to investigate the effect of temperature on ceramic parts produced by paste extrusion based additive manufacturing followed by sintering. A computer-controlled gantry system equipped with a piston extruder was used to extrude aqueous alumina paste. The system includes a temperature control subsystem that allows for freeform extrusion fabrication inside a low-temperature (<0°C) chamber. It can also be used for fabricating parts on a hot plate at ambient or higher temperatures (≥20°C). Test specimens were fabricated from aqueous aluminum pastes at -20°C in the low-temperature chamber and also on the hot plate at 40°C. The minimum angles achievable by these two processes for part fabrication, without use of support material, were compared. Also compared were the relative density and mechanical properties of the parts obtained after sintering. Microstructures were examined via scanning electron microscopy in order to obtain a deeper understanding of the effect of fabrication temperature.

Go to article

Modeling Of Powder Bed Processing -- A Review, Aaron Flood, Frank W. Liou Aug 2015

Modeling Of Powder Bed Processing -- A Review, Aaron Flood, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Many models have been developed to model powder beds and these methods can be implemented to model a powder bed for Selective Laser Sintering, Selective Laser Melting and any other technique of additive manufacturing which uses powder beds. Two of the main systems are the Discrete Element Method (DEM) and the Geometric Method. The purpose of this paper is to analyze each of the methods. It will first highlight how each of the models creates the powder bed. The next aspect reviewed is the computational time and its causes. And lastly, each of the methods will be examined for their …

Go to article

A Microstructure And Hardness Study Of Functionally Graded Materials Ti6al4v/Tic By Laser Metal Deposition, Jingwei Zhang, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer Aug 2015

A Microstructure And Hardness Study Of Functionally Graded Materials Ti6al4v/Tic By Laser Metal Deposition, Jingwei Zhang, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer

Materials Science and Engineering Faculty Research & Creative Works

Crack free functionally graded material (FGM) Ti6Al4V-TiC has been fabricated by laser metal deposition (LMD) using TiC and Ti6Al4V powder which were premixed for different ratios. This study focuses on the influence of laser processing parameters and TiC compositional distribution on microstructure, Vickers hardness and phase. The microstructure is analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and hardness tests. Primary carbide, eutectic carbide and unmelted carbide are found in the deposit area. When laser power increased, the primary and secondary dendrite arm spacing increased. The laser power and scanning speed did not influence the Vickers hardness distribution significantly.

Go to article

Methods Of Extrusion On Demand For High Solids Loading Ceramic Paste In Freeform Extrusion Fabrication, Wenbin Li, Amir Ghazanfari, Ming-Chuan Leu, Robert G. Landers Aug 2015

Methods Of Extrusion On Demand For High Solids Loading Ceramic Paste In Freeform Extrusion Fabrication, Wenbin Li, Amir Ghazanfari, Ming-Chuan Leu, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fabrication of highly dense parts with complex geometry by paste-extrusion-based solid freeform fabrication processes requires a precise control of the extrusion flow rate to dispense material on demand, which is often referred as Extrusion-On-Demand (EOD). The extrusion process for aqueous ceramic pastes is complex and difficult to control due to their non-Newtonian behavior, compressibility and inhomogeneity. In this study, three methods of EOD (based on ram extruder, needle valve, and auger valve) are introduced and investigated for the extrusion of high solids loading (i.e., > 50%, volumetric) aqueous alumina paste. Optimal extrusion process parameters for these methods are determined through printing …

Go to article

Parameter Determination And Experimental Validation Of A Wire Feed Additive Manufacturing Model, Kannan Suresh Kumar, Todd E. Sparks, Frank W. Liou Aug 2015

Parameter Determination And Experimental Validation Of A Wire Feed Additive Manufacturing Model, Kannan Suresh Kumar, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser metal deposition with wire feed is one of the additive manufacturing methods with great scope and robustness. Process parameters plays an important role in controlling the process and obtaining an ideal manufactured part. Simulations tools are highly essential in determining the ideal parameters and melt pool conditions. The current work is a transient 3D model of wire feed additive manufacturing which realizes the heat transfer and fluid flow behavior of the process with varying laser power and power density. The model was programmed in Python and a 1 KW Gaussian beam fiber laser was used to conduct experiments. The …

Go to article

Solid Freeform Fabrication Of Transparent Fused Quartz Using A Filament Fed Process, J. Luo, L. J. Gilbert, C. Qu, B. Morrow, Douglas A. Bristow, Robert G. Landers, J. Goldstein, A. Urbas, Edward C. Kinzel Aug 2015

Solid Freeform Fabrication Of Transparent Fused Quartz Using A Filament Fed Process, J. Luo, L. J. Gilbert, C. Qu, B. Morrow, Douglas A. Bristow, Robert G. Landers, J. Goldstein, A. Urbas, Edward C. Kinzel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Glass is a critical material for many scientific and engineering applications including optics, communications, electronics, and hermetic seals. Despite this technological relevance, there has been minimal research toward Additive Manufacturing (AM) of glass, particularly optically transparent glass. Additive Manufacturing of transparent glass offers potential advantages for lower processing costs for small production volumes, increased design freedom, and the ability to locally vary the optical properties of the part. Compared to common soda lime glass, fused quartz is better for AM since it has lower thermal expansion and higher index homogeneity. This paper presents a study of additive manufacturing of transparent …

Go to article

Depth Of Cut Monitoring For Hybrid Manufacturing Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou Aug 2015

Depth Of Cut Monitoring For Hybrid Manufacturing Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser Metal Deposition LMD is a hybrid manufacturing process consist of a laser deposition system combined with a 5-axis CNC milling system. During laser deposition many parameters and their interaction affect the dimensional accuracy of the part produced, powder flow rate, laser power and travel speed are some of these parameters. Sensing the acoustic emission during milling marching gives feedback information regarding depth of metal being cut subsequent part dimensions, if an error in dimensions is found certain actions, such as remaching, close loop control, or laser remelting can be carried out to correct it. Thus a reliable hybrid manufacturing …

Go to article

Numerical Solutions Of Generalized Burgers' Equations For Some Incompressible Non-Newtonian Fluids, Yupeng Shu Aug 2015

Numerical Solutions Of Generalized Burgers' Equations For Some Incompressible Non-Newtonian Fluids, Yupeng Shu

LSU New Orleans Theses and Dissertations

The author presents some generalized Burgers' equations for incompressible and isothermal flow of viscous non-Newtonian fluids based on the Cross model, the Carreau model, and the Power-Law model and some simple assumptions on the flows. The author numerically solves the traveling wave equations for the Cross model, the Carreau model, the Power-Law model by using industrial data. The author proves existence and uniqueness of solutions to the traveling wave equations of each of the three models. The author also provides numerical estimates of the shock thickness as well as maximum strain $\varepsilon_{11}$ for each of the fluids.

Go to article

Securemems: Selective Deposition Of Energetic Materials, Trevor J. Fleck, Josiah R. Thomas, Lillian F. Miles, Allison K. Murray, Zane A. Roberts, Raghav Ramachandran, I Emre Gunduz, Steven F. Son, George T. Chiu, Jeffrey F. Rhoads Aug 2015

Securemems: Selective Deposition Of Energetic Materials, Trevor J. Fleck, Josiah R. Thomas, Lillian F. Miles, Allison K. Murray, Zane A. Roberts, Raghav Ramachandran, I Emre Gunduz, Steven F. Son, George T. Chiu, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

There exists a pressing operational need to secure and control access to high-valued electromechanical systems, and in some cases render them inoperable. Developing a reliable method for depositing energetic materials will allow for the near-seamless integration of electromechanical systems and energetic material, and, in turn, provide the pathway for security and selective destruction that is needed. In this work, piezoelectric inkjet printing was used to selectively deposit energetic materials. Nanothermites, comprising of nanoscale aluminum and nanoscale copper oxide suspended in dimethyl-formamide (DMF), were printed onto silicon wafers, which enabled both thermal and thrust measurements of the decomposing energetic material. Various …

Go to article

Improvement Of Diesel Engines At High Speeds Via Flexible Valve Actuation And Cylinder Deactivation, Dina M. Caicedo Parra, Gregory M. Shaver, Aswin Ramesh Aug 2015

Improvement Of Diesel Engines At High Speeds Via Flexible Valve Actuation And Cylinder Deactivation, Dina M. Caicedo Parra, Gregory M. Shaver, Aswin Ramesh

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the U.S fuel consumption is expected to increase over 20% from 2010 to 2020 especially in the heavy duty segment. As a consequence of the increase in production of heavy and light duty vehicles, regulations and stricter policies are being applied to the emissions of pollutants, including NOx, and soot. This study outlines strategies for using cylinder deactivation and intake valve closure (IVC) modulation to improve fuel economy and increase the rate at which NOx/soot-mitigating aftertreatment devices reach working temperatures. Effects of opening and squeezing variable geometry turbine (VGT) turbocharger were also analyzed. From the results it was observed …

Go to article

Powder Compaction Simulation, Yuqi Fang, Caroline Baker, Marcial Gonzalez Aug 2015

Powder Compaction Simulation, Yuqi Fang, Caroline Baker, Marcial Gonzalez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Powders are one of most manipulated materials in many industries such as food, pharmaceutical, energy and metallurgical industries. An important process for the powders is the compaction into solids with small porosity or high relative density. However, powders exhibit complex behavior during this process. After rearrangement and jamming of the powder bed, many types of deformation mechanisms dominate the compaction of granular materials, including elastic and plastic deformation of each individual particle. Therefore, having a better understanding of macroscale and microscale properties of powder beds and single particles during the compaction process is necessary. In addition, to reduce cost and …

Go to article

Indentation Probing Of In Vitro Bovine Articular Cartilage: Effects On Chondrocyte Viability And Tissue Biomechanics, Pablo F. Argote, Alan Poon, Xin Xu Ph.D, Corey P. Neu Ph.D. Aug 2015

Indentation Probing Of In Vitro Bovine Articular Cartilage: Effects On Chondrocyte Viability And Tissue Biomechanics, Pablo F. Argote, Alan Poon, Xin Xu Ph.D, Corey P. Neu Ph.D.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Osteoarthritis (OA) consists of a degenerative disease on articular cartilage, which is prone to excessive mechanical loading and frictional resistance that leads to the wear and tear of the tissue. These factors result in the progressive and incurable disease that affects millions of people worldwide. The goal is to characterize chondrocyte viability and the in vitro biomechanical properties of articular cartilage in two confined indentation studies. One study looks at the chondrocyte viability over seven days. The second compares the immediate effects of strain rates on chondrocyte viability and tissue biomechanics. Bovine cartilage explants are harvested, cultured, and then 40% …

Go to article

Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa Aug 2015

Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa

The Summer Undergraduate Research Fellowship (SURF) Symposium

In 2014 gas turbine engine has reached a market value of 82.5 billion dollars, of which 59.5% are related to aircraft propulsion. The continuous market expansion attracts more and more the interest of researchers and industries towards the development of accurate numerical techniques to model thermodynamically the entire engine. This practice allows a performance and optimization analysis before the actual experimental testing, reducing the time and required investment in the design of a new engine. In this paper, a recently developed open source numerical tool named “Toolbox for the Modeling and Analysis of Thermodynamic Systems” (T-MATS) is used to assess …

Go to article

Efficient Exploration Of Quantified Uncertainty In Granular Crystals, Juan C. Lopez Ramirez, Marcial Gonzalez, Ilias Bilionis, Rohit K. Tripathy Aug 2015

Efficient Exploration Of Quantified Uncertainty In Granular Crystals, Juan C. Lopez Ramirez, Marcial Gonzalez, Ilias Bilionis, Rohit K. Tripathy

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular crystals present unique nonlinear properties that support standing waves. These depend on precompression and impurities. Thus, they can be used for different applications such as impact and shock dissipation. There are different models which rely on reasonable approximations and assumptions. While experimental results show good agreement with theory, there are experimental errors that are not easily explained and are usually attributed to the approximations made and phenomena that are not accounted for. This might be the result of not quantifying the uncertainty, since variables like the grain size, position, mass and Young modulus, of each particle, are uncertain. Building …

Go to article

Combustion Wave Propagation Enhancement Of A Nitrocellulose Solid Monopropellant, Omar R. Yehia, Shourya Jain, Li Qiao Aug 2015

Combustion Wave Propagation Enhancement Of A Nitrocellulose Solid Monopropellant, Omar R. Yehia, Shourya Jain, Li Qiao

The Summer Undergraduate Research Fellowship (SURF) Symposium

Improvement and control of the burning behavior and characteristics of solid fuels promise improved performance of systems ranging from solid rocket motors to microelectromechanical systems. Introducing methods to enhance combustion wave propagation velocities of solid propellants is a crucial step in realizing improved performance in rocket motors that use organic nitrate-based propellants. This work aims to enhance the burning characteristics of solid fuels through the use of thermally guided combustion waves. In order to increase the burning rate of solid nitrocellulose fuel layers, graphite sheets were used as thermally conductive bases in order to substantially improve heat transfer to unburned …

Go to article

Cell-Matrix Interactions During En Masse Cell Migration, Meng Zhuang, Altug Ozcelikkale, Bumsoo Han Aug 2015

Cell-Matrix Interactions During En Masse Cell Migration, Meng Zhuang, Altug Ozcelikkale, Bumsoo Han

The Summer Undergraduate Research Fellowship (SURF) Symposium

Extended wound care, including prolonged treatment of burn injuries, acute and chronic wounds, is a significant source of patient discomfort and financial burden to public healthcare programs. Both accelerated healing and prevention of scar formation are highly desired but remain to be challenging to achieve. This is primary due to limited understanding of interactions between cells and the surrounding extracellular matrix (ECM) during wound healing. Particularly, collective migration of fibroblasts through provisional matrix, so called en masse migration, is one of these interactions that play a critical role in later stages of granulation tissue formation and wound closure. In addition …

Go to article

First Prev Next Last