Mechanical Engineering Commons^™

Policies That Impact The Acceleration Of Electric Vehicle Adoption, Florida Solar Energy Center, Colleen Mccann Kettles

FSEC Energy Research Center®

To better understand the influence of policy initiatives that relate to electric vehicles (EVs) have on accelerated deployment, this project focused on a number of successful public and private initiatives and policies designed to encourage the adoption of EVs and related infrastructure. References to databases that keep pace with this rapidly evolving and transformative industry are included, and best practices for design of laws and incentives are provided.

Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging, Diego Fernandes Rodrigues, José Carlos Pereira

Journal of Applied Packaging Research

Packages made of corrugated paper are fundamental to the protection, transportation and handling of the appliance product market. During the storage and sales stages of a product, the package must resist compressive loads in different directions beyond moderate impacts. In this context, the objective of this work is to develop and implement a post-processor that allows the simultaneous analysis of two of the most common failure modes of packages made of corrugated paper: failure due to tensile or compressive stress limit, and failure due to local buckling, when the buckling of the faces of the corrugated paper between two peaks …

Simulation Of The Oxygen Reduction Reaction (Orr) Inside The Cathode Catalyst Layer (Ccl) Of Proton Exchange Membrane Fuel Cells Using The Kinetic Monte Carlo Method, Baosheng Bai, Yi-Tung Chen

Mechanical Engineering Faculty Research

In this paper, a numerical model of the kinetic Monte Carlo (KMC) method has been developed to study the oxygen reduction reaction (ORR) that occurs inside the cathode catalyst layer (CCL). Firstly, a 3-D model of the CCL that consists of Pt and carbon spheres is built using the sphere packing method; secondly, an efficient procedure of the proton-oxygen reaction process is developed and simulated. In the proton-oxygen reaction process, all of the continuous movements of protons and oxygen are considered. The maximum reaction distance is determined to be 8 Å. The input pressures of protons and oxygen are represented …

Deep Rc: Enabling Remote Control Through Deep Learning, Jaron Ellingson, Gary Ellingson, Tim Mclain

Student Works

Human remote-control (RC) pilots have the ability to perceive the position and orientation of an aircraft using only third-person-perspective visual sensing. While novice pilots often struggle when learning to control RC aircraft, they can sense the orientation of the aircraft with relative ease. In this paper, we hypothesize and demonstrate that deep learning methods can be used to mimic the human ability to perceive the orientation of an aircraft from monocular imagery.

This work uses a neural network to directly sense the aircraft attitude. The network is combined with more conventional image processing methods for visual tracking of the aircraft. …

Nonlocal Damage Mechanics For Quantification Of Health For Piezoelectric Sensor, Amit Shelke, Anowarul Habib, Umar Amjad, Ullrich Pietsch, Sourav Banerjee

Faculty Publications

In this paper, a novel method to quantify the incubation of damage on piezoelectric crystal is presented. An intrinsic length scale parameter obtained from nonlocal field theory is used as a novel measure for quantification of damage precursor. Features such as amplitude decay, attenuation, frequency shifts and higher harmonics of guided waves are commonly-used damage features. Quantification of the precursors to damage by considering the mentioned features in a single framework is a difficult proposition. Therefore, a nonlocal field theory is formulated and a nonlocal damage index is proposed. The underlying idea of the paper is that inception of the …

Modular Crates – A Holistic Design Approach For Optimizing Cube Size In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Global market is a field where all industries strive to provide personalized product for every customer demand in order to compete with their competitors in the business battlefield. Product personalization varies with customer to customer which increases the product variety. When the product size variability is vast, producing packages for every individual product is not only difficult but also increases the design time, production time, total manufacturing cost and inventory cost. For the present scenario, Industrial packages does not opt customizability for variable product sizes. Customized package for personalized product is achievable only by redesigning the existing distribution package with …

Application Of Computational Mbd For Simulation Of Wrap Packaging Performance, Niels Hojen Ostergaard, Stephane Danjou

Journal of Applied Packaging Research

This paper concerns evaluation of the performance of plastic wrap films applied for packaging engineering by numerical simulation. In particular, the feasibility of computational techniques as supporting tool for packaging testing is investigated. A wrap film model constituted by a web of point masses connected by springs and dampers is applied to a number of stacked box-shaped objects. These will be modeled as perfectly rigid using simulation techniques from 3D multibody dynamics. Contact mechanics are simulated by penalization methods. A simple example demonstrates the potential of the developed framework.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• MSME Graduate Student Selected for ASME Collegiate Council

Secondary Atomization During Droplet Impingement Of Water-Glycerol Admixtures On Heated Superhydrophobic Surfaces, Alexander White, Dr. Julie Crockett

Journal of Undergraduate Research

The purpose of the given document is to remind the reader of goals initially set in conjunction with the ORCA Grant project proposal in October 2016, to present experimental findings obtained during the grant period, and to discuss the results of the work and their implications for future investigations. As stated in the proposal, the main purpose of this ORCA project was to compare the droplet atomization (expulsion of a fine spray) of various water-glycerol mixtures upon impact on superheated, superhydrophobic surfaces. The major goal to that end was to use a certain unique experimental procedure in quantifying the data …

Functional Optimization Of Carbon Nanotubes, Taylor Davis, Sr. Brian Iverson

Journal of Undergraduate Research

The objective of this project was to create, characterize, and optimize carbon nanotube (CNT) films as a surface functionalization strategy through modifying the growth, infiltration, and patterning during fabrication.

Carbon nanotubes have drawn attention in various disciplines in the scientific community because of their incredible strength, hardness, wettability (hydrophobicity), as well as their kinetic and electrical properties. At BYU specifically, they are being used in diverse applications including fabrication of superhydrophobic surfaces and interdigitated electrode biosensors.

Carbon nanotubes can be delicate with a diameter of only a few nanometers when grown. However, the process of carbon infiltration can be used …

Sunflowers, Solar Panels, And Beeswax: Improving Solar Power For The Developing World, Ivyann Oveson Running, Dr. John Salmon

Journal of Undergraduate Research

Inspired by the mechanics of how sunflowers follow the sun, we designed a system to increase output from solar panels by only using simple mechanics and beeswax. Solar power is becoming increasingly popular even in developing countries. We wanted to create a way to increase the power output of solar panels in such areas that lack technical support for current panel rotating mechanisms. When temperatures increase, beeswax expands, and we harness the motion by filling a piston with the beeswax. We use this motion to cause solar panels to turn, following the sun throughout the day and increasing electrical output.

Estimating Joint Configuration For Soft Robots, Jacob Olson, Dr. Marc Killpack

Journal of Undergraduate Research

Soft robotics are still a relatively new technology. As seen in Figure 1, they are made entirely from compliant materials that use pressurized fluid for both structure and actuation. These robots have great potential in the world of robotics. Soft robots can excel in many areas where rigid robots fall short due to their incredible compliance and low inertia. As soft robotic technologies develop, robots will be much less limited in the scope of what they can do without risk of human injury. They will be able to do tasks working more closely with humans in current industries, and be …

Static And Dynamic Obstacle Avoidance For Small Uav, Michael Farrell, Dr. Tim Mclain

Journal of Undergraduate Research

Unmanned aerial vehicles (UAV) are becoming increasingly prevalent in society today. One of the most important problems for such vehicles is obstacle avoidance. Common applications for small UAV require them to navigate through an environment containing many obstacles, both static and dynamic. As part of the 2017 SUAS-AUVSI undergraduate competition, this common problem was simulated with several virtual stationary and moving objects that were to be avoided during flight. The purpose of this research project was to develop a robust obstacle avoidance algorithm to be demonstrated during the mission demonstration of the 2017 SUAS-AUVSI competition.

A Biomechanical Comparison Of A Low-Profile Mesh Plate Contrasted With Tension Band Wiring Treatment Of Olecranon Fractures And Osteotomies, Jasmin Regalado

Mechanical Engineering ETDs

Olecranon fractures are common upper extremity injuries caused by direct trauma to the elbow. Open reduction and internal fixation is the current standard for olecranon fractures that exceed a 2 mm fragment displacement. The tension band wire (TBW) technique is the current standard of care for treating olecranon fractures due to its positive clinical results. However, the complication rate due to prominent hardware is reported to be upwards of 50\%. This research aims to biomechanically test and compare the stiffness and fracture gap of the traditional TBW technique to a low-profile titanium mesh plate (TMP) for chevron-type fractures and osteotomies …

Refining Statistical Magnesium Models Via Machine Learning, Andrew Orme, Dr. David Fullwood

Journal of Undergraduate Research

Magnesium is a potential replacement for steels and aluminum in strength applications. Despite desirable strength and weight properties, magnesium is costly to manufacture. To reduce manufacturing costs, extensive research has been done on is a phenomenon called twinning, where a large group of magnesium atoms collectively reorient from a base orientation to a new orientation. This reorientation caused by twinning has the potential to enable easier material deformation, allowing for less costly manufacturing. Our research group pursued a novel approach to twinning research by using data mining and machine learning algorithms. Data collected from samples of magnesium using a scanning …

Rigidly Foldable Origami Flashers Based On Curved-Fold Model, Jacob Badger, Dr. Larry Howell

Journal of Undergraduate Research

The purpose of my research was to explore the application of curved folding in designing rigid-foldable deployable mechanisms. In recent years, origami fold patterns known as “flashers” have been investigated for their ability to efficiently pack deployable surfaces. While many patterns have been investigated, none are capable of folding surfaces composed of rigid panels that bend only along crease lines. We hoped to identify one such rigid-foldable flasher by basing it on a curved-fold pattern known as a logarithmic spiral flasher.

Above Knee Prosthetic Socket For Developing Countries, Colton Graham, Dr. Mark Colton

Journal of Undergraduate Research

Due to a civil war in Sierra Leone many have been left with amputated limbs. In order to provide the required prosthetic limbs for victims who have above the knee amputations they need a quality custom fit socket. Custom fit sockets are very expensive so we created a universal socket meant to comfortably fit everyone. This socket is also designed to be affordable and able to be manufactured in Sierra Leone. For a functional socket, it is to be custom fitted, durable, affordable, adjustable and comfortable for the amputee. Due to varying changes to the volume of the residual limb, …

Carbon Nanotube Filtration Device: Separating Oil From Fracking Waste, Phillip Ng, Dr. Anton Bowden

Journal of Undergraduate Research

Pyrolytic Carbon Infiltration Carbon Nanotubes (CI-CNTs) can isolate water and oil molecules due to its superhydrophobic and oleophilic properties, unique cylindrical nanostructure, and functional groups¹. Because the waste produced from fracking is nonreusable due to the molecular oil droplets contained in it, the waste is typically injected back underground, which pollutes safe drinking water². This can be avoided with an inexpensive and efficient oil and water filter. The mentored research project revolved around a CI-CNT filter used to salvage waste created from fracking.

The design of a CI-CNT device was approached by three main considerations: a …

Gas Detection System For Biomass Cookstove Emissions, Cyra Bishop, Jeffery Smith, Dr. Matthew Jones

Journal of Undergraduate Research

The purpose of this research project is to explore Peruvian social and cultural behaviors that typically prevent successful improved cookstove adoption in resource-limited settings as well as suggest ways to educate locals about the benefits of improved cookstoves. This will be done by constructing a cost-effective, easy-to-use gas-detection sensor system capable of measuring concentrations of harmful gases released from biomass cookstoves typically found in Peruvian communities.

Strong And Tough Continuous Nanofibers, Yuris Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Amethod of fabricating a continuous nanofiber is described . The method includes preparing a solution of one or more polymers and one or more solvents and electrospinning the solution by discharging the solution through one or more liquid jets into an electric field to yield one or more continuous nanofibers . The electrospinning process ( i ) highly orients one or more polymer chains in the one or more continuous nanofibers along a fiber axis of the one or more continuous nanofibers , and ( ii ) suppresses polymer crystallization in the one or more continuous nanofibers . The one …

Nonprehensile Manipulation Of Deformable Objects: Achievements And Perspectives From The Rodyman Project, Aykut C. Satici

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The goal of this work is to disseminate the results achieved so far within the RODYMAN project related to planning and control strategies for robotic nonprehensile manipulation. The project aims at advancing the state of the art of nonprehensile dynamic manipulation of rigid and deformable objects to future enhance the possibility of employing robots in anthropic environments. The final demonstrator of the RODYMAN project will be an autonomous pizza maker. This article is a milestone to highlight the lessons learned so far and pave the way towards future research directions and critical discussions.

Crystal Misorietation And Defect Generation During Contact Between Two Aluminum Substrates, Milad Khajehvand

Mechanical Engineering Master's Theses

With the use of molecular dynamics simulations, the nanoscale contact between two aluminum substrates at room temperature is studied. The so-called jump-to-contact (JC) phenomenon between (111) surfaces is observed to occur for interfacial distances below 5.8 ± 0.05 Å. This critical distance is approximately equal to 2.5 times the interplanar spacing of (111) planes in a perfect aluminum crystal at 300 K. The critical distance for JC is shown to be higher at higher contact temperatures because of the higher amplitude of atomic vibrations. The effect of employed interatomic potential on the critical distance is also discussed.

The critical distance …

The Effect Of Ultrasonic Power In Aluminum Wire Bonding Hardness Profiles, Matthew D. Mckay

Mechanical Engineering Master's Theses

Ultrasonic wire bonding is a critical process used widely across the microelectronics industry. Despite its ubiquity, there is a breadth of literature and ongoing active research into the basic principles of wire bonding. In particular, the effects of ultrasonic bonding on material properties are not fully understood. This thesis presents the effects of different ultrasonic bond powers on material properties. The changes in mechanical properties were measured by collecting Vickers microhardness data and nanoindentation data. The hardness in the bonded wire varied with two parameters: the distance from the bond interface, and the applied ultrasonic power. The hardness varied 5 …

Capturing The Competing Influence Of Thermal And Mechanical Loads On The Strain Of Turbine Blade Coatings Via High Energy X-Rays, Albert Manero, Kevin Knipe, Janine Wischek, Carla Meid, John Okasinski, Jonathan Almer, Anette M. Karlsson, Marion Bartsch, Seetha Raghavan

Mechanical Engineering Faculty Publications

This paper presents findings of synchrotron diffraction measurements on tubular specimens with a thermal barrier coating (TBC) system applied by electron beam physical vapor deposition (EB-PVD), having a thermally grown oxide (TGO) layer due to aging in hot air. The diffraction measurements were in situ while applying a thermal cycle with high temperature holds at 1000 °C and varying internal air cooling mass flow and mechanical load. It was observed that, during high temperature holds at 1000 °C, the TGO strain approached zero if no mechanical load or internal cooling was applied. When applying a mechanical load, the TGO in-plane …

Ultrafast X-Ray Imaging Of Laser-Metal Additive Manufacturing Processes, Niranjan D. Parab, Cang Zhao, Ross Cunningham, Luis I. Escano, Kamel Fezzaa, Wes Everhart, Anthony D. Rollett, Lianyi Chen, Tao Sun

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The high-speed synchrotron X-ray imaging technique was synchronized with a custom-built laser-melting setup to capture the dynamics of laser powder-bed fusion processes in situ. Various significant phenomena, including vapor-depression and melt-pool dynamics and powder-spatter ejection, were captured with high spatial and temporal resolution. Imaging frame rates of up to 10 MHz were used to capture the rapid changes in these highly dynamic phenomena. At the same time, relatively slow frame rates were employed to capture large-scale changes during the process. This experimental platform will be vital in the further understanding of laser additive manufacturing processes and will be particularly …

Deformation Of A Ferrofluid Droplet In Simple Shear Flows Under Uniform Magnetic Fields, Md Rifat Hassan, Jie Zhang, Cheng Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We numerically investigate the deformation and orientation of a ferrofluid droplet in a simple shear flow under a uniform magnetic field. The numerical simulation is based on the finite element method and couples the magnetic and flow fields. A level set method is used to model the dynamic motion of the droplet interface. Systematic numerical simulations are used to assess the effects of the direction and the strength of the magnetic field. Focusing on low Reynolds number flows (Re ≲ 0.02), the numerical results indicate that at a small capillary number (Ca ≈ 0.02), the magnetic field dominates over the …

Locomotion Of A Cylindrical Rolling Robot With A Shape Changing Outer Surface, Michael G. Puopolo, Jamey D. Jacob, Emilio Gabino

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A cylindrical rolling robot is developed that generates roll torque by changing the shape of its flexible, elliptical outer surface whenever one of four elliptical axes rotates past an inclination called trigger angle. The robot is equipped with a sensing/control system by which it measures angular position and angular velocity, and computes error with respect to a desired step angular velocity profile. When shape change is triggered, the newly assumed shape of the outer surface is determined according to the computed error. A series of trial rolls is conducted using various trigger angles, and energy consumed by the actuation motor …

Me-Em Enewsbrief, September 2018, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Mathematical Modeling And Empirical Validation Of A Conceptual Exoskeleton For Astronaut Glove Augmentation, Joseph Kissling

Masters Theses

Space presents numerous difficulties for astronauts conducting their work, not the least of which is the spacesuit that is worn to protect them from space. It has long been known that a spacesuit is difficult to work in, especially the rigid and pressurized gloves that put strain on the astronaut's hands, frequently leading to injuries. Astronaut gloves inhibit more than 50% of their strength in some cases [1]. NASA and other space agencies have been working to alleviate these problems by attempting to mechanically augment the gloves to reduce the exertions of the astronaut. To date, no augmentation systems have …

Shape-Based Separation Of Micro-/Nanoparticles In Liquid Phases, Behrouz Behdani, Saman Monjezi, Mason J. Carey, Curtis G. Weldon, Jie Zhang, Cheng Wang, Joontaek Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The production of particles with shape-specific properties is reliant upon the separation of micro-/nanoparticles of particular shapes from particle mixtures of similar volumes. However, compared to a large number of size-based particle separation methods, shape-based separation methods have not been adequately explored. We review various up-to-date approaches to shape-based separation of rigid micro-/nanoparticles in liquid phases including size exclusion chromatography, field flow fractionation, deterministic lateral displacement, inertial focusing, electrophoresis, magnetophoresis, self-assembly precipitation, and centrifugation. We discuss separation mechanisms by classifying them as either changes in surface interactions or extensions of size-based separation. The latter includes geometric restrictions and shape-dependent transport …