Mechanical Engineering Commons^™

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

Sonoprobe, Christian Miles Barrett

All Undergraduate Projects

The current ultrasound probes used in hospitals today use the same design produced in the mid 90s. Ultrasound probes consist of a transducer at the end of a handle. To perform an exam, an ultrasound technician (sonographers) must manipulate the probe at the wrist. To produce a clear image, the technician must apply pressure against the patient at different angles. Due to the extensive rotational movement and pressure the wrist takes when scanning a patient with an ultrasound probe, there is a high rate of carpal tunnel and other wrist injuries in sonographers. This new ultrasound probe will take the …

Ua66/1/5 Ogden College Of Science & Engineering Dean's Office Centers, Wku Archives

WKU Archives Collection Inventories

Records created by and about centers associated with the Dean's office in the Ogden College of Science & Engineering.

Ua1c2/37 Facilities Services & Heating Plant Photos, Wku Archives

WKU Archives Collection Inventories

Images of Facilities Services and the Heating Plant.

Calculation Methods Of Radon-222 Radiological Activity For Norm Plant With Ventilation, Pedro M. Dieguez-Elizondo, Paul G. O'Donohoe, Tomas Gil-Lopez, Juan Castejon-Navas, Miguel A. Gálvez-Huerta

Articles

A procedure is proposed to determine the radiological activity of air present in the working area of a NORM (Naturally-Occurring Radioactive Materials) plant. This NORM plant is located in the United Arab Emirates and is dedicated to the recycling of material and equipment used in oil extraction facilities. Substantial quantities of NORM waste will be present inside the enclosed plant facilities and will exhale significant amounts of Radon-222 into the working environment. The continued inhalation of this gas and its progeny has been shown to cause lung cancer. In order to reduce the concentration level of the aforementioned gas to …

Improving The Energy Efficiency Of Petrochemical Plant Operations: A Measurement And Verification Case Study Using A Balanced Wave Optimizer, Eve Man Hin Chan, Kar-Kit Chu, Hin-Fung Chow, Chi-Wing Tsang, Danny Chi Kuen Ho, Shuk-Kei Ho

Faculty of Science & Technology (THEi)

The Chinese petrochemical industry is facing pressure to meet strict targets of energy consumption and carbon emission reductions. Water pumps are the primary equipment used in most chemical and agrochemical industries sectors since water is commonly used for cooling and heating purposes, but these pumps also consume a large amount of energy. Other uses of water pumps in these industries include producing steam for heating, preparing reaction media or absorptive reagents, rinsing products, and distilling. As for the electrical components of the water pump systems, current technologies of variable frequency drives and superconducting transmission lines are unable to increase the …

A Novel 3d Simulation Model For Investigating Liquid Desiccant Dehumidification Performance Based On Cfd Technology., Tao Wen, Yimo Luo, Lu Lin

Faculty of Science & Technology (THEi)

Previous 2D CFD simulation models fail to elaborate the actual simultaneous flow and dehumidification process in liquid desiccant cooling system. Accordingly, the present study successfully developed a novel 3D simulation model for investigating the liquid desiccant dehumidification performance of a falling film dehumidifier. The penetration mass transfer model was implemented in the simulation to account for the interfacial dehumidification process. Experimental system was built for the model validation and the results indicated that the newly developed 3D CFD model could predict the absolute moisture removal accurately with an average deviation of 7%. Parametric study revealed that the dehumidification performance was …

Study On The Performance Of Distributed Energy Systems Based On Historical Loads Considering Parameter Uncertainties For Decision Making., Chong Zhang, Xue Xue, Qianzhou Du, Yimo Luo, Wenjie Gang

Faculty of Science & Technology (THEi)

Distributed energy systems (DESs) are becoming increasingly popular because of their high-energy efficiency and low pollution emissions. Accurate performance evaluation of such systems is critical for processes at the early design stages. However, there are considerable uncertainties in terms of the parameters used for performance evaluation and design optimization, including component efficiencies, customer demands, and energy markets. These uncertainties can significantly influence the performance of DESs. Without consideration of these uncertainties, the performance of DESs can be overestimated or underestimated, which leads to inaccurate decision-making. Therefore, this paper presents a comprehensive evaluation of the performance of DESs by considering uncertainties …

Flexible Integration Of Liquid Air Energy Storage With Liquefied Natural Gas Regasification For Power Generation Enhancement, Xiaohui She, Tongtong Zhang, Lin Cong, Xiaodong Peng, Chuan Li, Yimo Luo, Yulong Ding

Faculty of Science & Technology (THEi)

Liquid Air Energy Storage (LAES) is one of the most promising energy storage technologies for achieving low carbon emissions. Our research shows that the LAES produces a considerable amount of excess heat that cannot be cost-effectively utilised in a standalone LAES system. On the other hand, the regasification of liquefied natural gas (LNG) often leads to waste of a large amount of high-grade cold energy. Therefore, this paper proposes the integration of the LAES with the LNG regasification process via a Brayton cycle (denoted as LAES-Brayton-LNG), where pressurized propane is used as both the heat transfer fluid and storage material …

A Review Of Renewable Energy Assessment Methods In Green Building And Green Neighborhood Rating Systems, Chong Zhang, Chengliao Cui, Ying Zhang, Jiaqi Yuan, Yimo Luo, Wenjie Gang

Faculty of Science & Technology (THEi)

Green buildings and neighborhoods can help mitigate impacts of buildings on the environment, society and economy. Many rating systems or tools have been developed worldwide to assess and certificate green buildings or green neighborhoods. Renewable energy plays an important role in achieving green buildings/neighborhoods or zero energy buildings/neighborhoods by reducing fuel consumption and pollution emissions. However, substantial differences exist in assessing or quantifying the renewable energy in green building/neighborhood rating systems. This paper therefore provides a comprehensive review on renewable energy assessment methods adopted in green building/neighborhood rating systems, which would be very helpful to understand and then improve the …

Advanced Processing Of Nickel-Titanium-Graphite Based Metal Matrix Composites, Amit K. Patil

ETD Archive

A new class of in situ titanium carbide (TiC)/graphite (C) reinforced nickel matrix composites with variation in composition particularly varying C/Ti ratio have been processed using two different processing techniques. Firstly, via mechanical alloying (MA) followed by spark plasma sintering (SPS), i.e. solid-state processing. Secondly, using Laser engineered net shaping (LENSTM) technique, i.e. metal additive manufacturing technique. Mechanical alloying has gained special attention as a powerful non-equilibrium process for fabricating amorphous and nanocrystalline materials, whereas spark plasma sintering is a unique technique for processing dense and near net shape bulk alloys with homogeneous microstructure. Laser engineered net shaping (LENSTM) is …

Comparison Of Position Control With And Without Friction On A Foot Interface, Ryder Winck, Brandon Rudolph

Faculty Publications - Mechanical Engineering

No abstract provided.

Planar Motion Structures Modeling And Simulation With Mekin2d Subroutines, Eric Constans, P Simionescu, Nicola Golfari

Faculty Publications - Mechanical Engineering

No abstract provided.

Multiphase Cfd Modelling And Piv Validation Of A Uasb Reactor, Camila D' Bastiani, Jéferson Luis Alba, Gabriel Tomazzoni Mazzarotto, Severino Rodrigues De Farias Neto, Lademir Luiz Beal, Anthony Reynolds, David Kennedy

Conference Papers

Upflow anaerobic sludge blanket (UASB) reactors stand out as a feasible option for treating wastewaters while generating a valuable amount of biogas. It is known that the efficiency of UASB reactors is closely linked to its hydrodynamics. Therefore, understanding the role of each phase (solids, liquid and gas) in the mixing conditions inside the reactor and having validated numerical models for predicting the flow behavior has become fundamental for the design and optimization of UASB reactors. In this context this work aims to develop and validate a three phase Computational Fluid Dynamics (CFD) model of an UASB reactor. Eulerian-Eulerian laminar …

Mechanical And Aerospace Engineering, 2018-2019, College Of Engineering And Applied Sciences

Mechanical and Aerospace Engineering News

• Letter from the Chair
• Introducing Dr. Zachary D. Asher
• Department of Mechanical and Aerospace Engineering develops an engineering flight simulator
• Gear Sliding Loss Prediction
• Ph.D. student receives the prestigious NASA Earth and Space Science Fellowship
• NSF grant allows important materials research
• Student receives scholarship from gear industry
• Development of low cost/high volume micro/nano sensors and actuators
• Liou receives $204,000 NSF grant for neurological research
• Alexander Porter inducted into the Alumni Excellence Academy

A Low-Cost, Open-Source Digital Stripchart Recorder For Chromatographic Detectors Using A Raspberry Pi, Eric Constans, Samuel Foster, Michael Alirangues, Joseph Naese, James Grinias

Faculty Publications - Mechanical Engineering

No abstract provided.

Planar Motion Structures Modeling And Simulation With Mekin2d Subroutines, Eric Constans, P Simionescu, Nicola Golfari

Faculty Publications - Mechanical Engineering

No abstract provided.

The Scaling Limit Of The Membrane Model, Alessandra Cipriani, Biltu Dan, Rajat Subhra Hazra

Journal Articles

On the integer lattice, we consider the discrete membrane model, a random interface in which the field has Laplacian interaction. We prove that, under appropriate rescaling, the discrete membrane model converges to the continuum membrane model in d ≥ 2. Namely, it is shown that the scaling limit in d = 2, 3 is a Holder continuous random field, while in d ≥ 4 the membrane model converges to a random distribution. As a by-product of the proof in d = 2, 3, we obtain the scaling limit of the maximum. This work complements the analogous results of Caravenna and …

Comparison Of Position Control With And Without Friction On A Foot Interface, Ryder Winck, Brandon Rudolph

Faculty Publications - Mechanical Engineering

No abstract provided.

Bipedal Model And Hybrid Zero Dynamics Of Human Walking With Foot Slip, Mitja Trkov, Kuo Chen, Jingang Yi

Henry M. Rowan College of Engineering Departmental Research

Foot slip is one of the major causes of falls in human locomotion. Analytical bipedal models provide an insight into the complex slip dynamics and reactive control strategies for slip-induced fall prevention. Most of the existing bipedal dynamics models are built on no foot slip assumption and cannot be used directly for such analysis. We relax the no-slip assumption and present a new bipedal model to capture and predict human walking locomotion under slip. We first validate the proposed slip walking dynamic model by tuning and optimizing the model parameters to match the experimental results. The results demonstrate that the …

Coupling Numerical Analysis Of Vibration And Thermal Buckling Of An Automotive Brake Disc, Joseph-Shaahu Shaahu

Electronic Theses and Dissertations

An engaged brake system generates high temperature gradients in the brake rotor and brake pads. This high temperature gradient in turn induces thermal buckling. During high speed rotation, vibration is likely to occur in the system. In terms of a brake disc vibration will occur when there is a misalignment of the brake disc or thermoelastic instability (hot spot) forms on the brake rotor. Coupled and uncoupled problems of thermal buckling and vibration of a brake disc are analyzed and presented using finite element analysis in this paper. Thermal buckling depends on the direction of the high temperature gradient. Having …

From Statistical Correlations To Stochasticity And Size Effects In Sub-Micron Crystal Plasticity, Hengxu Song, Stefanos Papanikolaou

Faculty & Staff Scholarship

Metals in small volumes display a strong dependence on initial conditions, which translates into size effects and stochastic mechanical responses. In the context of crystal plasticity, this amounts to the role of pre-existing dislocation configurations that may emerge due to prior processing. Here, we study a minimal but realistic model of uniaxial compression of sub-micron finite volumes. We show how the statistical correlations of pre-existing dislocation configurations may influence the mechanical response in multi-slip crystal plasticity, in connection to the finite volume size and the initial dislocation density. In addition, spatial dislocation correlations display evidence that plasticity is strongly influenced …

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

Computational Fluid Dynamics Investigation Of A Novel Hybrid Comprehensive Stage Ii Operation For Single Ventricle Palliation, Marwan Hameed

Electronic Theses and Dissertations

Hypoplastic left heart syndrome (HLHS) is a type of heart defect where the left ventricle is underdeveloped or not developed, resulting in only a single functioning right ventricle. Approximately 7.5% of patients with congenital heart disease are born with a single ventricle (SV) which is accompanied by a spectrum of other malformations such as atrophied ascending aorta, atrial septal defects, and ventricular septal defects (VSD). The existing three-hybrid staged surgical approach serving as a palliative treatment for this anomaly entails multiple complications and achieves a survival rate of only 50%. To reduce the trauma associated with the second stage of …

A Low-Cost, Open-Source Digital Stripchart Recorder For Chromatographic Detectors Using A Raspberry Pi, Eric Constans, Samuel Foster, Michael Alirangues, Joseph Naese, James Grinias

Faculty Publications - Mechanical Engineering

No abstract provided.

Compressible And Choked Flows In Rotating Passages, Nolan J. Dyck, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Numerical Approach For Determining The Resistance Of Fine Mesh Filters, Anthony Sherratt, Christopher T. Degroot, Anthony G. Straatman, Domenico Santoro

Mechanical and Materials Engineering Publications

No abstract provided.

Robust Impedance Control Of A Four Degree Of Freedom Exercise Robot, Santino Joseph Bianco

ETD Archive

The CSU 4OptimX exercise robot provides a platform for future research into advanced exercise and rehabilitation. The robot and its control system will autonomously modify reference trajectories and impedances on the basis of an optimization criterion and physiological feedback. To achieve this goal, a robust impedance control system with trajectory tracking must be implemented as the foundational control scheme. Two control laws will be compared, sliding mode and H-infinity control. The above robust control laws are combined with underlying impedance control laws to overcome uncertain plant model parameters and disturbance anomalies affecting the input signal. The sliding mode control law …

A Reticulation Of Skin-Applied Strain Sensors For Motion Capture, Christopher A. Schroeck

ETD Archive

The purpose of this research is to develop a system of motion capture based on skin-applied strain sensors. These elastic sensors are of interest because they can be applied to the body without restricting motion and are well suited to operate in more practical environments, such as sports fields, gymnasiums, and outdoor areas. This combination is currently not available in the field of motion capture. The current issues with strain sensor motion capture technology is the accurate is not sufficient for motion analysis and axial rotation monitoring of joints is not available. This project will build and test a sensor …

Robotic Devicewith Compact Joint Design And Related Systems And Methods, Tom Frederick, Eric Markvicka, Shane Michael Farritor, Dmitry Oleynikov

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various robotic and/or in vivo medical devices having compact joint configurations. Other embodiments relate to various medical device components, including forearms having grasper or cautery end effectors, that can be incorporated into certain robotic and/or in vivo medical devices.