Power and Energy Commons^™

Analytical Model Of The Ac-Ac Dab Converter In The Egam Framework, Arnold A. Fernandes, Kartikeya Jayadurga Prasad Veeramraju, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

This paper develops an analytical model of the bidirectional AC-AC Dual Active Bridge (DAB) converter. The passive components of the AC-AC DAB are subject to grid, switching, and sideband harmonics. Thus, it is impossible to model via the conventional Generalized Average Method (GAM). It has been numerically shown that Extended GAM (EGAM) can be used to model the AC-AC DAB converter. In this paper, an analytical sixteenth order EGAM-model has been developed that considers only grid harmonics at the filter components and only sideband harmonics for the transformer leakage inductor. A closed-form expression is developed for the 2D convolution product. …

A High Step-Up Soft-Switched Converter Based On Coupled Inductor And Current-Fed Voltage Multiplier, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel non-isolated DC-DC converter that combines coupled inductor (CI) and voltage multiplier (VM) techniques is proposed. The leakage energy of the CI is effectively recycled, and soft-switching conditions are achieved for all switches and diodes. Resonance between the leakage inductor of the CI and VM capacitors provides soft-switching conditions, without requiring a separate resonant tank. The use of VM stages not only lowers the voltage stress on semiconductor components but also allows for the use of low-voltage-rated devices, leading to reduced conduction losses, lower cost, and improved efficiency. High voltage gain can be achieved by appropriately …

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

Optimizing Material Selection And Operational Conditions For Xhv Systems: Lessons From Aisi 1020 And 316l Comparative Studies, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

In this study, AISI 1020 low-carbon steel was investigated as a cost-effective alternative to SS316L stainless steel for reaching extreme high vacuum (XHV) conditions. After being baked at 400°C, a vacuum chamber made of low-carbon steel material exhibited an outgassing rate approximately 2000 times smaller than a similar chamber made of stainless steel. Its activation energy for hydrogen diffusion (27 kJ/mol) is less than half that of stainless steel (60.3 kJ/mol), indicating more efficient hydrogen removal during bakeout. MolFlow+ simulations supported the experimental data and demonstrated the importance of system geometry optimization and minimizing stainless steel content for achieving optimal …

A Comprehensive Review Of Piezoelectric Pvdf Polymer Fabrications And Characteristics, Nadia Ahbab, Sidra Naz, Tian-Bing Xu, Shihai Zhang

Mechanical & Aerospace Engineering Faculty Publications

Polyvinylidene fluoride (PVDF) polymer films, renowned for their exceptional piezoelectric, pyroelectric, and ferroelectric properties, offer a versatile platform for the development of cutting-edge micro-scale functional devices, enabling innovative applications ranging from energy harvesting and sensing to medical diagnostics and actuation. This paper presents an in-depth review of the material properties, fabrication methodologies, and characterization of PVDF films. Initially, a comprehensive description of the physical, mechanical, chemical, thermal, electrical, and electromechanical properties is provided. The unique combination of piezoelectric, pyroelectric, and ferroelectric properties, coupled with its excellent chemical resistance and mechanical strength, makes PVDF a highly valuable material for a wide …

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual …

Assessing Tidal Energy Potential In The Visayas: Viability Of The San Bernardino, San Juanico, And Cebu Straits, Justin Kyle O. Ricafort, King Harold A. Recto

Sustainability, Disaster Science and Energy

By laying the groundwork for sustainable tidal energy infrastructure, this study contributes to advancing the Philippines' renewable energy portfolio and supports the global transition to clean energy solutions. With the country's extensive coastline and rising energy demands, tidal energy presents a largely underutilized yet promising resource that can address both local and global energy challenges. Tidal energy is highly predictable, stable, and environmentally friendly, offering a reliable alternative to conventional energy sources like coal and natural gas, which are often subject to price volatility and environmental concerns. The study focuses on the Visayas region, a prime candidate for tidal energy …

Autonomous Vehicle Platooning, Tony Abelson

McNair Summer Research Program

This research investigates the construction and performance optimization of two autonomous vehicles with using "Platooning," a strategy aimed at reducing fuel consumption and enhancing transportation efficiency. Platooning allows one vehicle to follow another closely, minimizing aerodynamic drag and improving fuel economy. This study addresses the growing need for sustainable transportation solutions in the context of increasing urbanization and environmental concerns, emphasizing the importance of efficient autonomous vehicle operation. The primary objectives of this research are to assemble autonomous vehicles from scratch and to optimize their performance in both individual and platoon operations. The methodology involves using Traxxas Slash chassis and …

Multiphysics Modeling Of Solid Oxide Fuel Cells For Gradient Minimization And Inductive Loop Analysis In Impedance Spectroscopy Using Machine Learning-Based Microstructural Property Estimation, Muhammad Usman Khan

College of Graduate Studies: Theses & Dissertations

Solid oxide fuel cells have significant advantages in renewable energy utilization due to their high efficiency, fuel flexibility, and low emissions. However, despite the numerous efforts of technology, thermal and current density gradients and impedance behavior fluctuations are still causing performance degradation. A combined computational framework that integrates machine learning and three-dimensional Multiphysics modeling is needed to investigate and optimize the performance of solid oxide fuel cells. A machine learning model, trained on synthetic microstructure data by percolation analysis, is used to predict important microstructural parameters like triple phase boundary density and geometric tortuosity. These are then employed in a …

Modeling And Analysis Of Amorphous Steel Transformer For Potential Loss Reduction In Power Systems., Daniel A. Muchow

Theses and Dissertations--Electrical and Computer Engineering

The energy consumed in power systems can be reduced directly by implementing new technologies and materials. The effort to reduce the carbon emissions expelled from the production of electrical energy has become a major focus. According to the U.S. energy Information Administration approximately 5% of all the electric generated and transmitted in the U.S. electrical grid is lost. The energy profile calculated from the usage of electrical power from all 50 states in 2021 is estimated to be 3.8 billion megawatts per hour, with a state average of just over 11 cents per MWh, producing just over 41.8 billion in …

Age Of Information-Based Optimal Scheduling With Energy Cost Trade-Off For Smart Warehouse: A Deep Reinforcement Learning-Based Approach, Sandip Roy, Abhishek Bisht, Ashok Kumar Das, Sachin Shetty

VMASC Publications

Recent advances in the integration of high-speed mobile networks and real-time IoT devices have facilitated in building of smart warehouses, where a set of beacons and Internet of Things (IoT) devices (or source nodes) can monitor the status of various physical processes in a time-critical way. In real-time status monitoring systems, like smart warehouses, quantifying the freshness of the Internet of Things (IoT) data based on the age of information (AoI) metrics becomes quite crucial. As source nodes are battery-constrained, a balanced trade-off between AoI minimization and preservation of source node battery energy is essential. In this paper, in a …

A Comparative Analysis Of Preprocessing Filters For Deep Learning-Based Equipment Power Efficiency Classification And Prediction Models, Sang-Ha Sung, Chang-Sung Seo, Michael Pokojovy, Sangjin Kim

Mathematics & Statistics Faculty Publications

The quality of input data is critical to the performance of time-series classification models, particularly in the domain for industrial sensor data where noise and anomalies are frequent. This study investigates how various filtering-based preprocessing techniques impact the accuracy and robustness of a Transformer model that predicts power efficiency states (Normal, Caution, Warning) from minute-level IIoT sensor data. We evaluated five techniques: a baseline, Simple Moving Average, Median filter, Hampel filter, and Kalman filter. For each technique, we conducted systematic experiments across time windows (360 and 720 min) that reflect real-world industrial inspection cycles, along with five prediction offsets (up …

Fabrication Of Thylakoid Membrane-Based Photo-Bioelectrochemical Bioanode For Self-Powered Light-Driven Electronics, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox …

Structural Analysis Of Multi-Domain Dynamic Systems Modeled Via Bond Graphs, Arnold A. Fernandes, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

Structural Observability (SO) and Structural Monitorability (SM) are structural properties utilized to determine the state and fault-free operation of components, respectively, in a bond graph (BG) model. BGs enable qualitative system analysis, evaluating whether existing sets of sensors and actuators ensure Structural Observability (SO) and Structural Controllability (SC) without knowledge of parametric values. Furthermore, the analysis determines whether there are sufficient sensors available to identify component faults accurately. This work provides a framework for automated sensor placement in a multi-domain physical system while analyzing the SO and SM properties. The MATLAB Structural Analysis Toolbox (MATSAT) conducts sensor placement in a …

Active And Reactive Power Flow Control Of The Dual Active Bridge Converter, Lauryn Morris, Thomas W. Francois, Jonathan Saelens, Oroghene Oboreh-Snapps, Arnold Fernandes, Praneeth Uddarraju, Sophia A. Strathman, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

The Dual Active Bridge (DAB) is a reliable and efficient converter capable of providing bi-directional power transfer and galvanic isolation. An ac-ac DAB can control both active and reactive power flow. The present work introduces a combined feedback/feed-forward current control system, utilizing the calculated and measured converter currents translated into the dq reference frame, to control the output power. The system was simulated in PLECS to demonstrate the control algorithm's ability to track the dq currents and provide the necessary output power.

Computational Assessment Of Vitrimers Self-Healing For Renewable Energy And Aerospace Structures, Walaaeldin Mohamed Ahmed Derbala

Browse all Theses and Dissertations

Self-healing polymers, particularly vitrimers, are emerging as promising candidates in the development of advanced materials for renewable energy and aerospace structures. These materials exhibit dynamic covalent bond exchange mechanisms that enable reprocess ability, damage repair, and extended operational lifetime under harsh conditions. This study presents a density functional theory (DFT)-based computational investigation of the mechanistic pathways and energetics of bond exchange reactions in model vitrimer systems. We explore transition states, energy barriers, and thermodynamic features corresponding to associative and dissociative self-healing reactions in vitrimers. The study focuses on Diaminodiphenyl disulfide (AFD), a bifunctional molecule composed of two para-substituted aminophenyl rings …

Hydrogen Storage Density And Adsorption Energy Barriers On Li-Decorated Bc3 Nanosheet, Sri Venkat Pavan Upasi

Browse all Theses and Dissertations

Hydrogen is considered an emerging carrier of clean energy with renewable capabilities. Widespread hydrogen energy utilization necessitates efficient storage strategies. Functionalized nanomaterials, such as Li-decorated BC3 nanosheets, are among the primary candidate materials for hydrogen storage. This research investigates the feasibility of hydrogen storage by estimating energy barriers and their dependence on storage density on Li-decorated BC3 nanosheet. Density functional theory (DFT) simulations provide estimates of adsorption energies and saddle points for hydrogen storage and compare corresponding reaction rates. The results are expected to help us understand the advantages and possible shortcomings of hydrogen storage on such nanomaterials.

Fault Identification And Localization In Distribution Grids Based On An Attention-Hybrid Graph Neural Network, Xingjian Shan

Theses and Dissertations--Electrical and Computer Engineering

This thesis proposes a multi-task fault diagnosis framework for distribution systems based on Graph Convolutional Networks (GCN) and an enhanced Graph Attention Network (GATv2). By representing the power grid as a graph with electrical features and topological connections, the model simultaneously performs fault type classification and fault location prediction. The architecture incorporates residual connections, multi-head attention, and a Jumping Knowledge module to capture multi-scale structural patterns, while dynamic loss weighting ensures balanced task optimization under noise and sparsity. Experimental results on the IEEE 123-node test feeder demonstrate a fault classification accuracy of 96.43%, and fault localization accuracies of 84.64% (strict), …

Mathematical-Programming Modeling Of Power-Electronics-Based Microgrid Systems, Jack A. Robey

Theses and Dissertations--Electrical and Computer Engineering

The emergence of power-electronics-based microgrid systems is driven by the shift to cleaner energy, transportation electrification, renewable integration, grid modernization through smart grid advancements, and growing demand for energy-efficient solutions. For utilities, these systems present unique opportunities for enhancing grid resilience, improving load management, and enabling distributed energy resource integration. This work presents a modeling and simulation approach for microgrid systems that uses mathematical programming to represent power flow and capture the system dynamics. By solving an optimization problem at each time step, the method enables evaluation of power distribution and system performance under a range of operating conditions, without …

Lifecycle Carbon Footprint And Sustainability Evaluation Of Dram-Based Processing In Memory Computing Architectures, Samrat Pravin Patel

Theses and Dissertations--Electrical and Computer Engineering

The use of computing technologies has significantly enhanced several aspects of our day-to-day lives. But it has still revealed significant environmental concerns, primarily related to greenhouse gas emissions and energy consumption. Initially, the primary environmental problems associated with computing were energy consumption during device operation. However, with the rapid advancement of technology and increasing computational demands, attention has shifted towards the embodied carbon footprint. This term refers to the total greenhouse gas emissions throughout a product’s lifecycle from the extraction of raw materials to end-of-life processing. It has become increasingly significant in the context of manufacturing integrated circuits (ICs), such …

Scalable Systems And Devices For Wireless Charging Of Electric Vehicles, Donovin D. Lewis

Theses and Dissertations--Electrical and Computer Engineering

The rising adoption of electric vehicles creates new opportunities that are not possible with conventional gas-powered vehicles such as wireless charging of electric vehicles (EV). Wide-scale implementation of wireless charging could result in benefits unique to EVs such as operation without human intervention, improved charging accessibility, and even in-route wireless charging for charge-sustaining or extended driving range operation. As the technology is in the early stages of development, there are many open-ended challenges to tackle including but not limited to coil and systems cost, weight and size, stray field emissions in high-power, high-frequency operation, and dynamic wireless charging system design …

Analysis And Design Optimization Of Electric Machines With Field Intensifying Configuration, Ali Mohammadi

Theses and Dissertations--Electrical and Computer Engineering

The design and optimization of electric machines face increasing demands for efficiency, improved torque density, manufacturability, and effective utilization of materials. Meeting these demands is particularly vital in for example, electric vehicles (EVs) and renewable energy systems, where performance, reliability, and cost are critical. In this dissertation innovative field-intensifying electric machine configurations have been explored, emphasizing advanced topologies, computational modeling, and optimization techniques to advance the state of the art in electric machine design and analysis.

Electric machines with high torque density are essential for many low-speed direct-drive systems, such as wind turbines, in-wheel traction, and industrial automation. This dissertation …

Multi-Objective Design Optimization Of Power Converters For Electric Aircraft Propulsion, Ben Luckett

Theses and Dissertations--Electrical and Computer Engineering

As global focus shifts to the electrification of the aviation sector, the need for high efficiency, lightweight, and reliable electric aircraft propulsion power converter systems has become apparent. These goals can be somewhat conflicting with each other, and a single multi-domain-optimized solution is not guaranteed. The search for a design which presents satisfactory merits becomes a drudge through various trade-off studies which can expend vast quantities of manpower and time. As a remedy to this, design automation allows the process to be computer-assisted. This dissertation presents the core fundamentals for a general multi-objective design optimization framework intended for the design …

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael

Mathematics & Statistics Faculty Publications

The conjugate heat transfer and fluid flow has vast applications in thermal engineering, particularly for cooling in thermal devices, and automobile engines. This study investigates conjugate heat transfer in 2D enclosures, featuring thin solid fins attached to a porous bottom wall. The porous medium is considered isotropic and homogeneous by the Darcy-Forchheimer model, with fluid phases in local thermal equilibrium. The boundary conditions at the porous fluid interface ensure continuity of the velocities, stresses, temperature, and heat flux. The phenomenon is mathematically modelled by obtaining a set of partial differential equations. The finite element method (FEM) is used to perform …

Enhance The Design Of Low-Cost Fast Charging Battery Systems For Electric Mobility Systems, Omar Matar, Abdalrahman S. Alneklawy, Yara M. El-Hawary, Ahmed M. Elbeshbeshy, Ali Shoman, Ahmed R. Alagmy, Ahmed Mashaly, Arwa G. Saheen, Sahar S. Kaddah, Basem M. Badr

Mansoura Engineering Journal

The need of electric mobility (E-Mobility) systems increases daily, where the E-Mobility systems contribute in decreasing gas emissions from transportation Electric motorcycles (E-Motorcycles) are one of the E-Mobility systems, which reduce the problems resulting from traditional fossil fuel exhausts. This paper discusses the design and development of low-cost battery systems for E-Motorcycles, where a fast charging system is simulated, analyzed, and deployed to charge a battery package that outputs 72V & 8A at rated performance. Research and analysis of different power converter topologies are performed with respect the cost and system performance. A battery tester circuit is designed and built …

Renewable Energy Integration In Nyc Subway: Solar Panels (Under Railroads And At The Subway's Edge) & Vertical Axis Wind Turbines (Vawts) Near Tracks, Pengdwinde Olivier Saba

Dissertations and Theses

As urban populations continue to expand, the demands on public transit systems in densely populated regions like New York City are escalating. Multiple cities face the dual challenge of increasing ridership and the imperative to minimize their environmental footprints.According to Law 97 in NYC, the goal is to reduce emissions by 40% and to reach net zero by 2050. An innovative solution will need to be integrated into the NYC environment, such as the subway system, where there are a potential unuse space, building rooftop, since we know that spaces in New York City are very critical, such as these …

A Comprehensive Academic And Industrial Survey Of Blockchain Technology For The Energy Sector Using Fuzzy Einstein Decision-Making, Umit Cali, Annabelle Lee, Barry Hayes, Claudio Lima, D. Jonathan Sebastian-Cardenas, David Flynn, Emre Kantar, Farrokh Rahimi, Kaung Si Thu, Marco Pasetti, Marthe Fogstad Dynge, Merlinda Andoni, Muhammet Deveci, Murat Kuzlu, Raquel Alanso, Kim-Kwang Raymond Choo, Sambeet Mishra, Shammya Shananda Saha, Sonam Norbu, Srinikhil Gourisetti, Ugur Halden, Vahid Hosseinezhad, Valentin Robu

Engineering Technology Faculty Publications

The global energy sector is undergoing a significant transformation driven by decarbonization and digitalization, leading to the emergence of Distributed Ledger Technology (DLT) — particularly blockchain — as a promising tool for enhancing transparency, security, and efficiency in modern power systems. This study aims to provide a comprehensive academic and industrial survey of blockchain applications in the energy sector and develop a robust decision-making framework to identify and prioritize the most promising real-world use cases based on multidisciplinary criteria. A three-stage methodology was adopted: (i) a literature and market review encompassing over 300 academic publications and commercial blockchain initiatives in …

Advancing 4h-Silicon Carbide Power Mosfets Through Three-Dimensional Technology Computer Aided Design Optimization, Skylar A. Deboer

Electronic Theses & Dissertations (2024 - present)

This research contributes to the advancement of 1.2 kV 4H-Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) through the development and implementation of sophisticated three-dimensional Technology Computer-Aided Design (3D TCAD) methodologies. These advanced simulation techniques enable comprehensive evaluation of innovative unit cell architectures that remain inaccessible to conventional two-dimensional (2D) TCAD approaches. By leveraging these 3D simulation capabilities, this work facilitates significant improvements in both the performance and reliability of next-generation wide-bandgap power devices.

Power devices convert electrical energy between different forms throughout the power grid making them essential in applications ranging from personal electronics, electric vehicles, renewable energy systems, industrial …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Electrochemical biosensors have been instrumental in early disease detection, facilitating effective monitoring and treatment. The emergence of graphene has significantly advanced sensor technology in various fields, including biomedicine, electronics, and energy. In this landscape, laser‐induced graphene (LIG) has emerged as a superior alternative to conventional graphene synthesis methods. Its straightforward fabrication process and compatibility with wearable devices boost its practicality and potential for real‐world applications. This review highlights the transformative potential of LIG in biosensing, showcasing its contributions to the development of next‐generation diagnostic tools for early disease detection. An overview of the LIG synthesis process and its applications in …