Power and Energy Commons^™

Possibilities And Challenges Of Radio Frequency Energy Harvesting In Dar Es Salaam, Tanzania, Fredrick Isingo

Tanzania Journal of Engineering and Technology (TJET)

This paper presents investigation on the possibilities and challenges of harvesting ambient Radio Frequency Energy (RFE) at Dar es Salaam region in Tanzania. The Radio Frequency (RF) signals were measured using a Rohde and Schwarz FSC 3 spectrum analyzer observing available frequencies with their respective power. Among several RF signals received, the most powerful signals observed were; 800 MHz, 950 MHz, 2100 MHz and 2400 MHz, having average signal strengths of about-30.29 dBm,-35.94 dBm,-42.90 dBm and-30.42 dBm respectively. The power possessed within these frequencies were suitable to be harvested due to their signal strengths, an overall power average of-34.89dBm was …

User-Centred Scalable Big Data Visualizer For Power Consumption Data In The Electrical Secondary Distribution Network, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Establishment of Smart Grids for electrical power has been practised worldwide for the purpose of bringing reliability, security, and efficient management of electrical power networks for enhancing quality service to the society. Apart from the potential aim, smart grid has been a challenge to developing countries, including Tanzania from cost and technology point of view. Due to the use of many smart equipment involved in smart grids like Advanced Metering Infrastructure (AMI) equipped with smart meters and sensors, handling and managing big data has been a challenge. Among the challenges is the issue of visualizing the Big Data due to …

Deconvolution Of Mono-Energetic And Multi-Lines Gamma-Ray Spectra Obtained With Nai(Tl) Scintillation Detectors Using Direct Matrix Inversion Method, Mwingereza John Kumwenda Dr

Tanzania Journal of Engineering and Technology (TJET)

Performance of a NaI(Tl) scintillation detector based on the gamma-ray spectroscopy system is not satisfactory in retaining its original peak (which is delta like function) of various gamma ray spectrum. The method of achieving precise peak for the various gamma ray was conducted by converting the observed pulse-height distribution of the NaI(Tl) detector to a true photon spectrum. This method is obtained experimentally with the help of an inverse matrix deconvolution method. The method is based on response matrix generated by the Monte Carlo simulation based on Geant4 package of mono-energy gamma-ray photon ranging from 0.050 to 2.04 MeV in …

Assessment Of The Performance Of Grinding Circuit For Buzwagi Gold Mine, Alphonce Wikedzi

Tanzania Journal of Engineering and Technology (TJET)

It had been reported by the management of Buzwagi Gold Mine (BGM) that grinding circuit was designed to produce final product size of 125 μm, which had not been achieved for a long period of time under both, low to normal (i.e. 450-600 t/h) and high (i.e. > 650 t/h) throughputs. Also, the performance behaviour of the circuit had not been reviewed after long time of operation. Hence, an evaluation study was conducted in order to recommend improvement in mine operations. The study was realized through three circuit survey campaigns and laboratory experimentations. From the surveys, size distributions and solids contents …

Fermentability Of Concentrated Sulfuric Acid Hydrolyzates From Aspenwood And Pinewood, Kando Janga

Tanzania Journal of Engineering and Technology (TJET)

The fermentability of hydrolyzates derived from two-stage concentrated sulfuric acid hydrolysis of Trembling aspen (Populus tremula) and Scots pine (Pinus sylvestris) were investigated. Three types of hydrolyzates were produced at mild, moderate and high decrystallization severity conditions. Portions of each of the original hydrolyzates were concentrated by vacuum evaporation to increase the sugar fraction to simulate industrial applications. Both sets of hydrolyzates were fermented anaerobically using Saccharomyces cerevisiae ATCC 96581. After 23 hours of fermentation, complete glucose consumption was observed for all the original hydrolyzates, with no signs of inhibition. The ethanol yields from these hydrolyzates ranged from 68% to …

Analysis Of Performance Characteristics Predicted From Several Experimental Data And Conversion Methods For Pumps As Turbine Application Using Statistical Techniques, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

Different performance characteristics have been indicated when running centrifugal pumps in the reverse direction. The water flows from the discharge side of the pump to the suction side to run in the reverse direction and generate the mechanical rotational energy for the micro-hydropower plant. The current study evaluates the extent of variation of performance characteristics predicted by several experimental data from different pump-specific speeds and conversion methods. The performance characteristics discussed include the head, flow rate, efficiency and specific speed. The flow rate and head of a pump operating in pump mode divided with the characteristic of the pump operating …

Bibliometric Review Of Mppt Algorithms For Wind Energy Conversion Systems, Jayshree Ashok Pande, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

The existing conventional fuels are going up in prices and going down in availability. This has boosted the demand for renewable resources like wind energy. Wind energy being abundantly available is becoming very popular as it is a freely available pollution-free green energy. Some technical aspects like the tracking of maximum power from the wind energy conversion systems have a very high impact on the efficiency of the wind energy conversion systems. Several algorithms have been implemented for tracking the maximum power point of the wind energy conversion systems. The main objective of this paper is to study the extent …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 ^oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Degradation And Thermal Characteristics Of Lini0.8Co0.15Al0.05O2/Graphite Lithium Ion Battery After Different State Of Charge Ranges Cycling, Cun Wang, Wei-Jiang Zhang, Teng-Fei He, Bo Lei, You-Jie Shi, Yao-Dong Zheng, Wei-Lin Luo, Fang-Ming Jiang

Journal of Electrochemistry

The LiNi_0.8Co_0.15Al_0.05O₂ (NCA) cathode exhibits high energy density and large reversible capacity, which plays an essential role in the field of electric vehicles (EVs). However, low capacity retention and poor thermal stability limit its application. Few literatures are found for the capacity degradation mechanism of NCA/graphite batteries at home and abroad. The different state of charge (SOC) ranges cycle degradation behaviors of 18650-type NCA/graphite (2.4 Ah) battery were studied in this paper. The SOC ranges considered were 0% ~ 20% (low), 20% ~ 70% (medium), 70% ~ 100% (high), and 0% ~ 100% …

Preparations And Sodium Storage Properties Of Ni3S2@Cnt Composite, Ming-Tao Duan, Yan-Shuang Meng, Hong-Shuai Zhang

Journal of Electrochemistry

Transition metal sulfides (TMSs)-based electrode materials with highly reversible sodium storage have attracted extensive attentions as one of the most prospective electrode materials for sodium ion batteries (SIBs). However, low cycling stability and rate property caused by large volume expansion and poor electronic conductivity during the electrochemical reaction still hamper their further practical application. In this work, in-situ encapsulated Ni₃S₂ nanoparticles in carbon nanotubes (Ni₃S₂@CNT) have been successfully fabricated as an anode material for high-performance SIBs by a one-step solid-phase calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), …

Effect Of Stereotaxically-Constructed Graphene On The Negative Electrode Performance Of Lead-Acid Batteries, Pin-Song Chen, Yi-Tao Hu, Xin-Yi Zhang, Pei-Kang Shen

Journal of Electrochemistry

With the advantages of high ratio surface area, excellent conductivity and high stability, the stereotaxically-constructed graphene (SCG) material was added to the negative active material (NAM) of lead-acid battery for improving battery performance. XRD, SEM and cyclic voltammetry tests were carried out to analyze the influence of SCG on negative active material. It is found that the conversion efficiency of lead sulfate to lead in the negative active material added with SCG material was higher than that of control group, and the particle size of the lead sulfate obtained after the discharge reaction was smaller, which are favorable factors for …

Preparations And Photoelectrochemical Performances Of Rgo-Tio2 Nanotubes Arrays, Ze-Yang Zhang, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Decorating TiO₂ nanotube arrays with RGO to improve the photocatalytic activity of TiO₂ nanotube arrays has been reported. For the reported RGO-TiO₂ nanotube arrays, TiO₂ nanotube arrays were prepared by anodizing the high-purity Ti foil in an organic electrolyte for multiple-step treatments, while RGO were deposited on TiO₂ nanotube arrays by using cyclic voltammetry or other electrical reduction methods. To enhance the reduction degree and the coverage of RGO on the resultant RGO-TiO₂ nanotube arrays, in this work, the one-step electrochemical anodization in hydrofluoric acid was used to fabricate TiO₂ nanotube arrays with …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Preparation And Process Optimization Of Cathode Materials For Lithium-Sulfur Batteries, Kai Wu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries represent promising candidates for next-generation energy storage system due to their high energy density and low material cost. However, the industrial application of Li-S batteries remains challenges because of the shuttle effect from lithium polysulfides and the lack of facial routes for Li-S battery preparation. To solve these problems, a cathode consisting of different commercial carbon materials, namely, acetylene black (SP), Ketjen Black (KB) and carbon nanotube (CNT), with sulfur (S) is prepared separately for Li-S battery. After the process of 8-h ball milling for KB/S composite, together with the polyvinyl pyrrolidone (PVP) binder, the cathode could …

Step-By-Step Modification Of Graphite Felt Electrode For Vanadium Redox Flow Battery, Jing-Yuan Lou, Dong-Jiang You, Xue-Jing Li

Journal of Electrochemistry

As a well-known electrode material of the vanadium redox flow battery (VRFB),graphite felt electrode is the frequently-used electrode material in VRFB, and its low electrochemical activity is one of the key factors for the low power density of VRFB. In this work, we proposed a step-by-step modification method, which used KMnO₄ to oxidize graphite felt first and then placed in an activation solution to excite its reactivity, to improve the electrochemical performance of the graphite felt electrode. According to the results from cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) characterizations …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Improving The Maximum Power Point Tracking Efficiency Of Photovoltaic Arrays Via Machine Learning And Deep Learning, Sumedha Inamdar

Master of Science in Computer Science Theses

Under partial shading conditions, photovoltaic (PV) modules in a solar array experience varying irradiance. A Global Maximum (GM) and multiple Local Maximums (LMs) can originate on the Power-Voltage (P-V) curve under nonuniform irradiance conditions. There are many maximum power point tracking (MPPT) algorithms developed to detect the true maximum power point (MPP) of a PV array. However, in the real-world environment, limited samples of power-voltage (P-V) data might be available to quickly and accurately predict the position of the global maximum point. Since the change of environmental conditions are dynamic, limited time is available to locate the global peak. Machine …

Multigrid For The Nonlinear Power Flow Equations, Enrique Pereira Batista

Mathematics Theses and Dissertations

The continuously changing structure of power systems and the inclusion of renewable
energy sources are leading to changes in the dynamics of modern power grid,
which have brought renewed attention to the solution of the AC power flow equations.
In particular, development of fast and robust solvers for the power flow problem
continues to be actively investigated. A novel multigrid technique for coarse-graining
dynamic power grid models has been developed recently. This technique uses an
algebraic multigrid (AMG) coarsening strategy applied to the weighted
graph Laplacian that arises from the power network's topology for the construction
of coarse-grain approximations to …

Circuit Topology Estimation In An Adaptive Protection Platform, Daniel Ruiz

Electrical and Computer Engineering ETDs

Modern electric power systems, power system protections and controls have experienced a significant change, thanks to the introduction of new technologies, such as microprocessors, GPS, communication, etc. These technologies brought an increased amount of measured-data and information flow on power grids. Adaptive protection systems have been introduced to increase the reliability, selectivity, and sensitivity of the traditional protection systems. An adaptive protection system highly relies on the communication system infrastructure to identify the latest status of power grid (e.g., circuit topology or generation level of distributed energy resources). However, when the communication links to some of the equipment are outaged …

Puerto Rico’S Electric Power System: An Analysis Of Contemporary Failures And The Opportunity To Rebuild A More Resilient Grid, Including The Development Of A Utility-Scale Solar Farm On The Island Municipality Of Culebra, Federico Sotomayor

Sustainability and Social Justice

Puerto Rico’s grid was decimated in 2017 after experiencing back-to-back hurricanes – Maria and Irma. Although the hurricanes caused tremendous damage and hardship to the island, it also created the right circumstances for the local energy landscape to transition toward a more resilient and sustainable model. Through an analysis of recent challenges by the local electric utility PREPA, and subsequent fallout from the hurricanes, we see that they now hold a unique opportunity to redeem themselves by taking advantage of catalyzed resources to rebuild a better system. One region that could greatly benefit from an improved and reimagined grid are …

Field Testing The Effects Of Low Reynolds Number On The Power Performance Of The Cal Poly Wind Power Research Center Small Wind Turbine, John B. Cunningham

Master's Theses

This thesis report investigates the effects of low Reynolds number on the power performance of a 3.74 m diameter horizontal axis wind turbine. The small wind turbine was field tested at the Cal Poly Wind Power Research Center to acquire its coefficient of performance, C­_p, vs. tip speed ratio, λ, characteristics. A description of both the wind turbine and test setup are provided. Data filtration and processing techniques were developed to ensure a valid method to analyze and characterize wind power measurements taken in a highly variable environment. The test results demonstrated a significant drop in the …

Dc-Dc Buck-Boost Converter Design For Energy Harvesting From Exercise Equipment, Nicholas Serres

Electrical Engineering

This project aims to improve energy harvesting efficiency from an exercise machine. Exercise machine energy harvesting has a small immediate impact but can eventually have an immense impact. An elliptical exercise machine energy converter outputs 5V-60V whereas the microinverters require approximately 36V. The buck boost DC-DC converter bridges the gap between the microinverter and the elliptical machine. Increasing the buck-boost controller efficiency increases power production. Greater power efficiency gives the whole system more financial viability, and additionally makes it a greater sustainable energy source.

Developing A Medium-Voltage Three-Phase Current Compensator Using Modular Switching Positions, Vinson Jones

Graduate Theses and Dissertations

The objective of this thesis is to present the context, application, theory, design, construction, and testing of a proposed solution to unbalanced current loading on three-phase four-wire systems. This solution, known as the Medium-Voltage Unbalanced Current Static Compensator or MV-UCSC, is designed to recirculate currents between the three phases of adistribution system. Through this redistribution of the currents negative- and zero-sequence current components are eliminated and a balanced load is seen upstream from the point of installation. The MV-UCSC as it operates in the distribution system is presented followed by its effect on traditional compensation equipment. The construction of the …

Dc House Network Design And Modeling, Timmy Huu Nguyen, Joseph Shafie

Electrical Engineering

Although electricity is a necessity for nearly everything in daily life, many developing countries are unable to provide easy access to this utility. Often times within these developing countries, many renewable energy sources exist that are readily accessible to these same people that don’t have access to electricity within their homes, such as solar energy. However, the nature of renewable energy is that most renewable energy lacks consistency in power delivery throughout the day. An example of this is that solar energy isn’t available during the night. These small communities are often comprised of people that are familiar with each …

Design Of A 350 Kw Silicon Carbide Based 3-Phase Inverter With Ultra-Low Parasitic Inductance, Matthew Feurtado

Graduate Theses and Dissertations

The objective of this thesis is to present a design for a low parasitic inductance, high power density 3-phase inverter using silicon-carbide power modules for traction application in the electric vehicles with a power rating of 350 kW. With the market share of electric vehicles continuing to grow, there is a great opportunity for wide bandgap semiconductors such as silicon carbide (SiC) to improve the efficiency and size of the motor drives in these applications. In order to accomplish this goal, careful design and selection of each component in the system for optimum performance from an electrical, mechanical, and thermal …

Growth And Characterization Of Semiconductor Materials And Devices For Extreme Environments Applications, Abbas Sabbar

Graduate Theses and Dissertations

Numerous industries require electronics to operate reliably in harsh environments, such as extreme high temperatures (HTs), low temperature (LT), radiation rich environments, multi-extreme, etc. This dissertation is focused on two harsh environments: HT and multi-extreme.

The first study is on HT optoelectronics for future high-density power module applications. In the power modules design, galvanic isolation is required to pass through the gate control signal, reject the transient noise, and break the ground loops. The optocoupler, which consists of a lighting emitting diode (LED) and photodetector (PD), is commonly used as the solution of galvanic isolation at room temperatures. There is …

A Resilience Metric For Modern Power Distribution Systems, Tyler Bennett Phillips

Boise State University Theses and Dissertations

Modern society has become increasingly reliant on the functioning of critical infrastructure. It is considered so vital that its incapacitation or destruction would have debilitating effects on the global economy, national security, and public health and safety. The electrical power system is uniquely positioned, as it is essential for all other sectors of critical infrastructure to operate as intended. However, it is constantly at risk due to factors such as natural disasters, climate change, aging infrastructure, and cyber threats. Thus, ensuring the efficient and continuous supply of electricity is of utmost importance and the topic of this dissertation.

The work …

Smart Solar Charge Controller, Aria Pegah, Miclaine Emtman

Electrical Engineering

The technology of photovoltaics has been quickly evolving as we move toward a future with more clean energy. Energy conversion efficiency is key to making these systems the viable option amongst other sources of power. This project proposes a way to increase the power yield from a solar system by implementing smarter algorithms in the maximum power point tracking (MPPT) component of the system. MPPT is critical because environmental conditions may vary significantly for any given system due to irradiance and shading. The proposed method for MPPT utilizes a controller that uses swarm intelligence to do the power tracking.. This …

Design And Evaluation Of High Power, High Efficiency And High Power Density Motor Drives For More Electric Aircrafts, Zhao Yuan

Graduate Theses and Dissertations

More-electric aircraft (MEA) is an attractive concept as it can reduce carbon dioxide emission, relieve fossil-fuel consumption, improve the overall efficiency of aircraft, and reduce the operational costs. However, it poses substantial challenges in designing a high-performance motor drive system for such applications. In the report of Aircraft Technology Roadmap to 2050, the propulsion converter is required to be ultra-high efficiency, high power density, and high reliability. Though the wide band-gap devices, such as the Silicon-carbide based Metal Oxide Silicon Field Effect (SiC-MOSFET), shows better switching performance and improved high-temperature performance compared to the silicon counterparts, applying it to the …