Open Access. Powered by Scholars. Published by Universities.®

Power and Energy Commons™

Open Access. Powered by Scholars. Published by Universities.®

Old Dominion University

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 1 - 30 of 147

Full-Text Articles in Power and Energy

Ammonia Synthesis By Nanosecond Pulsed Atmospheric Pressure Plasma Jets Impinging On Water, Zach Caudell, Lynnet Rich, Olga Pakhomova, Chunqi Jiang Jan 2026

Ammonia Synthesis By Nanosecond Pulsed Atmospheric Pressure Plasma Jets Impinging On Water, Zach Caudell, Lynnet Rich, Olga Pakhomova, Chunqi Jiang

Bioelectrics Publications

Developing energy-efficient technologies for carbon-neutral ammonia (NH₃) synthesis is critical for decentralized fertilizer production and global decarbonization. This study investigates generating NH₃ from water using a nanosecond pulsed atmospheric pressure plasma jet (ns‑APPJ) operating in either N₂ or dry air. The plasma jet reactor employed approximately 250 ns, up-to-22 kV pulses at 500 Hz to sustain a nonequilibrium discharge impinging directly on static liquid water. The kinetics, energy efficiency, and product selectivity of NH3 formation were quantified as functions of the pulse voltage, repetition frequency (PRF), and gas flow rate. NH₃ production increased linearly with treatment time and scaled strongly …

Go to article

Cybersecurity Center For Offshore Wind Energy (Final Project Round), Sachin Shetty Jan 2026

Cybersecurity Center For Offshore Wind Energy (Final Project Round), Sachin Shetty

Center for Secure and Intelligent Critical Systems (CSICS) Publications

This project establishes a Cybersecurity Center for Offshore Wind Energy with the objective of designing and operating a cyber-physical testbed for wind energy farms (WEFs) that enables comprehensive cybersecurity research. The testbed incorporates a Supervisory Control and Data Acquisition (SCADA) system connected to turbine models via industrial-grade programmable logic controllers (PLCs) and remote terminal units (RTUs). It supports side-channel data acquisition, implementation and analysis of various cyberattack scenarios, and development of attack detection, mitigation, and best-practice guidance tailored to wind energy systems. During the project, the team expanded the number and fidelity of mathematical turbine models (MTMs), integrated these models …

Go to article

Agricultural Productivity Under Energy Development: Insights From California, Wai Yan Siu, Sherzod B. Akhundjanov Jan 2026

Agricultural Productivity Under Energy Development: Insights From California, Wai Yan Siu, Sherzod B. Akhundjanov

ODU Articles

This paper examines how agricultural productivity patterns in Kern County, California, a leading region for both agricultural production and oil and gas development, co-vary with the spatial and temporal expansion of hydraulic fracturing and associated energy infrastructure. Using parcel- and county-level analyses, we characterize how agricultural productivity differs across proximity to energy development and across spatial scales. The results reveal spatially heterogeneous and scale-dependent patterns: parcel-level evidence indicates lower Enhanced Vegetation Index-based vegetation productivity within the 20-mile proximity zone around fracking wells, while county-level results show heterogeneous crop-specific yield changes during the post-expansion period. Together, these findings highlight the importance …

Go to article

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu Jan 2026

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of MF=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

Go to article

Co-Sputtered Cuni Heteroatomic Electrocatalyst For Enhanced 5-Hydroxymethylfurfural Selective Electrochemical Conversion, Moumita Dikshit, Baleeswaraiah Muchharla, Luz Vazquez Rivera, Kapil Kumar, Sunita Sanwaria, Kishor Kumar Sadasivuni, Abdennaceur Karoui, Sandeep Kumar, Adetayo Adedeji, Bijandra Kumar Jan 2026

Co-Sputtered Cuni Heteroatomic Electrocatalyst For Enhanced 5-Hydroxymethylfurfural Selective Electrochemical Conversion, Moumita Dikshit, Baleeswaraiah Muchharla, Luz Vazquez Rivera, Kapil Kumar, Sunita Sanwaria, Kishor Kumar Sadasivuni, Abdennaceur Karoui, Sandeep Kumar, Adetayo Adedeji, Bijandra Kumar

Civil & Environmental Engineering Faculty Publications

The electrochemical conversion of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising, economically viable, and environmentally sustainable approach for producing value-added chemicals using renewable energy and in situ hydrogen generated through water electrolysis. However, the electrochemical hydrogenation (ECH) of HMF remains challenging due to the inherently low catalytic activity and selectivity of the electrodes, compounded by competition with the kinetically favored hydrogen evolution reaction (HER) in aqueous electrolytes. In this work, we demonstrate that CuxNi100-x heteroatomic thin films, fabricated via direct current (DC) magnetron co-sputtering, achieve a more than one order of magnitude increase in the HMF to 2,5-Bis-hydroxymethylfuran …

Go to article

Element-Based Predictive Modeling Of Hydrothermal Liquefaction Bioproducts Derived From Corn Stover, Isamu Umeda, Meicen Liu, Yi Zheng, Jiefu Wang, Zhiwu Wang, Sandeep Kumar Jan 2026

Element-Based Predictive Modeling Of Hydrothermal Liquefaction Bioproducts Derived From Corn Stover, Isamu Umeda, Meicen Liu, Yi Zheng, Jiefu Wang, Zhiwu Wang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

The hydrothermal liquefaction (HTL) process offers an energetic advantage over pyrolysis because it does not require prior drying of the biomass feedstock. However, there are significant challenges in simultaneously estimating both the yields and characteristics of products from the HTL of biomass with theoretical support. This study developed a unique element-based kinetic model to predict the yields, higher heating values, and fuel characteristics of solid residue and heavy bio-oil, based on the temperature, residence time, solid loading, and elemental composition (C, H, N, and O) of corn stover. Furthermore, the model predicted the weights of dissolved carbon and nitrogen in …

Go to article

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut Jan 2026

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Go to article

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn Jan 2026

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn

Engineering Technology Faculty Publications

The global energy transition toward decarbonization and digitalization requires advanced methods to manage decentralized, data-intensive cyber-physical energy systems. This systematic review analyzes 106 research studies on Generative Artificial Intelligence (GenAI) and Large Language Models (LLMs) in renewable energy and smart grids, organized into seven application clusters covering forecasting, system design, operation, reliability, data and cybersecurity, and energy markets. The review situates these applications within a Cyber-Physical-Social Systems (CPSS) framework. Results show that GANs dominate current applications (47.2%), followed by LLMs (10.4%) and VAEs (9.4%), with growing adoption of diffusion and score-based models (7.5% each). Selected studies report improved probabilistic forecasting …

Go to article

Qubit Lattice Algorithm Simulations Of The Scattering Of A Bounded Two Dimensional Electromagnetic Pulse From The Infinite Planar Dielectric Interface, Min Soe, George Vahala, Linda Vahala, Efstratios Koukoutsis, Abhay K. Ram, Kyriakos Hizanidis Jan 2026

Qubit Lattice Algorithm Simulations Of The Scattering Of A Bounded Two Dimensional Electromagnetic Pulse From The Infinite Planar Dielectric Interface, Min Soe, George Vahala, Linda Vahala, Efstratios Koukoutsis, Abhay K. Ram, Kyriakos Hizanidis

Electrical & Computer Engineering Faculty Publications

Qubit lattice algorithm (QLA) simulations are performed for a two-dimensional spatially bounded pulse propagating onto a plane interface between two dielectric slabs. QLA is an initial value scheme that consists of a sequence of unitary collision and streaming operators, with appropriate potential operators, that recover Maxwell equations in inhomogeneous dielectric media to the second order in the lattice discreteness. For the case of total internal reflection, there is transient energy transfer into the second medium due to the evanescent fields as the Poynting unit vector of the pulse is rotated from its incident to reflected direction. Because of the finite …

Go to article

Analytical And Semi-Analytical Modeling Of Solar Cells Using The Lambert W Function: A Comprehensive Review Of Equivalent Circuits, Adel El-Shahat, Martin Ćalasan, Snežana Vujoševic, Shady H. E. Abdel Aleem Jan 2026

Analytical And Semi-Analytical Modeling Of Solar Cells Using The Lambert W Function: A Comprehensive Review Of Equivalent Circuits, Adel El-Shahat, Martin Ćalasan, Snežana Vujoševic, Shady H. E. Abdel Aleem

Engineering Technology Faculty Publications

The modeling of photovoltaic (PV) cells through equivalent circuits forms a central element in the analysis, simulation, and optimization of solar energy systems. Traditional approaches often depend on iterative numerical methods to solve the implicit current–voltage (I–V) equations. In contrast, the Lambert W function has emerged as an effective mathematical tool that enables closed-form or semi-analytical expressions for a wide range of PV models. This paper presents a Lambert W-centered review of analytical and semi-analytical formulations for PV equivalent-circuit models, covering classical single-diode and multi-diode structures and modern variants incorporating additional elements, voltage-dependent parameters, and topology rearrangements. The models are …

Go to article

Comparative Assessment Of Energy And Emission Costs For Geothermal Heat Pumps And Fossil-Fuel Heating Systems Across U.S. Climatic Zones, Md Shahin Alam, Shima Afshar, Seyed Ali Arefifar, Mohammad Haq Jan 2026

Comparative Assessment Of Energy And Emission Costs For Geothermal Heat Pumps And Fossil-Fuel Heating Systems Across U.S. Climatic Zones, Md Shahin Alam, Shima Afshar, Seyed Ali Arefifar, Mohammad Haq

Electrical & Computer Engineering Faculty Publications

In response to growing concerns over global warming and energy sustainability, transitioning from fossil-fuel-based heating systems to renewable alternatives is essential. This study evaluates the economic and environmental performance of geothermal heat pumps for building heating and compares it with conventional coal-fired boilers, natural-gas boilers, and diesel furnaces. Using the heating degree-day (HDD) method, heating energy demand was analyzed for four U.S. cities—Anchorage (AK), San Francisco (CA), Salt Lake City (UT), and Las Vegas (NV)—representing diverse climatic zones. The analysis integrates thermodynamic and economic parameters, including the coefficient of performance (COP = 2–5) and annual fuel-utilization efficiency (AFUE = 80–97%), …

Go to article

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard Jan 2026

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Go to article

Towards Supporting Real-Time Estimation Of Vehicle Fuel Consumption And Co2 Emissions In Smart City Applications, Abrar Alali, Stephan Olariu Jan 2026

Towards Supporting Real-Time Estimation Of Vehicle Fuel Consumption And Co2 Emissions In Smart City Applications, Abrar Alali, Stephan Olariu

Computer Science Faculty Publications

This paper evaluates a simplified physics-based energy demand model designed to estimate vehicle fuel consumption and CO₂ emissions—a critical tool for sustainable transportation planning and smart city applications. Unlike data-driven regression models that lack generalizability for user-defined conditions or complex physics-based approaches that rely on extensive, often proprietary data, the simplified model is distinguished by its minimal parameter requirements, depending primarily on a single, overarching powertrain efficiency value. A key contribution is the comprehensive empirical evaluation of the simplified model against official Environmental Protection Agency (EPA) test data across multiple driving cycles and vehicle types, providing a rigorous validation previously …

Go to article

Development Of Laser-Induced Graphene-Based Bioanode Incorporating Thylakoid For Harvesting Energy, Amit Sarode Apr 2025

Development Of Laser-Induced Graphene-Based Bioanode Incorporating Thylakoid For Harvesting Energy, Amit Sarode

Biomedical Engineering Theses & Dissertations

Thylakoid-Based Biofuel Cells (TBFCs) present significant potential as renewable power sources; however, their development is impeded by challenges including delicate thylakoid membranes, limited electron transport efficiency, stability and dependence on expensive mediators. This study aimed to address these challenges by fabricating a novel photo-driven bioanode through the integration of Laser-Induced Graphene (LIG), Nb4C3Tx MXene, and thylakoid membranes. The fabrication process involved laser engraving to generate porous LIG electrodes, followed by MXene drop casting and thylakoid immobilization to enhance electrochemical performance and surface area. Morphological characterization supported that MXene incorporation increased active sites and surface roughness, …

Go to article

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang Jan 2025

Determining The Transient Electric Field And The Effect Of Pulse Repetition Frequency On The Field In A Repetitive 10-Ns Pulsed Discharge In A Quiescent Ch₄-Air Mixture, Chunqi Jiang

Bioelectrics Publications

The goal of this research is to understand the underlying physics enabled by nanosecond pulsed power in a discharge initiation and the following physicochemical processes that favor lean-fuel plasma ignition for combustion. The hypothesis of this project is that pulsed power waveforms such as the pulse repetition frequency (PRF), voltage amplitude, and dielectric surface alter the reduced electric field during the initiation of the discharge, resulting in different plasma properties, which will vary the physicochemical processes for efficient and selective radical productions. This is especially important for lean-burn combustion and reducing emission.

Go to article

Optimizing Material Selection And Operational Conditions For Xhv Systems: Lessons From Aisi 1020 And 316l Comparative Studies, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa Jan 2025

Optimizing Material Selection And Operational Conditions For Xhv Systems: Lessons From Aisi 1020 And 316l Comparative Studies, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

In this study, AISI 1020 low-carbon steel was investigated as a cost-effective alternative to SS316L stainless steel for reaching extreme high vacuum (XHV) conditions. After being baked at 400°C, a vacuum chamber made of low-carbon steel material exhibited an outgassing rate approximately 2000 times smaller than a similar chamber made of stainless steel. Its activation energy for hydrogen diffusion (27 kJ/mol) is less than half that of stainless steel (60.3 kJ/mol), indicating more efficient hydrogen removal during bakeout. MolFlow+ simulations supported the experimental data and demonstrated the importance of system geometry optimization and minimizing stainless steel content for achieving optimal …

Go to article

A Comprehensive Review Of Piezoelectric Pvdf Polymer Fabrications And Characteristics, Nadia Ahbab, Sidra Naz, Tian-Bing Xu, Shihai Zhang Jan 2025

A Comprehensive Review Of Piezoelectric Pvdf Polymer Fabrications And Characteristics, Nadia Ahbab, Sidra Naz, Tian-Bing Xu, Shihai Zhang

Mechanical & Aerospace Engineering Faculty Publications

Polyvinylidene fluoride (PVDF) polymer films, renowned for their exceptional piezoelectric, pyroelectric, and ferroelectric properties, offer a versatile platform for the development of cutting-edge micro-scale functional devices, enabling innovative applications ranging from energy harvesting and sensing to medical diagnostics and actuation. This paper presents an in-depth review of the material properties, fabrication methodologies, and characterization of PVDF films. Initially, a comprehensive description of the physical, mechanical, chemical, thermal, electrical, and electromechanical properties is provided. The unique combination of piezoelectric, pyroelectric, and ferroelectric properties, coupled with its excellent chemical resistance and mechanical strength, makes PVDF a highly valuable material for a wide …

Go to article

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter Jan 2025

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual …

Go to article

Age Of Information-Based Optimal Scheduling With Energy Cost Trade-Off For Smart Warehouse: A Deep Reinforcement Learning-Based Approach, Sandip Roy, Abhishek Bisht, Ashok Kumar Das, Sachin Shetty Jan 2025

Age Of Information-Based Optimal Scheduling With Energy Cost Trade-Off For Smart Warehouse: A Deep Reinforcement Learning-Based Approach, Sandip Roy, Abhishek Bisht, Ashok Kumar Das, Sachin Shetty

VMASC Publications

Recent advances in the integration of high-speed mobile networks and real-time IoT devices have facilitated in building of smart warehouses, where a set of beacons and Internet of Things (IoT) devices (or source nodes) can monitor the status of various physical processes in a time-critical way. In real-time status monitoring systems, like smart warehouses, quantifying the freshness of the Internet of Things (IoT) data based on the age of information (AoI) metrics becomes quite crucial. As source nodes are battery-constrained, a balanced trade-off between AoI minimization and preservation of source node battery energy is essential. In this paper, in a …

Go to article

A Comparative Analysis Of Preprocessing Filters For Deep Learning-Based Equipment Power Efficiency Classification And Prediction Models, Sang-Ha Sung, Chang-Sung Seo, Michael Pokojovy, Sangjin Kim Jan 2025

A Comparative Analysis Of Preprocessing Filters For Deep Learning-Based Equipment Power Efficiency Classification And Prediction Models, Sang-Ha Sung, Chang-Sung Seo, Michael Pokojovy, Sangjin Kim

Mathematics & Statistics Faculty Publications

The quality of input data is critical to the performance of time-series classification models, particularly in the domain for industrial sensor data where noise and anomalies are frequent. This study investigates how various filtering-based preprocessing techniques impact the accuracy and robustness of a Transformer model that predicts power efficiency states (Normal, Caution, Warning) from minute-level IIoT sensor data. We evaluated five techniques: a baseline, Simple Moving Average, Median filter, Hampel filter, and Kalman filter. For each technique, we conducted systematic experiments across time windows (360 and 720 min) that reflect real-world industrial inspection cycles, along with five prediction offsets (up …

Go to article

Fabrication Of Thylakoid Membrane-Based Photo-Bioelectrochemical Bioanode For Self-Powered Light-Driven Electronics, Amit Sarode, Gymama Slaughter Jan 2025

Fabrication Of Thylakoid Membrane-Based Photo-Bioelectrochemical Bioanode For Self-Powered Light-Driven Electronics, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox …

Go to article

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael Jan 2025

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael

Mathematics & Statistics Faculty Publications

The conjugate heat transfer and fluid flow has vast applications in thermal engineering, particularly for cooling in thermal devices, and automobile engines. This study investigates conjugate heat transfer in 2D enclosures, featuring thin solid fins attached to a porous bottom wall. The porous medium is considered isotropic and homogeneous by the Darcy-Forchheimer model, with fluid phases in local thermal equilibrium. The boundary conditions at the porous fluid interface ensure continuity of the velocities, stresses, temperature, and heat flux. The phenomenon is mathematically modelled by obtaining a set of partial differential equations. The finite element method (FEM) is used to perform …

Go to article

A Comprehensive Academic And Industrial Survey Of Blockchain Technology For The Energy Sector Using Fuzzy Einstein Decision-Making, Umit Cali, Annabelle Lee, Barry Hayes, Claudio Lima, D. Jonathan Sebastian-Cardenas, David Flynn, Emre Kantar, Farrokh Rahimi, Kaung Si Thu, Marco Pasetti, Marthe Fogstad Dynge, Merlinda Andoni, Muhammet Deveci, Murat Kuzlu, Raquel Alanso, Kim-Kwang Raymond Choo, Sambeet Mishra, Shammya Shananda Saha, Sonam Norbu, Srinikhil Gourisetti, Ugur Halden, Vahid Hosseinezhad, Valentin Robu Jan 2025

A Comprehensive Academic And Industrial Survey Of Blockchain Technology For The Energy Sector Using Fuzzy Einstein Decision-Making, Umit Cali, Annabelle Lee, Barry Hayes, Claudio Lima, D. Jonathan Sebastian-Cardenas, David Flynn, Emre Kantar, Farrokh Rahimi, Kaung Si Thu, Marco Pasetti, Marthe Fogstad Dynge, Merlinda Andoni, Muhammet Deveci, Murat Kuzlu, Raquel Alanso, Kim-Kwang Raymond Choo, Sambeet Mishra, Shammya Shananda Saha, Sonam Norbu, Srinikhil Gourisetti, Ugur Halden, Vahid Hosseinezhad, Valentin Robu

Engineering Technology Faculty Publications

The global energy sector is undergoing a significant transformation driven by decarbonization and digitalization, leading to the emergence of Distributed Ledger Technology (DLT) — particularly blockchain — as a promising tool for enhancing transparency, security, and efficiency in modern power systems. This study aims to provide a comprehensive academic and industrial survey of blockchain applications in the energy sector and develop a robust decision-making framework to identify and prioritize the most promising real-world use cases based on multidisciplinary criteria. A three-stage methodology was adopted: (i) a literature and market review encompassing over 300 academic publications and commercial blockchain initiatives in …

Go to article

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter Jan 2025

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Electrochemical biosensors have been instrumental in early disease detection, facilitating effective monitoring and treatment. The emergence of graphene has significantly advanced sensor technology in various fields, including biomedicine, electronics, and energy. In this landscape, laser‐induced graphene (LIG) has emerged as a superior alternative to conventional graphene synthesis methods. Its straightforward fabrication process and compatibility with wearable devices boost its practicality and potential for real‐world applications. This review highlights the transformative potential of LIG in biosensing, showcasing its contributions to the development of next‐generation diagnostic tools for early disease detection. An overview of the LIG synthesis process and its applications in …

Go to article

Streamer Discharge Modeling For Plasma-Assisted Combustion, Stuart Reyes, Shirshak Kumar Dhali Jan 2025

Streamer Discharge Modeling For Plasma-Assisted Combustion, Stuart Reyes, Shirshak Kumar Dhali

Electrical & Computer Engineering Faculty Publications

Some of the popular and successful atmospheric pressure fuel/air plasma-assisted combustion methods use repetitive ns pulsed discharges and dielectric-barrier discharges. The transient phase in such discharges is dominated by transport under strong space charge from ionization fronts, which is best characterized by the streamer model. The role of the nonthermal plasma in such discharges is to produce radicals, which accelerates the chemical conversion reaction leading to temperature rise and ignition. Therefore, the characterization of the streamer and its energy partitioning is essential to develop a predictive model. We examine the important characteristics of streamers that influence combustion and develop some …

Go to article

High-Fidelity Soh Prediction In Lithium-Ion Batteries Using Hybrid Ml Networks, Shafiyee Islam, Gon Namkoong Jan 2025

High-Fidelity Soh Prediction In Lithium-Ion Batteries Using Hybrid Ml Networks, Shafiyee Islam, Gon Namkoong

Electrical & Computer Engineering Faculty Publications

Accurate and efficient prediction of lithium-ion battery state of health (SOH) is critical for ensuring reliability in electric vehicles, grid storage, and aerospace systems. Traditional SOH estimation methods often struggle with nonlinear degradation behaviors and lack sensitivity to subtle electrochemical signals, limiting their real-world deployment. To address these challenges, this study examines hybrid deep learning models that integrate differential capacity (dQ/dV) analysis to enhance predictive accuracy. Four hybrid architectures - hybrid CNN-LSTM multihead, CNN extractor for LSTM, DNN-LSTM, and DNN Bi-LSTM - were developed and evaluated using the NASA randomized battery usage dataset, offering a realistic benchmark under diverse operational …

Go to article

A Proximal Policy Optimization-Based Controller For Enhanced Power Sharing In Microgrids, Seyedmohammad Hasheminasab, Armin Lotfy, Mohamad Alzayed, Hicham Chaoui Jan 2025

A Proximal Policy Optimization-Based Controller For Enhanced Power Sharing In Microgrids, Seyedmohammad Hasheminasab, Armin Lotfy, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

This paper introduces a Proximal Policy Optimization (PPO)-based virtual impedance (VI) controller to enhance both power sharing and system response under disturbances in inverter-interfaced microgrids. Traditional droop control methods often face challenges due to variations in feeder impedance, which degrade performance. The proposed controller continuously updates its policy based on changes in the operating environment. The control problem is modeled as a Markov Decision Process (MDP), in which the state and action spaces are explicitly defined, and a carefully designed reward function, satisfying system criteria and constraints, guides the learning process toward achieving the desired transient and steady-state performance. By …

Go to article

Energy-Aware Swarm Robotics In Smart Microgrids Using Quantum-Inspired Reinforcement Learning, Mohamed Shili, Salah Hammedi, Hicham Chaoui, Khaled Nouri Jan 2025

Energy-Aware Swarm Robotics In Smart Microgrids Using Quantum-Inspired Reinforcement Learning, Mohamed Shili, Salah Hammedi, Hicham Chaoui, Khaled Nouri

Electrical & Computer Engineering Faculty Publications

The integration of autonomous robots with intelligent electrical systems introduces complex energy management challenges, particularly as microgrids increasingly incorporate renewable energy sources and storage devices in widely distributed environments. This study proposes a quantum-inspired multi-agent reinforcement learning (QI-MARL) framework for energy-aware swarm coordination in smart microgrids. Each robot functions as an intelligent agent capable of performing multiple tasks within dynamic domestic and industrial environments while optimizing energy utilization. The quantum-inspired mechanism enhances adaptability by enabling probabilistic decision-making, allowing both robots and microgrid nodes to self-organize based on task demands, battery states, and real-time energy availability. Comparative experiments across 1500 grid-based …

Go to article

Energy-Aware Sensor Fusion Architecture For Autonomous Channel Robot Navigation In Constrained Environments, Mohamed Shili, Hicham Chaoui, Khaled Nouri Jan 2025

Energy-Aware Sensor Fusion Architecture For Autonomous Channel Robot Navigation In Constrained Environments, Mohamed Shili, Hicham Chaoui, Khaled Nouri

Electrical & Computer Engineering Faculty Publications

Navigating autonomous robots in confined channels is inherently challenging due to limited space, dynamic obstacles, and energy constraints. Existing sensor fusion strategies often consume excessive power because all sensors remain active regardless of environmental conditions. This paper presents an energy-aware adaptive sensor fusion framework for channel robots that deploys RGB cameras, laser range finders, and IMU sensors according to environmental complexity. Sensor data are fused using an adaptive Extended Kalman Filter (EKF), which selectively integrates multi-sensor information to maintain high navigation accuracy while minimizing energy consumption. An energy management module dynamically adjusts sensor activation and computational load, enabling significant reductions …

Go to article

Advances In Battery Modeling And Management Systems: A Comprehensive Review Of Techniques, Challenges, And Future Perspectives, Seyed Saeed Madani, Yasmin Shabeer, Ananthu Shibu Nair, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, Shi Xue Dou, Khay See, Saad Mekhilef, Françios Allard Jan 2025

Advances In Battery Modeling And Management Systems: A Comprehensive Review Of Techniques, Challenges, And Future Perspectives, Seyed Saeed Madani, Yasmin Shabeer, Ananthu Shibu Nair, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, Shi Xue Dou, Khay See, Saad Mekhilef, Françios Allard

Electrical & Computer Engineering Faculty Publications

Energy storage systems (ESSs) and electric vehicle (EV) batteries depend on battery management systems (BMSs) for their longevity, safety, and effectiveness. Battery modeling is crucial to the operation of BMSs, as it enhances temperature control, fault detection, and state estimation, thereby maximizing efficiency and preventing malfunctions. This paper thoroughly examines the most recent advancements in battery and BMS modeling, including data-driven, thermal, and electrochemical methods. Advanced modeling approaches are explored, including physics-based models that incorporate mechanical stress and aging effects, as well as artificial intelligence (AI)-driven state estimation. New technologies that facilitate data-driven decision-making, real-time monitoring, and simplified systems include …

Go to article

Next Last