Power and Energy Commons^™

Predictive Control Of Power Grid-Connected Energy Systems Based On Energy And Exergy Metrics, Meysam Razmara

Dissertations, Master's Theses and Master's Reports

Building and transportation sectors account for 41% and 27% of total energy consumption in the US, respectively. Designing smart controllers for Heating, Ventilation and Air-Conditioning (HVAC) systems and Internal Combustion Engines (ICEs) can play a key role in reducing energy consumption. Exergy or availability is based on the First and Second Laws of Thermodynamics and is a more precise metric to evaluate energy systems including HVAC and ICE systems. This dissertation centers on development of exergy models and design of model-based controllers based on exergy and energy metrics for grid-connected energy systems including HVAC and ICEs.

In this PhD dissertation, …

System Frequency Support Of Permanent Magnet Synchronous Generator-Based Wind Power Plant, Ziping Wu

Electronic Theses and Dissertations

With ever-increasing penetration of wind power into modern electric grids all over the world, a trending replacement of conventional synchronous generators by large wind power plants will likely result in the poor overall frequency regulation performance. On the other hand, permanent magnet synchronous generator wind Turbine System (PMSG-WTG) with full power back to back converters tends to become one of the most promising wind turbine technologies thanks to various advantages. It possesses a significant amount of kinetic energy stored in the rotating mass of turbine blades, which can be utilized to enhance the total inertia of power system. Additionally, the …

Cable Sizing And Its Effect On Thermal And Ampacity Values In Underground Power Distribution, Obinna E. Igwe

Theses and Dissertations--Electrical and Computer Engineering

Over the past decade, underground power distribution has become increasingly popular due to its reliability, safety, aesthetic characteristics, as well as the ever increasing focus on the environmental impacts of the various stages of power generation and distribution. With the technological advances in this area, the process of running these cables have become more economical and efficient.

This thesis explores the practice of grouping multiple three phase cables in a common conduit, using the duct bank process, and analyzes the thermal and ampacity consequences on the individual lines. This analysis is done in an effort to better define and understand …

Hybrid Diesel-Electric Drivetrain For Small Agricultural Field Machines, Joseph Jackson, Joseph S. Dvorak

Biosystems and Agricultural Engineering Faculty Publications

In this project, a series electric drivetrain sized for small agricultural machinery was developed and tested. Electric drives have noted benefits in simplicity, controllability, integration with other electronics such as those that provide autonomous action, and in efficiency over a wide operating range. Their biggest drawback for agricultural use is the limited capacity of electrical energy storage. A series hybrid drivetrain provides a method to overcome these capacity constraints through the use of chemical energy storage. The series hybrid drivetrain in this research was designed using well-established components. It consisted of a diesel-electric generator, a lead acid battery pack, a …

Thermoelectric Transport And Energy Conversion Using Novel 2d Materials, Luke J. Wirth

Browse all Theses and Dissertations

Nanomaterials hold great promise for applications in thermal management and thermoelectric power generation. Defects in these are important as they are generally inevitably introduced during fabrication or intentionally engineered to control the properties of the nanomaterials. Here, we investigate how phonon-contributed thermal conductance in narrow graphene, boron nitride (BN), and silicene nanoribbons (NRs), responds to the presence of a vacancy defect and the corresponding geometric distortion, from first principles using the non-equilibrium Green's function method. Analyses are made of the geometries, phonon conductance coefficients, and local densities of states (LDOS) of pristine and defected nanoribbons. It is found that hydrogen …

Microstrip Patch Antenna Design And Analysis For Wireless Power Applications, Zachary Pinz

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Computer Modeling Of A Solar Thermal System For Space Heating, Dhananjay D. Deshpande

Browse all Theses and Dissertations

Most applications of flat plate, low-temperature solar thermal panels are for water heating, such as producing domestic hot water or raising the temperature of swimming pools. This is reasonable given that the large masses of water present in these systems inherently provide built-in thermal energy storage so that a separate energy storage tank does not have to be purchased. For a space heating system, extra thermal energy storage generally has to be purchased and is a detriment to the economics of these systems. Despite the economic drawbacks of solar thermal space heating, this thesis focuses on the size of thermal …

A Clean Electricity Future: Assessing The Role Of Wide-Area Power System Operations In Supporting Weather-Driven Renewable Energy In The U.S., Paul D. Picciano

Pomona Senior Theses

Over the coming decades, renewable energy sources, namely wind and solar, will need to play a larger role in our nation’s energy mix as we seek to lower greenhouse emissions and respond to renewable energy policies and the EPA’s Clean Power Plan. This thesis assesses the role of wider-area power system operations in the U.S. as a powerful solution in supporting the integration of these weather-driven, variable energy resources that pose substantial challenges to grid reliability. The expansion and integration of organized electricity markets and transmission networks over wider geographic areas can (1) help reduce net-variability in wind and solar …

Market Based Control Of Pv Inverters In A Distribution System, Kumar Rishikesh

Theses and Dissertations--Electrical and Computer Engineering

A growing energy crisis, a rapid climate change, and a constant depletion of fossil fuel necessitates the role of renewable energy resources like PV (Photovoltaics) and wind energy to form a group of distributed sources of generation. These circumstances promote the use of renewable resources meeting the environmental commitments in terms of checking pollution and toxic footprints. A group of PV and wind energy generation units may work together as micro players to form smart grid systems and participate in an existing distribution system to meet a portion of the daily energy demand. This will help in minimizing the network …

Genetic Algorithms In Stochastic Optimization And Applications In Power Electronics, Mengmei Liu

Theses and Dissertations--Electrical and Computer Engineering

Genetic Algorithms (GAs) are widely used in multiple fields, ranging from mathematics, physics, to engineering fields, computational science, bioinformatics, manufacturing, economics, etc. The stochastic optimization problems are important in power electronics and control systems, and most designs require choosing optimum parameters to ensure maximum control effect or minimum noise impact; however, they are difficult to solve using the exhaustive searching method, especially when the search domain conveys a large area or is infinite. Instead, GAs can be applied to solve those problems. And efficient computing budget allocation technique for allocating the samples in GAs is necessary because the real-life problems …

Mathematical Model For Current Transformer Based On Jiles-Atherton Theory And Saturation Detection Method, Xiang Li

Theses and Dissertations--Electrical and Computer Engineering

Current transformer saturation will cause the secondary current distortion. When saturation occurs, the secondary current will not be linearly proportional to the primary current, which may lead to maloperation of protection devices. This thesis researches and tests two detecting methods: Fast Fourier Transform (FFT) and Wavelet Transform based methods. Comparing these two methods, FFT has a better performance in steady state saturation, and Wavelet Transform can determine singularity to provide the moment of distortion.

The Jiles-Atherton (J-A) theory of ferromagnetic hysteresis is one approach used in electromagnetics transient modeling. With decades of development, the J-A model has evolved into different …

Wide-Band Gap Devices For Dc Breaker Applications, Olukayode O. Sodipe

Master's Theses

With the increasing interest in wide-band gap devices, their potential benefits in power applications have been studied and explored with numerous studies conducted for both SiC and GaN devices. This thesis investigates the use of wide-band gap devices as the switching element in a semiconductor DC breaker. It involves the design of an efficient semiconductor DC breaker, its simulation in SPICE, construction of a hardware prototype and the comparative study of SiC and Si versions of the aforementioned breaker. The results obtained from the experiments conducted in the process of concluding this thesis show that the SiC version of the …

Autonomous Dc Microgrid With Self-Configurable Feasibility, Amir Farshad

Dissertations, Master's Theses and Master's Reports

Microgrids are power systems that work not only from the main power grid, but also in island mode operation. As each of the power sources and loads have voltage and current limitations, the autonomous microgrid should be able to control voltage and current levels while loads and sources are connected to the grid. Therefore, the microgrid bus voltage remains constant and power transfers safely.

To configure an autonomous microgrid, the load and source type identification comes to mind. An autonomous microgrid needs to know the type of the electrical components which are going to be connected to the grid. In …

Design And Simulation Of A Residential Pv-Battery System, Sevket Burak Ovali

Dissertations, Master's Theses and Master's Reports

This thesis provides the design and simulation of a stand-alone photovoltaic (PV) system to ensure the load demands for a single residential in Houghton (MI) and Tucson (AZ). The fundamental activities of this study aim to model for particular stand-alone photovoltaic of components. Entire stand-alone design stages for used load data sets are carried out. Daily irradiance and load data are taken into consideration throughout the design stages. The Simulink program is developed to obtain simulation results to observe PV system and battery behaviors regarding various months which have most various irradiances throughout 30 days. Sizing of PV systems is …

Modeling, Simulation And Control Of Hybrid Electric Vehicle Drive While Minimizing Energy Input Requirements Using Optimized Gear Ratios, Sanjai Massey

Dissertations, Master's Theses and Master's Reports

This project was conducted to analyze (model and simulate) and optimize an electric motor based drive system to propel a typical passenger vehicle in an urban driving environment. Although there are many HEV and EV type systems on the market today, this paper chose the Toyota Prius HEV system as a baseline using a brushless AC motor.

Although a vehicle can be driven many ways, a more standardized Urban Dynamometer Driving Schedule, UDDS, was chosen to simulate real driving conditions. This schedule is determined by the US Environmental Protection Agency, EPA, and is intended to represent the city driving conditions …

Deflector Effects In Fixed Bed (Biomass) Combustors And Non-Combusting Packed Beds, Babak Rashidian

Theses: Doctorates and Masters

Combustion can be used to thermally process biomass fuels and yield both heat and power in a sustainable manner. At present, direct combustion of solid biomass is the primary approach for generating electricity and heat when these fuels are used at a commercial scale.

Deflectors have been used in the freeboard section of industrial combustors to reduce radiant heat loss through flue gases and for particle emissions abatement. Freeboard deflectors can also influence emissions and freeboard temperature distributions by changing the flow dynamics. Despite much research into laboratory scale biomass combustion and packed beds, there have been no systematic studies …

Energy Efficiency And Carbon Dioxide Emissions Across Different Scales Of Iron Ore Mining Operations In Western Australia, Shanuka Dilhani Palamure

Theses: Doctorates and Masters

During the last two decades, Western Australian iron ore mining industry experienced an exponential production growth arising from increased global demand for steel. The upturn in the iron ore price and considerably lower production cost encouraged extensive mining and consequently high-grade ore reserves were gradually depleted. Despite the energy-intensive nature of mining, high profitability motivated the mining companies to extract marginal-grade deposits with additional processing requirements, which increased energy consumption and ultimately increased the cost of iron ore production. This thesis sought to identify the energy efficiencies of open-cut iron ore mining operations, in terms of scale of operation as …

Applications Of Carbon Materials In Electrochemical Energy Storage, Ji Liang, Lei Wen, Hui-Ming Cheng, Feng Li

Journal of Electrochemistry

An electrode material for electrochemical energy storage is one of the key components for high performance devices. In a variety of electrochemical energy storage systems, carbon materials, especially the lately emerged carbon nanomaterials including the carbon nanotube and graphene, have been playing a very important role and brought new vitality to the development and demonstration of the broad application prospects. In this review, we summarize the applications of various carbon materials in the typical electrochemical energy storage devices, namely lithium/sodium ion batteries, supercapacitors, and lithium-sulfur batteries, as well as flexible electrochemical energy storage and electrochemical catalysis. A perspective of novel …

Progress Of Self-Supported Supercapacitor Electrode Materials Based On Carbon Substrates, Shui-Jian He, Wei Chen

Journal of Electrochemistry

Self-supported electrode materials have been widely used in supercapacitors. Carbon materials are promising substrates in building self-supported electrode materials attributed to their diverse structures, rich resource, relatively low cost and high stability. Combined with our own research in this field, we summarize here the recent progress on the synthesis of self-supported electrode materials and their supercapacitance properties. The overall synthetic strategy could be divided into two categories: “top-down” and “bottom-up”. We hope this review is helpful for the development and application of renewable sources in self-supported electrode materials.

Synthesis Of Porous Carbon Nanosheets And Its Application In Sodium-Ion Battery, Jing-Fei Zhang, Jing Lu, Xiao-Yu Yang, Yun-Di Huang, Lin Xu, Dong-Mei Sun, Ya-Wen Tang

Journal of Electrochemistry

Owning to sodium’s high abundance, relatively low cost, similar chemical properties to Li and very suitable redox potential of E₀(Na⁺/Na) = -2.71 V versus SHE which is only 0.3 V above that of lithium, rechargeable sodium ion battery hold much promise as potential alternatives to current lithium ion batteries for energy storage applications. Carbon material is regarded as the most promising anode candidate for sodium ion battery. Particularly, carbon nanosheet with porous structure and high conductivity is expected to have improved sodium ion storage properties. In this paper, we present a two-step pyrolysis-based method for facile …

Effect Of Mno2 Content On Electrochemical Capacitance Behavior Of Active Carbon Electrode, Kun Shen, Xian-Liang Zhou, Qi-Shun Duan

Journal of Electrochemistry

In this work, the manganese dioxide (MnO₂) materials were prepared by solution approach at low temperature, thermal decomposition and electrochemical deposition. The actived carbon (AC) and MnO₂composite electrodes were used for aqueous supercapacitors. The morphologies and structures of the prepared materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and the electrochemical behaviors were tested by cyclic voltammetry (CV) and galanostatic charge-discharge tests. Electrochemical test data show that the maximum specific capacitances of 151, 172 and 141 F•g^-1were obtained with the contents of MnO₂being 70, 60 and 70% in …

Special Issue: Electrochemistry Of Carbon Materials, Wei Chen

Journal of Electrochemistry

Carbon materials are traditional electrode materials due to their excellent electrical conductivities, high electrochemical stabilities and wide potential windows. Glassy carbon, graphite, various activated charcoals, carbon fibers etc. have been widely used in electrochemistry serving as electrode substrates or supports. In addition to their applications in basic electrochemistry, carbon materials have also played important roles in electrochemical energy storage and conversion. In recent years, various types of carbon structures, from zero-dimensional carbon nanodots, one-dimensional nanotubes, two-dimensional graphene to three-dimensional porous carbons, have attracted increasing attention in electrochemical field. It has been found that carbon materials have outstanding properties as advanced …

Colloidal Ionic Supercapacitors, Kun-Feng Chen, Dong-Feng Xue

Journal of Electrochemistry

Supercapacitors have high power density and long cycle life compared with battery systems, but they still suffer from low energy density at the same time. In order to increase the energy density of supercapacitors, we have developed a new type of pseudocapacitor, called colloidal ion supercapacitor, which can directly use commercial metal salts as electrode materials and form electroactive matter by in-situ electrochemical reactions without the need of additional materials synthesis processes. Colloidal ion supercapacitor can fully utilize the redox reaction of metal cations with multiple oxidation states, which can completely release the stored electrical energy of multiple-valence cations, leading …

Carbon Aerogel/Nickel Foam As Electrode For High-Performance Supercapacitor, Zhong Wu, Xin-Bo Zhang

Journal of Electrochemistry

Herein, a facile synthesis has been explored to prepare carbon aerogel/Ni foam. Graphene oxide, resorcinol and formaldehyde serve as precursors and polymerize in-situ on the Ni foam after hydrothermal synthesis at 85 ℃. After lyophilization treatment, the carbon aerogel/Ni foam with porous structure can be obtained. Electrochemical investigations reveal that the carbon aerogel/Ni foam exhibits superior performances in both aqueous and organic electrolytes involving high specific capacitance and long-term cycling stability. The excellent properties can be ascribed to the unique formation and porous structure, which allows more effective transportations of electron and electrolyte ion.

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

LSU New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

An Organic Mixed Ion-Electron Conductor For Power Electronics, Abdellah Malti, Jesper Edberg, Hjalmar Granberg, Zia Ullah Khan, Jens W. Andreasen, Xianjie Liu, Dan Zhao, Hao Zhang, Yulong Yao, Joseph W. Brill, Isak Engquist, Mats Fahlman, Lars Wågberg, Xavier Crispin, Magnus Berggren

Physics and Astronomy Faculty Publications

A mixed ionic–electronic conductor based on nanofibrillated cellulose composited with poly(3,4-ethylene-dioxythio­phene):­poly(styrene-sulfonate) along with high boiling point solvents is demonstrated in bulky electrochemical devices. The high electronic and ionic conductivities of the resulting nanopaper are exploited in devices which exhibit record values for the charge storage capacitance (1F) in supercapacitors and transconductance (1S) in electrochemical transistors.

Energy Forecasting For Event Venues: Big Data And Prediction Accuracy, Katarina Grolinger, Alexandra L'Heureux, Miriam Am Capretz, Luke Seewald

Electrical and Computer Engineering Publications

Advances in sensor technologies and the proliferation of smart meters have resulted in an explosion of energy-related data sets. These Big Data have created opportunities for development of new energy services and a promise of better energy management and conservation. Sensor-based energy forecasting has been researched in the context of office buildings, schools, and residential buildings. This paper investigates sensor-based forecasting in the context of event-organizing venues, which present an especially difficult scenario due to large variations in consumption caused by the hosted events. Moreover, the significance of the data set size, specifically the impact of temporal granularity, on energy …

Power Protection Analysis For A Ten Bus System, Sean Hanna

Electrical Engineering

Each power system built in the industry requires a protection plan. Undetected faults in a power system can contribute to hazardous conditions, overheating of power devices, low or high system voltages, unbalanced conditions, and blackouts. This senior project is the design of a protection plan for a power system using the software Electric Transient Analyzer Program (ETAP). With ten buses, five transformers, two generators, two motors, and six transmission lines, there are many possibilities for a fault to occur. The Load flow and fault analysis are studied before the system is protected. All components of the system are protected using …

Utilization Of High Efficient Single Phase Motor, Kevin Hua

Electrical Engineering

A Smith Motor is a three phase induction motor that has shunt capacitors parallel to its induction coils. The shunt capacitors provide balance and allow the motor to operate using a single phase power supply. Preliminary studies show that the Smith Motor is more efficient than a single phase induction motor powered by a single phase power supply, but less efficient than a three phase induction motor powered by a three phase power supply. The Smith Motor’s advantage is its ability to operate from a single phase power source instead of having a three phase power source installed. Its limitation …

Design And Control Of A Bidirectional Dual Active Bridge Dc-Dc Converter To Interface Solar, Battery Storage, And Grid-Tied Inverters, Kenny George

Electrical Engineering Undergraduate Honors Theses

In order to further reduce the size of today’s power converters, wide bandgap semiconductor technologies are being explored. These devices, such as silicon carbide (SiC), have been shown to outperform their silicon counterparts when used in high frequency switching, high temperature, and high voltage applications. These properties make them highly desirable in the bidirectional dual active bridge power converter. Being an isolated converter topology, the dual active bridge employs a transformer to provide step-up/step-down functionality and galvanic isolation for the converter. Transformers, as well as other passive components such as inductors and capacitors may be reduced in size when higher …