Civil and Environmental Engineering Commons^™

Moving Bed Biofilm Reactors: Evaluation Of Geometry, Attachment Surface Material And Biofilm Populations On The Uptake Of Ammonia And Synthetic Organic Contaminants In Wastewater., Patrick D. Mclee

Civil Engineering ETDs

Plastic biofilm carriers are used in biological wastewater treatment to encourage the attachment and retention of microorganisms that metabolize pollutants. The following research was conducted to better understand how different characteristics of the biofilm carrier affect the treatment performance of the attached biofilms in moving bed bioreactors. Lab scale reactors were used in this study to grow nitrifying biofilms in reactors with contrasting and controlled conditions. The effect of surface geometry on nitrification performance was evaluated by testing commercially available moving bed bioreactor media that contrast in physical design, and by varying operational parameters. Additionally, mature biofilm from a similar …

Coupling Of Oxidation-Reduction Reactions Of Chromium, Iron And Manganese: Implications For The Fate And Mobility Of Chromium In Aquatic Environments, Chao Pan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Both within the United States and internationally, hexavalent chromium (Cr(VI)) is a contaminant of concern in drinking water supplies. The U.S. Environmental Protection Agency is considering a Cr(VI)-specific standard. Thus improved technologies for Cr(VI) removal in drinking water are needed. Iron electrocoagulation for Cr(VI) removal was examined at conditions directly relevant to drinking water treatment, and humic acid (HA) affects the performance of electrocoagulation in multiple ways. The success of the chromium treatment or remediation also relies on the stability of the Cr(III)-containing solids with respect to reoxidation under groundwater conditions. Manganese is ubiquitous in aquatic and terrestrial environments, and …

Multi-Scale Studies To Develop A Holistic Understanding Of Solid Fuel Combustion At Residential Scale, Sameer Patel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nearly 3 billion people rely on solid fuels for their cooking and heating needs, classifying them as “energy poor”. This poverty can be attributed to several factors, including a lack of resources (fuel), inefficient infrastructure (production and distribution), limited purchasing power (poverty), and ill-devised policies. Solid fuels, such as biomass, coal, and dung cakes, are burned in inefficient cookstoves. They generate products of incomplete combustion (PIC), such as CO, particulate matter (PM), and CH4, causing household air pollution (HAP) whose adverse impacts on both health and the environment have been well established.

HAP causes diseases such as chronic obstructive pulmonary …

Development Of Design Equations For Drilled Shafts In Granular Dense Soils Using Dem Simulations, Sadia Faiza

Civil Engineering ETDs

Drilled shafts have proven to be cost-effective, excellent performing, deep foundation systems where large loads and lateral resistance are major factors. The available design methods that are recommended by FHWA (2010) for drilled shafts are mostly empirical and are developed based on generalized data which sometimes can be conservative for a particular soil. The main objective of this study is to develop a design methodology for estimating the side resistance of an axially loaded drilled shaft based on the current and the unique properties of the soil. The objective was met through using the discrete element method (DEM) to investigate …

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

Drone-Enabled Remote Sensing For Transportation Infrastructure Assessment, Colin Brooks

INSPIRE Archived Webinars

Unmanned aerial systems (UAS or “drones”) are a rapidly developing technology that can help meet the needs of transportation agencies for reliable, repeatable data that can save money and increase safety for the data collection process. By taking advantage of flexible platforms that can deploy a variety of sensors, transportation agencies and their information suppliers can help meet these data needs for operations, asset management, and other areas. Location-specific data on infrastructure condition and distresses can help with improved management of assets.

In this presentation, recent applied research led by a Michigan Technological University team is reviewed, with a focus …

Development Of The New Educational Content "Small Uas In Civil Engineering Application Scenarios", E. Levin, K. Vach, R. Shults

Michigan Tech Publications, Part 1

The key point of this paper is presentation of the main idea and some results of the project "Small UAS in civil engineering application scenarios" (SUAS-CAS). This project was proposed by newly established in 2016 ISPRS WG V/7: "Innovative Technologies in Training Civil Engineers and Architects". Here we are presenting our experience in using low-cost UAS in training architects at Kyiv National University of Construction and Architecture, which was chosen as basic for this project. In the first part of paper, the project outline is presented. Then the first and possible follow project outcomes were described. In some details is …

Structural Behavior Of Lap Shear Connections With Thermally Insulating Filler Plates, Salih Qasim Mahmood

Dissertations and Theses

This research consists of experimental load tests and numerical simulations of structural steel connections with various filler materials to study the effect of non-steel fillers on the connection strength. Non-steel fillers are used in the steel connections to provide thermal insulation by reducing thermal bridging. Eight specimens having steel and polypropylene filler plates of various thicknesses were tested in the laboratory. The collected data were compared to a Finite Element Analysis (FEA) using ABAQUS to validate the numerical results. After validation, three parametric studies were conducted using ABAQUS to provide insight into general behavior of connections with a variety of …

2017 Fall Engr333 Seminar Preservation, Trevor Nyeholt, Erik Karlson, Cam Richman, Tyson Butler

ENGR 333

File for student presentation, given by students in the Fall 2017 class of ENGR333.

2017 Fall Engr333 Poster (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richard Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Previously, Calvin College had a cogeneration system with the purpose of generating electricity and heat, through the combustion of natural gas, for Calvin’s campus. The original co-gen system was removed in 2017 due to high costs associated with maintenance and operations. Without a co-gen system, Calvin College is fully dependent on the grid. To save money and help in the President’s Carbon Commitment, PCC, the mechanical engineering students of ENGR 333 (section B) propose the implementation of a new co-gen system.

2017 Fall Engr333 Poster (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College uses 161,000 MMBTU of natural gas per year, which correlates to $836,000 of annual expenses. However Calvin could save as much as $240,000 on natural gas if they were as efficient as the top performer in an energy audit of similar colleges and universities in the Midwest, conducted by Sightlines Institute. The goal of this project was to see what actions could be taken to save the college $75,000 in annual natural gas costs.

Development Of An Algorithm For Satellite Remote Sensing Of Sea And Lake Ice, Peter Dorofy

Theses and Dissertations

Satellite remote sensing of snow and ice has a long history. The traditional method for many snow and ice detection algorithms has been the use of the Normalized Difference Snow Index (NDSI). This manuscript is composed of two parts. Chapter 1, Development of a Mid-Infrared Sea and Lake Ice Index (MISI) using the GOES Imager, discusses the desirability, development, and implementation of alternative index for an ice detection algorithm, application of the algorithm to the detection of lake ice, and qualitative validation against other ice mapping products; such as, the Ice Mapping System (IMS). Chapter 2, Application of Dynamic Threshold …

Utilizing High-Resolution Archived Transit Data To Study Before-And-After Travel-Speed And Travel-Time Conditions, Travis Bradley Glick

Dissertations and Theses

Travel times, operating speeds, and service reliability influence costs and service attractiveness. This paper outlines an approach to quantify how these metrics change after a modification of roadway design or transit routes using archived transit data. The Tri-County Metropolitan Transportation District of Oregon (TriMet), Portland's public transportation provider, archives automatic vehicle location (AVL) data for all buses as part of their bus dispatch system (BDS). This research combines three types of AVL data (stop event, stop disturbance, and high-resolution) to create a detailed account of transit behavior; this probe data gives insights into the behavior of transit as well as …

Multi-Hazard Performance Assessment Of High-Rise Buildings, Jad El Khoury Antoun

LSU Master's Theses

In the last few decades, there has been an important increase in building high-rise constructions in many cities around the world. Since they offer several benefits in populous areas in terms of space efficiency, economy and sustainability, tower buildings attracted practitioners and researchers to understand better their exclusive behavior and response to natural hazards (e.g., hurricanes, earthquakes). Because of their flexibility and their commonly limited damping, skyscrapers are more susceptible to wind and earthquake actions than low- and mid-rise buildings. Moreover, many locations are prone to multiple hazards; hence, it is important to understand thoroughly the structural behavior of structures …

Dynamic Façades Towards Greener Energy Efficient Buildings, Rayce Martin, Iraj Mamaghani, Nikoloas Nikitas

Essential Studies UNDergraduate Showcase

Mitigating global climate change is a major contemporary topic of research and is of major interest to today’s societies. Developed countries the top contributors to the destruction of the climate with buildings in these countries being one of the reasons. Buildings in developed countries account for 20-40% of the total primary energy consumption. This high-energy consumption produces approximately 36% of the total CO2 emissions since fossil-fuels are the primary source of energy in almost all developed countries. To combat this, researchers have investigated wind energy harvesting technologies that produce electricity while also being considered “green”, or low carbon dioxide emitters. …

College Of Engineering Senior Design Competition Fall 2017, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Metabolism And Photolysis Of 2,4-Dinitroanisole In Arabidopsis, Hunter W. Schroer, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

New insensitive munitions explosives, including 2,4-dinitroanisole (DNAN), are replacing traditional explosive compounds to protect soldiers and simplify transport logistics. Despite the occupational safety benefits of these new explosives, feasible strategies for cleaning up DNAN from soil and water have not been developed. Here, we evaluate the metabolism of DNAN by the model plant Arabidopsis to determine whether phytoremediation can be used to clean up contaminated sites. Furthermore, we evaluate the role of photodegradation of DNAN and its plant metabolites within Arabidopsis leaves to determine the potential impact of photolysis on the phytoremediation of contaminants. When exposed to DNAN for three …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …

Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad

Makara Journal of Technology

Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …

Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …

Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid

Makara Journal of Technology

In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.

Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul

Makara Journal of Technology

This paper reports the synthetic, characterization and theoretical evaluation of new class of hybrid Heck-immine system involving mixed moieties of vinylene (C=C) and azomethines (CH=N) which has been successfully integrated into an addition of organic semiconducting materials. The assessment of 4-[(hexyloxyphenyl)methylene]amino)-4’-chloro-stilbene (HEXCS) based on Donor (D)-π-Acceptor (A) was evaluated as active semiconductor material candidates via several spectroscopic and analytical techniques. In turn, the investigation of its potential as dopant system in conductive film was successfully deposited on indium tin oxide (ITO) coated substrate via spin coating method. The relationship between electronic and optical properties, chemical modelling at molecular interactions and …

Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo

Makara Journal of Technology

An audio-magnetotelluric (AMT) survey has been performed at Cepu oil field located in Indonesia. The objective of this research is to detect resistivity structures of this important hydrocarbon rock. This research can be classified as an innovation in application of the AMT method for hydrocarbon exploration. The lack of seismic resolution has been provided by the AMT method, especially in the location of sub-basalt and sub-salt plays. In additional, the cost of AMT survey is quite low compared to seismic. The forward modelling is included in this research to understand the measurement data response from a mathematical model. In the …

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building: Revit Up, Gimelle Jacala, Colin Strong, Jason Wu

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Amplification Of Earthquake Ground Motions In Washington, Dc, And Implications For Hazard Assessments In Central And Eastern North America, Thomas L. Pratt, J. Wright Horton Jr., Jessica Munoz, Susan E. Hough, Martin C. Chapman, C. Guney Olgun

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The extent of damage in Washington, DC, from the 2011 M_W 5.8 Mineral, VA, earthquake was surprising for an epicenter 130 km away; U.S. Geological Survey “Did-You-Feel-It” reports suggest that Atlantic Coastal Plain and other unconsolidated sediments amplified ground motions in the city. We measure this amplification relative to bedrock sites using earthquake signals recorded on a temporary seismometer array. The spectral ratios show strong amplification in the 0.7 to 4 Hz frequency range for sites on sediments. This range overlaps with resonant frequencies of buildings in the city as inferred from their heights, suggesting amplification at frequencies to …