Civil and Environmental Engineering Commons^™

Dynamics Of Suspended Sediment Flux On The Rivers Bandon And Owenabue, Ireland, S. T. Harrington, Joseph R. Harrington

Publications

Monitoring, analysis and modelling of suspended sediment transport in riverine systems has received much attention in recent decades. Quantitive analysis techniques have been applied to allow river basin managers to assess suspended sediment transport and its importance in transporting a range of pollutants including excess metals and nutrients, which negatively impact on aquatic systems. In this paper, an analysis of the suspended sediment fl ux (SSF) dynamics is presented for the small and medium sized catchments of the River Owenabue and the River Bandon, respectively. The results contribute to the fi lling of a research gap in an Irish context …

Assessment Of Quality Stability Of Composite Flours Produced By Dar Es Salaam Smes, Leonard Rweyemamu

Tanzania Journal of Engineering and Technology (TJET)

A study was conducted to assess quality stability of cereal flours processed by food processing SMEs in Dar es Salaam. This product is obtained by mixing various cereal grains and is considered as of higher nutritional values in Tanzania. The shelf-life was predicted by determining water activity (aw) and moisture content (MC) levels and plotting the water sorption isotherms (MSI). Ninety per cent of investigated samples (N=78) were found packaged in the materials of various quality conditions. It was found that the packaging materials mostly used is plastic films (63%), paper packets/bags (26%), hard papers (3%), plastic jars (1%) and …

Application Of Trip Generation Models For Urban Transport Planning In A Data Scarce Developing Country City: The Case Of Dar Es Salaam, Hannibal Bwire

Tanzania Journal of Engineering and Technology (TJET)

With the increase in travel demand and traffic management problems in many developing countries cities, travel demand forecasting models are being employed increasingly to make informed decisions about the operational improvements to the existing transportation system and the design and performance of future transportation systems. The main advantage of using travel demand forecasting models for such purposes is that they are capable of capturing the interactive effects of different components of the system under study. However, for some time now there have been concerns about the application of transport planning models in developing countries. The concerns have been mainly in …

Properties Of Boards Made From Rice Husk And Portland Cement As Binders And Reinforced With Sisal Fibres, Alex Mrema

Tanzania Journal of Engineering and Technology (TJET)

A research study demonstrated that rice husks can be used to manufacture boards which can be used in low cost housing if bound by Portland limestone cement (CEM II/A-L/ 32.5R) and reinforced with sisal fibers to cater for their brittle behavior and that such boards can provide a substitute for wood panels. Boards made of rice husks and cement in the ratios of 1/3.3, 1/ 3.6 and 1/4 and with sisal fiber reinforcement contents of 0%, 0.4%, 0.5% and 0.8% were prepared and tested for their physical and mechanical properties. The results were compared with standard requirements for boards made …

Environmental Study Of The Release Of Btex From Asphalt Modified With Used Motor Oil And Crumb Rubber Modifier, Daniel Bergerson, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The need to be more environmentally conscious has recently shifted toward the forefront of society. With this new focus on environmentally responsible behavior comes the practice of using recycled materials in construction when possible. Therefore it is necessary to carefully evaluate the safety of any recycled materials being used in pavement materials. Under this study, a reference of testing is presented and implemented to test leachate of samples of two different asphalt binder types containing used motor oil (UMO) and/or crumb rubber modifier (CRM) for the presence of benzene, toluene, ethylbenzene, and xylenes (BTEX). Alongside batch leaching tests, air testing …

Electro-Disinfection Of Municipal Waste Water Using Direct Current, Julio A. Acosta Vega

LSU New Orleans Theses and Dissertations

Wastewater treatment has always been a problem to human settlers. Events such as the great stink of London during the summer of 1858 have pushed engineers into developing new technologies to deal with such wastes in effective and safe ways. Research projects like this aim to find ways of improving performance, economics, or environmental friendliness of treatment and disinfection methods.

This thesis deals with the effectiveness, mechanisms of action, by-products and side effects of using DC current to disinfect secondary effluent. It is proposed as an alternative to conventional methods, such as chlorination, which are not always environmentally friendly or …

Electrochemical Disinfection Of Municipal Wastewater Using Alternating Current, Xavier A. Chavez Reyes

LSU New Orleans Theses and Dissertations

This research focused on chlorine-free disinfection of wastewater by complying with today's regulations. The equipment used was a continuous flow electrochemical reactor connected to an alternating current (AC) power supply. The electrodes used were made out of titanium coated with iridium oxide. To determine the inactivation of Escherichia Coli, a bacterial count method based on the USEPA method 1603 was used.

After several experiments it was determined that electrochemical disinfection using AC was not efficient and economic enough to be classified as a viable alternative to chlorine disinfection. It was demonstrated that chlorine can be produced by electrolysis using AC …

2014 Fall Engr333 Project Final Report, John Sherwood, Jonathan Crow, Nicolaas Ourensma, Zak Devries, Andy Frandsen, Jack Kregel, Ryan Rhodes, Connor Vandongen, Schieffer Kwong, Jee Myung Kim, Matthew Deyoung, Jeff Demaagd, Tyler Devries, Doug Faber, Garrick Hershberger, Jake Derooy, Dustin Brouwer, David Evenhouse, Patrick Anderson, Thomas Brown, Ed Smit, Joel Smith, Thane Symens, Kaitlyn Weinstein, Seth Koetje, Nick Memmelaar, Austin Juza, Matt Ramaker, Ryan Demeester, Jordan Newhof, Wes Richards, Josh Vanderbyl

ENGR 333

The net-zero homes project that this class worked on throughout the semester was designed to determine what it would take to bring a home in Grand Rapids, Michigan to the status of net-zero and whether or not it is feasible to do so. The idea behind a net-zero home is to reduce the energy usage in the home, whether it is by lifestyle changes, insulation additions, or by appliance upgrades, and then produce the remaining energy deficit from renewable sources, so that the homeowner has a net usage of zero at the end of the year. This report details the …

Analysis Of Heart Rate Variability Amongst Cyclists Under Perceived Variations Of Risk Exposure, Ronan Doorley, Vikram Pakrashi, Eoin Byrne, Samuel Comerford, Bidisha Ghosh, John A. Groeger

NIMBUS Articles

Cycling as a mode of travel provides an opportunity for many people to increase their levels of regular physical activity and contribute to their mental and physical health. Heart rate is often used as a means of measuring the intensity and energy expenditure of physical activity. However, heart rate is also linked to emotional factors such as anxiety and fear. Perceptions of risk due to external factors such as other road users and infrastructure may arouse such emotions in urban cyclists. The present study set out to investigate whether or not perceptions of risk among urban cyclists may lead to …

Scheduling Of Container Handling Equipment In Marine Container Terminals, Narges Kaveshgar

Theses and Dissertations

To improve the competitiveness of marine container terminals, it is critical to minimize the makespan of a container vessel. The makespan is defined as the latest completion time among all handling tasks of the container vessel. Lower makespan (i.e. lower vessel turn time) can be achieved through better scheduling of the container handling equipment during vessel operations. The scheduling of terminal equipment is an operational problem, and a detailed schedule for each type of equipment operating in the terminal is necessary. Several studies have applied operations research techniques to optimize the processes of equipment in a terminal. This dissertation investigates …

Functionalized Graphitic Nanoreinforcement For Cement Composites, Nima Zohhadi

Theses and Dissertations

Physical and mechanical properties of graphitic nanomaterials, in particular multiwalled carbon nanotubes (MWCNTs) and graphene nano-platelets (GNPs) make them promising candidates for nanoreinforcement of cement composites. The two key challenges associated with the incorporation of MWCNTs and GNPs are to attain uniform dispersion and interfacial bonding within the composite matrix. The effects of three main-stream dispersion techniques (namely, ultrasonication, acid-etching, and surfactant-coating) on the mechanical properties and microstructure of MWCNT- and GNP-cement composites were experimentally studied. Compressive strength tests and different characterization techniques including dynamic light scattering, Raman spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission …

Numerical Modeling Of Free Surface Flows Using Depth Averaged And 3d Models, Khaled Mamdouh Mohamed Abdo

Theses and Dissertations

The objectives of the research presented in this dissertation are to develop and apply numerical models to study free surface flows under different boundary conditions, bedform geometry and channel configuration. A 2D depth-averaged model is developed by solving the Saint Venant or the shallow water equations using a finite volume method. An existing 3D model, developed in-house, that solves the Reynoldsaveraged Navier-Stokes equations and conservation equations for suspended sediment and conservative species is adapted for free surface flows by solving the volume of fluid (VOF) equation using a compressive interface capturing scheme for arbitrary meshes, CICSAM. The depth-averaged or shallow …

An Engineering Approach For The Design Of Archaeological Reburial Systems, Angel Ari Perez Mejia

Theses and Dissertations

Archaeological sites are a non-renewable resource which is often our only link to the past. However, sites are under constant threat of destruction due to construction activities. Civil engineers and archaeologists must the work together to ensure both the continued survival of archaeological sites while allowing for development to continue. Reburial systems, when properly designed and constructed, allow for the protection of archaeological sites while allowing the continued use of the land. However, because reburial as an intentional conservation technique is relatively modern, practice is fragmented and there are no universally accepted guidelines. Current reburial system design relies on prescriptive …

Application Of Various Adsorbents To Remove Micro-Pollutants In Aquatic System, Chanil Jung

Theses and Dissertations

Untreated or insufficiently treated pharmaceuticals and endocrine disrupting compounds (EDCs) as well as heavy metals have influenced the ecosystem and their exposures in the water system have threatened human health; causing cancers and adverse health effect to immune system. While various water treatment techniques have been applied to solve this problem, adsorption has been considered as one of the most efficient and manageable water purification techniques. Advanced analysis methods for aqueous contaminants have improved comprehension, allowing proficiency about the fate of trace leveled emerging contaminants, thus allowed to reveal the adsorption mechanisms of each pollutant. This dissertation focuses on the …

Context-Sensitive Seismic Strengthening And Repair Of Substandard Confined Masonry, Rahim Ghorbani

Theses and Dissertations

Confined masonry (CM) is a construction system consisting of load-bearing masonry panels that are confined with cast-in-place reinforced concrete tie columns and beams. Due to satisfactory seismic performance, CM has become the predominant low-rise residential construction system in several areas around the world. However, in developing regions, the use of substandard materials, details and construction practices may result in inadequate performance as highlighted in the 2010 earthquakes in Haiti and Chile. In the aftermath of an earthquake, households are often reluctant to reoccupy their dwellings due to concerns about safety of structures. If feasible, preventive (pre-hazard) strengthening or structural repair …

Applications Of Remote Sensing To The Study Of Estuarine Physics: Suspended Sediment Dynamics In The Columbia River Estuary, Austin Scott Hudson

Dissertations and Theses

Estuarine circulation and its associated transport processes drive the environmental integrity of many near-shore habitats (the coastal ocean, rivers, estuaries and emergent wetlands). A thorough understanding and consideration of this circulation is, therefore, vital in the proper management of these habitats. The aim of this study is to bring together theory and new satellite observations in the Columbia River Estuary to increase our understanding of estuarine circulation and transport. Surface reflectance measurements gathered by the Moderate Imaging Spectroradiometer (MODIS) are first compared to in situ observations to develop an empirical model for remotely derived surface turbidity. Results indicate that MODIS …

Agenda For Second Meeting Of The Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Membership Of Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Honor Stalwarts, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Center Of Excellence In Geotechnical Earthquake Engineering And Soil Dynamics At Iit Roorkee, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Soil Dynamics Course In Curriculum, Deepankar Choudhury

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Modeling The Snow Surface Temperature With A One-Layer Energy Balance Snowmelt Model, J. You, David G. Tarboton, C. H. Luce

Civil and Environmental Engineering Faculty Publications

Snow surface temperature is a key control on and result of dynamically coupled energy exchanges at the snow surface. The snow surface temperature is the result of the balance between external forcing (incoming radiation) and energy exchanges above the surface that depend on surface temperature (outgoing longwave radiation and turbulent fluxes) and the transport of energy into the snow by conduction and meltwater influx. Because of the strong insulating properties of snow, thermal gradients in snow packs are large and nonlinear, a fact that has led many to advocate multiple layer snowmelt models over single layer models. In an effort …

A Revisit Of The Equilibrium Assumption For Predicting Near-Wall Turbulence, Farid Karimpour, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, we revisit the consequence of assuming equilibrium between the rates of production (P) and dissipation (∈) of the turbulent kinetic energy (k) in the highly anisotropic and inhomogeneous near-wall region. Analytical and dimensional arguments are made to determine the relevant scales inherent in the turbulent viscosity (νt) formulation of the standard k-∈ model, which is one of the most widely used turbulence closure schemes. This turbulent viscosity formulation is developed by assuming equilibrium and use of the turbulent kinetic energy (k) to infer the relevant velocity scale. We show that such turbulent viscosity formulations are not suitable …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• Department Update

Climate Change And Stream Temperature Projections In The Columbia River Basin: Habitat Implications Of Spatial Variation In Hydrologic Drivers, Darren L. Ficklin, B. L. Barnhart, J. H. Knouft, Iris T. Stewart-Frey, Edwin P. Maurer, Sally L. Letsinger, G. W. Whittaker

Civil, Environmental and Sustainable Engineering

Water temperature is a primary physical factor regulating the persistence and distribution of aquatic taxa. Considering projected increases in air temperature and changes in precipitation in the coming century, accurate assessment of suitable thermal habitats in freshwater systems is critical for predicting aquatic species' responses to changes in climate and for guiding adaptation strategies. We use a hydrologic model coupled with a stream temperature model and downscaled general circulation model outputs to explore the spatially and temporally varying changes in stream temperature for the late 21st century at the subbasin and ecological province scale for the Columbia River basin (CRB). …

Seismic Performance Of Precast Girder-To-Cap Beam Connections Designed For Abc, Sri Sritharan, Justin Vander Werff, Robert Peggar, Ron Bromenschenkel

Faculty Work Comprehensive List

The behavior of critical connections between prefabricated elements in bridges utilizing accelerated bridge construction (ABC) methods continues to be of utmost interest. Some of these connections will experience excessively high demand in regions that are susceptible to high seismic load. This paper presents a large-scale experimental study that investigated seismic performance of the connection between precast concrete I-shaped girders and a concrete inverted-tee cap beam using two different details. The ability of the girder-to-cap connection to successfully resist positive moment and the corresponding shear under combined gravity and seismic effects was of particular interest. The effect of vertical seismic acceleration …

College Of Engineering Senior Design Competition Fall 2014, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Design Of Gan-Based Low-Loss Y-Branch Power Splitter, Retno Wigajatri Purnamaningsih, Irma Saraswati, Nji Raden Poespawati, Elhadj Dogheche

Makara Journal of Technology

We present a Y-branch power splitter design with a multimode section using GaN on Sapphire at telecommunication wavelength. The GaN sample optical properties were also investigated, resulting in a refractive index for the GaN layers nTE=2.289±0.001 and nTM=2.324±0.00. Optimization of the structure parameters for this structure was conducted accurately using BPM methods. The results demonstrated the possibility of realizing a GaN-based Y-branch power splitter for various applications.

Ultra-Wideband Notched Characteristic Fed By Coplanar Waveguide, Rastanto Hadinegoro, Yuli Kurnia Ningsih, Indra Surjati

Makara Journal of Technology

In this paper, a novel Ultra-Wide Band (UWB) notch patch antenna with co-planar waveguide (CPW) fed is presented. This antenna only used one layer and the patch antenna is constructed on the first layer and back to back with CPW fed and bottom part is ground plane. The width notch is used to achieve the UWB characteristic. The results shown that the impedance bandwidth is 1130 MHz (1.662–2.792 GHz) or about 50.7% for VSWR <2.

Analysis Of Vibration Generated By The Rubbing Of Flat Surfaces, Zahrul Fuadi

Makara Journal of Technology

Among the phenomena that occur as a result of contact between two surfaces is friction sound, in which surface roughness is of great importance. In this study, the parameter of contact stiffness is used to explain the frequency characteristic of vibration generated by the rubbing of flat surfaces under a small load. A 3-disk configuration rubbing method was used, which provides a unique characteristic of the system's frequency response function containing specific information about the rubbing vibrations. It is shown that the peak frequency of the rubbing vibration can be explained by using a two-degrees-of-freedom model incorporating the parameter of …