Dynamic Baseline Schedule Updates Using Digital Twinning: A Case Study On Aluminum Formwork Construction, Ahmed Hamdi Sweilam

Theses and Dissertations

Repetitive high-rise construction using aluminum formwork couples consecutive floor cycles through a reused panel set and a floor-level inspection and pour barrier, so productivity loss compounds upward rather than being absorbed locally. The baseline schedule is nevertheless fixed before execution and is not revised as evidence of realized productivity accumulates. This thesis develops a simulation-based digital twin that updates the baseline from observed as-built durations and acts on its own forecast. A discrete-event simulation of a ten-story residential tower is built in AnyLogic® and verified analytically at 180.00 hours per floor. After each completed floor the twin infers activity productivity …

Simulation-Based Assessment Of Operational And Retrofit Solutions For Effluent Compliance Of A Capacity-Limited Oxidation Ditch Wwtp, Ahmed Sameh Harash

Theses and Dissertations

Oxidation-ditch wastewater treatment plants (WWTPs) across Egypt's Nile Delta are increasingly carrying hydraulic and organic loads beyond what they were designed for. This work can be considered pioneering as this work compared operational and structural retrofit alternatives for such a plant within a single verified simulation framework. The present study fills that gap by building a digital twin of the Qaha WWTP, a dual-train Carrousel oxidation ditch in Qalyubia Governorate, calibrated to a baseline flow of 7,420 m³/day in the SUMO24 platform (a third-generation, open-source wastewater treatment process simulation software) using the SUMO2c biokinetic model (a simplified variant of Activated …

Sustainable – Low-Cost - Upgrade Of Activated Sludge Process For Nitrogen And Phosphorus (N&P) Removal From Wastewater, Abanoub N. Basta

Theses and Dissertations

Many municipal wastewater treatment plants (WWTPs) in developing countries were designed primarily for organic matter and suspended solids removal and therefore face increasing difficulty in meeting modern nitrogen (N) and phosphorus (P) discharge requirements. Conventional biological nutrient removal upgrades commonly require additional reactor volume, recirculation systems, aeration energy, and capital investment. Accordingly, sustainable retrofit strategies that improve nutrient removal within existing treatment footprints are increasingly needed, particularly in water-scarce and land-constrained regions.

This study investigated the integration of water hyacinth (Eichhornia crassipes) into the aeration stage of an activated sludge process as a hybrid nature-based enhancement for nitrogen and phosphorus …

A Comparative Study: Force Majeure And The Theory Of Unforeseen Circumstances Across Different Jurisdictions In The Middle East, Omar Hamed Sawan

Theses and Dissertations

The motivation behind this study stems from recent global disruption events that impact construction projects worldwide. These events vary across a wide spectrum, whether they are political events such as the Russo-Ukraine war or the war in the Middle East, economic events such as inflation or currency devaluations; or environmental events such as climate change and the emergence of public health crises like the Covid-19 pandemic. These series of events underscore the growing importance of understanding how the different legal frameworks address unforeseeable events in the construction industry. In this context, force majeure and the theory of unforeseen circumstances (also …

A Framework For Automated Quantity Extraction From .Ifc Models And Normalized Bid Comparison, Asmaa Mohamed Farouk

Theses and Dissertations

Accurate bid comparison remains a major challenge in construction tendering due to

differences in Bill of Quantities formats, item naming conventions, and pricing methods across

contractor submissions. These variations require time-consuming manual work and often lead to

subjective decisions. This research presents a computational framework that uses Building

Information Modeling through the .ifc file format, combined with text analysis techniques for

automated bid normalization.

The developed system uses a dual-component approach. Phase 1 extracts quantities from .ifc

model files using 3D geometric calculations, automated element classification. Phase 2 uses text

mining with a domain-specific dictionary of construction terms to interpret …

Dual-Polymer Concrete With Recycled Pet And Hdpe Aggregates: Mechanical And Durability Performance Assessment, Omar Abd El Mageed Hammouda

Theses and Dissertations

This study investigates the fresh, mechanical, durability, thermal, performance as well as preliminary financial aspects of dual-polymer concrete incorporating recycled polyethylene terephthalate (PET) as a partial replacement for fine aggregate and recycled high-density polyethylene (HDPE) as a partial replacement for coarse aggregate, with silica fume as a supplementary cementitious material held constant at 10% by weight of cement. The study responds to the convergence of two pressing challenges in the Egyptian context: the scale of plastic waste mismanagement, which results in widespread informal open burning and environmental contamination, and the high operational energy demand of residential buildings in Egypt's hot …

The Influence Of Rainfall And Land Cover Change On Streamflow Variability In Eastern Florida Watersheds, Brynn Romberger

Theses and Dissertations

Streamflow in Florida watersheds is influenced by both land cover change and rainfall variability, but separating their contributions is difficult because both have changed over recent decades. This study evaluated rainfall trends and land cover change to determine which better explains flood and drought threshold exceedance across 27 USGS streamflow gauges within the St. Johns River Water Management District (SJRWMD) from 1985 to 2025. Streamflow was characterized using change-point, trend, and variability analyses with a six-threshold exceedance framework. Land cover was quantified using the National Land Cover Database (NLCD), rainfall characteristics were derived from the Analysis of Records for Calibration …

Identifying Failure Behaviors In Stereolithography From Varied Print Orientations, Kevin Veltre

Theses and Dissertations

Stereolithography (SLA) is an additive manufacturing (AM) technique that utilizes photopolymerization to create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully considered when designing products and print processes for desired components, as manufacturers often fail to include all relevant print settings when advertising mechanical properties. For this study, 130 SLA-printed specimens were created with 100-micron print layer thickness and print orientations varying between 0 and 90, including intermediate orientations, to observe …

Policy Analysis Of The Inclusion Of Mitigation Measures In The Re-Design And Construction Of The New Frances Scott Key Bridge, Patrick John O'Connor

Theses and Dissertations

This thesis discusses the tragic event of the container ship MV Dali impacting the Francis Scott Key Bridge on March 26, 2024, leading to the collapse of the structure and killing six people despite having collision mitigation protections in place. This research examines how late twentieth-century structures are inadequate for current shipping demands and emphasizes that updated mitigation design criteria must accommodate larger modern vessels as governments replace or upgrade these structures. This paper will examine four case studies of different collisions that have similar circumstances to the Francis Scott Key Bridge collapse and review National Transportation Safety Board reports …

Fatigue And Healing Performance Of Asphalt Materials Modified With Nanomaterials And High-Polymer Asphalt Binders, Samuel M. Addai

Theses and Dissertations

Fatigue cracking is one of the primary distress mechanisms affecting asphalt pavement durability under repeated traffic loading and environmental aging. Although asphalt binders possess an inherent ability to heal micro-damage during rest periods, this healing capacity is often insufficient to fully counter progressive fatigue damage under field conditions. This thesis investigates the fatigue and self-healing behavior of asphalt binders and mixtures modified with nanomaterials and advanced polymer-based systems. Nanomodified binders were evaluated using Linear Amplitude Sweep (LAS) and Linear Amplitude Sweep with Healing (LASH) tests within the VECD framework to quantify fatigue resistance and healing behavior under different rest periods …

Transport Properties And Microstructural Development Of Co₂-Cured, Co₂-Infused, And Cold-Weather Concrete, Arlene Jane Looc

Theses and Dissertations

This research aims to advance the understanding of durability and transport behavior in emerging CO₂-cured and cold-weather concrete technologies. Limited work has examined long-term durability indicators such as permeability, resistivity, and pore connectivity in these types of concrete. To bridge this gap, the study evaluates transport properties alongside microstructural changes that govern the progression of hydration and the evolution of pore structure. This study measures transport properties, determines correlations between resistivity and fluid ingress, and analyzes the evolution of pore structure. To achieve this, the experimental program evaluated three concrete mixtures for external CO₂ exposure, nine for dry ice infusion, …

From Aspiration To Obligation: A Contractual Sustainability Framework For The Egyptian Construction Industry, Salma Ali

Theses and Dissertations

The construction industry is responsible for approximately 40% of global energy consumption and 35% of total waste generation, making it one of the most significant contributors to the global sustainability challenge. In Egypt, that challenge takes a specific contractual form. Egypt’s construction sector contributes approximately 23% of national energy consumption, yet the survey findings reveal that 63.5% of construction professionals report that sustainability clauses rarely or never appear in contracts, and only 11.5% confirm the presence of enforceable provisions with measurable targets. This gap is structural rather than attitudinal. Competitive procurement penalises voluntary sustainability investment, and without contractual obligation, awareness …

Flexible-Mode Multi-Skilled Resource-Constrained Project Scheduling Problem With Setup Times: Application In The Oil And Gas Industry, Safinaz M. El Dawody

Theses and Dissertations

Turnaround maintenance (TAM) in the petroleum refining sector requires coordinating geographically dispersed project portfolios under stringent resource, schedule, and budget constraints. Conventional scheduling models treat tasks in isolation, failing to account for shared resources, crew fatigue, or inter-site transit. To bridge this gap, this study introduces and empirically validates a Flexible-Mode Multi-Skilled Resource-Constrained Project Scheduling Problem with Setup Times (FM-MS-RCPSP-ST). Applied to a real-world portfolio of 76 TAM projects across five governorates in Egypt, the framework is operationalized through an 11-stage pipeline integrating NSGA-II multi-objective optimization, GIS-based routing, and 500-trial Monte Carlo disruption simulations.

Results demonstrate that incorporating mandatory crew-rest …

An Integrated Sensor-Fusion Framework For Performance-Based Compensation In Construction, Aly Ayman El-Ashry

Theses and Dissertations

Construction productivity has historically stagnated due to a reliance on subjective labor monitoring and “lagging” performance indicators. This research proposes a novel compensation model with the use of Total Energy Management System (TEMS) to translate labor effort and efficiency into payment incentives with the integration of Internet of Things (IoT) wearables and Statistical Process Control (SPC) charts.

This research addresses the systemic problem of declining construction productivity caused by industry’s inability to objectively quantify human effort. While traditional models rely on post-facto production tallies, a significant research gap exists in real-time physiological labor monitoring. To bridge this, the proposed TEMS …

The Impact Of Using Microencapsulated Phase Change Materials In Asphalt Binder And Mixtures, Ayyaz Fareed

Theses and Dissertations

Asphalt concrete is a widely used paving material for roadway construction; however, pavement distresses such as thermal cracking (non-load associated), fatigue cracking (load-associated), and rutting (permanent deformation) continue to challenge the performance and longevity of flexible pavements. These issues diminish ride quality, reduce service life, and contribute to increased maintenance needs. Several modifiers, including polymers and fibers, have been used to mitigate pavement deterioration, yet improving the thermal response of asphalt mixtures remains a significant concern, particularly in climates with substantial temperature fluctuations. Microencapsulated Phase Change Materials (MPCMs) have recently emerged as a promising solution due to their ability to …

Green Roofs For Grey Water Treatment – Comparative Study Of Economic And Environmental Impacts, Shaden S. Attia

Theses and Dissertations

Cities are under more pressure than ever to use sustainable methods for managing water and other resources because of urbanization, climate change, and a lack of water. Standard greywater treatment systems (SGTSs) work well, but they use a lot of resources and don't provide a lot of ecosystem services. Greywater-treating green roofs (GTGRs) have emerged as a promising Nature-Based Solution (NBS), combining wastewater recycling with benefits like regulating temperature, reducing greenhouse gas (GHG) emissions, and reducing the urban heat island (UHI) effect. Even with this potential, there is still not enough real-world research on how GTGRs affect both the economy …

Comparative Evaluation Of Conventional And Sustainable Concrete Protective Coatings: Performance, Economic, And Environmental, Andro Ebrahim

Theses and Dissertations

Concrete structures are highly susceptible to deterioration from environmental, chemical, and mechanical factors, making protective coatings essential for ensuring durability and reducing maintenance demands. This study aims to compare and evaluate conventional and innovative coating systems for concrete protection across three dimensions—technical performance, environmental sustainability, and life cycle cost efficiency—and to assess whether coatings often regarded or marketed as sustainable genuinely achieve sustainability across these three pillars. Four representative coatings were selected for assessment: epoxy solvent-based, epoxy solvent-free, acrylic water-based, and cementitious. Technical performance was examined through laboratory testing, expert interviews, and multiple real project cases, providing a comprehensive understanding …

Development Of A Novel Innovative Umbrella Falsework System For Concrete Slabs, Abdelazem Hashim

Theses and Dissertations

Formwork is one of the major elements that contribute to the cost and duration of concrete building projects. This is why optimizing such an element can lead to huge savings to all parties involved in the construction projects. With contractors facing huge challenges in such a competitive industry and employers seeking the least price and least duration for their projects, contractors are constantly under the obligations of finding the best alternatives to deliver their projects in terms of both time and money. Therefore, the main aim of this research project is to develop a falsework system, where the falsework system …

Sustainable Construction Materials In The Middle East: Model Development For Materials Selection, Taha Ahmed Omar Madu

Theses and Dissertations

The construction industry, a major driver of economic development in the Middle East, is simultaneously a leading contributor to carbon emissions, resource depletion, and environmental degradation. Amid rapid urbanization in countries such as Egypt, Saudi Arabia, and the United Arab Emirates, the adoption of sustainable construction materials has emerged as a critical strategy for mitigating environmental and societal impacts while advancing regional development objectives. This thesis is organized along two interrelated directions: first, it delivers a comprehensive assessment of the current adoption, challenges, and opportunities associated with the use of sustainable construction materials across the three target countries; second, it …

Proposed Modifications To The Egyptian Concrete Code Based On A Comprehensive Sustainability Assessment Of Portland Cement Alternatives For Climate Change Mitigation, Yasmin Elhakim

Theses and Dissertations

Climate change is a major challenge facing planet earth today. This phenomenon is foreseen to continue to represent a major concern for decades to come. The construction industry is one of the most polluting sectors worldwide and is considered one of the top greenhouse gas emitters. Egypt, in particular, is one of the most vulnerable countries to the adverse effects of climate change. The construction sector plays a major role in Egypt’s economy, contributing significantly to the national GDP, yet it also represents one of the country’s largest greenhouse gas emitters. However, the Egyptian Concrete Code does not enforce the …

Inspect: Intelligent Node-Based System For Ifc Processing And Evaluation, With Conversational Tool Support —Llmassisted Natural Language Ifc Querying, Basel Abdelshaheid

Theses and Dissertations

Industry Foundation Classes (IFC) enables the open exchange of Building Information Models, yet effective validation of real-world IFC deliveries remains challenging. Project models frequently contain incomplete, inconsistent, or incorrectly exported metadata, and explicit IFC relationships are often missing or degraded during conversion from proprietary formats. Many validation questions are inherently spatial, including connectivity, containment, proximity, and clashes, and therefore cannot be answered reliably from properties alone. As a result, federated model validation is often slow, fragmented across tools, and dependent on specialized IFC expertise.

This challenge is increasingly important for coordination, quality assurance, and information management across disciplines and lifecycle …

Nlp-Based Comparative Assessment Of Clauses Quantifying Risk Transfer In Construction Contracts, Hoda M. Elshamy

Theses and Dissertations

Employers in the construction industry mostly deviate from standard contract forms such as FIDIC and NEC, by introducing alterations to the contract conditions that shift a great portion of risks from the client to the contractor. Originally, these risks were distributed more equitably between all contracting parties in the standards forms. The imbalances in the contractual conditions create fertile ground for conflicts, and if not resolved, will escalate to disputes during the project execution phase, leading to significant cost overruns and time delays. The contractors, therefore, attempt to restore the original balance through making amendments to the communicated contract, through …

Utilization Of Plastic Waste In The Concrete Industry, Nancy Abdelmoneim Sakr

Theses and Dissertations

Plastic recycling has emerged as a crucial strategy that aligns with environmental, social and economic sustainability indicators. Currently, substantial volumes of plastic waste are either deposited in landfills or incinerated, neglecting the potential to harness its embodied energy and the energy consumed for producing virgin materials. A key advantage of plastic lies in its promising mechanical properties. Concrete mix design is fundamental to a wide range of construction applications, including brick walls, reinforced concrete slabs and concrete pavements. Despite the adoption of recycled plastic in construction materials in various countries, its widespread implementation remains limited. This is primarily due to …

Resilience By Design: A Multi-Metric Assessment Of Urban Vulnerability Across Human-Centric, Built, And Climatic Environment Dimensions, Karim Abdelhady

Theses and Dissertations

Urban resilience and sustainability have emerged as fundamental imperatives in contemporary urban planning, as cities face mounting pressures from climate change, population growth, and increasing socio-economic disparities. Resilient urban systems are not only those that withstand shocks, but also those that ensure the long-term well-being, equity, and functionality of their environments. As such, advancing the capacity to systematically evaluate resilience across spatial and temporal scales is critical to informing adaptive, forward-looking planning strategies. Despite a growing body of research on urban resilience, prevailing approaches remain limited in scope and resolution. Many studies tend to examine resilience through isolated lenses—focusing either …

Multifunctional Green Wall Systems For Greywater Treatment And Hygrothermal Regulation In Egypt, Laila Ossama Mohamed Elhusseiny Abdelsalam

Theses and Dissertations

Increasing environmental concerns regarding climate change and the intensifying challenge of water scarcity in Egypt necessitate the development of innovative, sustainable, and resource-efficient strategies for wastewater reuse. In the built environment, greywater constitutes a significant, relatively low-contaminant wastewater stream that, if treated to comply with Egyptian Codes and relevant international standards, can be safely reused for non-potable applications such as irrigation, landscaping, and building services. This research investigates the efficacy of an integrated green wall panel system, installed on building façades, for decentralized greywater treatment under Egypt’s climatic and environmental conditions, while simultaneously enhancing hygrothermal performance to reduce building energy …

Design Of Novel Formwork System And Development Of Numerical Model For Comparison Between Formwork Systems, Ahmed Yehia Abdel Aziz El Sayed

Theses and Dissertations

The formwork industry has witnessed major breakthroughs in the last decades. However, they required huge amount of materials leading to negative environmental impacts. Also, the commercially available systems have big number of accessories and requires the extensive use of units to cover the areas to be poured. There was an attempt to target all these disadvantages by introducing the Funicular Arched Steel Truss (FAST) system. However, this system had its own drawbacks, and this is why the researcher introduced an extendable version named the “Extendable Funicular Arched Steel Truss (EAST) system.”

To reach the final version of the EAST design, …

A Bim-Based Flexible Flow Shop Framework For Scheduling Linear Infrastructure Projects, Mahmoud Mohamed Elbassuony

Theses and Dissertations

Repetitive, multi-stage linear projects, such as pipelines or highways, are primarily impacted by spatial and resource constraints during their execution. Cost overruns, delays, and inefficient resource allocation make construction management for such projects complex. Traditional scheduling techniques, such as Critical Path Method (CPM) and Line of Balance (LOB), are less efficient for scheduling dynamic, complex, and multi-objective projects. There are more advanced scheduling methods that can be applied as a decision-making process to determine the optimal timing of activities and achieve other objectives. One of those techniques is the Flexible Flow Shop model (FFS), which can be effectively applied to …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Irrigation Efficiency In Green Wall Systems Utilizing Iot: Developing And Testing A Method To Optimize Water Use For Green Walls, Yomna Zaghloul

Theses and Dissertations

This study investigates the application of an Internet of Things (IoT)-based automated irrigation system for green walls in Cairo, Egypt, assessing its impact on water conservation, energy consumption, and plant health across a three-month experimental period. The research compared a sensor-controlled drip irrigation system utilizing the ESP8266 microcontroller and real-time environmental monitoring against conventional timer-based irrigation methods. Water usage data revealed that the IoT system consistently achieved substantial savings—averaging nearly 60% less water consumption than the control group—without compromising overall plant vitality. Energy efficiency was also improved, with automated cycles reducing pump operating time by more than 50%. Plant growth …

Towards Decarbonizing Concrete Industry In Egypt: Material Alternatives, And Economic Viability, Reem Gamal

Theses and Dissertations

The construction industry remains one of the largest contributors to global greenhouse gas emissions, with cement and steel production accounting for approximately 15% of total emissions. As global infrastructure demands continue to rise, there is an increasing need for practical tools that support low-carbon construction practices in line with international climate commitments. This research presents the development and testing of a mathematical, adaptable decision support system designed to assess both the environmental and financial impacts of material selection in concrete production. Focusing on life cycle stages A1 to A3, raw material extraction, transportation, and manufacturing, the decision support system enables …