Propulsion and Power Commons^™

Aeroacoustics Applications To Jets And Rotors, Michael Marques G.

Doctoral Dissertations and Master's Theses

Aeroacoustics plays a critical role in the advancement of propulsion technologies for both conventional and emerging aerial systems. This dissertation investigates two key topics: noise suppression in supersonic rectangular jets and rotor noise characterization in hover and ground effect. Using high-fidelity numerical simulations and theoretical analyses, this research aims to develop effective noise mitigation strategies and improve predictive methodologies.

The first part of this study focuses on the reduction of noise in supersonic rectangular jets through active control techniques. A novel approach utilizing unsteady microjet actuation at the nozzle lip is explored to disrupt the formation of large-scale turbulent structures …

Experimental Investigation Of Heat Transfer To Tightly Packed Cylinder Arrays, Cameron M. Sexsmith

Doctoral Dissertations and Master's Theses

With the increased emphasis on the development of hybrid electric aircraft and other electric driven vehicles, the thermal demand on batteries is increasing. Unique to the aviation sector is the combined need of high battery thermal loads and a light-weight thermal management system. A proposed configuration is an array of batteries directly cooled with a dielectric coolant. The knowledge of heat transfer characteristics of battery cooling is becoming an ever pressing issue due to the need to optimize volume and mass in a safe manner. Tighter spacings between batteries provide higher pack densities, however, at the cost of increased cooling …

Seal For A Wave Rotor Disk Engine, Christopher Tait, Pejman Abkari, Brian Sell, Marc D. Polanka

AFIT Patents

A unique seal for a wave rotor disk engine is disclosed herein. The seal is operable for sealing a region between a rotor and a rotor casing. The seal is spring loaded and will engage with the tip of the rotor to reduce pressure loss within the wave rotor disk engine.

Computational Study Of Detonation Wave Propagation And Propellant Injection In Detonation Engines, Jayson C. Small

Mechanical and Aerospace Engineering Dissertations - Archive

This research investigates the physics of detonation waves and their application to detonation engines, with two primary objectives: (1) to characterize detonation wave propagation, specifically detonation speed and wavefront thickness, in stoichiometric propane-oxygen mixtures near quenching conditions, and (2) to examine the physiochemical processes during propellant injection under detonation engine conditions, focusing on flush-wall-mounted, fluidic-valve injectors.

A multi-fidelity computational approach was employed. Reduced-order modeling based on the Chapman–Jouguet and Zeldovich–von Neumann–Doring models were used to evaluate detonation parameters and select an appropriate chemical mechanism. High-fidelity, multi-dimensional simulations solved the unsteady, compressible, reacting flows with finite-rate chemistry, using Reynolds-Averaged Navier–Stokes equations …

Electronic Propulsion Engines: Revolutionizing Space Travel, Isaiah Echeverria

Undergraduate Honors Theses

Most spacecrafts rely on chemical propulsion to generate thrust and venture into the depths of outer space. They rely on principles from Newton’s three laws of motion, conservation of momentum-energy, and atomic physics. However, an electronic form of propulsion also exists providing spacecrafts an alternative opposed to the sole use of chemical energy. Electronic propulsion systems or engines last longer than current chemical spacecraft engines and are improving to produce greater amount of thrusts.

Comparing the two types of spacecraft engines shows the benefits and disadvantaged obtained by using either option as well as the main differences and similarities shared …

Functional Visualizations Of A Hydrogen-Electric Aircraft Propulsion System For Supporting Pilot Decision-Making, Misha M. S. Schweitzer, Ece Üreten, Clark Borst, Olaf Stroosma, Rene Van Paassen

International Symposium on Aviation Psychology - 2025

Cognitive Work Analysis (CWA) and Ecological Interface Design (EID) were used todesign a novel flight deck display for a regional turboprop aircraft that is being retrofitted with aHydrogen Aircraft Powertrain Storage System (HAPSS). This research addresses the challengesof managing cognitive complexity in next-generation aviation systems, focusing on designinginterfaces based on system constraints which are modeled through the Abstraction Hierarchy(AH). Visualizations were discussed in interviews with subject matter experts highlighting theneed for further matching the mental model of the pilot by addressing simplicity, workload, anduse case representations on the display. The iterative process included static and dynamic displaytesting and focused on …

Hydrogen Standards And Aviation Sustainability, Eva Maleviti, Evan Stamoulis, Elen Paraschi

Publications

Standards from ISO, SAE, and ASTM are essential for certification, safety, and sustainability validation.

Hydrogen Readiness In Aviation & Challenges- Technology Meets Regulation And Market Demand, Eva Maleviti

Publications

Where technology meets regulation and market demand.

Simulation-To-Hardware Validation Of Mpc For Binary Thruster 2d Cubesat Control, Aevar Amundinusarson Oefjoerd

Theses and Dissertations--Mechanical and Aerospace Engineering

Small satellites must execute precise, fuel-limited maneuvers under strict actuation and operational constraints. Model Predictive Control (MPC) is a suitable approach because it optimizes future actions while explicitly enforcing these limits. This work evaluates (1) whether MPC can operate in real time using binary (on/off), asymmetric thrusters, and (2) whether a high-fidelity digital twin can be used to tune and validate the controller prior to hardware testing.

An MPC framework was implemented on a planar satellite prototype that floats on air bearings, operates at 16.7 Hz (60 ms period), and uses eight binary thrusters exhibiting up to 13.2% variation in …

Design Of An Active-Control Pressure Regulator For A Rocket, Seth Arkwright

Williams Honors College, Honors Research Projects

An electronically actuated pressure-regulation valve and controller are necessary for maintaining pressure levels in a pressure-fed liquid-fueled rocket engine. Mechanical regulators are too heavy and have unacceptably high-pressure variation throughout the operation of a dynamic system like a rocket. Developing an electronic pressure regulator using a PID controller is a method by which a reliable, accurate, and lightweight flow regulator can be built for use on a rocket vehicle. This work will outline the development of flow simulations, PID controller, physical valve hardware, and initial testing.

Characterization Of Krypton Performance In A Laboratory 300 W Magnetically Shielded Hall-Effect Thruster, Jacob Henry Knott

Dissertations, Master's Theses and Master's Reports

Xenon has long been the propellant of choice in Hall Thrusters; however, significant work has been performed to produce thrusters capable of utilizing alternate propellants due to xenon’s price and scarcity. Krypton is the most similar alternative propellant to xenon. This work examines the performance of a sub-kilowatt magnetically shielded Hall Thruster operating on both xenon and krypton. Krypton produced lower thrust, specific impulse, and was less efficient than xenon. Specifically, the absolute xenon-krypton efficiency gap was 6 to 24 % . Krypton’s inferior efficiency is primarily attributable to differences in mass utilization and beam divergence losses. The impacts of …

Numerical Modelling And Co-Optimization Of Gasoline Fuels For Gasoline Compression Ignition Using Multi Component Approach, Ashwin Karthik Purushothaman

Dissertations, Master's Theses and Master's Reports

Future mobility is expected to rely on a broad spectrum of powertrain technologies, including battery electric vehicles (BEVs), hybrid electric vehicles (HEVs), fuel cell electric vehicles (FCEVs) and traditional internal combustion engine (ICE) vehicles. Despite the shift toward electrification, internal combustion engines are projected to remain a key component of future powertrains, either as the primary power source or as range extenders to generate electricity in hybrid systems. As such, significant research efforts continue to focus on enhancing the efficiency and reducing the emissions of ICEs to meet increasingly stringent regulatory and environmental targets. Gasoline compression ignition (GCI) has been …

Methods Of Variability Reduction In Ramjet Fuel Injection Using Fluid-Structure Interactions, Egan J. Rigney

Honors Undergraduate Theses

The Liquid Jet in Crossflow (LJIC) method of fuel injection in ramjet engines is widely used and well-studied. However, they experience variation in their behavior at different altitudes and flight speeds due to the varied flow conditions following the inlet. This variation becomes more noticeable at high-temperature and high-speed airflow conditions. The optimized and consistent breakup of liquid fuel is a key component in ramjet engine design as there is a minimum surface area requirement of the droplets for combustion to occur. Local equivalence ratios also have a significant influence on the effectiveness of combustion. As such, researchers at the …

Novel Design And Fabrication Of A High-Speed Transient Heat Flux Sensor For Application To Rotating Detonation Engines, Zachary Todd Tallman

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rotating detonation engine (RDE) combustion systems have been a topic of interest in the pressure gain combustion community for their benefits over traditional gas turbine engine combustors. However, cooling requirements for these engines are significantly higher and less predictable than those of non-detonating engines. To understand and quantify the high-speed heat transfer dynamics within an RDE, a novel high-frequency heat flux sensor is presented. This study aims to design a robust, single-sided sensor that can withstand the high temperature and harsh environment of an RDE for extended durations. Screen printing is used to deposit a layered, platinum-yttria-stabilized zirconia (YSZ) film …

Optimizing Hypersonic Scramjets: A Numerical Study Of Fuel Type And Cavity Flameholder Design Impacts On Supersonic Combustion, Delaney Baumberger

Electronic Theses and Dissertations

This thesis presents recommendations for optimizing hypersonic scramjets via a numerical study focusing on fuel type and cavity flameholder design and the impacts they have on supersonic combustion. The research is divided into two main investigations aimed at improving scramjet engine efficiency using two distinct geometrical configurations, a square cavity engine and an axisymmetric cavity engine. Each configuration is examined under Mach 2 inflow conditions to assess the role of geometric variation and fuel selection on combustion stability, flameholding, and overall performance. The first study focuses on a comparative assessment of hydrogen and ethylene as scramjet fuels to evaluate their …

Hybrid Rans-Les Analysis Of Turbulent Flame Under Near Blow-Off Condition In A Multi-Stage Swirl Combustor, Brandon O'Brien

College of Graduate Studies: Theses & Dissertations

Advances in computational resources are making computational fluid dynamics (CFD) increasingly accessible for a variety of engineering applications. However, certain complex problems, such as simulating detailed flame kinetics, remain computationally prohibitive for many users. Developing cost-effective methods to simulate these challenges would greatly benefit applications involving flame dynamics, such as turbine engines or industrial burners. This study investigates the effect of main stage swirler intensity on near lean blow-off characteristics in a multi-staged swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model …

Flame Boundary Effects Of Hydrogen-Air Premixing, Alecson L. De Lima Junior

Honors Undergraduate Theses

The objective of this research was to investigate the reaction of hydrogen and heated air premixing when injected into a combusting ethylene-air crossflow, and to study the flame stabilization location with varying premixing levels. The main parameter of this investigation was the flame stabilization diagnosed through chemiluminescence, based on recorded equivalence ratio, temperature, and flame boundaries, and maintaining a constant air temperature, hydrogen and air mass flow, and momentum flux ratios. Testing was conducted at different ratios of hydrogen and air premixing achieved through alternating the distance between the point where hydrogen and air are mixed and the combusting crossflow. …

The Space Rescue Professional: Operationalizing Guardians For The Future, Benjamin Johnis, Robert Bettinger, James Dean

Faculty Publications

The escalating competition in space exploration demands a dedicated space rescue capability. This article argues for the establishment of a space rescue professional (SRP) career field within the Department of Defense and the US Space Force. By harnessing existing US Air Force combat rescue expertise and partnering with the National Aeronautics and Space Administration, the Space Force can rapidly develop a robust SRP program with the warrant officer corps as its backbone. This article addresses a critical gap in national space policy to outline a cost-effective dual-service training pipeline and SRP operational roles. Such an investment safeguards astronauts, bolsters US …

Assessing General Propulsion Architectures For Fast Transit Times To Mars For Crewed Missions, Vivek Bhatt

Doctoral Dissertations and Master's Theses

As NASA and commercial contractors, such as SpaceX, continue to develop their programs with Artemis and Starship, respectively, it is becoming more and more apparent that the program developments are ultimately for finding a way to put humans onto Mars. However, when we approach the current timeline of going to Mars, it usually involves a 6-9 month one way trip. Due to this, human spaceflight to Mars becomes more dangerous as exposure to affects such as solar radiation, long exposure to low gravity fields, and isolation. These are some of the many hazards that come with interplanetary space travel for …

2024 Summer-Fall Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for summer and fall 2024. Includes photographs, upcoming events, recent publications, and student profiles.

Design Of A Safe And Sustainable Airplane For Future, Henil Patel, Carlie Vogt, Matthew Talty, Jemimah Davies, Kyle Smothers, Mellisa Pritchet

Sustainability Conference

As a part of Airplane Preliminary Design course, this Design Note estimates the capabilities, performance, and stability behaviors of our conceptual airplane design, Boeing 7S7 – Sanctum prior to proceeding to the preliminary stage. This aircraft seeks to create a solution to achieving Net Zero Emissions by 2050 and increasing the safety measures. The design of this aircraft uses various analytical methods such as the DAPCA IV model, other methods were derived from design books. This design involved the use of software such as CATIA, VSP, SURFACES, Microsoft Excel, and Python. Results demonstrates that this aircraft is able to fly …

Unleaded Fuel For General Aviation, Carolina Anderson, Laura Garcia

Sustainability Conference

The Clean Air Act, passed in the late 1970s, mandating the removal of lead from most fuels due its detrimental effects on public health, yet piston-driven aircraft continue to rely on leaded aviation gas (AvGas 100LL). This fuel remains the last lead-containing fuel regulated by the Department of Transportation (DOT). Lead, added as tetraethyl lead (TEL), enhances octane levels and prevents engine detonation, vital for high-compression aircraft engines. In response to the health effects, regulating bodies like the Environmental Protection Agency (EPA) have tightened lead standards and are assessing the risk posed by AvGas. Research links even low-level lead exposure …

The Impact Of Film Cooling On The Heat Release Within A Rotating Detonation Combustor, Shreyas Ramanagar Sridhara, Antonio Andreini, Marc D. Polanka, Myles D. Bohon

Faculty Publications

Rotating detonation combustors establish a detonation wave that continuously circulates inside a small annulus. The presence of the detonation wave and the downstream oblique shock within the small annulus coupled with high mass flow induces a high heat load to the combustor wall. Preliminary analysis shows that for higher thermal power, internal air cooling alone is not sufficient to remove the heat out of the walls to maintain them below the maximum temperature of the metal. A possible solution is to use film cooling to reduce the heat flux to the combustor walls. One issue, though, is that the introduction …

Sunrise Propulsion Subsystem Leak Rate Measurement Methodology, Alex Kirkman, Brittany Woytko, Holly Walen, Bret Maughan

Space Dynamics Laboratory Publications

As part of the integration and testing for Sun Radio Interferometer Space Experiment (SunRISE), it was necessary to characterize the propellent leak rate of the fully assembled propulsion subsystem for each satellite to ensure compliance with performance requirements. SunRISE utilized a cold gas system for its propulsion subsystem, using R-236fa propellant inside a tank made from a monolithic 3D printed SLA material. It was not possible to accurately characterize the propellent leak rate via weight by measuring the mass loss from the tank. This is due to the SLA material having both a high absorbance rate of water in normal …

Spacecraft Attitude Control Simulator, Bricen S. Rigby

College of Engineering Summer Undergraduate Research Program

The Spacecraft Attitude Control Simulator is a single-axis attitude control platform which is intended to recreate the frictionless space environment in order to test cold-gas thruster control schemes. The overall goal of this research project was to observe settling data from the platform and compare it to simulated data. In practice, the predicted settling time was only 7% larger than observed settling time.

Cryogenic Fuel Applications To Sustainable Commercial Aircraft, Jack R. Kisling, Lillian Panning

College of Engineering Summer Undergraduate Research Program

Finding a source of clean and renewable energy is one of the greatest challenges humanity will face in the 21st century. With populations expanding, developing countries increasing their use of resources, and the rapid and alarming effects of climate change, a shift to a sustainable future is an existential prospect.

The goal of our project is to take the first steps toward getting safety procedures and lab space established, so mechanical engineering senior projects can quickly begin to experiment with cryogenic fuels. They will explore the application of cryogenic fuels to commercial aviation.

Computer Based Modeling For Small E-Vtol Propeller Performance, Ege Konuk

Mechanical & Aerospace Engineering Theses & Dissertations

The emerging field of urban air mobility (UAM) offers a novel transportation method for civil, commercial, and military applications. Vertical take-off and landing (VTOL) configurations present challenges for performance prediction during crucial flight operations. An advanced computational framework for predicting propeller performance in electric vertical takeoff and landing (eVTOL) aircraft during transition flight is essential for future concept designs. This research extends the Blade Element Momentum Theory (BEMT) to model propeller behavior at high incidence angles, crucial for eVTOL operation.

The study begins with a review of tilt-wing/rotor configurations for eVTOLs and tackles the complex aerodynamic phenomena associated with rotors …

Heat Transfer To Arrays Of Oscillating Impingement Jets, Alex Q. Clay

Doctoral Dissertations and Master's Theses

In gas turbine engines, the desire to increase turbine entry temperatures has become more relevant in order to increase engine efficiency. However, materials used in these engines can only withstand temperatures that are so high. Because of this, the ability to cool hot section components will always limit operating temperatures. Impingement cooling jets have become a common way of cooling due to the high rates of heat transfer that can be achieved. However, previous research has shown that the interaction of impingement jets with cylinder wake can improve the intensity and uniformity of heat transfer. The goal of this study …

Engine Performance Of An Electric Airplane With Partial Battery Capability, Hannah Yasmine Scrivens

Theses and Dissertations

As electric aircraft are developed and certified, knowledge of electric aircraft performance during complete or partial battery failures can be useful to determine an aircraft’s limitations and capabilities of completing an emergency landing, especially during takeoff and low-altitude climbs, as well as fully characterizing the potential aircraft performance. The results of this research will be useful in developing regulations and procedures pertaining to energy reserves and emergencies. This paper presents the results of a Pipistrel electric airplane climb power ground test that was conducted by the author and Florida Tech faculty. In the test, one of the airplane’s batteries was …

Disk Engine With Circumferential Swirl Radial Combustor, Brian T. Bohan, Marc D. Polanka, Bennett Staton

AFIT Patents

A disk engine and system configured to provide high power at a reduced axial length is disclosed herein. The disk engine includes a radial compressor, a compressor discharge manifold positioned circumferentially about compressor, a combustion chamber positioned within the discharge manifold and a radial turbine positioned radially inward of the combustion chamber.