Propulsion and Power Commons^™

Performance Measurements Of Direct Air Injection In A Cavity-Based Flameholder For A Supersonic Combustor, Scott G. Edens

Theses and Dissertations

For several years the Air Force Research Lab Propulsion Directorate has been studying the difficulties in fueling supersonic combustion ramjet engines with hydrocarbon based fuels. Recent investigations have focused on the use of direct air injection into a directly-fueled cavity-based flameholder. Direct air injection has been shown qualitatively to be a valuable tool for improving cavity combustion. Little quantitative data is available that characterizes the performance of cavity-based flameholders. The objective of this research was to quantitatively determine the specific advantages and disadvantages of the direct air injection scheme. This was accomplished via intrusive probing into a supersonic free stream …

A Prediction Code For The Thrust Performance Of Two-Dimensional, Non-Axisynnetric, Converging Diverging Nozzles, Angela M. Geatz

Theses and Dissertations

The objective of this research is to develop a prediction code for the Air Force Research Laboratory Propulsion Directorate that can accurately determine the gross thrust coefficient for a user defined nonaxisymmetric two-dimensional converging diverging nozzle. The code includes the effects of friction, angularity, and expansion losses on nozzle efficiency. To demonstrate the prediction method, the generated computational results were compared to experimental data, as well as computational results from other existing nozzle performance codes, for a number of different nozzle geometries. The nozzle internal performance prediction code showed excellent agreement with experimental data in predicting the gross thrust performance …

Characterization Of The Global Hawk Low Pressure Turbine First Rotor, Timothy L. Garmoe

Theses and Dissertations

The Air Force Research Laboratory, Propulsion Directorate at Wright Patterson Air Force Base has studied the performance of turbine blade geometries utilizing a large scale, low speed, drawdown wind tunnel in an effort to better understand gas turbine blade aerodynamics. Currently, the Air Force's Unmanned Aerial Vehicle (UAV) Global Hawk has been operated primarily at flight conditions other than the design point of its Allison AE3007H turbofan engine. This off design condition decreased the Reynolds number at the low pressure turbine causing losses in efficiency and loading. Two different blades were studied to maximize performance of the Global Hawk turbine. …

A Flash Vaporization System For Detonation Of Hydrocarbon Fuels In A Pulse Detonation Engine, Kelly C. Tucker

Theses and Dissertations

Current research by the US Air Force and Navy is concentrating on obtaining detonations in a pulse detonation engine (PDE) with low vapor pressure, kerosene based jet fuels. These fuels have a low vapor pressure and the performance of a liquid hydrocarbon fueled PDE is significantly hindered by the presence of fuel droplets. A high pressure, fuel flash vaporization system (FVS) has been designed and built to reduce and eliminate the time required to evaporate the fuel droplets. Four fuels are tested: n-heptane, isooctane, aviation gasoline, and JP-8. The fuels vary in volatility and octane number and present a clear …

Study Of Magnetogasdynamic Flow Acceleration In A Scramjet Nozzle, Erik K. Ross

Theses and Dissertations

The research project studied the benefits of Magnetogasdynamic (MGD) acceleration on a scramjet nozzle. MGD is a technology that relies on electromagnetic fields to extract and/or add energy to flow fields. The scramjet engine in the "AJAX" concept proposed by D.I. Brichkii et al. (2001) of St. Petersburg, Russia would utilize an MGD power generator in the diffuser user which could potentially provide electrical power for the aircraft support systems and an MGD accelerator in the nozzle of the engine. Using an AFRL/VAAC CFD code that was modified for MGD computations, this project investigated the effect conductivity and load factor …

Design Of A Prototype Model Aircraft Utilizing Propulsive Airfoil Technology, Richard L. Pepe

Renée Crown University Honors Thesis Projects - All

Researchers have considered the concept of a simple, compact aircraft for personal use for many years. To date, no effort has led to the development of a practical and affordable vehicle. The Computational Fluid Dynamics (CFD) Lab atSyracuseUniversity, however, has been researching a distributed propulsion technique, called propulsive airfoil technology, that has significant promise to meet the requirements for personal ownership of a small, hybrid road and air vehicle.

The propulsive airfoil concept is rooted in HVAC technology, utilizing a cross-flow fan (CFF) embedded into the trailing edge of a thick airfoil section, drawing in air from the top surface …

Robust Control Techniques For State Tracking In The Presence Of Variable Time Delays, Jarrett Goodell, Marc Compere, Miguel Simon, Wilford Smith, Ronnie Wright, Mark Brudnak

Publications

In this paper, a distributed driver-in-the-Ioop and hardware-in-the-Ioop simulator is described with a driver on a motion simulator at the U.S. Army TARDEC Ground Vehicle Simulation Laboratory (GVSL). Realistic power system response is achieved by linking the driver in the GVSL with a full-sized hybrid electric power system located 2,450 miles away at the TARDEC Power and Energy Systems Integration Laboratory (P&E SIL), which is developed and maintained by Science Applications International Corporation (SAIC). The goal is to close the loop between the GVSL and P&E SIL over the Internet to provide a realistic driving experience in addition to realistic …

An Existing Global Heptane Mechanism Augmented With Diffusive Transport, Michael R. Foster, Howard Pearlman

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

The couplings between diffusive transport and the temperature and species concentration distributions associated with low and intermediate temperature heptane oxidation are explored using an existing four-step heptane mechanism, tuned for elevated pressures. The energy and species concentration equations are augmented with diffusive fluxes for heat and species and solved numerically in a one-dimensional domain. The ignition delay times are also tabulated and compared with the zero-dimensional data reported in the literature.