Propulsion and Power Commons^™

Dynamic Thrust Testbed For Uav Electric Motors, Colin M. Flowers, Robert C. Johnson Jr., Carson P. Holt

Williams Honors College, Honors Research Projects

This project seeks to bring new testing capability to the Zips Aero Design Team through the design, manufacture, integration, and testing of a dynamic thrust testbed for UAV electric motors. The project centers upon the revival and modification of a past prototype aircraft for use as a testbed for in-flight thrust measuring and recording. The team currently lacks the ability to test dynamic thrust under the operating conditions and flight speeds that are encountered in competition. Project technical areas include component and product design, electrical and electronics, and fluid mechanics, including the use of SolidWorks, MATLAB, and ArduPilot. Aside from …

Uav To Carry Heavy Loads, Jacob Cannon, Robert Connor Downs, Anthony Orlando

Williams Honors College, Honors Research Projects

Our senior design project aims to develop an innovative Unmanned Aerial Vehicle (UAV) capable of carrying heavy payloads up to 50 lbs. This UAV will address the growing demand for efficient and autonomous cargo transportation, unlocking new possibilities in logistics and remote deliveries. The primary goal is to design, build, and test a robust UAV platform equipped with advanced propulsion systems, stabilizing mechanisms, and a secure payload attachment system. The heavy-lift UAV will be capable of transporting payloads in challenging environments, enhancing its versatility for various industries, including emergency response, disaster relief, and commercial logistics. For the extent of this …

Aerodynamic And Aeroacoustic Performance Of Small Uav Propellers In Static Conditions, William Jordan, Robert W. Deters, Shreyas Narsipur

Publications

The proliferation of small multi-rotor UAVs in commercial, recreational, and surveillance spheres has garnered significant interest in the noise produced by these vehicles. The current research aims to study the relationship between the aerodynamic performance and acoustic characteristics of small-scale UAV propellers. Three commercially available propellers for the DJI Phantom 2/3 UAV were selected for preliminary development and validation of an aeroacoustic experimental test setup and associated data reduction methods. Propeller thrust, torque, and power measurements were recorded at static conditions. Upon successful validation of the test bench, acoustic measurements were taken at the propeller disk’s upstream and in-plane locations. …

Performance Testing Of Aero-Naut Camfolding Propellers, Or D. Dantsker, Robert W. Deters, Marco Caccamo, Michael S. Selig

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. By examining a variety of …

Conceptual Design Of A South Pole Carrier Pigeon Uav, Kendrick M. Dlima

Master's Theses

Currently, the South Pole has a large data problem. It is estimated that 1.2 TB of data is being produced every day, but less than 500 GB of that data is being uploaded via aging satellites to researchers in other parts of the world. This requires those at the South Pole to analyze the data and carefully select the parts to send, possibly missing out on vital scientific information. The South Pole Carrier Pigeon will look to bridge this data gap.

The Carrier Pigeon will be a small unmanned aerial vehicle that will carry a 30 TB solid-state hard drive …

Active Fault-Tolerance Of The Unmanned Aerial Vehicle Automatic Control Systems, Vuong Anh Trung, Nguyen Van Thinh, Nguyen Duc Thanh, Nguyen Quang Vinh, Tran Thuan Hoang

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an introductory overview of principles of the three-layer hierarchy of active fault-tolerance, providing, determination of the fault type with as many details as enough to get recoverable fault reason and failure toleration by flexible redundancy using; the conception of active fault-tolerant control in abnormal modes is described. Developed models and methods of a systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the unmanned aerial vehicle (UAV) automatic control systems (ACS).

Prediction Of Noise Associated With An Isolated Uav Propeller, Samuel O. Afari

Doctoral Dissertations and Master's Theses

The emergent field of interest in the Urban Air Mobility community is geared towards a world where aerial vehicles are commonplace. This poses the problem of the effects of the radiated noise. The present research presents an in-depth analysis of the noise generation mechanism of a propeller as a mode of propulsion of the said aerial vehicles. Numerical simulation utilizing a Hybrid Large-Eddy Simulation (LES) coupled with Unsteady Reynolds-Averaged Navier-Stokes (RANS) solver, is adopted on an isolated propeller modeled from the commercial DJI Phantom II 9450 propeller. The Spalart-Allmaras one equation turbulence model with rotation/curvature correction is used. The Farassat’s …

Propulsion System Testing For A Long-Endurance Solar-Powered Unmanned Aircraft, D. Dantsker, Robert Deters, Marco Caccamo

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. In order to determine the …

Experiments Of Propeller-Induced Flow Effects On A Low-Reynolds-Number Wing, Gavin K. Ananda, Robert Deters, Michael S. Selig

Publications

Novel findings are discussed in this paper that will be especially beneficial to designers and modelers of small-scale unmanned air vehicles and high-altitude long-endurance vehicles that both operate at low Reynolds numbers (Re = 50,000-300,000). Propeller-induced Oow effects in both tractor and pusher configurations on a recta ngular wing using the Wortmann FX 63-137 airfoil (a common low-Reynolds-number high-lift airfoil) are presented in this paper . Significant performance benefits can be found for a wing in the tractor configuration. Experiments, including trip tests and upper-surface oil Dow visualization, show and verify that the propeller slipstream induces early transition to turbulent …

Unmanned Aerial Systems: Research, Development, Education & Training At Embry-Riddle Aeronautical University, Michael P. Hickey

Publications

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks.

Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Unmanned Aerial Vehicle (Uav) Propulsion Research: Conceptual Studies Of “Ultra-Compact Shaft-Less Jet Engines” For Next Generation Uavs, Tyler Eiguren, Trevor Douglas, Tre Buchanan

Publications

Unmanned Aerial Vehicles are becoming more commonly used in today’s society, ranging anywhere from military applications to entertainment for enthusiasts and hobbyists. The complexity of current generation UAV’s propulsive devices, based upon a scaled turbine engine and separate gas & electrically powered rotating fan blades, require regular maintenance for every 24 hours of flight. This added cost coupled with necessary intricate machinery deters UAV designers from such engines, leaving a void in current production. Our research team believes that by combining a simplified alternative compression & combustion process with an electrically driven fan, we can develop an energy efficient, reliable, …

Design Methods For Remotely Powered Unmanned Aerial Vehicles, William Beaman Howe

Master's Theses

A method for sizing remotely powered unmanned aerial vehicles is presented to augment the conventional design process. This method allows for unconventionally powered aircraft to become options in trade studies during the initial design phase. A design matrix is created that shows where, and if, a remotely powered vehicle fits within the design space. For given range and power requirements, the design matrix uses historical data to determine whether an internal combustion or electrical system would be most appropriate. Trends in the historical data show that the break in the design space between the two systems is around 30 miles …

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

Wind Tunnel Modeling Of Small Electric Uav Power System Performance, Nathan R. Phelps

Aerospace Engineering

This report details the design and construction of a testing apparatus for characterization of small electric aircraft power systems designed for use in the California Polytechnic State University San Luis Obispo Aerospace Engineering department’s subsonic wind tunnel. This apparatus was constructed and implemented with the goal of determining system and component efficiencies of an entire power system using RC Aircraft components as an analog for systems currently in use in the current generation of small electric UAV’s in service with the US Armed Forces. The goal of these experiments was to determine where improvements in the system architecture can be …

Unmanned Aircraft System Propulsion Systems Technology Survey, Christopher Griffis, Timothy Wilson, Jeffrey Schneider, Peter Pierpont

Publications

This technology survey is an investigation of various propulsion systems used in Unmanned Aircraft Systems (UAS). Discussed are existing and near-future propulsion mechanisms of UAS, such as reciprocating piston engines, Wankel rotary engines, gas turbine engines, rocket-powered systems, electric motors, and battery-based systems. Also discussed are systems that use proton exchange membrane fuel cells, photovoltaics, ultracapacitors, and propellers. Each system is described in reference to a larger conceptual framework, with instances and profiles of existing UAS employing the system being described. Advantages and disadvantages of each type of propulsion system are identified along with associated technical issues and their respective …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …