Aerodynamics and Fluid Mechanics Commons^™

A Performance And Visualization Study On Inlet Geometries Of A Cross-Flow Fan., Yoel Tanquero

Electronic Theses and Dissertations

A study was conducted to characterize the flow-field in the suction region of different inlet geometries of a cross-flow fan. The characterization was accomplished by correlating the static performance curves measured for each fan-inlet configuration to the streamline plot obtained using a particle tracking velocimetry (PTV) measurement system at three constant flow rates (25, 40, and 55 CFM). The PTV measurement system used was developed by the author and uses helium bubbles as tracers, an LED light sheet, a slow motion camera, and a Matlab program. Four inlet geometry design variables were defined and independently studied to evaluate the effect …

Actuator Disk Theory For Compressible Flow, Htet Htet Nwe Oo

Master's Theses

Because compressibility effects arise in real applications of propellers and turbines, the Actuator Disk Theory or Froude’s Momentum Theory was established for compressible, subsonic flow using the three laws of conservation and isentropic thermodynamics. The compressible Actuator Disk Theory was established for the unducted (bare) and ducted cases in which the disk was treated as the only assembly within the flow stream in the bare case and enclosed by a duct having a constant cross-sectional area equal to the disk area in the ducted case. The primary motivation of the current thesis was to predict the ideal performance of a …

Investigation Of Dynamic Store Separation Out Of A Weapons Bay Cavity Utilizing A Low Speed Wind Tunnel, Andrew D. Bower

Theses and Dissertations

Characterizing mission store trajectories as they separate from a weapons bay cavity is highly relevant to the Air Force mission. The flow around a weapons bay is unsteady. The unsteady flow can cause a mission store separation trajectory to be unpredictable, and such is the case for what some have termed a pitch bifurcation. Traditional wind tunnel testing is incapable of detecting a bifurcation because traditional wind tunnel testing records time-averaged data. In this study, an experimental testing system was developed and refined in order to support the time-accurate characterization of dynamic mission store separation events. A Motion Test Apparatus …

Time-Dependent Validation Of Finite Element Strain Distribution Of A Plastically-Deformed Plate Via Digital Image Correlation, Kevin R. Knapp

Theses and Dissertations

Generation of residual stress is an essential step in the generation of Goodman data via Air Force Research Laboratory's vibration-based fatigue test. Conventional Goodman data is constructed through uniaxial fatigue testing at a rate of 40 Hz, while the vibration-based testing excites stresses at 1,600 Hz in a stress state that is similar to those seen in gas turbine engine airfoils. A pre-strain procedure is conducted to form residual tensile stress, which serves as a steady stress when the specimen is subjected to fully-reversed vibration-based fatigue loads. This steady tensile stress is desired at the fatigue zone of the test …

In-House Fabrication Of Temperature Sensitive Paint For Turbine Cooling Research, Mayur D. Patel, Mark A. Ricklick

Beyond: Undergraduate Research Journal

The Temperature Sensitive Paint (TSP) is a widely used method in measuring and visualizing flow separation and heat transfer. Compared to the cost and time consumption needed for methods such as pitot tubes, temperature sensitive paint is a cheaper alternative. Due to high usage in College of Engineering research projects, it was determined that in house fabrication of temperature sensitive paint would reduce time and cost limitations. For initial stages, literature research was performed to determine the recipe of intensity based TSP with luminophore and polymer binder that operated optimum at temperatures from 0-100°C. Europium III thenoyltrifluoroacetonate was determined to …

An Archival Analysis Of Stall Warning System Effectiveness During Airborne Icing Encounters, John Michael Maris

Doctoral Dissertations and Master's Theses

An archival study was conducted to determine the influence of stall warning system performance on aircrew decision-making outcomes during airborne icing encounters. A Conservative Icing Response Bias (CIRB) model was developed to explain the historical variability in aircrew performance in the face of airframe icing. The model combined Bayes’ Theorem with Signal Detection Theory (SDT) concepts to yield testable predictions that were evaluated using a Binary Logistic Regression (BLR) multivariate technique applied to two archives: the NASA Aviation Safety Reporting System (ASRS) incident database, and the National Transportation Safety Board (NTSB) accident databases, both covering the period January 1, 1988 …

Rans Simulations Of Aerodynamic Performance Of Naca 0015 Flapped Airfoil, Sohaib Obeid, Ratneshwar Jha, Goodarz Ahmadi

Henry M. Rowan College of Engineering Departmental Research

An analysis of 2D subsonic flow over an NACA 0015 airfoil with a 30% trailing edge flap at a constant Reynolds number of 106 for various incidence angles and a range of flap deflections is presented. The steady-state governing equations of continuity and momentum conservation are solved combined with the realizable k-ε turbulence model using the ANSYS-Fluent code (Version 13.7, ANSYS, Inc., Canonsburg, PA, USA). The primary objective of the study is to provide a comprehensive understanding of flow characteristics around the NACA 0015 airfoil as a function of the angle of attack and flap deflection at Re = 106 …

Multi-Stage Axial Compressor With Counter-Rotation, Vinod Gehlot, Magdy S. Attia, Divyam Garg

Publications

A multi-stage axial compressor incorporating a counter-rotational movement is provided with a series of rotors mounted along and driven by a driveshaft, and a geared counter-rotating outer casing. A planetary gear system is assembled along a static casing, which can be assembled as a forward or aft casing for the compressor. The bearings of the planetary gear system typically will be aligned concentrically with a center rotor drum assembly mounted along the single driveshaft. The counter-rotating drum assembly will be assembled over the rotor drum assembly and will be engaged by the forward and aft casings so as to provide …

Characteristics Of Hydrogel-Wetted Thin Films, James Owens

Electronic Theses and Dissertations

The meniscus region of a thin film is known to have high heat transfer properties due to high evaporation rates and activation of latent heat. The region known as the thin film meniscus (δfilm lt& 2 µm ) can account for more than half of the total heat transfer of a droplet or film. This study focuses on the potential elongation and curvature amplification of the thin film meniscus region by the implementation of a layer of high hydrogen bonding (hydrogel) film on which the liquid meniscus is built. Forced wetting via liquid propagation though this hydrogel layer in the …

Mid-Infrared Absorption Spectrometer For Multi-Species Detection Using Leds For Space Applications: Development And Flight Testing, Michael Villar

Electronic Theses and Dissertations

As commercial space travel expands, the need for specialized instrumentation to ensure the safety of crew and cargo becomes increasingly necessary. Both the Federal Aviation Administration (FAA) and pioneers in the space tourism industry have expressed an interest in a robust, low cost, and low power consumption sensor to measure atmospheric composition aboard spacecraft. To achieve this goal a time-resolved NDIR absorption sensor that measures transient levels of gaseous carbon dioxide (CO2) and carbon monoxide (CO) was developed. The developed sensor has a wide range of applications applicable to the growing needs of industry, from monitoring CO and CO2 levels …

Development Of A Flapping Wing Test Stand, Darnisha Crane

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Data-Driven Adaptive Reynolds-Averaged Navier-Stokes K - Ω Models For Turbulent Flow-Field Simulations, Zhiyong Li

Theses and Dissertations--Mechanical and Aerospace Engineering

The data-driven adaptive algorithms are explored as a means of increasing the accuracy of Reynolds-averaged turbulence models. This dissertation presents two new data-driven adaptive computational models for simulating turbulent flow, where partial-but-incomplete measurement data is available. These models automatically adjust (i.e., adapts) the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k-ω turbulence equations to improve agreement between the simulated flow and a set of prescribed measurement data.

The first approach is the data-driven adaptive RANS k-ω (D-DARK) model. It is validated with three canonical flow geometries: pipe flow, the backward-facing step, and flow around an airfoil. For all 3 test …

Modeling Of Flow Generated Sound In A Constricted Duct At Low Mach Number Flow, Peshala Thibbotuwawa Gamage

Electronic Theses and Dissertations

Modelling flow and acoustics in a constricted duct at low Mach numbers is important for investigating many physiological phenomena such as phonation, generation of arterial murmurs, and pulmonary conditions involving airway obstruction. The objective of this study is to validate computational fluid dynamics (CFD) and computational aero-acoustics (CAA) simulations in a constricted tube at low Mach numbers. Different turbulence models were employed to simulate the flow field. Models included Reynolds Average Navier-Stokes (RANS), Detached eddy simulation (DES) and Large eddy simulation (LES). The models were validated by comparing study results with laser doppler anemometry (LDA) velocity measurements. The comparison showed …

Summary Of "Supersonic Jet And Rocket Noise", Kent L. Gee, Caroline P. Lubert, Alan T. Wall, Seiji Tsutsumi

Department of Mathematics and Statistics - Faculty Scholarship

This paper summarizes a two-part special session, “Supersonic Jet and Rocket Noise,” which was held during the 174th Meeting of the Acoustical Society of America in New Orleans, Louisiana. The sessions were cosponsored by the Noise and Physical Acoustics Technical Committees and consisted of talks by government, academic, and industry researchers from institutions in the United States, Japan, France, and India. The sessions described analytical, computational, and experimental approaches to both fundamental and applied problems on model and full-scale jets and rocket exhaust plumes.

A Flexible Physics-Based Lifing Method For Metals Under Creep And Thermomechanical Fatigue, Firat Irmak

Electronic Theses and Dissertations

This thesis focuses on the development of a flexible, physics-based life prediction approach for steels under complex conditions. Low alloy steels continue to be the materials of choice for large turbomachinery structures experiencing high temperatures for long durations. There has been significant advancement in the research of modern alloys; furthermore, these materials are continue to be utilized in boilers, heat exchanger tubes, and throttle valve bodies in both turbomachinery and pressure-vessel/piping applications. The material 2.25Cr-1Mo is studied in the present work. The resistance of this alloy to deformation and damage under creep and/or fatigue at elevated temperatures make it appropriate …

Combustion Of 1,3-Butadiene Behind Reflected Shocks, Joseph Lopez

Electronic Theses and Dissertations

The chemical kinetics of 1,3-butadiene (1,3-C4H6) are important because 1,3-butadiene is a major intermediate during the combustion of real fuels. However, there is only limited information on the chemical kinetics of 1,3-butadiene combustion, which has applications in several combustion schemes that are currently being developed, including spark-assisted homogeneous charge compression ignition and fuel reformate exhaust gas recirculation. In the present work, the ignition delay times of 1,3-butadiene mixtures has been investigated using pressure data. Oxidation of 1,3-butadiene/oxygen mixtures diluted in argon or nitrogen at equivalence ratios (Φ) of 0.3 behind reflected shock waves has been studied at temperatures ranging from …

Simultaneous Imaging Of The Diatomic Carbon And Methylidyne Species Radicals For The Quantification Of The Fuel To Air Ratio From Low To High Pressure Combustion, Jonathan Reyes

Electronic Theses and Dissertations

The radical intensity ratio of the diatomic carbon to methylidyne was characterized at initial pressures up to 10 bar using certified gasoline of 93% octane. This gasoline was selected due to its availability as a common fuel. The characterization of the radical intensity ratio of gasoline at elevated pressures enabled the creation of a calibration map of the equivalence ratio at engine relevant conditions. The proposed calibration map acts as a feedback loop for a combustor. It allows for the location of local rich and lean zones. The local information acquired can be used as an optimization parameter for injection …

Study Of Experimentally Blended Wings, Ray Roos 2894888

Williams Honors College, Honors Research Projects

This aim of this senior design project is to investigate the combination of a Selig 1223 and FX 74-CL5-140 into one profile to increase lift without significantly increasing drag. Our project began with researching current solutions for high lift and low drag airfoils. We found two airfoils which would be the target of our research, a Selig 1223 and the FX 74-CL5-140. After learning about the Cl and Cd of the current airfoils we built and physically tested the airfoils using additive manufacturing. A pressure differential tunnel was used to validate the airfoils. After researching how to blend two airfoil …

Design And Modeling Of A Heat Exchanger For Porous Combustor Powered Steam Generators In Automotive Industry, Apratim Dasgupta

Electronic Theses and Dissertations

A major challenge faced by automobile manufacturers is to achieve reduction of particulate emission to acceptable standards, as the emission standards become more and more stringent. One of the ecologically friendly options to reduce emissions is to develop external combustion in a steam engine as a replacement of the internal combustion engine. There are multiple factors, other than pollution that need to be considered for developing a substitute for Internal Combustion Engine, like specific power, throttle response, torque speed curve, fuel consumption and refueling infrastructure. External combustion in a steam engine seems to be a bright idea, for a cleaner …

Implementation Of Optical Interferometry And Spectral Reflectometry For High Fidelity Thin Film Measurements, Armando Arends-Rodriguez

Electronic Theses and Dissertations

An in-house reflectometer/interferometer has been built to investigate the varying curvature and thickness profiles in the contact line region of air, acetone, iso-octane, ethanol, and water on various types of substrates. Light intensity measurements were obtained using our reflectometer/interferomter and then analyzed in MATLAB to produce thickness and curvature profiles. The apparatus is based on the principle of a reflectometer, consisting of different optical elements, probe, light source, and spectrometer. Our reflectometer/interferomter takes measurements in the UV-Vis-IR range (200nm-1000nm). This range is achieved by using a light source that has both a deuterium light (190nm-800nm), a tungsten halogen light (400nm-1100nm), …

Local Field Effects On Magnetic Suppression Of The Converging Richtmyer-Meshkov Instability, Vincent Wheatley, Wouter Mostert, D. M. Bond, Ravi Samtaney

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We examine how the suppression of the converging shockdriven Richtmyer-Meshkov instability by an applied magnetic field is dependent on the local magnetic field strength and orientation. In particular, we examine whether the extent of suppression can be reasonably predicted by a linear model for the planar case. This is done for cylindrically converging cases with a high perturbation wavenumber and two different initial magnetic field configurations.

Computational Fluid Dynamics Is Key To Better Flying Aircraft, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Effect Of Slot Span On Wing Performance, Juan F. Granizo

Doctoral Dissertations and Master's Theses

This report presents new numerically-derived correlations to estimate the aerodynamic properties of a three-dimensional wing that features a partial to full span fixed slot. Fixed slots have been thoroughly studied in the past with regards to their operation and the relation between slot geometry and wing performance. There have also been many studies on the advantages and disadvantages of tip-slotted wings and the comparison between these and full-slotted wings. Up to this point however, a study on the effects of slot span on wing performance has not been performed. Effect of slot span on wing performance is evaluated in an …

Effect Of Flow-Acoustic Resonant Interactions On Aerodynamic Response Of Transitional Airfoils, Joseph Hayden

Doctoral Dissertations and Master's Theses

A high-accuracy numerical study is conducted to examine the impact of flow-acoustic resonant interactions on the aerodynamic response of symmetric and cambered airfoils in the realistic transitional flow regimes with Rec=140,000 and M=0.0465 as well as the low Reynolds number flow regime with Rec=10,000 and M=0.2. The symmetric NACA-0012 and the cambered SD7003 airfoils are investigated at various angles of attack that have been found previously to include both the tone and no-tone producing regimes, with specific focus on the aerodynamic lift response. Additional simulations are conducted with a low-intensity synthetic turbulence introduced upstream of the airfoils in order to …

Turbulence Control In Wall Jets, Jonathan Latim

Doctoral Dissertations and Master's Theses

The turbulent boundary layer has been the focus of many studies over the last century or so due to its engineering significance. Recent studies have shown that the turbulent boundary layer encapsulates extremely energetic large-scale structures which play a much more significant role in its dynamics than has been previously thought. Further, these large scales amplitude and frequency modulate the finer scales of turbulence. This offers a path to control wall turbulence by controlling the large-scales of the flow. The focus of this thesis is to establish ways to manipulate the energy of the large-scale structures in a model turbulent …

Assessment Of Asymmetric Flight On Solar Uas, Eric Belfield

Master's Theses

An investigation was conducted into the feasibility of using an unconventional flight technique, asymmetric flight, to improve overall efficiency of solar aircraft. In this study, asymmetric flight is defined as steady level flight in a non-wings-level state in- tended to improve solar incidence angle. By manipulating aircraft orientation through roll angle, solar energy collection is improved but aerodynamic efficiency is worsened due to the introduction of additional trim drag. A point performance model was devel- oped to investigate the trade-off between improvement in solar energy collection and additional drag associated with asymmetric flight. A mission model with a focus on …

Determination Of Aqueous Surfactant Solution Surface Tensions With A Surface Tensiometer, Remelisa Esteves, Birce Dikici Ph.D, Matthew Lehman, Qayyum Mazumder, Nonso Onukwuba

Beyond: Undergraduate Research Journal

Surfactant solutions are applicable to engineering systems for cooling equipment for electronics. Surfactants can be added to water to improve heat transfer. An application of using aqueous surfactant solutions can be through microchannel heat sink. Although it is ideal to redesign these systems to reduce heat, it is a costly method. Surfactant solutions at optimal solution concentration can be able to transfer heat quickly and effectively with minimum expense. The surface tension of surfactant solutions is an important parameter for boiling heat transfer and must be taken into consideration. The purpose of this research is to measure surface tension of …

Determination Of Surfactant Solution Viscosities With A Rotational Viscometer, Remelisa Esteves, Nonso Onukwuba, Birce Dikici Ph.D

Beyond: Undergraduate Research Journal

Aqueous surfactant solutions are used in engineering systems for improving boiling heat transfer. The purpose of this research is to determine the viscosities of surfactant solutions and to investigate the effect of composition on viscosity. The results obtained can possibly be used as reference for further study in the effects of surfactant solution viscosities on nucleate boiling. A rotational viscometer was used to determine the viscosities of three surfactant solutions – SLS, EH-14, and SA-9 – of various compositions at room temperature. It was discovered that the viscosities of SLS, EH-14, and SA-9 had a nearly consistent pattern as their …

Brakes, Thrust Reversers, Beta Props, Spoilers And Life Dumps All Help In Deceleration Of Jets And Turboprops, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

A Computer Program For The Coupled Implementation Of Meanline And Throughflow Methods To Simplify The Aerodynamic Design Of Multistage Axial Compressors, Alexander V. Rozendaal

Doctoral Dissertations and Master's Theses

A computer program capable of simplifying the preliminary aerodynamic design process of multistage axial compressors has been developed. This interactive design tool, named C-STAAC, combines the Meanline and Throughflow analysis capabilities of two independent compressor design codes to form one standalone system. The program greatly improves the efficiency of the Preliminary-to-Throughflow stages of compressor design by providing fully coupled interaction between the two platforms. The result enables the user to produce stacked airfoil geometry from only a handful of initial input parameters.

The program additionally offers a wide selection of pre- and post-processing capabilities that were not previously available with …