Aerodynamics and Fluid Mechanics Commons^™

Computational Fluid Dynamics Analysis Of Inverted, Multi-Element Airfoils In Ground Effect, Michael Grabis, Ramesh K. Agarwal

McKelvey School of Engineering Graduate Student Theses & Dissertations

Formula SAE cars are formula-styled race cars designed to race on an autocross circuit. The autocross circuit is mostly comprised of turning sections as well as a limited amount of straight sections for passing other cars. Highly competitive cars in the competition implement aerodynamic devices to generate negative lift for the race car. This negative lift, or downforce, increases the amount of traction between the race car’s tires and the ground ultimately allowing the drivers to turn at faster speeds. Commonly used aerodynamic devices are a front and rear wing; the wing cross sections are defined by configurations of multiple …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 2. Comparison Of Theory And Dns, Sarma L. Rani, Rohit Dhariwal, Donald L. Koch

PRC-Affiliated Research

Part 1 (Rani et al. J. Fluid Mech. , vol. 871, 2019, pp. 450–476) of this study presented a stochastic theory for the clustering of monodisperse, rapidly settling, low-Stokes-number particle pairs in homogeneous isotropic turbulence. The theory involved the development of closure approximations for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions $\boldsymbol{r}$ . In this part 2 paper, the theory is quantitatively analysed by comparing its predictions of particle clustering with data from direct numerical simulations (DNS) of isotropic turbulence containing particles settling under gravity. The simulations were performed at …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 1. Drift And Diffusion Flux Closures, Sarma L. Rani, Vijay K. Gupta, Donald L. Koch

PRC-Affiliated Research

In this two-part study, we present the development and analysis of a stochastic theory for characterizing the relative positions of monodisperse, low-inertia particle pairs that are settling rapidly in homogeneous isotropic turbulence. In the limits of small Stokes number and Froude number such that , closures are developed for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions. The theory focuses on the relative motion of particle pairs in the dissipation regime of turbulence, i.e. for pair separations smaller than the Kolmogorov length scale. In this regime, the theory approximates the fluid …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 1. Drift And Diffusion Flux Closures, Sarma L. Rani, Vijay K. Gupta, Donald L. Koch

PRC-Affiliated Research

In this two-part study, we present the development and analysis of a stochastic theory for characterizing the relative positions of monodisperse, low-inertia particle pairs that are settling rapidly in homogeneous isotropic turbulence. In the limits of small Stokes number and Froude number such that , closures are developed for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions. The theory focuses on the relative motion of particle pairs in the dissipation regime of turbulence, i.e. for pair separations smaller than the Kolmogorov length scale. In this regime, the theory approximates the fluid …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 2. Comparison Of Theory And Dns, Sarma L. Rani, Rohit Dhariwal, Donald L. Koch

PRC-Affiliated Research

Part 1 (Rani et al. J. Fluid Mech. , vol. 871, 2019, pp. 450–476) of this study presented a stochastic theory for the clustering of monodisperse, rapidly settling, low-Stokes-number particle pairs in homogeneous isotropic turbulence. The theory involved the development of closure approximations for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions $\boldsymbol{r}$ . In this part 2 paper, the theory is quantitatively analysed by comparing its predictions of particle clustering with data from direct numerical simulations (DNS) of isotropic turbulence containing particles settling under gravity. The simulations were performed at …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 1. Drift And Diffusion Flux Closures, Sarma L. Rani, Vijay K. Gupta, Donald L. Koch

PRC-Affiliated Research

In this two-part study, we present the development and analysis of a stochastic theory for characterizing the relative positions of monodisperse, low-inertia particle pairs that are settling rapidly in homogeneous isotropic turbulence. In the limits of small Stokes number and Froude number such that , closures are developed for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions. The theory focuses on the relative motion of particle pairs in the dissipation regime of turbulence, i.e. for pair separations smaller than the Kolmogorov length scale. In this regime, the theory approximates the fluid …

Clustering Of Rapidly Settling, Low-Inertia Particle Pairs In Isotropic Turbulence. Part 2. Comparison Of Theory And Dns, Sarma L. Rani, Rohit Dhariwal, Donald L. Koch

PRC-Affiliated Research

Part 1 (Rani et al. J. Fluid Mech. , vol. 871, 2019, pp. 450–476) of this study presented a stochastic theory for the clustering of monodisperse, rapidly settling, low-Stokes-number particle pairs in homogeneous isotropic turbulence. The theory involved the development of closure approximations for the drift and diffusion fluxes in the probability density function (p.d.f.) equation for the pair relative positions $\boldsymbol{r}$ . In this part 2 paper, the theory is quantitatively analysed by comparing its predictions of particle clustering with data from direct numerical simulations (DNS) of isotropic turbulence containing particles settling under gravity. The simulations were performed at …

First Approach To Coupling Of Numerical Lifting-Line Theory And Linear Covariance Analysis For Uav State Uncertainty Propagation, Cory D. Goates, Randall S. Christensen, Robert C. Leishman

Faculty Publications

Numerical lifting-line is a computationally efficient method for calculating aerodynamic forces and moments on aircraft. However, its potential has yet to be tapped for use in guidance, navigation, and control (GN&C). Linear covariance analysis is becoming a popular GN&C design tool and shows promise for pairing with numerical lifting-line. Pairing numerical lifting-line with linear covariance analysis allows for forward propagation of state uncertainty for real-time decision making. We demonstrate this for select state variables in a drone aerial recapture situation. Linear covariance analysis uses finite difference derivatives obtained from numerical lifting-line to calculate force and moment variances. These show agreement …

A Homegrown Dsmc-Pic Model For Electric Propulsion, Dominic Charles Lunde

Master's Theses

Powering spacecraft with electric propulsion is becoming more common, especially in CubeSat-class satellites. On account of the risk of spacecraft interactions, it is important to have robust analysis and modeling tools of electric propulsion engines, particularly of the plasma plume. The Navier-Stokes equations used in classic continuum computational fluid dynamics do not apply to the rarefied plasma, and therefore another method must be used to model the flow. A good solution is to use the DSMC method, which uses a combination of particle modeling and statistical methods for modeling the simulated molecules. A DSMC simulation known as SINATRA has been …

An Afternoon With General Thomas P. Stafford, Stafford Air & Space Museum

Programs

An Afternoon with General Thomas P. Stafford

Sunday, May 19th, 2019 at 2:00 P.M. at the Weatherford High School Performing Arts Center.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Apollo 10, 50th Anniversary Gala, Stafford Air & Space Museum

Programs

The Apollo 10 50th Anniversary Gala was held on May 18th, 2019 at the Stafford Air & Space Museum in Weatherford, Oklahoma.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Computation Of Flow Fields Due To Single- And Twin-Jet Impingement, Xiang Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

The thesis consists of two parts. The first part focuses on numerical simulations and their comparison with experimental data for single-jet impingement on ground. Angles between the axisymmetric jet and impingement surface considered are 15, 30 and 90 degree. It is shown that both the k-epsilon and Wray-Agarwal (WA) model can predict the flow fields in good agreement with the experimental results. The second part extends the first part to twin-jet normal impingement on the ground. It focuses on numerical simulation of fountains formed by the twin-jet impingement. The fountains can be normal straight upward when the two jets are …

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Undergraduate Theses and Capstone Projects

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats and an increasing popularity of self-driving cars. We simulated the motion of an autonomous vehicle using computational models. The simulation models the motion of a small-scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as various biases …

Development Of A One-Equation Turbulence Model Based On K-Ε Closure And Its Extension For Computing Transitional Flows By Including An Intermittency Transport Equation, Cheng Peng

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Experimental And Computational Analysis Of A 3d Printed Wing Structure, Aryslan Malik

Doctoral Dissertations and Master's Theses

Correct prediction of aeroelastic response is a crucial part in designing flutter or divergence free aircrafts within a designated flight envelope. The aeroelastic analysis includes specifically tailoring the design in order to prevent flutter (passive control) or eliminate it by applying input on control surfaces (active control). High-fidelity models such as coupled Computational Fluid Dynamics (CFD) - Computational Structural Dynamics (CSD) can obtain full structural and aerodynamic behavior of a deformable aircraft. However, these models are so large that pose a significant challenge from the control systems design perspective. Thus, the development of an aeroelastic modeling software that can be …

Preliminary Test Predictions For Scale Ram-Air Parachute Testing, Christian A. Guzman Zurita

Doctoral Dissertations and Master's Theses

The present thesis proposes a preliminary analysis to predict the aerodynamic performance for experimental tests of ram-air parachutes in a wind tunnel. A scaled experimental test setup is developed for determining the aerodynamic coefficients of lift (𝐶𝐿) and drag (𝐶𝐷) conducted in a wind tunnel. Additionally, a CFD approach where a steady-state parachute shape defined based on experiments, photographs, and literature, is presented. The accuracy of the simulation depends considerably on the ability to resolve the canopy geometry. Therefore, a CAD geometry generation is implemented for flexible control of the canopy structure by implementing design parameters, e.g., chord, span and …

Cfd Study Of Taylor-Like Vortices In Swirling Flows, Sattar Panahandehgar

Doctoral Dissertations and Master's Theses

Swirling flows are complex fluid motions that appear in various natural phenomena and man-made devices. Numerous engineering applications such as turbomachinery, jet engine combustion chambers, mixing tanks and industrial burners involve swirling flows. This wide range of applications is due to unique characteristics offered by swirling flows such as increase in mixing rate, heat transfer rate and wall shear stress. In this study the axisymmetric swirling flow behavior in the context of a hybrid rocket engine have been analyzed. While modeling the flow inside a cylindrical chamber using CFD, a similarity with the Taylor vortices instability has been observed. Similar …

Numerical Study Of Spacer Grid Geometry In A 5 X 5 Nuclear Fuel Rod Bundle, Wan Chuan Fan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Reactor fuel rod bundles serve as the primary heat source in light water reactors (LWRs), commonly found in the aforementioned PWR plants. The fuel rod bundles’ structure consists of a collection of fuel rods put into a parallel grid configuration. The bundles also include fuel rod spacers, which hold the fuel rods in place, in accordance with the grid. Repeating structures of the fuel bundles create the meta-structure in the reactor. In other words, the grid configuration repeats until it fills the entire space of the reactor. This results in reactor fuel rods suspended in the working fluid domain, oriented …

Numerical Analysis And Fluid Flow Modeling Of Incompressible Navier-Stokes Equations, Tahj Hill

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Navier-Stokes equations (NSE) are an essential set of partial differential equations for governing the motion of fluids. In this paper, we will study the NSE for an incompressible flow, one which density ρ = ρ0 is constant.

First, we will present the derivation of the NSE and discuss solutions and boundary conditions for the equations. We will then discuss the Reynolds number, a dimensionless number that is important in the observations of fluid flow patterns. We will study the NSE at various Reynolds numbers, and use the Reynolds number to write the NSE in a nondimensional form.

We will …

Assessing Simulated Transmissivity In Numerical Flow Models Of Complex Hydrogeology, Afan Tarar

UNLV Theses, Dissertations, Professional Papers, and Capstones

Accurately extracting a meaningful transmissivity, a target value within one order of magnitude of field estimates, in numerical models poses a significant challenge when modeling complex groundwater systems. Aquifer transmissivity is directly proportional to the aquifer thickness and the estimated aquifer hydraulic conductivity. In complex geologic conditions (especially in fractured systems) with multiple heterogeneous and anisotropic hydrogeologic units, transmissivity can vary over several orders of magnitude.

To extract a meaningful value of transmissivity from a numerical model, a simple five-layer MODFLOW model was constructed. Each layer in the model was assigned a fixed hydraulic conductivity and thickness. The model simulates …

Double Wall Cooling Of A Full Coverage Effusion Plate With Main Flow Pressure Gradient, Including Internal Impingement Array Cooling, Sneha R. Vanga, David Ritchie, Austin Click, Zhong Ren, Phil Ligrani, Federico Liberatore, Rajeshriben Patel, Ram Srinivasan, Yin-Hsiang Ho

PRC-Affiliated Research

The present study provides new effusion cooling data for both the surfaces of the fullcoverage effusion cooling plate. For the effusion-cooled surface, presented are spatially resolved distributions of surface adiabatic film cooling effectiveness and surface heat transfer coefficients (measured using transient techniques and infrared thermography). For the impingement-cooled surface, presented are spatially resolved distributions of surface Nusselt numbers (measured using steady-state liquid crystal thermography). To produce this cool-side augmentation, impingement jet arrays at different jet Reynolds numbers, from 2720 to 11,100, are employed. Experimental data are given for a sparse effusion hole array, with spanwise and streamwise impingement hole spacing …

Double Wall Cooling Of A Full Coverage Effusion Plate With Main Flow Pressure Gradient, Including Internal Impingement Array Cooling, Sneha R. Vanga, David Ritchie, Austin Click, Zhong Ren, Phil Ligrani, Federico Liberatore, Rajeshriben Patel, Ram Srinivasan, Yin-Hsiang Ho

PRC-Affiliated Research

The present study provides new effusion cooling data for both the surfaces of the fullcoverage effusion cooling plate. For the effusion-cooled surface, presented are spatially resolved distributions of surface adiabatic film cooling effectiveness and surface heat transfer coefficients (measured using transient techniques and infrared thermography). For the impingement-cooled surface, presented are spatially resolved distributions of surface Nusselt numbers (measured using steady-state liquid crystal thermography). To produce this cool-side augmentation, impingement jet arrays at different jet Reynolds numbers, from 2720 to 11,100, are employed. Experimental data are given for a sparse effusion hole array, with spanwise and streamwise impingement hole spacing …

Double Wall Cooling Of A Full Coverage Effusion Plate With Main Flow Pressure Gradient, Including Internal Impingement Array Cooling, Sneha R. Vanga, David Ritchie, Austin Click, Zhong Ren, Phil Ligrani, Federico Liberatore, Rajeshriben Patel, Ram Srinivasan, Yin-Hsiang Ho

PRC-Affiliated Research

The present study provides new effusion cooling data for both the surfaces of the fullcoverage effusion cooling plate. For the effusion-cooled surface, presented are spatially resolved distributions of surface adiabatic film cooling effectiveness and surface heat transfer coefficients (measured using transient techniques and infrared thermography). For the impingement-cooled surface, presented are spatially resolved distributions of surface Nusselt numbers (measured using steady-state liquid crystal thermography). To produce this cool-side augmentation, impingement jet arrays at different jet Reynolds numbers, from 2720 to 11,100, are employed. Experimental data are given for a sparse effusion hole array, with spanwise and streamwise impingement hole spacing …

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Student Scholar Showcase

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades, advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats, and an increasing popularity of self-driving cars. We predicted the motion of an autonomous vehicle using simulations in Python. The simulation models the motion of a small scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as …

Scale Interactions Within A Perturbed Plane Wall Jet, Shibani Bhatt

Doctoral Dissertations and Master's Theses

The current work focuses on exploiting this behavior to manipulate wall turbulence by targeting the large-scales of the flow. In wall turbulence the large-scales of the flow interact with the smaller scales in a non-linear manner including through a process of amplitude and frequency modulation. A plane wall jet (PWJ) is chosen as the model flow field for this work as its unique geometry allows for the controlled introduction of large-scale perturbations through acoustic forcing. The corresponding interactions because of forcing are characterized using single hot-wire measurements. The nearwall response of the PWJ over a range of large-scale forcing showed …

Investigation Of Endwall Vortex Manipulation In High Lift Turbines Caused By Active Endwall Forcing, Horatio J. Babcock

Theses and Dissertations

With the increased demand for lighter, more fuel efficient and smaller gas turbine engines, the impetus to reduce the weight and size of the turbine has become apparent. One approach to reduce this weight is to reduce the number of blades in the turbine. However, to maintain power output, each blade must be capable of supporting a greater amount of lift. While several high-lift turbine profiles have been detailed in literature, most of these profiles have increased endwall losses, despite their desirable mid-span characteristics. To mitigate this endwall loss, a number of active and passive flow approaches have been studied …

Tracking Shock Movement On The Surface Of An Oscillating, Straked Semispan Delta Wing, Justin A. Pung

Theses and Dissertations

A recent research effort, sponsored by the Air Force Office of Scientific Research, numerically investigated the unsteady aerodynamic flow field around an oscillating, straked, delta wing. The study was centered on determining the importance of the unsteady aerodynamic forces acting as a driver for a nonlinear motion known as limit cycle oscillations. The current effort focused on creating a computational model to compare to the results of previous tests and modeling efforts and discover new information regarding the onset of LCO. The computational model was constructed using the Cartesian overset capabilities of the CREATE-AV™ fixed wing fluid dynamics solver Kestrel. …

Influence Of Leading Edge Oscillatory Blowing On Time-Accurate Dynamic Store Separation, Ryan G. Saunders

Theses and Dissertations

The primary objective of this research is to support the static and dynamic characterization and the time-accurate dynamic load data acquisition of store separation from a cavity with leading edge oscillatory blowing. Developing an understanding of, and potentially controlling, pitch bifurcation of a store release is a motivation for this research. The apparatus and data acquisition system was used in a two-part experiment to collect both static and dynamic testing data in the AFIT low speed wind tunnel in speeds of 60, 100, and 120 mph, from Reynolds numbers varying from 5.5x10⁴ to 4.6x10⁵, depending on reference …

Analytical Models And Control Design Approaches For A 6 Dof Motion Test Apparatus, Kyra L. Schmidt

Theses and Dissertations

Wind tunnels play an indispensable role in the process of aircraft design, providing a test bed to produce valuable, accurate data that can be extrapolated to actual flight conditions. Historically, time-averaged data has made up the bulk of wind tunnel research, but modern flight design necessitates the use of dynamic wind tunnel testing to provide time-accurate data for high frequency motion. This research explores the use of a 6 degree of freedom (DOF) motion test apparatus (MTA) in the form of a robotic arm to allow models inside a subsonic wind tunnel to track prescribed trajectories to obtain time-accurate force …

Wall Model Large Eddy Simulation Of A Diffusing Serpentine Inlet Duct, Ryan J. Thompson

Theses and Dissertations

The modeling focus on serpentine inlet ducts (S-duct), as with any inlet, is to quantify the total pressure recovery and ow distortion after the inlet, which directly impacts the performance of a turbine engine fed by the inlet. Accurate prediction of S-duct ow has yet to be achieved amongst the computational fluid dynamics (CFD) community to improve the reliance on modeling reducing costly testing. While direct numerical simulation of the turbulent ow in an S-duct is too cost prohibitive due to grid scaling with Reynolds number, wall-modeled large eddy simulation (WM-LES) serves as a tractable alternative. US3D, a hypersonic research …