Mechanical Engineering Commons^™

Magnetically Induced Carrier Distribution In A Composite Rod Of Piezoelectric Semiconductors And Piezomagnetics, Guolin Wang, Jinxi Liu, Wenjie Feng, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, we study the behavior of a composite rod consisting of a piezoelectric semiconductor layer and two piezomagnetic layers under an applied axial magnetic field. Based on the phenomenological theories of piezoelectric semiconductors and piezomagnetics, a one-dimensional model is developed from which an analytical solution is obtained. The explicit expressions of the coupled fields and the numerical results show that an axially applied magnetic field produces extensional deformation through piezomagnetic coupling, the extension then produces polarization through piezoelectric coupling, and the polarization then causes the redistribution of mobile charges. Thus, the composite rod exhibits a coupling between the …

Monocular Visual Inertial Odometry Using Learning-Based Methods, Yuan Tian

Doctoral Dissertations and Master's Theses

Precise pose information is a fundamental prerequisite for numerous applications in robotics, Artificial Intelligent and mobile computing. Many well-developed algorithms have been established using a single sensor or multiple sensors. Visual Inertial Odometry (VIO) uses images and inertial measurements to estimate the motion and is considered a key technology for GPS-denied localization in the real world and also virtual reality and augmented reality.

This study develops three novel learning-based approaches to Odometry estimation using a monocular camera and inertial measurement unit. The networks are well-trained on standard datasets, KITTI and EuROC, and a custom dataset using supervised, unsupervised and semi-supervised …

Tracking Joint Angles During Whole-Arm Movements Using Electromagnetic Sensors, Ryan Clark, Taylor Dickinson, Johnfredy Loaiza, Daniel W. Geiger, Steven Knight Charles

Faculty Publications

Electromagnetic (EM) motion tracking systems are suitable for many research and clinical applications, including in-vivo measurements of whole-arm movements. Unfortunately, the methodology for in vivo measurements of whole-arm movements using EM sensors is not well described in the literature, making it difficult to perform new measurements and all but impossible to make meaningful comparisons between studies. The recommendations of the International Society of Biomechanics (ISB) have provided a great service, but by necessity they do not provide clear guidance or standardization on all required steps. The goal of this paper was to provide a comprehensive methodology for using EM sensors …

Casimir Effect On Amplitude-Frequency Response Of Parametric Resonance Of Electrostatically Actuated Nems Cantilever Resonators, Dumitru Caruntu, Christian A. Reyes

Mechanical Engineering Faculty Publications

This paper deals with the effect of Casimir force on the amplitudefrequency response of parametric resonance of electrostatically actuated nanoresonators. The resonator is actuated by using an electrostatic force to include a f irst order fringe correction. Casimir force and viscous damping force are included in the model, as well. Both electrostatic and Casimir forces are nonlinear. The behavior of the resonator is investigated using two methods, the Method of Multiple Scales (MMS) for a Reduced Order Model (ROM) using one mode of vibration, and numerical integration of ROMs using up to five modes of vibration. ROM is based on …

Implementation Of Cholesteric Liquid Crystals In Fibrous Based Membranes, Ydana Yanell Virgen Gracia

Theses and Dissertations

The project consists of an investigation of optical sensors. On this project, the main focus was to implement materials that had properties such as thermochromism, piezochromism, and be able to detect volatile organic compounds with a color change response. The materials selected for this project were Cholesteric Liquid Crystals (CLCs) in different combinations and ratios. There were also four different methods using Forcespinning © technology to apply the CLCs into a polymer matrix; these were, In-Solution, Dip Coating, Coaxial Spinning, and Emulsion. The best results were given by Dip Coating, but the method with the best viable solution was Coaxial …

Preventing Delayed Cracks In Sus304 Deep Drawn Cups Using Extreme Blank Holding Forces Aided By Nanolubrication, Ibrahim Muhammad Shafiq

Student Works (2020-2029)

This study was to investigate the formation and reformation of delayed cracks of SUS304 cylindrical drawn cups under elevated blank holding force (BHF) from 8~32 kN with 1~3 wt% SiO2 nanolubricants concentrations. The widest crack-free BHF range i.e. from 29 ~ 31 kN was determined for 2 wt% of SiO2 in the experiment. Delayed cracks were also observed below and beyond this BHF range. There was an increment of frictional force at the cup flange region when entering the crack-free BHF range, as proven by the rebound in sidewall thickness, relative intensity of α′-martensite, elongated height and drawing force beyond …

Microstructural Characteristics And Mechanical Properties Of Sn-Ag-Cu Solders With Minor Additions Of Al And Zn, Yee Mei Leong

Student Works (2020-2029)

Driven by the recent trend towards miniaturization of lead free electronic products, researchers are putting immense efforts to improve the properties and reliability of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC 105 (Sn-1.0Ag-0.5Cu) solder because of economic reasons and improvement of impact resistance as compared to SAC387(Sn-3.8Ag-0.7Ag). The present work investigates the effect of minor (0.1-0.5wt.%) Aluminium (Al) and Zinc (Zn) addition to SAC105 on the bulk and interfacial structure between solder and copper substrate during reflow and after thermal aging , the mechanical properties of the solder joint and the …

A Computational Study Of Water Mobility On Smooth Surface, Cavities And Porous Structure With Hydrophilic And Hydrophobic Coatings, Kok Wee Yong

Student Works (2020-2029)

This research focus on water mobility and discovers a new phenomenon where droplet accelerates on a hydrophilic cavity surface when sliding down from a hydrophobic surface. The kinetic energy of droplet increases six (6) times higher than before sliding into the first cavity. This finding is useful for creating an effective way of filling liquids into cavities for passive microfluidics related devices. The work consists of validating cases using Computational Fluid Dynamics (CFD) software. The first part of the research reviews the literature regarding CFD modelling of a water droplet (i) sliding down on a surface, (ii) detachment in a …

Modeling Of Heavy Vehicle Braking Related To Accident Reconstruction For A Range Of Vehicle And Road Characteristics, Zamzamzadeh Mahdieh

Student Works (2020-2029)

In today's heavy-vehicle accidents, one of the major contributors is emergency braking, particularly for vehicles without an anti-lock braking system (ABS), which is dominant in developing countries like Malaysia. As the heavy vehicle driver applies emergency braking, there is a high chance of wheel lock-up, at which point the vehicle will skid along the road, creating braking marks from the tires. These braking marks are often used in crash reconstructions. Braking marks are mainly used by investigators to examine the vehicle's pre-impact velocity. There are many models and formulations based on kinetic energy that show the effect of some parameters. …

Multi-Homotopy Class Optimal Path Planning For Manipulation With One Degree Of Redundancy, Jacob J. Rice, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

Redundant manipulators have an infinitely large set of joint paths that yield a desired end-effector path in the task space. A unique joint path can be obtained by minimizing a global cost function. Prior optimal control methods minimize a global cost function to find a local minimum within a homotopy class. Many possible locally optimal joint paths are in different homotopy classes. This paper presents an algorithm that effectively searches the solution space and finds many locally optimal paths in all relevant homotopy classes. The path with the lowest cost is very likely the globally optimal path. The algorithm is …

Parametric Study Of A Triboelectric Transducer In Total Knee Replacement Application, Alwathiqbellah Ibrahim, Geofrey Yamomo, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Triboelectric energy harvesting is a relatively new technology showing promise for biomedical applications. This study investigates a triboelectric energy transducer for potential applications in total knee replacement (TKR) both as an energy harvester and a sensor. The sensor can be used to monitor loads at the knee joint. The proposed transducer generates an electrical signal that is directly related to the periodic mechanical load from walking. The proportionality between the generated electrical signal and the load transferred to the knee enables triboelectric transducers to be used as self-powered active load sensors. We analyzed the performance of a triboelectric transducer when …

Optimization Of Railroad Bearing Health Monitoring System For Wireless Utilization, Jonas Cuanang, Constantine Tarawneh, Martin Amaro Jr., Jennifer Lima, Heinrich D. Foltz

Mechanical Engineering Faculty Publications

In the railroad industry, systematic health inspections of freight railcar bearings are required. Bearings are subjected to high loads and run at high speeds, so over time the bearings may develop a defect that can potentially cause a derailment if left in service operation. Current bearing condition monitoring systems include Hot-Box Detectors (HBDs) and Trackside Acoustic Detection Systems (TADS™). The commonly used HBDs use non-contact infrared sensors to detect abnormal temperatures of bearings as they pass over the detector. Bearing temperatures that are about 94°C above ambient conditions will trigger an alarm indicating that the bearing must be removed from …

Processing-Structure-Property Relationships Of Biopolyester/Zinc Oxide Fibrous Scaffolds Engineered By Centrifugal Spinning, Victoria Padilla-Gainza, Heriberto Rodríguez-Tobías, Graciela Morales, Antonio Ledezma-Pérez, Carmen Alvarado-Canché, Cristobal Rodriguez, Robert Gilkerson, Karen Lozano

Mechanical Engineering Faculty Publications

This study addresses the processing of nonwoven fibrous materials obtained by centrifugal spinning method, namely Forcespinning; a high yield and low production cost technique little explored in this field. Poly(D, L-lactic acid) (PDLLA) and poly(3-hydroxybutyrate) (PHB) were used as matrices and reinforced with zinc oxide nanoparticles (n-ZnO). The morphology, mechanical, and thermal performance of the developed composites were analyzed as well as the antibacterial effect of n-ZnO. Fibrous materials with n-ZnO concentrations of 1, 3, and 5 wt. % for PDLLA and 1 and 3 wt. % for PHB were evaluated. The results showed that the incorporation of n-ZnO produces …

Guided-Wave Shm And Nde Of Composite Structures: Modeling And Experiments, Hanfei Mei

Theses and Dissertations

The extensive use of composites in aerospace structures has posed new challenges for implementing effective structural health monitoring (SHM) and nondestructive evaluation (NDE) techniques due to the general anisotropic behavior and complex damage scenarios in composites. This dissertation addresses the SHM and NDE of composites using ultrasonic guided waves, with an emphasis on theoretical modeling and experimental validation of guided-wave propagation and interaction with damage in composites. A semi-analytical finite element (SAFE) approach is presented to calculate guided-wave dispersion curves in composites. The theoretical framework is formulated using the finite element method (FEM) to describe the material variation along the …

Fundamental Understanding Of Plasma Discharge Formation In Liquid And Multiphase Configurations Through Multiphysics Modeling, Ali Charchi Aghdam

Theses and Dissertations

During the last two decades, non-thermal plasma discharges in and in contact with liquids have received significant attention due to their wide range of applications including chemical analysis, medical, water treatment, fuel processing, etc. Despite the tremendous interest and advances attained in the experimental studies, modeling efforts providing a comprehensive understanding of the underlying physicochemical processes are limited. There is still no unified theory on plasma formation in dense medium and various theories have been proposed such as the presence of bubbles and tunneling which are topics of debate. In the first part of this study, a mathematical model is …

Enhancing Single And Two-Phase Heat Transfer Of Microgap Heat Sinks Using Nano-Structure Coatings, Yueyang Zhao

Theses and Dissertations

Due to the shrinking size and increasing power of electronics, the heat flux generated by electronic devices has greatly increased and imposed challenges to thermal management technologies. Numerous cooling technologies have been developed to cool high-power electronics. Among them, flow boiling in microchannels or a microgap has been one of the most efficient ways to remove high heat flux, which requires less coolant compared with single-phase cooling techniques. However, the flow boiling instability is the one of the most challenging issues, which lead to the premature critical heat flux (CHF) conditions and deteriorate heat transfer rate. The capillary force generated …

Towards A Cyber-Physical Manufacturing Cloud Through Operable Digital Twins And Virtual Production Lines, Md Rakib Shahriar

Graduate Theses and Dissertations

In last decade, the paradigm of Cyber-Physical Systems (CPS) has integrated industrial manufacturing systems with Cloud Computing technologies for Cloud Manufacturing. Up to 2015, there were many CPS-based manufacturing systems that collected real-time machining data to perform remote monitoring, prognostics and health management, and predictive maintenance. However, these CPS-integrated and network ready machines were not directly connected to the elements of Cloud Manufacturing and required human-in-the-loop. Addressing this gap, we introduced a new paradigm of Cyber-Physical Manufacturing Cloud (CPMC) that bridges a gap between physical machines and virtual space in 2017. CPMC virtualizes machine tools in cloud through web services …

Performance Analysis Of Renewable Energy Resources In Rural Areas: A Case Study Of Solar Energy, Jackson Justo

Tanzania Journal of Engineering and Technology (TJET)

This paper presents an overview of the recent development trends of solar photovoltaic (PV) systems and the performance in the Tanzanian context. The two types of solar power generation that are considered in this paper are: i) solar PV systems and ii) concentrated solar power (CSP). The two are compared in terms of cost of energy and energy storage mechanism. Moreover, the effect of ambient temperature on the solar PV module is analyzed. In addition, a detailed analysis on using solar axis tracking to increase the power generation is also presented. The extent to which the cell surface temperature and …

Modeling And Control Of Solar Pv With Battery Energy Storage For Rural Electrification, Irene Masenge

Tanzania Journal of Engineering and Technology (TJET)

In rural areas where electric power grid network is rarely available, power generation from renewable energy resource such as solar photovoltaic (PV) is mostly accomplished in standalone mode. The standalone solar PV system requires energy storage device to achieve reliable power supply to the end users. This paper presents modelling and coordination control of solar PV with battery energy storage system (BESS) for rural-electrification applications. The proposed control is accomplished via a bidirectional buck-boost converter with the objective of maintaining voltage at the DC bus constant. Simulation results based-on MATLAB/Simulink platform confirms good performance of the proposed system

Open-Source Digitally Replicable Lab-Grade Scales, Benjamin R. Hubbard, Joshua M. Pearce

Michigan Tech Publications, Part 1

This study provides designs for a low-cost, easily replicable open-source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open-source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open-source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open-source scale was found to be repeatable within 0.05 g with multiple load cells, with even better precision (0.005 …

Simultaneous Effects Of Rice Husk Silica And Silicon Carbide Whiskers On The Mechanical Properties And Morphology Of Sodium Geopolymer, Akm Rahman, Chirag Shah, Nihkil Gupta

Publications and Research

The current research is focused on developing a geopolymer binder using rice husk ash–derived silica nanoparticles. Four types of rice husks were collected directly from various rice fields of Bangladesh in order to evaluate the pozzolanic activity and compatibility of the derived rice husk ashes with precursors of sodium-based geopolymers. Silicon carbide whiskers were introduced into sodium-based geopolymers in order to evaluate the response of silicon carbide whiskers to the interfacial bonding and strength of sodium-based geopolymers along with rice husk ashes. Compression, flexural and short beam shear tests were performed to investigate the synergistic effect of rice husk ashes–derived …

Polyimide/Silicon Dioxide Nanocomposites As Dielectrics For Helium-Cooled High-Temperature Superconducting Cables, Harrison Michael Hones

Theses and Dissertations

In this thesis, polyimide (PI) and silicon dioxide (SiO2) were combined in the form of a nanocomposite for use as a dielectric on helium-cooled high-temperature superconducting (HTS) cables. Further, a cryogenic chamber was designed with the intent of cooling samples to 40 K for dielectric and thermal contraction testing. Composites were created through an in situ process which resulted in nanoparticle formation within the host matrix. Samples were tested for dielectric strength at room temperature (300 K) as well as cryogenic temperature (92 K) using liquid nitrogen as the coolant. Composite samples tested at 300 K averaged a dielectric strength …

Characterization And Modeling Of Surface Roughness And Burr Formation In Slot Milling Of Polycarbonate, David Adeniji, Julius M. Schoop, Shehan Gunawardena, Craig Hanson, Muhammad Jahan

Mechanical Engineering Faculty Publications

Thermoplastic materials hold great promise for next-generation engineered and sustainable plastics and composites. However, due to their thermoplastic nature and viscoplastic material response, it is difficult to predict the properties of surfaces generated by machining. This is especially problematic in micro-channel machining, where burr formation and excessive surface roughness lead to poor component-surface integrity. This study attempts to model the influence of size effects, which occur due to the finite sharpness of any cutting tool, on surface finish and burr formation during micro-milling of an important thermoplastic material, polycarbonate. Experimental results show that the depth of cut does not affect …

Investigation Of Deformation Induced Micro To Macro Scale Surface Roughness, Ayotunde Olayinka, William J. Emblom, Scott W. Wagner, Michael Khonsari, Ali Haghshenas

Michigan Tech Publications, Part 1

In the present work the relationship between deformation and deformation induced surface roughness of 100 micron thick annealed AISI 304 stainless steel was investigated at the meso scale. This work is a continuation of the previous work by the authors where roughness values were determined at the apex of the bulge test samples at micro scale. The apex is believed to be the region of highest stress and strain in a typical bulge process in a circular die. The material was deformed using a biaxial bulge test through hydraulic fluid pressure. The strains on the workpieces were measured with respect …

Influence Of Elements Of Irrigation Equipment On Irrigation Erosion, M.M. Sarimsakov, O.S. Abdisamatov, Z.T. Umarova

Irrigation and Melioration

Irrigation erosion is a process that has a significant negative impact on agricultural production, which leads to a sharp decrease in soil fertility and productivity. The costs associated with growing crops will increase. Today, more than 720,000 irrigated lands in the country suffer from irrigation erosion. Studies have shown that in typical gray soils with a slope of more than 0.30, intensive irrigation of apple orchards leaches 24.6 tons of soil particles per hectare per season. Improved irrigation, that is, a decrease in the leaching of soil particles during irrigation using transverse barriers, was achieved by 6–12%. Irrigation reduces the …

Research Of Water Flow Motion In The Channel Of Amu-Bukhara Machine Channel, D.R. Bazarov, F. Artikbekova, M.P. Tashkhanova, B.M. Norkulov

Irrigation and Melioration

The article considers a numerical study of the movement of a water stream in the channel of the Amu Bukhara Machine Channel (ABMK). Water intake to the inlet canal is carried out from the Amu Darya river in a damless manner, therefore, ensuring the flow of clarified water into the anterior chambers of pumping stations is an urgent task. According to the developed model, consisting of hydrodynamic equations based on the laws of conservation of momentum and mass, data on the dynamics of velocities in the channel of the supply channel ABMK are obtained and zones of uneven flow in …

Irrigation Value The Mechanical Composition River Springs, A.M. Arifjanov, L.N. Samiev, F.K. Babajanov

Irrigation and Melioration

The article studies the influence of the fractional composition of river sediments on the soil structure of irrigated lands and on the process of soil formation. According to surveys in the Mirishkor canal, sediments formed in the river are distinguished by the distribution type in the main canal. The fractional composition of sediments mainly consists of particles of fine sand (0.1-0.05 mm) and coarse dust (0.05-0.001 mm).According to the results of surveys, by studying the mechanical composition of sediment in the channel, it will be possible to observe changes in the amount of composition, such as N-NH4, P2O5, K2O chemicals. …

Monitoring System For Electricity Consumption At Pumping Stations, N. Ikramov, T. Majidov, A. Mukhammadjonov

Irrigation and Melioration

Currently, in Uzbekistan, of 4.3 million hectares of irrigated land, 2.3 million hectares are provided with water supplied by pumping stations that are on the balance of the Ministry of water management of the Republic of Uzbekistan. In total, 1693 pumping stations with 5301 pumping units are operated, and the number of pumping stations ' personnel is about 16,000 people. The total capacity of these pumping stations is about 7000 m3/s. the Total annual energy consumption of these pumping stations is about 8.0 billion kW·h or about 12.5% of the annual electricity generation of the entire energy sector of Uzbekistan. …

Irrigation Value The Mechanical Composition River Spring The Effect Of The Inhomogeneity Of Elastic Medium On The Initiation Of Resonant Waves Under Moving Load, S.A. Abdukadirov, Z.S. Shаdmаnova, B.Sh. Yuldoshev

Irrigation and Melioration

investigated. The waveguide properties of the system are preliminarily studied. The multiple roots of the dispersion equations are revealed and the critical load velocities leading to the formation of resonance processes are determined. The solutions of the dispersion equations make it possible to determine the additional critical velocities in the mid-wave spectrum depending on the structure parameters. For simple models, analytical solutions of the development of resonance processes are obtained that are asymptotically correct for relatively large values of time. The computer simulations allow us to analyze the quantitative features of the process over the entire time period of the …

Substantiation Of Sprayers Installed To A Universal Mounted Sprayer, D. Dzhuraev, M.S. Halilov, S.M. Badalov, I.Zh. Toirov, A.E. Urishev

Irrigation and Melioration

The article presents the results of theoretical and experimental studies on the creation of primary sprayers for sprayers. The flow diagrams of the atomizers that were produced on the territory of the former Soviet Union are given. Currently, various types of spray guns are manufactured in America, Germany, France, Italy, Bulgaria and other countries. Based on the set requirements for sprayers, to ensure fluid flow and spraying when deployed 90-110 degrees on a plane, a slotted sprayer is selected - manufacturer Lechler of the brand ST-110-05 Germany, for installation on a universal mounted sprayer. The results of fluid flow by …