Mechanical Engineering Commons^™

A Road Grade Based Weighting System For Calculating On-Road Distance-Specific Oxides Of Nitrogen Emissions Of Light-Duty Diesel Vehicles, Jason D. Bolyard

Graduate Theses, Dissertations, and Problem Reports (ETD)

Light-duty diesel vehicles have received significant public and governmental scrutiny recently for violating emissions regulations. Similar to the heavy-duty diesel manufacturers during the late 1990’s, some light-duty manufacturers were implementing different control strategies between laboratory certification tests and customer on-road operation. These devices allowed the vehicle to pass certification tests but then use alternative operation on the road during normal use. The alternative operation would allow for better fuel economy but higher oxides of nitrogen (NOx) emissions. Light-duty vehicles are currently certified in the US using chassis dynamometer testing. The effects of all on-road driving conditions are not mimicked in …

Effect Of Feedrate, Depth Of Cut, Tool Material, And Toolpath On Dimensional Accuracy And Surface Roughness Of Milled Cfrp, Assem Hesham Almadani

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis investigates the effect of different factors on Carbon Fiber Reinforced Polymers (CFRP) milling, like feedrate, tool material, and cutting speed. CFRP offers excellent material properties, which led to the increase of the material in today's manufacturing industry. CFRP offers up to 2.25 times steel's modulus of elasticity at about a fifth of the weight and excellent thermal properties, which allow the use of this material in applications with high heat like automobiles. Many industries have implemented the use of CFRP in their applications, like airplanes and automobiles, which lead to a decrease in weight and increase in strength. …

The Development Of A Holistic Quality Score Using In-Situ Monitoring Of Laser Powder Bed Fusion, Ryan Daigneault

College of Graduate Studies: Theses & Dissertations

Additive manufacturing processes allow for a great degree of flexibility in terms of part production. The process is autonomous once the part has started printing in that the operator generally does not need to intervene until the part is finished. One issue that this introduces, however, is an inability to determine part quality during the printing process. Once a part has started printing, the operator must either wait until the part is finished or regularly check on the part during the print to determine the part quality. Using data gathered from multiple sensors, a quality score can be used to …

Design Of Compact Signal Distribution Device For Hoffman Reflex Methodologic Applications In Sports Medicine, Abayomi E. Folaranmi

College of Graduate Studies: Theses & Dissertations

A study is presented on the design of compact sized signal distribution device for Hoffman reflex methodological applications in sports medicine. Established conventional method for measuring and recording human or animal nervous system response to external electrical stimulus was considered in this study. Challenges with measuring and recording techniques which introduces inaccuracies and unreliability of reflex response data obtained was analyzed, this work is aimed at improving the reliability of H-reflex d measuring and recording technique for the purpose of reducing inaccuracies introduced to data obtained because of conventional methodologic approach. Inaccuracies due to changes in subject muscle geometry and …

In-Situ Process Monitoring For Metal Additive Manufacturing (Am) Through Acoustic Technique, Md Shahjahan Hossain

College of Graduate Studies: Theses & Dissertations

Additive Manufacturing (AM) is currently a widely used technology in different industries such as aerospace, medical, and consumer products. Previously it was mainly used for prototyping of the products, but now it is equally valuable for commercial product manufacturing. More profound understanding is still needed to track and identify defects during the AM process to ensure higher quality products with less material waste. Nondestructive testing becomes an essential form of testing for AM parts, where AE is one of the most used methods for in situ process monitoring. The Acoustic Emission (AE) approach has gained a reputation in nondestructive testing …

Powertrain Fuel Consumption Modeling And Benchmark Analysis Of A Parallel P4 Hybrid Electric Vehicle Using Dynamic Programming, Aaron Robert Mull

Graduate Theses, Dissertations, and Problem Reports (ETD)

As regulations on the emission of greenhouse gasses continue to tighten on the automotive industry, the production of hybrid electric vehicles has gained significant popularity in recent years. With the increase in production, there has been a parallel demand in the advancement of both mechanical hardware and control system implementation used in these vehicles. A critical factor in the efficient operation of a hybrid electric vehicle is the energy management strategy where the goal is to maximize the efficient use of fuel energy to propel the vehicle. Designing a fuel-efficient control system is a complex challenge due to the degrees …

Let's Collaborate! The Importance Of Cybersecurity Pathways And Their Accessibility, Vukica Jovanovic, Otilia Popescu, Murat Kuzlu, Petros Katsioloudis

Engineering Technology Faculty Publications

[Introduction] I am very passionate about inspiring a new generation of the STEM workforce. Going through the engineering pathway myself since 9th grade, I have seen the value of technical education and early career choice. In high school, I learned so much about math and science, but also about the technical and applied aspects of STEM professions. I had one apprenticeship in electrical power and aluminum mill companies where I explored how the concepts from the classes convey to the real world. It was so much easier to learn all the equations and different aspects of technology from the textbook …

Design Of A Heat Exchanger For A Supercritical Co2 Turbine System, Kehinde Oluwatobi Adenuga

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research aims at designing a shell and tube heat exchanger which will drive a turbine operated on supercritical CO₂. Hot gases from boiler (simulated using air) at 1500 K is introduced into the shell to heat up the supercritical CO₂ at 10 MPa flowing within tubes from 450 K to 1050 K. The design was done using selected shell and tube heat exchanger empirical equations at predefined boundary conditions. The effect of shell and tube diameter on other design parameters was examined. It was observed that the number of tubes, tube external and internal side surface …

Sustainability Assessment Of Direct Energy Deposition (Ded) Based Hybrid Manufacturing Using Life Cycle Assessment (Lca) Method, Faujia Islam

Graduate Theses, Dissertations, and Problem Reports (ETD)

As sustainability has emerged as a highlight for almost every field over the last few decades, the manufacturing field is no exception. Generally, additive manufacturing performs better than traditional manufacturing in terms of sustainability because of its lean energy- and material usage. Previous studies have compared the sustainability performance between traditional and additive manufacturing, but hybrid manufacturing was not focused upon much. In this paper, the life cycle assessment method is used to analyze and compare the energy consumption and environmental impact of direct energy deposition (DED) based hybrid manufacturing and traditional manufacturing “CNC milling” process for a turbine blade. …

Analysis On Combined Heat And Power, And Combined Heat And Power Hybrid Systems For Unconventional Drilling Operations, Diego G. Dranuta Ferrer

Graduate Theses, Dissertations, and Problem Reports (ETD)

The United States (U.S.) has experienced a natural gas “boom” due to the development of unconventional shale plays, but well development is energy intensive. Operations use electric drilling rigs typically powered by either three high-horsepower diesel engines (HHPDE) or three dedicated natural gas engines (DNGE) and associated generators. From a first law analysis, HHPDEs peak at 42% efficiency at full load, while DNGE peak at about 30%. Most of the fuel energy is lost as heat rejected by the exhaust and radiators. Concurrently, during cold seasons rigs utilize boilers to provide steam throughout the rig to prevent freezing and provide …

An Equest Based Building Energy Modeling Analysis For Energy Efficiency Of Buildings, Saroj Lamichhane

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building energy performance is a function of numerous building parameters. In this study, sensitivity analysis on twenty parameters is performed to determine the top three parameters which have the most significant impact on the energy performance of buildings. Actual data from two fully operational commercial buildings were collected and used to develop a building energy model in eQUEST. The model is calibrated using Normalized Mean Bias Error (NMBE) and Coefficient of Variation of Root Mean Square Error (CV(RMSE)) method. The model satisfies the NMBE and CV(RMSE) criteria set by the American Society of Heating, Refrigeration, and Air-Conditioning (ASHRAE) Guideline 14, …

On The Improvement Of The Indirect Quantification Of Methane Emissions: A Stationary Single Sensor Approach, Robert Scott Heltzel

Graduate Theses, Dissertations, and Problem Reports (ETD)

There is a need for improved indirect quantification of methane emissions, particularly from the natural gas industry. Natural gas production continues to increase along with the number of wells and production sites. These production sites have the potential to contribute significant levels of methane emissions. Methane is a potent greenhouse gas and the primary component of natural gas. A more complete understanding of emissions through improved quantification will lead to enhanced mitigation. Emissions have historically been quantified with both direct and indirect methods, with varying results. Emissions have been shown to be both temporally and spatially variable. These facts have …

Investigating Nox Vs Co2 Tradeoff In Heavy Duty Emissions Through The Years Under The Scope Of Carb’S 3-Bin Moving Average Window Method, Ghadi Sadek

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the rise in urban pollution level over the last few years, regulatory agencies around the world have taken multiple steps to ensure engine exhaust pollutant are well monitored and properly regulated. Yet there exists a significant difference in emissions rates in various operating conditions between US and European products which currently uses a Moving average window (MAW) approach for their in-use compliance testing and certification program. Using WVU’s vehicle data collected using PEMS devices, this study aims at investigating the NOx versus CO2 tradeoff found in heavy duty diesel engines equipped with different aftertreatment technologies, under the scope of …

Determination Of Effectiveness Of Energy Management System In Buildings, Vivash Karki

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building Energy Management Systems (BEMS) are computer-based systems that aid in managing, controlling, and monitoring the building technical services and energy consumption by equipment used in the building. The effectiveness of BEMS is dependent upon numerous factors, among which the operational characteristics of the building and the BEMS control parameters also play an essential role. This research develops a user-driven simulation tool where users can input the building parameters and BEMS controls to determine the effectiveness of their BEMS. The simulation tool gives the user the flexibility to understand the potential energy savings by employing specific BEMS control and help …

Prediction Of Tensile Behaviors Of L-Ded 316 Stainless Steel Parts Using Machine Learning, Israt Zarin Era

Graduate Theses, Dissertations, and Problem Reports (ETD)

Directed energy deposition (DED) is a rising field in the arena of metal additive manufacturing and has extensive applications in aerospace, medical and rapid prototyping. The process parameters, such as laser power, scanning speed and specimen height, play a great deal in controlling and affecting the properties of DED fabricated parts. Nevertheless, both experimental and simulation methods have shown constraints and limited ability to generate accurate and efficient computational predictions on the correlations between the process parameters and the final part quality. In this work, a data driven machine learning model XGBoost has been built and applied to predict the …

Improving Real-Time Methane Monitoring In Longwall Coal Mines Through System Response Characterization Of A Multi-Nodal Methane Detection Network, Brian Philip Cappellini

Graduate Theses, Dissertations, and Problem Reports (ETD)

Machine automation and atmospheric monitoring are used by many industries to improve safety and productivity in the workplace. The underground Methane Watchdog System (MWS) is a multi-nodal network of sensors currently under development. The MWS aims to improve safety and productivity by introducing 10 compact sampling units designed to be easily integrated within the current roof support equipment of the mine. Each unit contains an array of sensors used to continuously monitor the environmental conditions which include methane concentration, temperature, pressure, and relative humidity. All MWS units report information back to a remote central processing hub (CPH) which collects nodal …

A Comparison Of Aerodynamic Models For Optimizing The Takeoff And Transition Of A Bi-Wing Tailsitter, Ryan Anderson, Jacob Willis, Jacob Johnson, Andrew Ning, Randal Beard

Faculty Publications

Electric vertical takeoff and landing (eVTOL) aircraft take advantage of distributed electric propulsion as well as aerodynamic lifting surfaces to take off vertically and perform long-duration flights. Complex aerodynamic interactions and a hard-to-predict transition maneuver from hover to wing-borne flight are one challenge in their development. To address this, we compare three different interaction models of varying fidelity for optimizing the transition trajectory of a biplane tailsitter. The first model accounts for simplified rotor-on-wing interactions using momentum theory, while the other two account for wing-on-wing interactions using a vortex lattice method and rotor-on-wing aerodynamic interactions using blade element momentum theory. …

Reducing Wind Farm Power Variance From Wind Direction Using Wind Farm Layout Optimization, Bertelsen Gagakuma, Andrew P.J. Stanley, Andrew Ning

Faculty Publications

This paper investigates reducing power variance caused by different wind directions by using wind farm layout optimization. The problem was formulated as a multi-objective optimization. The ε−constraint method was used to solve the bi-objective problem in a two-step optimization framework where two sequential optimizations were performed. The first was maximizing the mean wind farm power alone and the second was minimizing the power variance with a constraint on the mean power. The results show that the variance in power estimates can be greatly reduced, by as much as 30%, without sacrificing mean plant power for the different farm sizes and …

Development Of Synthetic Coal Char Simulant For Microwave Conversion Studies: A Computationally-Driven Approach, Kevin A. Hager

Graduate Theses, Dissertations, and Problem Reports (ETD)

Recent experimental demonstration of new reaction windows for coal char/methane reactions that are less energy-intensive, provides innovation for modular reactors. However, the correlation of the exact mechanism for the enhancement of these reaction windows is not certain. This study investigates the simplification of these experimental studies by developing a well-characterized coal char simulant. The approach involves using a computational approach to screen macroscopic composition to replicate the dielectric and compositional response of actual char. This study is focused on PRB coal char. A discrete element method (DEM) technique was used to simulate the packing of coal chars to give the …

Development Of Triangular And Tetrahedral Finite Elements For Solutions To Thermoelastic Instabilities Using Hotspotter, Cortney Samuel Leneave

Electronic Theses and Dissertations

The objective of the work presented in this thesis is to develop first-order triangular and tetrahedral elements for solutions to Thermoelastic Instabilities (TEI) regarding sliding friction systems in Hotspotter.

Hotspotter software uses a finite element method and an eigenvalue method and is an important tool because currently no other commercial software exists which solves the TEI problem for critical velocities and wave numbers of a system. Hotspotter currently uses quadrilateral and hexahedral elements for two and three dimensional analysis, respectively. Typically, tri and tet elements are used in industry when doing static and dynamic stress analysis. Therefore, the Hotspotter user …

An Accuracy And Precision Analysis Of The Velys™ Robotic Assisted Solution For Total Knee Arthroplasty, Gary Doan

Electronic Theses and Dissertations

Total knee arthroplasty (TKA) is a procedure where the arthritic surfaces of the knee is removed and replaced with a combination of metal and polymer implants that recreates the joint line to restore function and quality of life. Implant alignment is important in the success of a TKA. Modern day conventional instrumentation can be cumbersome in the operating room and can be inaccurate when resecting bone and aligning implants. Patients with large errors in resections and implant orientation are more prone to experience mechanical failures with their TKA. Mechanical failures in primary TKA require revision surgeries which can lead to …

Broadening The Capability Of Kinetics Analysis In Biomechanics, Nicholas Nelson

Electronic Theses and Dissertations

Two studies are discussed in this manuscript each preceded by a literature review of the topic. The first review and study explore agility movements and the effect that alternative upper designs in shoes might have on ground reaction force measures of performance. The second review and study evaluate methods of predicting ground reaction forces without the use of a force platform. A method of using effective forces and ways of improving its accuracy are evaluated in depth.

Tibial Strains And Tray-Bone Micromotions After Total Knee Arthroplasty: Computational Studies Evaluating The Tibial Fixation, Huizhou Yang

Electronic Theses and Dissertations

Cemented and cementless fixation in total knee arthroplasty (TKA) have been successfully used for decades. As the number of younger and more active patients treated with TKA continues to increase, long-term implant survivorship is of increasing importance. One of the most common complications and hence the reason for revision is mechanical loosening (23.1% of all revised TKA). The loosening mechanisms have been proposed for different fixation types. For cemented fixation, bone remodeling after surgery is regulated by the changes in strain energy density (SED). The recruitment of osteoclasts and osteoblasts is controlled by SED-related signals. Insufficient stimuli can promote bone …

A Semi-Active Vibration Isolator For 3d Printing On Shipboard, Mohammad Z. Shahabuddin

College of Graduate Studies: Theses & Dissertations

In the recent years, additive manufacturing (AM) (aka 3D printing)-has become a viable alternative to traditional manufacturing due to its unique advantages, such as enabling the fabrication of complex geometries at reduced weight and costs as well as allowing on-site fabrication for maintenance and repair. One specific application area of the AM is the navy vessels. During extended voyages, the navy vessels likely require the convenience of on-site fabrication of the malfunctioned parts. However, the shipboard equipment suffers from a broad range of external excitations arising not only from the waves but also from the vessel’s engines, which …

Reclamation Of Fused Silica From Investment Shells Used For Casting Steel, Samuel L. Holt

College of Graduate Studies: Theses & Dissertations

Fused silica is widely used for investment casting shell molds. Fused silica shells are discarded after being used for casting one time. This is due to the transformation of fused silica to beta cristobalite above 1652℉ (900℃). To reduce cost and waste of investment casting foundries, this study is exploring a method to inhibit transformation of fused silica and reclaim it from high temperature investment casting shells. This research has employed firing to minimalize fused silica transformation to cristobalite. The phase transformation is minimalized due to sintering and coarsening of the particles during firing. Coarsening reduces surface area to volume …

Design And Development Of Soft Earthworm Robot Driven By Fibrous Artificial Muscles, Beau Ragland

College of Graduate Studies: Theses & Dissertations

Earthworm robots have proven their viability in the fields of medicine, reconnaissance, search and rescue, and infrastructure inspection. These robots are traditionally typically hard-shelled and must be tethered to whatever drives their locomotion. For this reason, truly autonomous capabilities are not yet feasible. The goal of this thesis is to introduce a robot that not only sets the groundwork for autonomous locomotion, but also is safe for human-robot interaction. This was done by ensuring that the actuation principle utilized by the robot is safe around humans and can work in an untethered design. Artificial muscle actuation allowed for these prerequisites …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

College of Graduate Studies: Theses & Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …

Computational Intelligent Impact Force Modeling And Monitoring In Hislo Conditions For Maximizing Surface Mining Efficiency, Safety, And Health, Danish Ali

Doctoral Dissertations

"Shovel-truck systems are the most widely employed excavation and material handling systems for surface mining operations. During this process, a high-impact shovel loading operation (HISLO) produces large forces that cause extreme whole body vibrations (WBV) that can severely affect the safety and health of haul truck operators. Previously developed solutions have failed to produce satisfactory results as the vibrations at the truck operator seat still exceed the “Extremely Uncomfortable Limits”. This study was a novel effort in developing deep learning-based solution to the HISLO problem.

This research study developed a rigorous mathematical model and a 3D virtual simulation model to …

Fabrication, Characterization Of High-Entropy Alloys And Deep Learning-Based Inspection In Metal Additive Manufacturing, Wenyuan Cui

Doctoral Dissertations

"Alloying has been used to confer desirable properties to materials. It typically involves the addition of small amounts of secondary elements to a primary element. In the past decade, however, a new alloying strategy that involves the combination of multiple principal elements in high concentrations to create new materials called high- entropy alloys (HEAs) has been in vogue. In the first part, the investigation focused on the fabrication process and property assessment of the additive manufactured HEA to broaden its engineering applications. Additive manufacturing (AM) is based on manufacturing philosophy through the layer-by-layer method and accomplish the near net-shaped components …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …