Mechanical Engineering Commons^™

Effect Of Composition And Print Orientation On Thermal Conductivity Of 3d Printed Composites, Cory Jacques

Electronic Theses and Dissertations

Additive manufacturing (AM) technologies have become widely used for rapid prototyping and are beginning to be used for end-use applications. Fused Deposition Modeling (FDM) is a type of 3D printing where molten thermoplastic is extruded layer by layer to create parts. There is an increasing need for improvement and diversification of material properties to further extend the use of AM parts. AM parts have not been commonly used in heat transfer applications due to the limited availability of information on thermal conductivity of materials and the effects of printing orientation. A special apparatus was designed and built to experimentally test …

Rheology Of Particulate Suspensions With Non-Newtonian Fluids In Capillaries, Bin Xia, Paul Krueger

Mechanical Engineering Research

This resource contains the processed experimental measurements of the flow consistency index and flow behavior index, along with their trendlines, for the particulate suspensions investigated in "Rheology of Particulate Suspensions with Non-Newtonian Fluids in Capillaries" by Bin Xia and Paul S. Krueger.

The Mechanics And Multiphysics Of Biomimetic Discrete Exoskeleton Substrates, Hessein Ali

Electronic Theses and Dissertations, 2020-2023

Biological structures have inspired synthetic materials with unparalleled performances such as ultra-lightweight design, tunable elasticity, camouflaging, and antifouling. Among biological structures, exoskeletal scales that cover the exterior surfaces of fishes, fur, and many reptiles. These exoskeletal scales had appeared in the earliest stages of evolution of complex multicellular life and continued their existence in spite of millions of years of evolutionary pressures. This makes them an attractive candidate for biomimicry to produce high performance multifunctional materials with applications to soft robotics, wearables, energy efficient smart skins, antifouling surfaces and on-demand tunable materials. Canonically speaking, biomimetic samples can be fabricated by …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective, Part I—Digital Triad Concept And Its Application As A System Reference Model, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Rapidly developed information technologies (IT) have continuously empowered manufacturing systems and accelerated the evolution of manufacturing system paradigms, and smart manufacturing (SM) has become one of the most promising paradigms. The study of SM has attracted a great deal of attention for researchers in academia and practitioners in industry. However, an obvious fact is that people with different backgrounds have different expectations for SM, and this has led to high diversity, ambiguity, and inconsistency in terms of definitions, reference models, performance matrices, and system design methodologies. It has been found that the state of the art SM research is limited …

Laser-Microdrop Interactions In Nanoparticle Deposition On Solid Substrates, Tianyi Li

Electronic Theses and Dissertations, 2020-2023

Nanoparticle suspensions are utilized for depositing thin films on solid substrates by a process called nano electrospray laser deposition. In this research, three deposition methods, contact liquid line laser printing, nano-electrospray laser sintering and evaporative optical Marangoni convection are investigated experimentally and analytically. Thin silver lines are printed on indium tin oxide-coated silicon substrates by dispensing silver nanoparticle suspension with a micropipe of inner diameter 51µm and subsequently sintering the nanoparticles with a CO2 laser beam of Bessel intensity profile. The deposited silver lines of 65µm width and 1µm height have good resistivity which can be used to manufacture silver …

Test-Retest Reliability And Minimal Detectable Change Of The Computerized Dynamic Posturography Proprio For Adults With Chronic Traumatic Brain Injury, Guilherme Manna Cesar, Thad W. Buster, Judith M. Burnfield

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose: Balance deficits after brain injury, including reactive recovery from unexpected perturbations, can persist well after rehabilitation is concluded. While traditional clinical assessments are practical, the anticipatory nature of the tasks may mask perceptible balance control. Computerized dynamic posturography can directly quantify capacity to respond to unexpected, external perturbations. This study examined the reliability of the computerized dynamic posturography assessment with the device PROPRIO® 4000 in adults with traumatic brain injury and created the minimal detectable change for its standardized test.

Methods: Ten adults (ages 21–55 years) with chronic (average 10 ± 6 years post-injury) severe (loss of consciousness 2–75 …

Perceived Importance Of Aac Messages To Support Communication In Rehabilitation Settings, Susan Koch Fager, Judith M. Burnfield, Chase M Pfeifer, Tabatha Sorenson

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose: Permanent or temporary speech loss can occur due to a variety of medical conditions and often requires individuals to use augmentative and alternative communication (AAC) strategies and technologies to support communication. The use of AAC in medical and rehabilitation settings is critical to ensure the health, safety and psychological well-being of communicatively vulnerable individuals.

Method: This study surveyed the perceived importance of communication messages within five categories (Basic Needs, Patient-Provider Specific Communication, Social, Feelings, and Messages for Young Children) by individuals with disability who have undergone recent medical care as well as by rehabilitation care providers.

Results: Results indicated …

Feasibility Of Motor-Assisted Elliptical To Improve Walking, Fitness And Balance Following Pediatric Acquired Brain Injury: A Case Series, Judith M. Burnfield, Guilherme Manna Cesar, Thad W. Buster

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose: Walking, fitness, and balance deficits are common following acquired brain injury (ABI). This study assessed feasibility, acceptability, and usefulness of a modified motor-assisted elliptical (ICARE) in addressing walking, fitness, and balance deficits in children with chronic ABIs.

Methods: Three children (> 5 years post-ABI) completed 24 ICARE exercise sessions (exercise time, speed, and time overriding motor-assistance gradually increased) to promote mass repetition of gait-like movements and challenge cardiorespiratory fitness. Parents’ and children’s perceptions of ICARE’s safety, comfort, workout, and usability were assessed. Cardiovascular response, gait and balance outcomes were assessed.

Results: No adverse events occurred. Parent’s …

A Novel Large Animal Model Of Smoke Inhalation-Induced Acute Respiratory Distress Syndrome, Premila D. Leiphrakpam, Hannah R. Weber, Andrea Mccain, Roser Romaguera Matas, Ernesto Martinez Duarte, Keely L. Buesing

Department of Mechanical and Materials Engineering: Faculty Publications

Background: Acute respiratory distress syndrome (ARDS) is multifactorial and can result from sepsis, trauma, or pneumonia, amongst other primary pathologies. It is one of the major causes of death in critically ill patients with a reported mortality rate up to 45%. The present study focuses on the development of a large animal model of smoke inhalation-induced ARDS in an effort to provide the scientific community with a reliable, reproducible large animal model of isolated toxic inhalation injury-induced ARDS. Methods: Animals (n=21) were exposed to smoke under general anesthesia for 1 to 2 h (median smoke exposure=0.5 to 1 L of …

Ultrasound-Activated Ciliary Bands For Microrobotic Systems Inspired By Starfish, Cornel Dillinger, Nitesh Nama, Daniel Ahmed

Department of Mechanical and Materials Engineering: Faculty Publications

Cilia are short, hair-like appendages ubiquitous in various biological systems, which have evolved to manipulate and gather food in liquids at regimes where viscosity dominates inertia. Inspired by these natural systems, synthetic cilia have been developed and utilized in microfluidics and microrobotics to achieve functionalities such as propulsion, liquid pumping and mixing, and particle manipulation. Here, we demonstrate ultrasound-activated synthetic ciliary bands that mimic the natural arrangements of ciliary bands on the surface of starfish larva. Our system leverages nonlinear acoustics at microscales to drive bulk fluid motion via acoustically actuated small-amplitude oscillations of synthetic cilia. By arranging the planar …

A Machine Vision Based Automated Quality Control System For Product Dimensional Analysis, Aditya Akundi, Mark Reyna

Manufacturing & Industrial Engineering Faculty Publications

Quality control (QC) in manufacturing processes is critical to ensuring consumers receive products with proper functionality and reliability. Faulty products can lead to additional costs for the manufacturer and damage trust in a brand. A growing trend in QC is the use of machine vision (MV) systems because of their noncontact inspection, high repeatability, and relatively low cost. This paper presents a robust MV system developed to perform comparative dimensional inspection on diversely shaped samples, including additive manufacturing products. The algorithm used performs dimensional inspection on a base product considered to have acceptable dimensions. The perimeter, area, rectangularity, and circularity …

A Review On Application Of Model Based Systems Engineering To Manufacturing And Production Engineering Systems, Aditya Akundi, Viviana Lopez

Manufacturing & Industrial Engineering Faculty Publications

Increasing complexity in today’s manufacturing and production industry due to the need for higher flexibility and competitiveness is leading to inconsistencies in the iterative exchange loops of the system design process. To address these complexities and inconsistencies, an ongoing industry trend for organizations to make a transition from document-centric principles and applications to being model-centric is observed. In this paper, a literature review is presented highlighting the current need for an industry-wide transition from document-centric systems engineering to Model-Based Systems Engineering (MBSE). Further, investigating the tools and languages used by the researchers for facilitating the transition to and the integration …

Potential Production Of Theranostic Boron Nitride Nanotubes (64cu-Bnnts) Radiolabeled By Neutron Capture, Wellington Marcos Silva, Helio Ribeiro, Jaime Taha-Tijerina

Manufacturing & Industrial Engineering Faculty Publications

In this work, the radioisotope 64Cu was obtained from copper (II) chloride dihydrate in a nuclear research reactor by neutron capture, (63Cu(n, )64Cu), and incorporated into boron nitride nanotubes (BNNTs) using a solvothermal process. The produced 64Cu-BNNTs were analyzed by TEM, MEV, FTIR, XDR, XPS and gamma spectrometry, with which it was possible to observe the formation of64Cu nanoparticles, with sizes of up to 16 nm, distributed through nanotubes. The synthesized of 64Cu nanostructures showed a pure photoemission peak of 511 keV, which is characteristic of gamma radiation. This type of emission is desirable for Photon Emission Tomography (PET scan) …

Modeling And Optimization Of Process Parameters In Face Milling Of Ti6al4v Alloy Using Taguchi And Grey Relational Analysis, Al Mazedur Rahman, S M Abdur Rob, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

Titanium alloys are extensively used in aerospace, missiles, rockets, naval ships, automotive, medical devices, and even the consumer electronics industry where a high strength to density ratio, lightweight, high corrosion resistance, and resistance to high temperatures are important. The machining of these alloys has always been challenging for manufacturers. This article investigates the combined effect of radial depth, cutting speed and feed rate on cutting forces, tool life, and surface roughness during face milling of Ti6Al4V alloy. This study focuses on the significance of radial depth of cut on cutting force, tool life and surface roughness compared to that of …

El Español En Estados Unidos Como Recurso Para La Educación De Hispanos En Ingeniería, Hiram Moya

Manufacturing & Industrial Engineering Faculty Publications

Los Hispanos representan la más grande minoría en Estados Unidos. Sin embargo, el número de estudiantes hispanos en las carreras de ciencias y en particular en ingeniería ha estado subrepresentada por muchos años. Esta falta de representación ha hecho que se estudie de muchas formas los métodos de reclutar y retener y graduar estudiantes hispanos en ingeniería. Sin embargo, la urgencia continúa. Existen muchos retos para mejorar la participación de hispanos en ingeniería, incluyendo la falta costumbre en preguntar o solicitar ayuda, los retos económicos, y la falta de ejemplos a seguir en la facultad. Dado los retos, este artículo …

Direct Selective Laser Synthesis Of Cucrfenitial High Entropy Alloy From Elemental Powders Through Selective Laser Melting, Joni Dhar, Lazaro Lopez, Shanshan Zhang, Ben Xu, Mohammed Jasim Uddin, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This study investigated the synthesis of CuCrFeNiTiAl high entropy alloy (HEA) from pure elements using selective laser melting (SLM). The objectives are to validate the feasibility of the HEA fabrication from elemental powder materials, and to examine the effect of various process conditions in SLM, such as laser power, point distance and laser exposure time, on the microstructures formed. The as-built samples under high, medium and low energy densities were characterized by X-ray diffraction (XRD), and the microstructures were observed using scanning electron microscopy (SEM). The XRD results showed that five major crystal structure phases (hexagonal, monoclinic, orthorhombic, body-centered cubic …

Machine Learning Model Optimization With Hyper Parameter Tuning Approach, Md. Riyad Hossain, Douglas Timmer

Manufacturing & Industrial Engineering Faculty Publications

Hyper-parameters tuning is a key step to find the optimal machine learning parameters. Determining the best hyper-parameters takes a good deal of time, especially when the objective functions are costly to determine, or a large number of parameters are required to be tuned. In contrast to the conventional machine learning algorithms, Neural Network requires tuning hyperparameters more because it has to process a lot of parameters together, and depending on the fine tuning, the accuracy of the model can be varied in between 25%-90%. A few of the most effective techniques for tuning hyper-parameters in the Deep learning methods are: …

Non-Equilibrium Behavior Of Large-Scale Axial Vortex Cores, Robert L. Ash, Irfan R. Zardadkhan

Mechanical & Aerospace Engineering Faculty Publications

A logical basis for incorporating pressure non-equilibrium and turbulent eddy viscosity in an incompressible vortex model is presented. The infrasonic acoustic source implied in our earlier work has been examined. Finally, this non-equilibrium turbulent vortex core is shown to dissipate mechanical energy more slowly than a Burgers vortex, helping us to explain the persistence of axial vortices in nature. Recent molecular dynamics simulations replicate aspects of this non-equilibrium pressure behavior.

Évaluation Des Méthodes D’Essai Pour Déterminer La Résistance Au Glissement Des Chaussures Sur Des Surfaces Glacées : Document Synthèse, Chantal Gauvin, Atena Roshan Fekr, Yue Li, Gordon Wong, Wayne Cheng, David Pearsall, Tilak Dutta

Rapports de recherche scientifique

En saison hivernale, glisser sur la glace est l’un des principaux risques inhérents aux activités professionnelles exercées à l’extérieur. Alors que de nombreux travailleurs comptent sur leurs chaussures de travail pour les empêcher de glisser, ces derniers se retrouvent souvent devant un choix difficile quand vient le temps de sélectionner les meilleures bottes antidérapantes pour l’hiver. Des méthodes d’essai normalisées existent déjà pour évaluer le coefficient de friction (CdF) des chaussures sur des surfaces autres que la glace. Bien que l’appareil utilisé pour ces tests puisse être utilisé en tandem avec une machine qui permet de fabriquer des surfaces glacées …

Evaluation Of Test Methods For Determining Footwear Slip Resistance On Ice Surfaces, Chantal Gauvin, Atena Roshan Fekr, Yue Li, Gordon Wong, Wayne Cheng, David Pearsall, Tilak Dutta

Rapports de recherche scientifique

Slipping on ice is one of the main risks of outdoor occupational activities during winter. Ice and freezing rain were involved in 14% of slip, trip and fall (STF) accidents from 2014 to 2016 in Quebec. Many workers who perform outdoor activities rely on their boots to prevent them from slipping. However, choosing the best slip resistant footwear is challenging. Currently, there is no standard test method for evaluating slip resistance of footwear on ice surfaces. The SATRA STM 603 whole shoe tester is used in standard test methods (ASTM International, 2019b, F2913-19; International Organization for Standardization [ISO], 2019, 13287:2019) …

Mise Au Point D’Une Méthode De Mesure Objective De L’Effet D’Occlusion Basée Sur La Voix, Hugues Nélisse, Hugo Saint-Gaudens, Franck Sgard, Olivier Doutres

Rapports de recherche scientifique

Lors de l’utilisation de protecteurs auditifs ou de prothèses auditives, le fait d’obstruer le canal auditif peut engendrer un effet indésirable et désagréable, appelé « effet d’occlusion », qui se manifeste notamment par la sensation que notre propre voix sonne différemment, avec de basses fréquences amplifiées, qu’elle est distordue. L’effet d’occlusion est souvent considéré comme une source d’inconfort qui entraîne parfois les utilisateurs de protecteurs ou de prothèses à mal les utiliser ou encore à simplement les retirer. Dans le cas des travailleurs, par exemple, le retrait des protecteurs auditifs peut les exposer à des niveaux de bruits potentiellement dangereux, …

การประยุกต์ใช้แผ่นที่ปรับค่าความแข็งด้วยลมเข้ากับมือจับแบบง่าย, เจตนิพิฐ อรุณรัตน์

Chulalongkorn University Theses and Dissertations (Chula ETD)

จากแนวคิดการใช้งานผิวหนังเทียมหรืออุปกรณ์ห่อหุ้มเพื่อเพิ่มความปลอดภัยและประสิทธิภาพในการทำงานของหุ่นยนต์ นำมาสู่การพัฒนาผิวหนังเทียมที่ติดตั้งบริเวณมือจับของหุ่นยนต์ โดยผิวหนังเทียมเหล่านี้จะมีค่าความแข็งที่แตกต่างกันตามการใช้งาน วิทยานิพนธ์เล่มนี้นำเสนอการออกแบบและขึ้นรูปแผ่นที่ปรับค่าความแข็งได้ (VSPs) ด้วยความดันลม ซึ่งทำหน้าที่เสมือนเป็นผิวหนังเทียมของมือจับ จากนั้นนำแผ่นดังกล่าวไปทดลองใช้กับมือจับแข็งเกร็งอย่างง่าย เพื่อหยิบจับวัตถุซึ่งไม่ทราบตำแหน่ง รูปทรงและความแข็งที่แน่ชัดด้วยวิธีการควบคุมอิมพีแดนซ์ VSPs สร้างขึ้นจากวัสดุอ่อนนุ่มประเภทซิลิโคน ซึ่งขึ้นรูปโดยใช้การหล่อและเสริมความแข็งแรงด้วยเส้นใยไฟเบอร์ มีโครงสร้างภายในเป็นทรงกระบอกเรียงตัวขนานกัน สามารถควบคุมค่าความแข็งผ่านการควบคุมค่าความดันโดยใช้ปั๊มเข็มฉีดยาร่วมกับตัวควบคุมแผนเลื่อน จากการทดลองประยุกต์ใช้ VSPs ร่วมกับมือจับแข็งเกร็งพบว่า VSPs ช่วยเพิ่มความปลอดภัยและความยืดหยุ่นในการทำงาน เนื่องจากสามารถปรับค่าความแข็งให้เหมาะสมกับการทำงานนั้น ๆ ได้ โดยการปรับค่าความแข็งเพิ่มจะช่วยลดระยะเวลาในการทำงาน หากลดค่าความแข็งจะช่วยเพิ่มความปลอดภัยและความเสถียรในการทำงานแทน

การระบายความร้อนของเเผ่นเรียบด้วยโครงสร้างเชือกดูดซับน้ำ, ชลธิชา แกล้วทนงค์

Chulalongkorn University Theses and Dissertations (Chula ETD)

การศึกษาครั้งนี้มีวัตถุประสงค์เพื่อศึกษาการประยุกต์อุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์ งานวิจัยนี้ได้แบ่งการศึกษาออกเป็น 2 ส่วนด้วยกันคือ การศึกษาส่วนแรกเป็นการทดสอบผลของอุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์จำลอง และการศึกษาในส่วนที่ 2 เป็นการเสนอการประยุกต์อุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์ ซึ่งได้นำเสนอต้นแบบการประยุกต์อุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์โดยมี 3 รูปแบบ รูปแบบที่ 1 คือกรณีติดตั้งบนดาดฟ้าอาคารเรียบโดยใช้ระบบน้ำร่วมกับอาคาร รูปแบบที่ 2 คือกรณีติดตั้งบนดาดฟ้าอาคารเรียบโดยแยกระบบน้ำกับอาคาร และรูปแบบที่ 3 คือกรณีติดตั้งบนหลังคาที่มีความลาดเอียงโดยแยกระบบน้ำกับอาคาร และวิเคราะห์ความคุ้มค่าทางเศรษฐศาสตร์ โดยวิเคราะห์มูลค่าปัจจุบันสุทธิ (NPV) อัตราผลตอบแทนภายใน (IRR) วิเคราะห์ระยะเวลาคืนทุน (Payback Period) และวิเคราะห์ความอ่อนไหวของโครงการ การทดสอบอุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์จำลองแสดงให้เห็นว่าสำหรับกรณีฟลักซ์ความร้อน 205.8, 483.8 และ 661.8 W/m2 สามารถลดอุณหภูมิของแผงได้ถึง 5.9, 8.3 และ 11.3°C ซึ่งประมาณได้เป็นการเพิ่มประสิทธิภาพเซลล์แสงอาทิตย์ 2.95, 4.15 และ 5.65% ตามลำดับ และผลการวิเคราะห์ความคุ้มค่าทางเศรษฐศาสตร์ของประยุกต์อุปกรณ์ระบายความร้อนระเหยน้ำจากผ้ากับเซลล์แสงอาทิตย์ตัวอย่างที่ขนาดการติดตั้ง 6.6 kW ตลอดอายุโครงการ 25 ปี แสดงให้เห็นว่าการติดตั้งในรูปแบบที่ 1 คือกรณีติดตั้งบนดาดฟ้าอาคารเรียบโดยใช้ระบบน้ำร่วมกับอาคาร มีค่า NPV สูงสุด IRR มากสุด และระยะเวลาคืนทุนน้อยสุด ได้แก่ 109,112.11 บาท, 255.33% และ 0.39 ปี ตามลำดับ ในการวิเคราะห์ความอ่อนไหวโครงการที่พิจารณาผลกระทบจากการเปลี่ยนแปลงค่าไฟฟ้า ค่าน้ำ และค่าผลกระทบของอุณหภูมิต่อประสิทธิภาพเซลล์แสงอาทิตย์ พบว่า ค่าผลกระทบของอุณหภูมิต่อประสิทธิภาพที่เปลี่ยนไปส่งผลต่อ NPV, IRR และระยะเวลาคืนทุนมากที่สุด โดยที่การเปลี่ยนแปลงค่าน้ำมีผลกระทบน้อยที่สุด

A Numerical Study Of Flow Past Arrays Of Cylinders At Low Reynolds Number, Woraphon Wannaviroj

Chulalongkorn University Theses and Dissertations (Chula ETD)

Coastal erosion along shorelines has increasingly been prevalent. A popular method for alleviating this problem is to use breakwaters, made of bamboo, known as “bamboo fencing”. The thesis numerically investigates steady, low-velocity flow past several geometrical configurations of bamboo fencings, modelled as array of cylinders using the ANSYS®-Fluent software. The Reynolds number based on incoming flow velocity (U∞), cylinder diameter (D), and fluid kinematic viscosity is Re = 100. Validation is done for mesh convergence and time-step size for the two-dimensional flow past a circular cylinder. For a pair of side-by-side arranged cylinders, it is found that the effect of …

Human-Robot Collaboration Enabled By Real-Time Vision Tracking, Travis Deegan

Electronic Theses and Dissertations

The number of robotic systems in the world is growing rapidly. However, most industrial robots are isolated in caged environments for the safety of users. There is an urgent need for human-in-the-loop collaborative robotic systems since robots are very good at performing precise and repetitive tasks but lack the cognitive ability and soft skills of humans. To fill this need, a key challenge is how to enable a robot to interpret its human co-worker’s motion and intention. This research addresses this challenge by developing a collaborative human-robot interface via innovations in computer vision, robotics, and system integration techniques. Specifically, this …

Test 2090a: John Deere 7r 230, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2085a: John Deere 7r 250, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2179a: John Deere 7r 210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148a Fendt 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1147a Fendt 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …