Mechanical Engineering Commons^™

Mechanical Energy Harvester For Powering Rfid Systems Components: Modeling, Analysis, Optimization And Design, Alireza Babaei

Theses and Dissertations--Mechanical and Aerospace Engineering

Finding alternative power sources has been an important topic of study worldwide. It is vital to find substitutes for finite fossil fuels. Such substitutes may be termed renewable energy sources and infinite supplies. Such limitless sources are derived from ambient energy like wind energy, solar energy, sea waves energy; on the other hand, smart cities megaprojects have been receiving enormous amounts of funding to transition our lives into smart lives. Smart cities heavily rely on smart devices and electronics, which utilize small amounts of energy to run. Using batteries as the power source for such smart devices imposes environmental and …

Multiscale Modeling Of Cardiac Growth And Baroreflex Control, Hossein Sharifi

Theses and Dissertations--Mechanical and Aerospace Engineering

The heart functions within a complex system that adapts its function to any alteration in loading via several mechanisms. For example, the baroreflex is a short-term feedback loop that modulates the heart's function on a beat-to-beat basis to control arterial pressure. On the other hand, cardiac growth is a long-term adaptive response that occurs over weeks or months in response to changes in left ventricular loading. Understanding the mechanisms that drive ventricular growth and biological remodeling is critical to improving patient care. Multiscale models of the cardiovascular system have emerged as effective tools for investigating G&R, offering the ability to …

Anisotropic Material Behavior Of 3d Printed Fiber Composites, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

Literature has shown that 3D printed composites may have highly anisotropic mechanical properties due to variation in microstructure as a result of filament deposition process. Laminate composite theory, which is already used for composite products, has been proposed as an effective method for quantifying these mechanical characteristics. Starting with the analysis of comparing the printing orientation of premanufactured carbon fiber reinforced filament, the mechanical properties of 3D printed objects were examined. The mechanical properties changed not only as a result of machine choice, but how the sample is oriented along the printing bed. The analysis continued with looking at the …

Machine Learning For Advancing Automation And Quality Control In Robotic Welding, Joseph Kershaw

Theses and Dissertations--Mechanical and Aerospace Engineering

Welding is a vital manufacturing process across a diverse range of industries to permanently join metallic components into needed assemblies. Though widely used and studied, the process is not fully understood due to the myriad of interconnected physics that present themselves during the welding process. Electrical, thermal, structural, and fluidic mechanics are simultaneously at work influencing one another to achieve the bonding that manufacturers desire. In addition to general manufacturing issues, such as tool wear or misalignment, micro-level changes to the material structure and composition can have cascading impacts on the final weld. This complexity makes it difficult, if not …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical and Aerospace Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Generalizable And Adaptable Data-Driven Methods For Overcoming Barriers To Practical Industrial Condition Monitoring, Matthew B. Russell

Theses and Dissertations--Electrical and Computer Engineering

The future of smart manufacturing relies on predictive maintenance systems that intelligently minimize expensive downtime through timely assessment of machine condition. Deep Learning (DL) has achieved excellent performance in industrial condition monitoring experiments, but the constraints of the manufacturing environment prevent many algorithms from being practically deployed on the factory floor. Ubiquitous sensing from online machines generates high velocity data streams that require new techniques for efficient transmission and storage. Despite these ever-increasing data lakes, many applications still lack the data needed for training DL fault diagnosis and wear tracking models since most data is unlabeled and only from nominal …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Optimizing Biomechanical Models: Estimation Of Muscle Tendon Parameters And Ankle Foot Orthosis Stiffness, Sepehr Ramezani

Electronic Theses and Dissertations, 2020-2023

The complexity of the human musculoskeletal system presents challenges in accurately identifying its characteristics, particularly due to the presence of redundant actuators on a single joint. Non-invasive measures are necessary to overcome these challenges. Optimization algorithms have emerged as a crucial tool to advance subject-specific musculoskeletal modeling allows a more realistic representation of biomechanical behaviors, enhancing our understanding of human movement and enabling better clinical decision-making. Furthermore, optimization algorithms play a vital role in customizing rehabilitation and assistive devices, such as orthoses and prostheses. The current ankle-foot orthosis (AFO) stiffness measurement methods require bulky, complex designs, and often permanent modification …

Development Of A Permanent Magnet Spherical Motor With 3 Degrees Of Freedom, Eric T. Hanson

All Graduate Theses, Dissertations, and Other Capstone Projects

This research is motivated by the need for actuators capable of delivering precise multiple degrees of freedom (DOF) motion with structure and energy efficiency in numerous applications. Permanent magnet spherical motors (PMSMs) are typical examples that can provide continuous and precise 3 dimensional (3D) rotational motion about a ball joint. The result of this research demonstrates a unique PMSM capable of 3D rotational motion control with high accuracy and bandwidth.

A Kalman filter (KF) sensor fusion method is developed to implement full state estimation of 3-DOF angular displacement and velocity in real time for a PMSM by simultaneously measuring the …

Area Average Surface Transfer Coefficient In Unit Cell Geometries, Benjamin Gabriel Mackey

Masters Theses

"Honeycombs, metal foams, and lattice structures all provide a way to increase heat transfer due to better fluid mixing and larger surface area. Specifically, lattice structures can be a great way to provide heat transfer enhancement due to the ability to customize and optimize the unit cell geometry. In this research, a novel yet simple unit cell geometry is chosen for study. Four different configurations are tested in a lower Reynolds number range, 300–1800: single unit cell, two-unit cells in series, three-unit cells in series, and a 3x3 unit cell array. The Sherwood number of each configuration is found by …

Reducing The Variability And Cost Of Determining The Coefficient Of Friction Of Various Lubricants, James M. Wirth

Honors Theses and Capstones

The Navy requires accurate fastener preloading for many of its fastened applications to protect the safety of the vessel and its personnel, and to ensure proper operation of various components. The preload is based on many properties including fastener materials, fastener geometries, and the coefficient of friction (COF) between mating surfaces. The COF is a critical value in determining the torque-load relationship of a fastener, and is dependent on the contact surface area and the materials in contact, the condition and finish of the contact surfaces, and any lubricant applied in these contact areas. Due to the large amount of …

Nebraska Tractor Test: 2263 John Deere 9r 590 18 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Tractor Test: 2273 John Deere 5130m Powrquad Plus, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Mechanical Design Of A Microwave Imaging Device For Breast Cancer Detection In Mri Scanners, Grace M. Player

Dartmouth College Master’s Theses

This project seeks to develop an updated version of a microwave imaging device for use in conjunction with breast MRI, improving upon existing technology and developing novel concepts for the device. It posits three primary redesign targets for updating the previous system: resizing the system height, making the device more iteration- friendly, and improving the overall manufacturability of the device by replacing custom components with commercially available alternatives. All three of these redesign targets are met in the new design, V2.0. The height is reduced by reducing antenna travel and height, embedding some components, and shortening the tank wall, resulting …

Assessing The Economic Feasibility Of Capturing And Utilizing Carbon Dioxide From Ethanol Production In South Dakota, Makiah Stukel

Electronic Theses and Dissertations

Since the Industrial Revolution, anthropogenic greenhouse gas (GHG) emissions have spiked dramatically, prompting discussions on climate change. Mitigating climate change requires significant reductions in global carbon dioxide (CO2) emissions as CO2 is the most abundant anthropogenic GHG. A process that assists in offsetting the exponential growth in CO2 emissions is carbon capture and storage (CCS). Integrating carbon capture technology into the ethanol industry can provide an economically feasible way to achieve net reductions in CO2 emissions. The proposed work investigates the economic viability of applying CCS technologies to the 16 ethanol facilities in South Dakota (SD) and quantifies the potential …

On The Simulation Of Supersonic Flame Holder Cavities With Openfoam, Zachary Chapman

Electronic Theses and Dissertations

One of the next major advancements in the aerospace industry will be hypersonic flight. However, to achieve hypersonic flight, propulsion systems capable of reaching hypersonic speeds need to be developed. One of the more promising hypersonic propulsion systems is the scramjet engine, however, several problems still need to be explored before reliable scramjet engines can be produced, the biggest being keeping the engine ignited. This has led to the use of flame holder cavities to create a region of subsonic flow within the engine to allow combustion to occur. High experimental costs make the use of computational fluid dynamic (CFD) …

Computer Vision/Ai To Better Understand The Performance Of Agricultural Sprayer Nozzles, Praneel Acharya

Electronic Theses and Dissertations

No abstract provided.

Northrop Grumman Collaboration Project, Nikkia Rae Psomas-Sheridan, Santiago Robles, Ben Elkayam, Benjamin Ulfhake

Mechanical Engineering

The Northrop Grumman Collaboration Project (NGCP) is a collaborative club project sponsored by Northrop Grumman for the students of Cal Poly San Luis Obispo (CPSLO) and Cal Poly Pomona (CPP) to create a fleet of vehicles to aid in the simulated rescue of stranded hiker. The CPSLO club is responsible for delivering an autonomous flight vehicle that can suppress a fire and retrieve a payload. Mechanical Design Team of the CPSLO team was responsible for the design of the frame, electronics housing, and payload and fire suppression systems.

Experimental Uncertainty In Measurements Of Violin Impulse Response, Andrew Piacsek, Seth Lowery

All Faculty Scholarship for the College of the Sciences

Experiments that investigate how an individual musical instrument changes in response to subtle alterations must contend with measurement uncertainty, which typically arises from inconsistencies in the measurement setup. We quantify uncertainty in violin response measurements by measuring bridge admittance and radiatively of a single instrument that is repeatedly removed and reinstalled in our measurement apparatus. From this set of baseline measurements, we calculate the average and standard deviation of admittance and radiativity. The amount of variation observed in the baseline data is compared to the change in bridge admittance that occurred over several days due to a large and abrupt …

Experimental Study For Improving The Productivity Of Laser Foil Printing, Tunay Turk, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This Study Aims to Improve the Productivity of Laser Foil Printing (LFP), Which is a Foil-Based Metal Additive Manufacturing (AM) Process. LFP Uses a Dual-Laser System to Fabricate a 3-Dimensional Part in a Layered Fashion by Performing Four Steps in Each Layer: Spot Welding, Pattern Welding, Contour Cutting, and Edge Polishing, All of Which Performed by Use of Lasers. We Experimentally Examined the Welding and Polishing Steps in This Study to Enhance LFP Productivity. the Jump Speed, Dwelling Duration, and Weld Path of Spot Welding and the Line Welding Speed and Wait Time between Weld Lines of Pattern Welding Are …

Harnessing The Potential Of Fibrous Polyester Composites Meant For Bioactive Medical Devices, Graciela Morales, Heriberto Rodríguez-Tobías, Victoria Padilla-Gainza, Karen Lozano, Daniel Grande

Mechanical Engineering Faculty Publications

Fibrous-based composite polyester mats have gained importance in the biomedical area due to their morphological characteristics and mechanical performance. These materials can be modified by incorporating different inorganic micro- or nano-particles, thus leading to promising potential applications as medical devices with antimicrobial and/or bioactive properties. In this regard, this chapter reports a compilation of different studies related to the development of sub-micron fibers based on two important polyesters for biomedical use, namely poly(3-hydroxybutyrate) and poly(lactic acid). Studies focus on fibers developed through hydrodynamic techniques, namely electrospinning, electrospraying, and centrifugal spinning. The incorporation of zinc oxide or hydroxyapatite on the polyester-based …

Quantitative Response Of Metals Post Heat Treatment, Andrew Elloso

Open Access Master's Theses

This studies the ability to continue using metal assemblies after they have been exposed to significant heat. This is 4130 steel and 17-4 PH stainless steel specifically for industry application.

The metals are being examined in multiple functions. They will be compared in two manners. The first is through dimension and strength pre and post heat exposure on sheet specimen. The second is dynamic response through the Split Hopkinson Pressure Bar (SHPB). The bar samples will be examined at room temperature, post heat treatment, and with induction coil heat exposure.

Genetic Algorithm For Solving A Just-In-Time Inventory Model With Imperfect Rework Implemented In A Serial Multi-Echelon System, Hsien-Chung Tsao, Cheng-Chi Chung, Hsuan-Shih Lee, Chih-Ping Lin, Yan-Yun Tu, Ssu-Chi Lin

Journal of Marine Science and Technology–Taiwan

As global industrial competition intensifies, enterprises can achieve substantial competitive advantages in the supply chain management environment by promptly meeting customer demands and efficiently reducing both supply and demand costs. This paper proposes an inventory model for supply chain optimization that considers uncertain delivery lead times and defective products. Solving the model requires solving a nonlinear mixed-integer problem, which traditionally requires considerable time. Solutions to nondeterministic polynomial-time hard problems with high complexity and difficulty are often obtained using heuristic algorithms. Among these algorithms, genetic algorithms have high efficiency and quality. Therefore, we employed a genetic algorithm to solve the proposed …

An Mrf Model-Based Study On The Effect Of Fishes Upon The Characteristics Of Flow Field Of An Aquaculture Tank, Xian-Ying Shi, Zheng-Zheng Huang, Meng Li, Yinxin Zhou, Xiao-Zhong Ren, Hang-Fei Liu, Shu-Peng Du

Journal of Marine Science and Technology–Taiwan

The study aims to investigate the effect of fish movement on the flow field in the aquaculture tank of a recirculating water aquaculture system. Herein, based on the Navier-Stokes equations and the RNG k-ε turbulence model, the flow field in the aquaculture tank with fish movement was numerically simulated using the multiple reference frame (MRF) model and compared with the numerical simulation results of the fishless aquaculture tank. The results revealed that the overall mean flow velocity in the tank decreased significantly when the fish swam counter-currently with a fixed trajectory, and the overall mean flow velocity increased slightly when …

Occurrence Of Predation Of Juvenile Chum Salmon (Oncorhynchus Keta) By Chub Mackerel (Scomber Japonicus) And Spotted Mackerel (Scomber Australasicus) In Miyako Bay, Iwate Prefecture, Japan, Kei Sasaki, Miwa Yatsuya, Daisuke Shimizu, Daisuke Ojima, Shinji Komatsu

Journal of Marine Science and Technology–Taiwan

In recent years, chub mackerel (Scomber japonicus) and spotted mackerel (Scomber australasicus) have started migrating to the coastal areas off Iwate Prefecture earlier than they did previously, resulting in a geographic overlap between hatchery-bred juvenile chum salmon (Oncorhynchus keta) released at sea and the occurrence of predatory mackerel. To clarify whether the mackerels prey on the juvenile chum salmon, we captured adult mackerels by angling during the period when these species overlap in Miyako Bay, Iwate Prefecture. After capture, the stomach contents of the mackerel were examined using a combination of visual examinations and DNA metabarcoding analysis. As a result, …

Numerical Analysis Of Impact Vibration Based On A Bifurcation Diagram With Two Varying Control Parameters, June-Yule Lee

Journal of Marine Science and Technology–Taiwan

This study investigates impact vibration by using a bifurcation diagram with one or two varying control parameters. Sticking, periodic, and chaotic motions are explored using the Poincaré mapping and impact mapping techniques. A full range of bifurcation diagrams with varying driving frequencies is obtained, and the statistical index of the standard deviation (Std) is used to calculate the impact series in the bifurcation diagrams. The results indicate strong agreement between impact conditions and their corresponding statistical index values for the Std. Subsequently, the Std values for two control parameters of (w, m), (w, c), (w, k), (w, f), and (w, …

A Techno-Economic Analysis To Determine The Levelized Cost Of Hydrogen Generation Through Electrolysis For Humboldt Transit Authority, Humboldt County, California, Deepak Tripathi

Cal Poly Humboldt theses and projects

Abstract

This thesis aims to investigate the techno-economic feasibility of on-site electrolysis-based hydrogen generation for the Humboldt Transit Authority (HTA), focusing on determining the levelized cost of hydrogen (LCOH) for various system configurations and utility rate schedules. The study recommends using a 2.5 MW electrolyzer with the B-20 (T) utility rate schedule along with an E-GT rate supplement provided by PG&E as the most cost-effective solution to meet HTA's projected hydrogen demand. This demand is currently based on the utilization of 11 H₂ fuel cell buses, which is further expected to grow to 21 buses, and estimated public use …

Strategies Automotive Manufacturing Managers Use To Deliver Work In Alignment With Project Milestones, Sashidhar Mr. Sankaranarayanan

Walden Dissertations and Doctoral Studies

Project managers working in manufacturing firms in the automotive industry frequently face challenges such as cost overruns, schedule delays, and scope changes. Project managers often lack effective strategies to ensure that different departments deliver their work in alignment with project milestones, which can negatively affect project success rates. Grounded in the balanced scorecard framework, the purpose of this qualitative single case study was to explore strategies managers in the automotive manufacturing industry used in their different departments to deliver their work in alignment with project milestones. The participants were three project managers who had successfully implemented strategies that reduced the …

Capturing Microstructural Heterogeneity And Predicting Local Transport Phenomena In Pemfc Catalyst Layers: A Comprehensive Network Modeling Approach, Shahriar Alam

Dissertations, Master's Theses and Master's Reports

A unique network architecture that captures the microstructural heterogeneity and predicts the local transport properties of PEMFC catalyst layers is proposed. Separate networks containing numerous cylindrical elements and nodes are generated that represent the solid and pore phase of the catalyst layer. Transport resistances are assigned to the elements while the nodes are volumeless. The networks are interlinked through nodes where local properties are stored. The generated computational grid's macroscopic behaviors (percolation behavior, gas diffusivity, and ion conductivity) will be matched against the experimental data for validation. Diffusion-like transport equations are applied to the networks that provide local water balance, …

An Active Voice Coil Negative Stiffness Vibration Isolator With Application To Mobile 3d Printing, Lucas M. Schloemp

Dissertations, Master's Theses and Master's Reports

Equipment whose performance degrades when exposed to base vibration is often deployed in vibration-rich environments. Using 3D printers in mobile applications, such as vehicles and ships, are typical examples where the extruder and bedplate are easily excited by base vibration. A versatile active vibration isolator is considered in this thesis constructed using a voice coil actuator and a laser displacement feedback sensor to achieve a wide range of dynamic response characteristics, including negative stiffness. This approach permits transmissibility shaping to meet band-limited base isolation requirements without active damping vibration control. A combination of simulation and hardware validation is used to …