Mechanical Engineering Commons^™

An Effectiveness - Based Analysis Of Ground Coupled Heat Exchangers, Chou Shen

Masters Theses

"This thesis develops a theoretical framework, termed [Effectiveness] - BLU, to characterize the relation between temperatures, thermal contact and borehole length as it relates to the heat transfer processes in ground coupled heat exchangers used for ground source heat pump systems.

Borehole outflow temperature depends on the inflow temperature, the heat imposed on the borehole and the temperature history of the ground. In addition, variation of outflow temperature influences inflow temperature, even for the case of constant heat pump load. Because of this kind of feedback, the borehole inflow temperature may not be constant even with a fixed building load. …

Additive Manufacturing Laser Deposition Of Ti-6al-4v For Aerospace Repair Application, Nanda Kumar Dey

Masters Theses

"Parts or products machined from high performance metals are very expensive, partly due to the processing complexities during manufacturing. Therefore, many high performance metal parts users, such as the aerospace industry, mold/die casting industry, heavy machinery consumers etc., extend the service of these damaged parts by employing repair or remanufacturing technology. The research objective is to use laser deposition and machining processes to repair titanium parts.

This thesis discusses a new way of approach for developing a repair process for Ti-6Al-4V for the aerospace industry using Laser Metal Deposition (LMD). The repairs were conducted in a multi-axis hybrid manufacturing systems …

Microstructure, Quasi-Static, And High-Strain Rate Dynamic Characterization Of Metakaolin And Fly Ash Based Geopolymers For Structural Applications, Damian Lee Stoddard

Electronic Theses and Dissertations

Geopolymers are a class of rapid setting cementing systems that have been used as mortar or additives in concrete mixes to improve properties. Several types of geopolymer systems such as metakaolin and fly ash based geopolymers are widely used, and are available in different mixture proportions [1, 2]. Metakaolin (Al2Si2O7), a dehydroxylated form of Kaolinite (Al2Si2O5(OH)4) clay readily available from many sources, provides several benefits whenadded to a concrete mix design or used as a mortar system, including durability, freeze/thaw, acid resistance, and high temperature resistance [3]. Class F fly ash-based mortar geopolymers provide added fire retardation, reduces crack formation, …

Optimization Of Wind Fence Enclosures For Infrasonic Wind Noise Reduction, Johnpaul Russell Abbott

Electronic Theses and Dissertations

A large porous wind barrier enclosure has been built and tested to optimize wind noise reduction at infrasonic frequencies between 0.01-10 Hz in order to develop a technology that is simple, cost effective, and improves upon the limitations of pipe and porous hose arrays. The effects of varying the fence's porosity, modifying its top condition and bottom gap, doubling the height and diameter, and adding a secondary wind barrier were investigated. A simple mathematical model which estimates the wind noise measured at the center of the enclosure was derived based on the measured turbulence and velocity profiles measure outside the …

Computational And Experimental Study On Vertical Axis Wind Turbine In Search For An Efficient Design, Mohammad M. Bashar

College of Graduate Studies: Theses & Dissertations

Wind alone can fulfill most of the energy requirement of the world by its efficient conversion in to energy. Though Horizontal Axis Wind Turbine (HAWT) is more popular but needs high wind speed to generate energy. On the other hand Vertical Axis Wind Turbine (VAWT) needs low wind speed and can be installed anywhere which are some of the reasons for this research. The main objective of this research is to improve the design and performance of VAWT to make it more attractive, efficient, durable and sustainable. For a VAWT the blades perform the main role to extract energy from …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

College of Graduate Studies: Theses & Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …

Design And Development Of A High Velocity Oxy-Fuel Thermal Spray Gun, Luisa Alejandra Cabrera Maynez

Open Access Theses & Dissertations

The High Velocity Oxy-Fuel (HVOF) system is a highly promising technique for the production of thermal barrier coatings (TBCs), helpful in the protection of materials exposed to extreme thermal and corrosive environments. Coatings generated through the technique are employed in industrial settings to extend product life, increase performance and decrease maintenance costs. HVOF yields lower porosity and higher adhesion TBCs when compared to similar thermal spraying processes. Though gas fuelled systems are the norm in this technique, there is a recent interest in employing liquids due to their low cost and increased deposit density. Economic and highly scalable, HVOF process …

Fused Deposition Modeling (Fdm) Fabricated Part Behavior Under Tensile Stress, Thermal Cycling, And Fluid Pressure, Mohammad Shojib Hossain

Open Access Theses & Dissertations

Material extrusion based additive manufacturing (AM) technology, such as fused deposition modeling (FDM), is gaining popularity with the numerous 3D printers available worldwide. FDM technology is advancing from exclusively prototype construction to achieving production-grade quality. Today, FDM-fabricated parts are widely used in the aerospace industries, biomedical applications, and other industries that may require custom fabricated, low volume parts. These applications are and were possible because of the different production grade material options (e.g., acrylonitrile butadiene styrene (ABS), polycarbonate (PC), polyphenylsulfone (PPSF), etc.) available to use in FDM systems. Recent researchers are exploring other material options including polycaprolactone (PCL), polymethylmethacrylate (PMMA), …

Experimental Evaluation Of Flame Stability And Pollutant Emissions From A Multi-Tube Fuel Injector, Sarzina Hossain

Open Access Theses & Dissertations

According to US Energy Information Administration coal is predicted to be the dominant source of power production in the United States until 2035. With fifty percent of the electricity generated in the United States originating from coal, the US produces close to 2 billion tons of CO2 per year from coal-burning power plants. The Integrated Gasification Combined Cycle (IGCC) offers a cleaner way to generate electricity-using coal. IGCC is a process where the feedstock is gasified and converted into to syngas (CO-H2) which can then be used as a fuel source to power energy-generating gas turbines. Compared to other hydrocarbons, …

Effect Of Multi-Tube Injector Geometry On Flame Stability And Nox Emission In A High Pressure Gas Turbine Combustor, Sudipa Sarker

Open Access Theses & Dissertations

Future generation gas turbine combustors for power production are expected to have the capability of operating on high hydrogen content fuels. To ensure the implementation of high hydrogen content (HHC) fuel in a power generation unit without negotiating with operational or emission advantages, the study of the flame stability regime and behavior of (HHC) fuel under gas turbine condition leads to the necessity of the development of an optically accessible high-pressure combustor. This Dissertation first presents the design of an optically high-pressure combustor facility based on 500 kW power and 1.5 MPa pressure which is the representative pressure of a …

Integrated Sustainability Decision-Making Framework, Michael Paul Cole

Open Access Theses & Dissertations

The Integrated Sustainability Decision-Making Framework (ISDMF) is an 'ideal case' framework developed at the University of Texas El Paso (UTEP) from 2012 to present to provide the most comprehensive and concise sustainability strategy and decision-making template available.

Sustainable decision-making improves community Quality of Life, but is often beyond the reach of the majority. A framework that is most approachable, actionable, and adoptable can accelerate convergence on and continued operation of a sustainable solution. Research confirms that published frameworks continuously emerge, and are infinite in number. Iterations benefit from prior work, and contribution occurs when an 'ideal case' is envisioned, best …

An Experimental Investigation On Liquid Methane Heat Transfer Enhancement Through The Use Of Longitudinal Fins In Cooling Channels, Manuel De Jesus Galvan

Open Access Theses & Dissertations

In the past years, hydrocarbon fuels have been the focus of attention as the interest in developing reusable, high-performing liquid rocket engines has grown. Liquid methane (LCH4) has been of particular interest because of the cost, handling, and storage advantages that it presents when compared to currently used propellants. Deep space exploration requires thrusters that can operate reliably during long-duration missions. One of the challenges in the development of a reliable engine has been providing adequate combustion chamber cooling to prevent engine failure. Regenerative (regen) cooling has presented itself as an appealing option because it provides improved cooling and engine …

Performance Evaluation Of A Lox-Lch4 Reaction Control System Thruster, Jose Luis Mena

Open Access Theses & Dissertations

The following work outlines the assessment and characterization of a 2 to 8 lbf LOX - LCH4 reaction control thruster. The evaluation includes both experimental tests and preliminary computational analysis. Testing was conducted at O/F values ranging from 1.0 to 3.0; however, future testing will evaluate the thruster at higher and intermediate mixture ratios. The test setup includes three main systems: cryogenic propellant delivery system, thrust measurement capability, and automation and controls system. Propellant flow control is achieved through the use of in-house designed cavitating venturis. Autonomous system control is accomplished via a LabVIEW program interface and DAQ system. This …

Synthesis, Microstructure And Performance Evaluation Of Gadolinium Incorporated Cobalt Ferrite Ceramics, Md Taibur Rahman

Open Access Theses & Dissertations

Spinel structured ferrites exhibit remarkable properties and phenomena, which are attractive for application in sensors and actuators, magneto-electronics, and electrochemical energy storage devices. Among spinel ferrites, cobalt ferrite CoFe₂O₄ (CFO) has attracted remarkable attention and widely studied because of their electro-magnetic properties, chemical stability and mechanical hardness. The properties and phenomena of CFO ceramics are dependent on microstructure and chemistry, which in turn depend on the synThesis processes and conditions employed for fabrication. Generally exact chemical composition, processing temperature, reactive or processing atmosphere (if any) and the ions that substitute Fe³⁺/Fe²⁺ ions dictate the …

Hydrogen Generation From Ammonia Borane And Water Through The Combustion Reactions With Mechanically Alloyed Al/Mg Powder, Daniel Rodriguez

Open Access Theses & Dissertations

Finding and developing a safe and effective method for hydrogen storage is integral to its use as an alternative source of energy. The goal of the studies described in this Thesis was to investigate the feasibility of developing combustible hydrogen-generating compositions based on ammonia borane and novel energetic materials such as nanocomposite and mechanically alloyed reactive materials, recently obtained by Prof. Edward Dreizin's team at the New Jersey Institute of Technology (NJIT). Such compositions could be stored for long time and release hydrogen on demand, upon ignition. The first phase of the research included thermodynamic calculations for combustion of ammonia …

Design Optimization Of The Heat Transfer Model For A High Heat Flux Test Facility, Linda Hyemin Yoon

Open Access Theses & Dissertations

There are a variety of fuels that are utilized for space applications and in recent years, environmentally friendly fuels have been of interest. In the case of bipropellant rocket systems, hydrocarbon fuels have come to the attention of scientists and engineers. In particular, liquid methane was of interest in this study because of its physical and chemical advantages over other fuels, such as liquid hydrogen. Rocket engines rise to very high temperatures and to avoid catastrophic mechanical failure, a cooling system must be implemented within the engine to cool the walls. To get a better understanding of the fluid flow …

A Circuit-Based Algorithm For Two-Phase Flow At The Pore Scale In Porous Media, Todd Dorethy

Open Access Theses & Dissertations

Models of two-phase flow in porous media are of practical interest in many fields of science and engineering such as in oil recovery and hydrology. For this class of problem, an immiscible fluid is injected into a single-phase, porous medium to evict its valuable, native fluid. Because the aim is to amass as much of the indigenous fluid as possible, models attempt to output reliable flow regime patterns depicting how well the invading fluid displaces the native fluid.

Flow regime patterns generally depend upon the geometry of the domain, stimulation at the boundaries, and properties of the invading and native …

An Experimental Investigation Of The Cooling Channel Geometry Effects On The Internal Forced Convection Of Liquid Methane, Adrian Trejo

Open Access Theses & Dissertations

Rocket engine fuel alternatives have been an area of discussion for use in high performance engines and deep spaceflight missions. In particular, LCH4 has showed promise as an alternative option in regeneratively cooled rocket engines due to its non-toxic nature, similar storage temperatures to liquid oxygen, and its potential as an in situ resource. However, data pertaining to the heat transfer characteristics of LCH4 is limited. For this reason, a High Heat Transfer Test Facility (HHTTF) at the University of Texas at El Paso's (UTEP) Center for Space Exploration Technology and Research has been developed for the purpose of flowing …

Numerical Prediction Of Collection Efficiency Of A Personal Sampler Based On Cyclone Principle, Antara Badhan

Open Access Theses & Dissertations

A personal bioaerosol sampler is a self-contained, operation flexible, high-efficient device for indoor air quality (IAQ) and health risk exposure monitoring and measurement. Bio-aerosols such germ-laden viruses, microbial species, airborne microorganisms and volatile organic compounds (VOC) are sucked into the sampler and are deposited on the inner wall surface based on cyclone principal. The major concern with bio-aerosol samplers is the collection efficiency. In this study, we used computational fluid dynamics (CFD) tools to evaluate key design parameters, specifically the inlet tube angle and collection tube inner wall roughness. 3D incompressible turbulent flow was simulated using commercial software ANSYS FLUENT. …

Gas-Solid Bed Hydrodynamics Of Non-Spherical Particles, A S M Raufur Rahim Chowdhury

Open Access Theses & Dissertations

Gas-solid beds are ubiquitous in industrial and energy production applications. Examples include fluidized beds, which are used in many systems such as in Integrated Gasification Combined Cycle (IGCC) power plants or in chemical looping systems. These examples and others involve complicated interactions between each phase of reactants in the system. The motivation of this work stems from the need for a better understanding of bed hydrodynamics in existing energy systems; results from this work can be used directly in software such as Fluent to more accurately predict flow behaviors of gas and solid phases. The experimental data are collected from …

A Study On The Role Of Physical Models In The Mitigation Of Design Fixation, Vimal Viswanathan, Olufunmilola Atilola, Nicole Esposito, Julie Linsey

Faculty Publications, Mechanical Engineering

Designers implement a variety of models and representations during the design process, yet little is known about the cognitive impacts of various representations. This study focuses on how physical models can assist novices in mitigating design fixation on undesirable features. During idea generation, designers tend to fixate on examples they encounter or on their own initial ideas. The first hypothesis states that designers tend to duplicate features of provided examples. The second hypothesis states that this fixation can be mitigated with appropriate warnings. The last hypothesis is that building and testing physical models can help designers in mitigating fixation. To …

Crack Self-Healing In Sic/Spinel Nanocomposite, Fariborz Tavangarian

LSU Doctoral Dissertations

Spinel is one of the best known and widely used ceramic materials. It has good thermal shock resistance, high chemical inertness in both acidic and basic environments, excellent optical and dielectric properties, high strength at both elevated and normal temperatures, and has no phase transition up to the melting temperature (2135°C). Spinel is used in the metallurgical, electrochemical, and chemical industrial fields. It has also found some applications in dentistry, catalyst supports, humidity sensors, reinforcing fibers, photoluminescent materials, etc. One of the limitations of spinel ceramic is its brittleness. Furthermore, at high temperature applications, a rapid heating or cooling can …

Meso-Scale Analysis Of Deformation Induced Heating In Granular Metalized Explosives By Piston Supported Waves, Sunada Srinath Nagamani Chakravarthy

LSU Doctoral Dissertations

Shock sensitivity of heterogeneous explosive composites is dependent on the formation of hot-spots which are small regions of elevated temperatures within the material. Changes in the initial meso-structure (i.e. packing density, composition, particle size and shapes) of the explosives can significantly alter the hot-spot fields in the material and thereby affect its shock sensitivity. In this study, an explicit, 2D, Lagrangian finite and discrete element technique is used to numerically simulate the deformation induced heating of granular mixtures of explosive (HMX), and metal (Al) particles due to piston supported uniaxial deformation waves (400 ≤ Up ≤ 800 m/s). A number …

The Effects Of Asymmetric Micro Ratchets On Pool Boiling Performance, Lance Austin Brumfield

LSU Doctoral Dissertations

Nucleate boiling is an attractive method for achieving high heat flux at low superheat temperatures. It is frequently used for industrial applications such as heat exchangers and is being considered to cool advanced central processing units (CPU) which produce heat fluxes on the order of 1 MW/m2 and are becoming increasingly less efficient to cool via forced conduction of air. The issue with implementing nucleate boiling as a cooling mechanism lies in the difficulty of quantifying the numerous and complex mechanisms which control the process. A comprehensive nucleate boiling model has yet to be formulated and will be required in …

Molecular Dynamics Simulations Of Pure Polytetrafluoroethylene Near Glassy Transition Temperature For Different Molecular Weights, Rawan Al-Nsour

Theses and Dissertations

Fluoropolymers are employed in countless end-user applications across several industries. One such fluoropolymer is polytetrafluoroethylene. This research is concerned with studying and understanding the thermal behavior of polytetrafluoroethylene. Such understanding is critical to predict its behavior in diverse service environments as the polymer ages and for allowing bottom up design of improved polymers for specific applications.

While a plethora of experiments have investigated the thermal properties of polytetrafluoroethylene, examining these properties using molecular dynamics simulations remains in its infancy. In particular, the current body of molecular dynamics research on polytetrafluoroethylene has primarily focused on studying polytetrafluoroethylene phases, its physical nature, …

Standoff Methods For The Detection Of Threat Agents: A Review Of Several Promising Laser-Based Techniques, J. Bruce Johnson, Susan D. Allen, Jonathan Merten, Lewis Johnson, Daniel Pinkham, Scott W. Reeve

Publications

Detection of explosives, explosive precursors, or other threat agents presents a number of technological challenges for optical sensing methods. Certainly detecting trace levels of threat agents against a complex background is chief among these challenges; however, the related issues of multiple target distances (from standoff to proximity) and sampling time scales (from passive mines to rapid rate of march convoy protection) for different applications make it unlikely that a single technique will be ideal for all sensing situations. A number of methods for spanning the range of optical sensor technologies exist which, when integrated, could produce a fused sensor system …

Electrospinning Applications Air Filtration And Superhydrophobic Materials, Negar Ghochaghi, Adetoun Taiwo

Graduate Research Posters

Electrospinning is a widely applicable technique that generates non-woven fibers in the micro and nano range. In this project two of its applications are highlighted namely filtration media and enhancement of wettability. The first project demonstrates that electrospinning can be used to produce new fiber filtration media with controlled microstructure. The bimodal and unimodal orthogonal and random filters were made and characterized against their filtration efficiency and pressure drop. Figure of Merit (FOM) was also calculated and discussed. It is shown that the FOM increases when the electrospun fibers are arranged into alternating layers of aligned course and fine fibers. …

System-Level Simulation Of A Solar Power Tower Plant With Thermocline Thermal Energy Storage, Scott M. Flueckiger, Brian D. Iverson, Suresh V. Garimella, James E. Pacheco

Faculty Publications

A thermocline tank is a low-cost thermal energy storage subsystem for concentrating solar power plants that typically utilizes molten salt and quartzite rock as storage media. Longterm thermal stability of the storage concept remains a design concern. A new model is developed to provide comprehensive simulation of thermocline tank operation at low computational cost, addressing deficiencies with previous models in the literature. The proposed model is then incorporated into a system-level model of a 100 MWe power tower plant to investigate storage performance during long-term operation. Solar irradiance data, taken from measurements for the year 1977 near Barstow, CA, are …

Modelling Of Biomass Gasification Integrated With A Solid Oxide Fuel Cell System, Wayne Doherty

Doctoral

Biomass is of major interest as a renewable energy source in the context of climate change and energy security. Traditional biomass conversion technologies achieve low electrical efficiencies. Biomass gasification (BG) coupled with fuel cells offer higher efficiencies. Gasification is a process in which a carbonaceous fuel is converted to a combustible gas. It occurs when a controlled amount of oxidant is reacted at high temperatures with available carbon in a fuel within a gasifier. Two technologies (circulating fluidised bed air gasification and dual fluidised bed steam gasification) were modelled. Solid oxide fuel cells (SOFCs) are well suited to integration with …

Combustion Visualization And Particulate Matter Emission Of A Gdi Engine By Using Gasoline And E85, Po-I Lee

Wayne State University Dissertations

In order to increase engine efficiency as well as to reduce emission, optimizing combustion is always the challenge in research and product development. Gasoline direct injection (GDI) engines have been popularized due to its higher power density, fuel efficiency, and the possibility for advanced engine technologies over conventional port-fuel-injection (PFI) gasoline engines. However, many issues are heavily investigated, such as air-fuel mixing preparation, fuel wall-wetting, higher HC and PM emissions, catalytic convertor efficiency, knocking, and pre-ignition. Besides, advanced technologies represent higher production cost.

Because of the limited resource of petroleum-based fuels, ethanol is deemed as the alternative fuel for gasoline …