Mechanical Engineering Commons^™

Effect Of Structural Variations On Thermal Deformation Of Single Curvature Composite Sandwich Panels, Brady C. Lotz

Mechanical and Aerospace Engineering Theses - Archive

Composite structures cured at a high temperature in a contoured female mold have a tendency to deform or spring-in when brought down to room temperature from cure temperature. This thesis investigates the effects of various structural parameters on the spring-in of the curved shape of a composite sandwich panel due to thermal deformation. A finite element model of a single curved composite sandwich panel is developed using 3D shell elements and validated against other published articles and classical lamination theory. Using a control structure of AS4/3501-6 carbon/epoxy with half inch Nomex honeycomb core with a layup of [0°/90°/0°/90°/Core/90°/0°/90°/0°]T, structural parameters …

Performance Evaluation Of Plate-Fin And Pin-Fin Heat Sinks For The Application Of Oil Immersion Cooling And Design Optimization Of Dynamic Cold Plate For The Application Of Warm Water Cooling, Parth Jayeshkumar Soni

Mechanical and Aerospace Engineering Theses - Archive

In IT industries, to keep server rooms and data centers cool is a constant challenge for hardware developers and the cooling solution providers. Air cooling is the most widely used approach for thermal management of servers in data centers from many years. However, the scenario is changing gradually as the computational ability of data center is increasing exponentially. Because of increasing computational ability, the heat generated by the servers is increased in such amount that air cooling is not as efficient as it was before. Hence, alternative cooling system is required. In 1970’s the idea of liquid cooling was introduced. …

Control Strategies For Air-Side Economization, Direct And Indirect Evaporative Cooling And Artificial Neural Networks Applications For Energy Efficient Data Centers, Abhishek Guhe

Mechanical and Aerospace Engineering Theses - Archive

The skyrocketing growth in data centers, facilities that house information technology (IT) equipment for storage, management and distribution of data while striving for 24/7/365 operation with 100% up-time, has accounted for 1.3% of global energy use. A significant portion of data center energy is dedicated to removing the heat generated by IT equipment to maintain safe operating conditions and optimum computing performance. Energy efficient cooling of data center is of vital importance. One of the options for significantly cutting the cooling cost is the use of air side economization (ASE), Indirect evaporative cooling (IEC) and Direct evaporative cooling (DEC) without …

Optimization Of Air Cooled Portion In A Server With Water Cooled Micro-Processors, Neha Inamdar

Mechanical and Aerospace Engineering Theses - Archive

A Data center is the heart of our associated world. It is a facility that houses computer systems and related components. According to IDC, because of enormous increment in pattern of IoT (Internet of Things) and distributed computing the introduced limit of server farm workloads will increment by around 750% around 2014 and 2019. Data center spaces can consume up to 100 to 200 times as much power as standard office spaces. With such huge influence utilization, they are prime focuses for vitality proficient outline measures that can spare cash and lessen power use. In a regular Data center with …

A Study Of Electrical Double Layer Structure Over A Corroding Steel Surface In Sea Water, Pratik Babanrao Kale

Mechanical and Aerospace Engineering Theses - Archive

Corrosion is a natural deterioration phenomenon that throws profound adverse effects on the performance of structural steel in marine applications. Seawater consists of various corrosive components such as chlorine ions, sulphate ions and many more. These chemical components are mainly responsible for the corrosion phenomenon. Even though their bulk concentrations are known, their local concentrations and distribution in the vicinity of a steel surface where the corrosion occurs are yet unclear. Without the knowledge, would any approach to deal with the corrosion be empirical, at best. The main objective of the present thesis is to investigate the interfacial structure of …

Optical Analysis And Fabrication Of Micro And Nanoscale Plasmonically Enhanced Devices, Avery M. Hill

Mechanical Engineering Undergraduate Honors Theses

Plasmonic nanostructures have been shown to act as optical antennas that enhance optical devices due to their ability to focus light below the diffraction limit of light and enhance the intensity of the incident light. This study focuses on computational electromagnetic (CEM) analysis of two devices: 1) GaAs photodetectors with Au interdigital electrodes and 2) Au thin-film microstructures. Experiments showed that the photoresponse of the interdigital photodetectors depend greatly on the electrode gap and the polarization of the incident light. Smaller electrode gap and transverse polarization give rise to a larger photoresponse. It was also shown that the response from …

Time-Of-Flight Based Sonic Speed Measurements For Cold Gas Thruster Development, Brandon W. Kempf

Mechanical Engineering Undergraduate Honors Theses

The purpose of this thesis is to explore an experiment developed for validating the usage of a gaseous solution of water and propylene glycol for cold gas propulsion. The experiment involves a “Time of Flight” method of calculating the speed of sound in the gas and the corresponding specific heat ratio using a copper tube, two MEMS microphones, a piezoelectric speaker, and data-acquisition hardware. The experiment was calibrated using the known thermodynamic properties of air. The accuracy of the experiment was found to be within 0.6% for calculations of the speed of sound in air and within 1.0% of the …

Atomic Force Microscopy Based Dna Analysis, Drew Creighton

Mechanical Engineering Undergraduate Honors Theses

This report explores dry and wet scanning of a surface and DNA pickup using an AFM, as well as fluorescent staining of DNA. Dry and wet scans of DNA were obtained using a cantilever AFM tip in tapping mode. Dry scans were found to be clearer than wet scans; however, the drying process was found to decrease the thickness of DNA 2–4 times less than its original thickness. Alternately, wet scans were found to be less clear than dry scans and introduced more noise into the images obtained. Additionally, DNA kept its initial thickness during wet scanning. DNA was capable …

Polytetraflouroethylene Thin Coatings For Tribological Applications, Samuel L. Jenkins

Mechanical Engineering Undergraduate Honors Theses

Mechanical components with lower coefficients of friction decrease the amount of energy dissipated by the system due to friction. Coating these components would decrease the coefficients of friction between surfaces without sacrificing the strength of the components. A polytetrafluoroethylene (PTFE) layer adhered through a polydopamine (PDA) layer on a steel substrate will reduce the coefficient of friction on the substrate surface. This paper discusses different methods for attempting to increase the uniformity of the PDA layer as well as decrease the PDA coating time. Methods for increasing uniformity include using a particle disperser instead of a magnet stir rod, changing …

Influence Of Hydrogen Concentration And Distribution On Fracture In Nickel, Arturo Sucre Melfi

Mechanical Engineering Undergraduate Honors Theses

Hydrogen embrittlement is a main factor in the premature failure of metals under stress. Using molecular dynamics (MD) simulations, two models were built in order to study how the presence of hydrogen at interstitial positions within the nickel lattice affects how it fractures. The first model was a 3D single crystal nickel sample, while the other was the same nickel model but with different concentrations and locations of hydrogen positioned at or near the crack tip. Two aspects of fracture were studied and compared between the different simulations: the crack tip velocity and dislocation nucleation from the crack tip. Analysis …

Low-Cost Inkjet Process For 3-D Printing, Christopher T. Schmitt

Mechanical Engineering Undergraduate Honors Theses

This paper presents a low-cost 3-D inkjet process design. Current commercially available 3-D inkjet printers (e.g., Objet Connex) that are capable of multi-material printing are expensive and out-of-reach of most consumers. While fused deposition modeling and other extrusion-based hybrid processes for multi-material printing are becoming available, these techniques are slow and relatively low-resolution. This research attempts to fill the gap by presenting a simple and low-cost solution to bring desktop 3-D inkjet to the community by utilizing components from an Epson inkjet printer. The mechanical system was designed with maximum utilization of the Epson carriage system with the addition of …

Techno-Economic Assessment Of Micro-Algae Production Systems, Justin Hoffman

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Global oil consumption is rising at an unprecedented rate renewing interest in alternative fuels. Micro-algae represents a promising feedstock due to inherent advantages such as high solar energy efficiencies, large lipid fractions, and utilization of various waste streams including industrial flue gas. Current technological challenges have limited the commercial viability of microalgae based biofuel production systems. This study directly evaluates and compares the economic viability of biomass production from two different open cultivation platforms, 1) algal turf scrubbers and 2) open raceway ponds. Modular sub-process models were developed and leveraged for the economic comparison of the systems on the metrics …

Analysis Of An Artificial Tailplane Icing Flight Test Of A High-Wing, Twin-Engine Aircraft, Shehzad Maksudahmad Shaikh

Mechanical and Aerospace Engineering Theses - Archive

The US Air Force Flight Test Center (AFFTC) conducted a civilian, Federal Aviation Administration (FAA) sponsored, evaluation of tailplane icing of a twin-turboprop business transport at Edwards Air Force Base. The flight test was conducted to evaluate ice shape growth and extent of ice on the tailplane for specific weather conditions of Liquid Water Content (LWC), droplet size, and ambient temperature. This work analyzes the flight test data comparing the drag for various tailplane icing conditions with respect to a flight test verified calibrated aircraft model. Although less than a third of the test aircraft was involved in the icing …

A Mesh Based Boom To Stop Oil Spread, Bharathram Visweswaran

Mechanical and Aerospace Engineering Theses - Archive

In this work, we develop a new boom to separate oil and water. In a commonly used boom, a membrane that has no pores is normally used to block oil spread. Since this membrane also blocks water flow, high pressure is easy to build on such a membrane to break or damage it. To solve this problem, in the new boom, the membrane is replaced with a hydrogel-coated mesh. The hydrogel-coated mesh has dual properties of superhydrophilicity and superoleophobicity. Accordingly, water can still go through the mesh, while oil cannot. Subsequently, liquid pressure on the mesh is reduced. In this …

Analysis Of Electric Double Layer Structure Formed During Corrosion Of Steel Pipes Carrying Potable Water, Tanmay Sanjeev Gupte

Mechanical and Aerospace Engineering Theses - Archive

Corrosion of steel pipes carrying drinking water is a universal issue. It affects human health as the corrosion sediments in these pipes can be toxic and unfit for consumption. Further, the amassing of the corrosion products can lead to operational difficulties. Drinking water consists of anions like carbonate, hydroxides and chloride ions which are responsible for the corrosion process. In such types of aqueous corrosion, there is an interfacial region formed between the corroding metal and the bulk of the aqueous environment. This interfacial region is called the Electrical Double Layer. In this article, we direct to study the effects …

Reliability Challenges In Airside Economization And Oil Immersion Cooling, Jimil Manojbhai Shah

Mechanical and Aerospace Engineering Theses - Archive

The Datacom facility which comprises rooms or closets used for communication, computers/servers or electronic equipment requires cooling unit which consumes 31% (23% HVAC cooling + 8% HVAC fans) of overall energy. The ASHRAE TC9.9 subcommittee, on Mission Critical Facilities, Data Centers, Technology Spaces, and Electronic Equipment, has suited the data center’s executives by permitting brief period outings of the environmental conditions outside the prescribed temperature-humidity range, into passable extents A1-A4. To comprehend the expanding server densities and the required cooling vitality costs, data center operators are falling back on cost cutting measures. For instance, they are not firmly controlling the …

Harvesting Of Water From Fog Using Sponges, Jae Jun Lee

Mechanical and Aerospace Engineering Theses - Archive

Supervising Professor: Cheng Luo A sponge has porous structures. It is capable of both storing and transmitting water. In this work, we explored the possibility of applying three different types of sponges to collect fog. We also compared their fog-collection efficiencies with that of a typical Raschel mesh that is widely used in the field to collect fog. We found that, for three different fog speeds, the fog-collection efficiencies of three tested sponges were 39% to 93% those of the typical Raschel mesh, indicating that the sponges could serve as alternative fog collectors when well-developed collectors were not available. Sponge …

Pedicle Lengthening Spacer, David S. Wood

Undergraduate Honors Capstone Projects

In the lumbar region of the spine, the spinal cord travels through a small hole in your vertebrae called the spinal canal. There is a medical condition where the spinal canal becomes restricted. This condition is called stenosis. There are several reasons for this pinching of the spinal column. These include the growth of bone spurs, the accumulation of ligaments in the canal, or a genetic trait. When these occur in the lower five vertebrae (the lumbar region), it is called lumbar stenosis. The symptoms of Lumbar Stenosis are shooting pain through the legs, especially during activity, and feelings of …

Xhab Microgravity Food Growth Chamber, Nathan I. Stacey

Undergraduate Honors Capstone Projects

NASA and other organizations are preparing to send humans deeper into space, including a NASA manned mission to Mars in the 2030s, in order to learn more about our universe and the origin of life and to ensure the survival of the human race. Long journeys in space require efficient, dependable, and sustainable methods to provide for astronauts' metabolic needs such as oxygen, water, and food. In order for microgravity plant growth chambers to become a viable solution, several challenges encountered by past growth chambers must be resolved.

One problem with existing space food growth chambers is hypoxia, or lack …

Investigating The Effect Of Capping Layers On Final Thin Film Morphology After A Dewetting Process, Benjamin C. White

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nanoparticles on a substrate have numerous applications in nanotechnology, from enhancements to solar cell efficiency to improvements in carbon nanotube growth. Producing nanoparticles in a cheap fashion with some control over size and spacing is difficult to do, but desired. This work presents a novel method for altering the size and spacing of nickel and gold nanoparticles. Dewetting is a methodology to reduce thin films to an ensemble of discrete droplets. The introduction of alumina capping layers to thin nickel films during a pulsed laser-induced dewetting process has yielded reductions in the mean and standard deviation of radii and pitch …

Development Of A Three-Dimensional High-Order Strand-Grids Approach, Oisin Tong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The strand-Cartesian grid approach is a unique method of generating and computing fluid dynamic simulations. The strand-Cartesian approach provides highly desirable qualities of fully-automatic grid generation and high accuracy. This work focuses on development of a high-accuracy methodology (high-order scheme) on strand grids for two and three dimensions.

In this work, the high-order scheme is extended to high-Reynolds number computations in both two and three dimensions with the Spalart-Allmaras turbulence model and the Menter SST turbulence model. In addition, a simple limiter is explored to allow the high-order scheme to accurately predict discontinuous flows.

Extensive verification and validation is conducted …

The Effects Of Ball Interactions On The Dynamic Behavior Of A Ball Balancer Rotating At Speeds Above The Translational Resonant Frequency Of The System., Gregory A. Dedow

Electronic Theses and Dissertations

Many applications are inherently rotational in nature. These applications range from industrial products to consumer products. As seen in a traditional frequency response plot, the motion of a rotating imbalance does not approach zero as the forcing frequency is increased. Unlike a traditional forced mass spring oscillator, the motion of the rotating imbalance approaches some non-zero value. To account for this residual motion, some systems utilize a balancing device to reduce this motion. These balancing devices can be passive or active, depending on the design considerations. This paper will focus on the traditional, passive ball-type balancer due to its simplicity …

Mechanical Properties And Microstructure Evolution Of 17-4 Ph Stainless Steel Processed By Laser-Powered Bed Fusion., Harish Irrinki

Electronic Theses and Dissertations

Laser powder bed fusion (L-PBF) is a potential manufacturing route for the production of tooling using different steel materials. However, there is a limited understanding of how the mechanical properties and microstructures of the L-PBF produced parts vary with change in powder type and process conditions. The current research studied the influence of L-PBF process parameters on mechanical properties and microstructures of 17-4PH stainless steel using gas and water-atomized powders. The results demonstrate the feasibility of using water-atomized powders as starting raw materials instead of typically used gas-atomized powders to fabricate parts in the L-PBF process at high energy densities.

Evaluating The Economic Impacts Of The Legislatively Delayed Provisions Of The 5th Edition (2014) Florida Building Code (Final Report), Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

This research provides an assessment of the potential economic impacts of implementing three legislatively delayed requirements of the Florida Building Code, 5th Edition (2014): 1) residential air leakage testing, 2) residential whole-house mechanical ventilation, and 3) two fire service access elevators for applicable buildings.

Impact Of Heavy Metal Contamination From Coal Flue Gas On Microalgae Biofuel And Biogas Production Through Multiple Conversion Pathways, Derek E. Hess

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Microalgae has a great potential to help alleviate the world's current dependence on fossil fuels. Microalgae is a single celled organism that produces lipids as a food storage device much like humans and animals store fat. These lipids are a kind of oil that when harvested can be utilized as biofuel.

As the technology surrounding using microalgae as a source of biofuel has advanced key bottlenecks in the eventual large-scale production of microalgae based biofuel have been discovered. One of these bottlenecks is the need to cheaply supply carbon for microalgae growth. One idea that has emerged as a plausible …

Microspine Gripping Mechanism For Asteroid Capture, Ezekiel G. Merriam, Andrew B. Berg, Andrew Willig, Aaron Parness, Tim Frey, Larry L. Howell

Student Works

This paper details the development and early testing of a compliant suspension for a microspine gripper device for asteroid capture or micro-gravity percussive drilling. The microspine gripper architecture is reviewed, and a proposed microspine suspension design is presented and discussed. Prototyping methods are discussed, as well as testing methods and results. A path forward is identified from the results of the testing completed thus far. Key findings include: the microspine concept has been established as a valid architecture and the compliant suspension exhibits the desired stiffness characteristics for good gripping behavior. These developments will aid in developing the capability to …

Analysis Of Shock-Plugs In Quasi-One-Dimensional Compressible Flow, Matthew Alexander Thompson

Graduate Theses - Mechanical Engineering

At small length scales, such as in micro-nozzles, the assumption that a shock wave is infinitesimally thin breaks-down due to the thickness of the shock being non-negligible compared to the dimensions of the nozzle. In this thesis, shock waves of finite thickness, or “shock-plugs,” are modeled using the same methods and assumptions as a standard shock wave analysis. Due to the finite thickness of shock-plugs, however, two additional parameters are required in order to account for the differing inlet and exit areas, as well as the pressure on the side walls of the channel. A “typical” micro-nozzle with appropriate dimensions …

Material Evaluation Of A Lightweight, Automated Canned Pet Food Dispenser, Kathryn Marie Carr

Honors Capstones

No abstract provided.

Haul Truck Tires Recycling, Jessica N. Lizarazu

Chemical Engineering Undergraduate Honors Theses

The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers. These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months. Statistics regarding discarded OTR tires are not provided by the …

Mild Traumatic Brain Injury: Combined In Silico And In Vitro Studies, Yi Hua

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Mild traumatic brain injury (TBI) is a significant public health concern worldwide and has attracted significant attention due to high-impact sport as well as improvised explosive devices used in military conflicts. The earliest sign of mild TBI is associated with cognitive, behavioral and physical/somatic changes, which are commonly invisible to existing medical techniques. Thus it is essential to target mechanisms of mild TBI and its associated damage measures for earlier diagnosis/treatment and enhanced protection strategies.

In this work, the mechanism of blast-induced mild TBI was inspected through integrated in silico and in vitro models. A three-dimensional (3D) human head model …