Mechanical Engineering Commons^™

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Keith Landry named ASCE Fellow

Predictive Modeling Of A Paradigm Mechanical Cooling Tower Model: Ii. Optimal Best-Estimate Results With Reduced Predicted Uncertainties, Ruixian Fang, Dan Gabriel Cacuci, Madalina Badea

Faculty Publications

This work uses the adjoint sensitivity model of the counter-flow cooling tower derived in the accompanying PART I to obtain the expressions and relative numerical rankings of the sensitivities, to all model parameters, of the following model responses: (i) outlet air temperature; (ii) outlet water temperature; (iii) outlet water mass flow rate; and (iv) air outlet relative humidity. These sensitivities are subsequently used within the “predictive modeling for coupled multi-physics systems” (PM_CMPS) methodology to obtain explicit formulas for the predicted optimal nominal values for the model responses and parameters, along with reduced predicted standard deviations for the predicted model parameters …

Compositionally Graded Bulk Heterojunction Devices And Methods Of Manufacturing The Same, Jinsong Huang, Zhengguo Xiao

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods are described to form compositionally graded BHJ structures utilizing solvent-fluxing techniques. In implementations, the systems and methods described herein involve a high boiling point additive, a solution of a polymer donor and an acceptor, a substrate material, a working solvent, and a flux solvent for formation of compositionally graded BHJ structures.

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

An Exploration Of Wind Stress Calculation Techniques In Hurricane Storm Surge Modeling, Kyra M. Bryant, Muhammad Akbar

Mechanical and Manufacturing Engineering Faculty Research

As hurricanes continue to threaten coastal communities, accurate storm surge forecasting remains a global priority. Achieving a reliable storm surge prediction necessitates accurate hurricane intensity and wind field information. The wind field must be converted to wind stress, which represents the air-sea momentum flux component required in storm surge and other oceanic models. This conversion requires a multiplicative drag coefficient for the air density and wind speed to represent the air-sea momentum exchange at a given location. Air density is a known parameter and wind speed is a forecasted variable, whereas the drag coefficient is calculated using an empirical correlation. …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Georgia Environmental Conference Research Award

Predictive Modeling Of A Paradigm Mechanical Cooling Tower: I. Adjoint Sensitivity Model, Dan Gabriel Cacuci, Ruixian Fang

Faculty Publications

Cooling towers discharge waste heat from an industrial process into the atmosphere, and are essential for the functioning of large energy-producing plants, including nuclear reactors. Using a numerical simulation model of the cooling tower together with measurements of outlet air relative humidity, outlet air and water temperatures enables the quantification of the rate of thermal energy dissipation removed from the respective process. The computed quantities depend on many model parameters including correlations, boundary conditions, material properties, etc. Changes in these model parameters will induce changes in the computed quantities of interest (called “model responses”). These changes are quantified by the …

Project Daedalus: An Additive Manufacturing Vending Machine, Paul A. Galarnyk, Roxanna Stein, Priscilla Mcdonald, Sky Comarsh White, Matthew Caixeiro, Alexander Seifans, Chris Hays, Benjamin Sallick, Katherine Mcbrayer, Skyler Singleton, Scott Wt Kent

Student Works

The project was a research endeavor focused on designing and building a vending machine for 3D-printed parts. It also had the secondary objective of catalyzing leadership qualities among its membership by emphasizing individual responsibility and forward thinking. The project began in the spring of 2015, when the topic of autonomous 3D-printing was chosen, funding was secured, and the majority of the leadership was brought on. Over the summer and into the fall semester the team developed project requirements and infrastructure, and gathered members from the parent organization. By December of 2015 most of the machine design had been completed, and …

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation in the U.S. is essential for long-term economic growth and mobility, and environmental preservation. Using a non-radial slack-based measurement data envelopment analysis (SBM-DEA) model and state-level data, this study assesses the environmental efficiency of the transportation sector in the U.S. from years 2004 to 2012. In addition to environmental efficiency, carbon efficiency and potential carbon reduction were estimated for the 50 U.S. states. The findings of this study reveal that U.S. transportation sector was environmentally inefficient; U.S. states had an average transportation environmental efficiency score below 0.64. Therefore the states could substantially reduce carbon emissions to improve the …

A Framework For Collaborative Multi-Task, Multi-Robot Missions, John T. Shepard

Engineering Ph.D. Theses

Robotics is a transformative technology that will empower our civilization for a new scale of human endeavors. Massive scale is only possible through the collaboration of individual or groups of robots. Collaboration allows specialization, meaning a multirobot system may accommodate heterogeneous platforms including human partners.

This work develops a unified control architecture for collaborative missions comprised of multiple, multi-robot tasks. Using kinematic equations and Jacobian matrices, the system states are transformed into alternative control spaces which are more useful for the designer or more convenient for the operator. The architecture allows multiple tasks to be combined, composing tightly coordinated missions. …

Evaluation Of The Impact Of Slab Foundation Heat Transfer On Heating And Cooling In Florida, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

The U.S. Department of Energy's Building America Partnership for Improved Residential Construction (BA-PIRC) performed experiments in the Florida Solar Energy Center's Flexible Residential Test Facility intended to assess for the first time (1) how slab-on-grade construction influences interior cooling in a cooling-dominated climate and (2) how the difference in a carpeted versus uncarpeted building might influence heating and cooling energy use.

Flexible Residential Test Facility: Impact Of Infiltration And Ventilation On Measured Cooling Season Energy And Moisture Levels (2016), Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Originally published in January 2014, this revision of the report clarifies and corrects references to Standard 62.2 as the 2013 version (62.2-2013), and it corrects the total CFM requirement for the subject buildings under the standard. Further, two plots have been updated to distinguish between the mechanical CFM and the total CFM required for the subject buildings under Standard 62.2-2013.

Using The Gauge Condition To Simplify The Elastodynamic Analysis Of Guided Wave Propagation, Bhuiyan Yeasin Md, Victor Giurgiutiu

Faculty Publications

In this article, gauge condition in elastodynamics is explored more to revive its potential capability of simplifying wave propagation problems in elastic medium. The inception of gauge condition in elastodynamics happens from the Navier-Lame equations upon application of Helmholtz theorem. In order to solve the elastic wave problems by potential function approach, the gauge condition provides the necessary conditions for the potential functions. The gauge condition may be considered as the superposition of the separate gauge conditions of Lamb waves and shear horizontal (SH) guided waves respectively, and thus, it may be resolved into corresponding gauges of Lamb waves and …

Interactive Training Of Teleoperated Robotic System For Real-Time Mriguided Steerable Needle Intervention, Gang Li

Link Foundation Modeling, Simulation and Training Fellowship Reports

Needle-based interventions, also known as percutaneous interventions, are common approaches for diagnostic and therapeutic procedures including tissue biopsy, delivery of therapeutic agents and tumor ablation. Needle steering, controlling the rotation of needle while inserting, is a clinical technique to produce a curved path to avoid anatomical obstacles (e.g. vasculature and bones) or compensate for placement errors. But, it requires delicate skills and long-term training to accurately steer the needle, due to difficult control of the needle path and lack of intraoperative image feedback. The objective of the proposed project is to develop a clinician-controlled teleoperated robotic system to train and …

The Concentration Of Stress At The Rotator Cuff Tendon-To-Bone Attachment Site Is Conserved Across Species, F. Saadat, A. C. Deymier, Victor Birman, S. Thomopoulos, G. M. Genin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Experimental Investigation On Flow Characteristics Of A Four-Wing Micro Air Vehicle, Lisong Shi, Chunkit Uy, Shih K. Huang, Zifeng Yang, George P.G. Huang, Chihyung Wen

Mechanical and Materials Engineering Faculty Publications

The aim of current research work on micro air vehicles is to realize their autonomous control, i.e. building a library for a lookup table that would apply to micro electronics. In doing so, comprehensive flight tests need to be carried out. In this study, a four-wing flapping MAV is built and a multi-discipline approach is used to design the MAV model. Precision manufacturing technology is introduced here. The finished micro air vehicle has a weight of 8 g and is tested for flight by remote control. The micro air vehicle can perform both hovering and forward flight with high maneuverability. …

All-Metal Structural Color Printing Based On Aluminum Plasmonic Metasurfaces, Z. Li, W. Wang, D. Rosenmann, D. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Technology Innovations And The Financial Services Industry., Olubukola Akinniyi Akinwunmi

Bullion

This article explores the future of the financial services industry in the context of new technologies. Technological innovations were reviewed and likely implications for the industry were highlighted. The article suggests that a symbiotic relationship among new and incumbent financial services providers will benefit the industry. Since technology is re-defining the financial services industry and the global financial system as undergone transformation in the last couple of decades.

Haptic Shape-Based Management Of Robot Teams In Cordon And Patrol, Samuel Jacob Mcdonald

Theses and Dissertations

There are many current and future scenarios that require teams of air, ground or humanoid robots to gather information in complex and often dangerous environments, where it would be unreasonable or impossible for humans to be physically present [1-6]. The current state of the art involves a single robot being monitored by one or many human operators [7], but a single operator managing a team of autonomous robots is preferred as long as effective and time-efficient management of the team is maintained [8-9]. This is limited by the operator's ability to command actions of multiple robots, be aware of robot …

Bioink Properties Before, During And After 3d Bioprinting, Katja Hölzl, Shengmao Lin, Liesbeth Tytgat, Sandra Van Vlierberghe, Linxia Gu, Aleksandr Ovsianikov

Department of Mechanical and Materials Engineering: Faculty Publications

Bioprinting is a process based on additive manufacturing from materials containing living cells. These materials, often referred to as bioink, are based on cytocompatible hydrogel precursor formulations, which gel in a manner compatible with different bioprinting approaches. The bioink properties before, during and after gelation are essential for its printability, comprising such features as achievable structural resolution, shape fidelity and cell survival. However, it is the final properties of the matured bioprinted tissue construct that are crucial for the end application. During tissue formation these properties are influenced by the amount of cells present in the construct, their proliferation, migration …

Realization Of Point Planar Elastic Behaviors Using Revolute Joint Serial Mechanisms Having Specified Link Lengths, Shuguang Huang, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

This paper presents methods for the realization of 2 × 2 translational compliance matrices using serial mechanisms having only revolute joints, each with selectable compliance. The link lengths of the mechanism and the location of the compliant frame relative to the mechanism base are arbitrary but specified. The realizability of a given compliant behavior is investigated, and necessary and sufficient conditions for the realization of a given compliance with a given mechanism are obtained. These realization conditions are interpreted in terms of geometric relationships among the joints. We show that, for an appropriately sized 3R serial mechanism, any single 2 …

Frequency Based Noise Coherence-Function Extension And Application To Passive Bottom-Loss Estimation, Lanfranco Muzi, Martin Siderius, Peter L. Nielsen

Electrical and Computer Engineering Faculty Publications and Presentations

Accurate modeling of acoustic propagation in the ocean waveguide is important to SONAR-performance prediction. Particularly in shallow waters, a crucial contribution to the total transmission loss is the bottom refection loss, which can be estimated passively by beamforming the natural surface-noise acoustic field recorded by a vertical line array of hydrophones. However, the performance in this task of arrays below 2 m of length is problematic for frequencies below 10 kHz" role="presentation" style="display: inline; line-height: normal; word-spacing: normal; word-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px 2px 0px …

The Feasibility Of Utilising Compressed Natural Gas As Part Of A Systematic Approach To Establishing The Necessary Groundwork For The Hydrogen Based Transport Economy, James Brunton, John Howlett, David Kennedy

Conference Papers

One key objective for vehicle manufacturers is to develop technology and infrastructure to facilitate the progression from combustion to conversion by the year 2050. In the short to medium term however, the combustion of fossil fuels such as petrol and diesel, coupled with advanced transmission innovations and emission control technology that are governed by strict Euro VI regulations appears to be the main path forward for the transport sector and the environment. This paper presents the feasibility of utilising the developing compressed natural gas network capabilities as part of a systematic approach to establishing the necessary groundwork for a hydrogen …

Final Report: Cooling Seasonal Energy And Peak Demand Impacts Of Improved Duct Insulation On Fixed-Capacity (Seer 13) And Variable-Capacity (Seer 22) Heat Pumps, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

Previous phase 1, 2, and 3 research identified that duct conductive losses to an attic environment imposed greater relative energy losses for the variable-capacity systems compared to the fixed-capacity systems (Cummings and Withers 2011) because of the longer dwell time of conditioned air in the ducts. The purpose of the Phase 4 experiments reported here was to see if duct R-value enhancement would benefit the overall operating efficiency of the variable-capacity system relatively more than the fixed-capacity system. The current Phase 4 experiments (the primary focus of this report) found that this was a secondary effect.

Scenario Analysis For Techno-Economic Model Development Of U.S. Offshore Wind Support Structures, Rick Damiani, Andrew Ning, Ben Maples, Aaron Smith, Katherine Dykes

Faculty Publications

Challenging bathymetry and soil conditions of future U.S. offshore wind power plants might promote the use of multimember, fixed-bottom structures (or “jackets”) in place of monopiles. Support structures affect costs associated with the balance of system (BOS) and operation and maintenance. Understanding the link between these costs and the main environmental design drivers is crucial in the quest for a lower levelized cost of energy (LCOE), and it is the main rationale for this work. Actual cost and engineering data are still scarce; hence, we evaluated a simplified engineering approach to tie key site and turbine parameters (e.g., water depth, …

High-Frequency Instabilities Of Stationary Crossflow Vortices In A Hypersonic Boundary Layer, Fei Li, Meelan Choudhari, Pedro Paredes-Gonzalez, Lian Duan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hypersonic boundary layer flows over a circular cone at moderate incidence angle can support strong crossflow instability in between the windward and leeward rays on the plane of symmetry. Due to more efficient excitation of stationary crossflow vortices by surface roughness, such boundary layer flows may transition to turbulence via rapid amplification of the high-frequency secondary instabilities of finite-amplitude stationary crossflow vortices. The amplification characteristics of these secondary instabilities are investigated for crossflow vortices generated by an azimuthally periodic array of roughness elements over a 7° half-angle circular cone in a Mach 6 free stream. The analysis is based on …

Quantification Of Frictional Drag Due To Biofouling On In-Service Ships, John Travis Hunsucker

Theses and Dissertations

The purpose of this research was to improve the quantification of frictional drag due to biofouling on in-service ships by advancing the knowledge and methodology used to study the interactions between fouling communities and the surrounding environment. This research examined the influence of hydrodynamic stress on the development and frictional drag of fouling communities that developed on a fouling release coating; investigated the reliability of using ship performance monitoring to detect changes in the hull and propeller condition; and evaluated the feasibility of developing a field deployable instrument capable of measuring the local frictional resistance on a ship hull in …

High-Performance Self-Powered Photodetectors Based On Zno/Zns Core-Shell Nanorod Arrays, Hailing Lin, Lin Wei, Cuncun Wu, Yanxue Chen, Shishen Yan, Liangmo Mei, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

In recent years, there is an urgent demand for high-performance ultraviolet photodetectors with high photosensitivity, fast responsivity, and excellent spectral selectivity. In this letter, we report a self-powered photoelectrochemical cell-type UV detector using the ZnO/ZnS core-shell nanorod array as the active photoanode and deionized water as the electrolyte. This photodetector demonstrates an excellent spectral selectivity and a rapid photoresponse time of about 0.04 s. And the maximum responsivity is more than 0.056 (A/W) at 340 nm, which shows an improvement of 180 % compared to detectors based on the bare ZnO nanorods. This improved photoresponsivity can be understood from the …

Assessing Latrine Use In Rural India: A Cross-Sectional Study Comparing Reported Use And Passive Latrine Use Monitors, Antara Sinha, Corey L. Nagel, Evan A. Thomas, Wolf P. Schmidt, Belen Torondel, Sophie Boisson, Thomas Clasen

Mechanical and Materials Engineering Faculty Publications and Presentations

Although large-scale programs, like India's Total Sanitation Campaign (TSC), have improved latrine coverage in rural settings, evidence suggests that actual use is suboptimal. However, the reliability of methods to assess latrine use is uncertain. We assessed the reliability of reported use, the standard method, by comparing survey-based responses against passive latrine use monitors (PLUMs) through a cross-sectional study among 292 households in 25 villages in rural Odisha, India, which recently received individual household latrines under the TSC. PLUMs were installed for 2 weeks and householders responded to surveys about their latrine use behavior. Reported use was compared with PLUM results …

Minimum Conditions For Visible Mold Growth, G. A. Tsongas, Frank Riordan

Mechanical and Materials Engineering Faculty Publications and Presentations

Considerable confusion and misunderstanding exists over the conditions required for visible mold growth at a surface in buildings. That is evident in papers and articles authored by engineers and other scientists, including various ASHRAE, ASTM and Canada Mortgage Housing Corporation publications. One of the major problems is that many HVAC engineers, building scientists, practitioners and others believe there exists a single critical value of the relative humidity (RH) of the indoor or ambient air well away from surfaces, below which mold will not grow on surfaces. However, that is not the case. The purpose of this article is to clarify …