Mechanical Engineering Commons^™

Hydrodynamics Of Swimming Microorganisms In Complex Fluids, Gaojin Li

Open Access Dissertations

Swimming motion of microorganisms, such as spermatozoa, plankton, algae and bacteria, etc., ubiquitously occurs in nature. It affects many biological processes, including reproduction, infection and the marine life ecosystem. The hydrodynamic effects are important in microorganism swimming, their nutrient uptake, fertilization, collective motions and formation of colonies. In nature, microorganisms have evolved to use various fascinating ways for locomotion and transport. Different designs are also developed for the locomotion of artificial nano- and microswimmers. In this study, we use several different computational models to investigate the behavior of microswimmers.

Microorganisms typically swim in the low Reynolds number regime, where inertia …

Experimentally Validated 3d Md Model For Afm-Based Tip-Based Nanomanufacturing, Rapeepan Promyoo

Open Access Dissertations

In order to control AFM-based TBN to produce precise nano-geometry efficiently, there is a need to conduct a more focused study of the effects of different parameters, such as feed, speed, and depth of cut on the process performance and outcome. This is achieved by experimentally validating a MD simulation model of nanomachining, and using it to conduct parametric studies to guide AFM-based TBN. A 3D MD model with a larger domain size was developed and used to gain a unique insight into the nanoindentation and nanoscratching processes such as the effect of tip speed (e.g. effect of tip speed …

Fracture Analysis In Biomimetic Bouligand Architectures, Nobphadon Suksanqpanya

Open Access Dissertations

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of Bouligand structures and its biomimetic materials. One of the outstanding species with the Bouligand structures is the smashing Mantis Shrimp, Odontodactylus Scyllarus, (or stomatopod) due to its capability of generating high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region, which is mainly characterized by the Bouligand structure. This …

Fundamental Studies Of Flame Propagation In Lean-Burn Natural Gas Engines, Zhiyan Wang

Open Access Dissertations

Lean-burn natural gas engines offer enhanced thermal efficiencies and reduced soot and NOx emissions. However, cycle-to-cycle variability in combustion that can result from unreliable ignition, variability in equivalence ratio and quenching is a challenge. Reliability of ignition can be improved by employing a dual-fuel ignition strategy in which a small quantity of diesel fuel is injected to initiate ignition. Computational studies of n-heptane/methane-air mixing layers are performed to provide insight into the fundamental physics of dual-fuel ignition. The results show that the characteristic time required for steady premixed flame propagation has three components: time for autoignition to occur, time for …

On The Use Of Mechanical And Acoustical Excitations For Selective Heat Generation In Polymer-Bonded Energetic Materials, Daniel C. Woods

Open Access Dissertations

To address security issues in both military and civilian settings, there is a pressing need for improved explosives detection technologies suitable for trace vapor detection. In light of the strong dependence of vapor pressure on temperature, trace vapor detection capabilities may be enhanced by selectively heating target materials by external excitation. Moreover, polymer-bonded energetic materials may be particularly susceptible to heating by mechanical or acoustical excitation, due to the high levels of damping and low thermal conductivities of most polymers. In this work, the thermomechanical response of polymer-based energetic composites and methods for acoustical excitation are investigated in order to …

Photoelectrochemical And Photophysical Studies Of Carbon Nanotube And Molybdenum Disulfide Based Light Harvesting Devices, Hanyu Zhang

Open Access Dissertations

There is a critical need in utilizing solar radiation as a renewable energy source. While photovoltaic solar cells are widely used, much attention has been devoted in the past decade to developing nanotechnology for potential cost reduction and improved device efficiency and reliability. Low-dimensional materials offer unique physical properties which may be exploited for solar energy harvesting and conversion. Understanding their fundamental properties and developing relevant manufacturing strategies will thus pave the road toward high-performance, cost-effective, light-harvesting devices.

This thesis has investigated single-wall carbon nanotubes (SWCNTs) and molybdenum disulfide (MoS2) nanolayers for their light-harvesting ability in donor-acceptor systems. These materials …

Modeling, Optimizing And Testing Thermoelectric Generators For Liquid-To-Liquid Low Grade Waste Heat Recovery, Ali Eyddan Hamil

Masters Theses

The use of thermoelectric generators (TEGs) for producing electricity from low grade waste heat is thought to be a great solution in the future to reduce the power generation cost because of their advantages of reliability and environmental friendliness. Therefore, the current project aims to study thermoelectric generators for low grade waste heat recovery. In this work, a single unit cell of liquid to liquid thermoelectric generator attached with heat exchangers (heat sinks) is modeled using an internal flow. Its optimum design is obtained based on heat sink optimization and the optimal design method. An analytical model of four unit …

Materials, Mechanics, And Patterning Techniques For Elastomer-Based Stretchable Conductors, X. Yu, B. Mahajan, W. Shou, Heng Pan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

A Robotic Device To Assist With In-Vivo Measurement Of Human Pelvic Organ Tissue Properties, Shashank S. Kumat

Mechanical and Aerospace Engineering Theses - Archive

Measurement of the biomechanical properties of human pelvic organ tissue without undergoing minimally invasive surgery is desired for diagnostics purposes and take precautionary actions if needed. The biomechanical properties of the bladder change with age and due to diseases. Thus, identification of the viscoelastic properties of the tissue could help in detecting early stages of the disease in the bladder. A literature survey revealed that no device exists that could be used to characterize the biomechanical properties of the human bladder in-vivo. This research contributes towards the development of a diagnostic system that could be used in a medical setting …

The Influence Of Functional Weights On The Performance Of Least Squares Finite Element Formulation On Hybrid Meshes, Anirudh Rajagopal

Mechanical and Aerospace Engineering Theses - Archive

The Least-Squares Finite Element Method (LSFEM) is a numerical method for solving partial differential equations (PDE) approximately by minimizing the L-2 norm of the PDE residuals. Unlike the more common Galerkin approach, this method does not employ integration by parts to reduce the continuity requirements of the basis functions. Instead, the PDE is cast as a first-order system of differential equations, which allows for the solution of primary and secondary variables with the same order of accuracy. In addition, this approach always leads to a direct minimization problem and therefore not subject to the restrictive inf-sup condition and does not …

Application Of Artificial Neural Network For Evaporative Cooling In Data Centres, Feyisola Adejokun

Mechanical and Aerospace Engineering Theses - Archive

A data center is a facility that may be used to house telecommunication or storage devices. Because of the 24/7 required operation of a data center, large segments of a data center are geared towards evacuating heat generated from operating one. Data centers entail multiple operating configurations, great amount of constraints and nonlinear correlations. The need to effectively optimize a data center operation presents a daunting challenge. The data center considered in this research is a test bed modular data center (MDC). Comprising of an Information Technology (IT), DEC and IEC module. Typical MDC are dynamic and complex in nature …

Shape Optimization Of Helical Coil Tube For Maximizing Heat Transfer, Venkat Manoj Kandukuri

Mechanical and Aerospace Engineering Theses - Archive

Many researchers have observed the enhancement of heat transfer in coiled tubes compared to straight tubes with the same diameter and length. It is known fact, that in a helical coil tube the maximum axial velocity shifted towards the outer wall of the pipe and imbalance between centrifugal forces and inertial loads to a secondary motion of the fluid in the cross-section of the tube. This secondary motion is responsible for improved transport of heat energy to/from the tube walls. Previous conducted Experimental and computational parametric studies show the relationship between the increased heat transfer and parameters such as pitch, …

Self-Transport Of Liquid Drops Through A Functional Mesh For Removing Sweat Away From Skin, Manasvikumar Oza

Mechanical and Aerospace Engineering Theses - Archive

In this work, a functional mesh is developed to transport liquid drops from one side of the mesh to the other. A theoretical model is established, which has been used to obtain three design criteria. Based on these design criteria, functional meshes have been generated and tested with commercially available sponge attached to the mesh. Finally, such a mesh is demonstrated to be effective to remove sweat from human skin. As an application of this research, the concept of this functional mesh solves existing problems with a sport wear. The current sport wear is capable of absorbing sweat, but not …

Thermal Stress Analysis Of Unidirectional Composite Material By Fem Modeling, Gopal D. Gulwani

Mechanical and Aerospace Engineering Theses - Archive

Micromechanics of composite is study of complex mechanism of stress and strain transfer between fiber and matrix within a composite as well as distributions of physical fields inside heterogeneous medium. It was used successfully in predicting accurately physical properties like effective stiffness, effective linear thermal expansion of heterogeneous materials like composite. However, when it comes to strength characteristics of composite especially in transversal direction it failed to predict more accurate results. This thesis is focused on thermally induced stress analysis of unidirectional composite by finite element method. Thermal stresses which are dangerously ignored factor in mechanics of composite usually occur …

Formation Flight For Fuel Saving In Coronet Missions Of Kc-135r And F-15c/E, Christopher Allen Kniffin

Mechanical and Aerospace Engineering Theses - Archive

The fuel saving benefit of formation flight has been demonstrated through theoretical and computational analyses, simulation, wind tunnel and flight tests. When an aircraft flies in a specific region in the wake of another aircraft, it experiences upwash, which results in reduced drag and thus reduced thrust requirement. One specific USAF mission that can potentially benefit from formation flight is coronet missions. In a coronet mission, fighter aircraft are escorted and refueled, as needed, by tanker aircraft over a long range. During the flight, the receiver aircraft fly in formation with the tanker but outside of the wake of the …

Final Design Report: Grasp Data Acquisition Project Axon Vr, Michael Erberich, Jack Schultz, Tyler Yeaman

Mechanical Engineering

No abstract provided.

Final Design Report: Allergen Mixing Assistant (Ama) Micro-Refrigeration Redesigning, Mitchell Parks, Minwoo (Michael) Suh

Mechanical Engineering

Abstract

Allergen Mixing Assistant (AMA) by Xtract Solutions is a device designed to more “effectively refrigerate, organize, and mix allergenic extracts”. Although Xtract Solutions intended the product to be fully automated, the company has decided against its automation and declared its current design as a minimum viable product whose components are too expensive, difficult to source and complex. Therefore, Cal Poly AMA design team - Mitchell Parks and Minwoo Suh - has decided to replace these expensive components with much more economical alternatives as shown below:

Stirling cooler

→

Thermoelectric (Peltier) cooler

Custom Arduino

Controller Card

→

TEC Thermostat *** …

Biofuel Gasification For Residential Heating, Bryan Duke, Courtney Mcintosh, Jeron Hogan

Mechanical Engineering

No abstract provided.

Experimental Characterization And Simulation Of Carbon Nanotube Strain Sensing Films, Nagendra Krishna Chaitanya Tummalapalli

Masters Theses

Carbon Nanotubes (CNTs) have excellent mechanical, electrical and electromechanical properties. These properties led to a lot of novel applications. Due to change in electrical properties under mechanical loading, these composites have potential applications in strain sensors, when these are fabricated as films. CNT-based films are commonly fabricated using different physical and chemical techniques based on the property requirements governing those applications. In this work, CNT films were prepared using wet chemical based methods and chemical vapor deposition techniques.

Plasma chemical vapor deposition using microwave power is used in the first method to deposit films on silicon substrates, using Nickel film …

Analytical Modeling And Numerical Simulation Of A Thermoelectric Generator Including Contact Resistances, Shripad Dhoopagunta

Masters Theses

With increasing demand for energy harvesting systems, research has been conducted in different areas in which Thermoelectric Generators (TEG) find their way into the top of many available resources. Out of many energy harvesting systems available, TEGs are comparatively easier to study, to manufacture and also to comprehend while producing enough energy for applications they find use in. They are solid state devices, meaning; they do not have any moving parts and hence makes them durable. Most of the energy that goes out of the automobile as exhaust is reused to power the TEGs. In most of the works that’s …

Design And Validation Of An Electro-Hydraulic Pressure-Control Valve And Closed-Loop Controller, Jerry Boza

Dissertations

Electro-hydraulic pressure-control valves are used in many applications, such as manufacturing equipment, agricultural machinery, and aircrafts to name a few. They are often used to actuate hydraulic clutches, such as those found in power shift transmissions. A traditional pressure-control valve with open-loop control algorithm is typically used in clutch applications. This scheme often results in inconsistent or undesirable system behavior due to the nature of open-loop control as well as the nonlinear system dynamics and uncertainties.

In this research two new electro-hydraulic pressure-control valves were designed in order to decouple the valve and control port (hydraulic) dynamics. This was achieved …

The Effect Of Process Parameters And Surface Condition On Bond Strength Between Additively Manufactured Components And Polymer Substrates, Bharat Bhushan Chivukula

Graduate Theses and Dissertations

Additive patching is a process in which printers with multiple axes deposit molten material onto a pre-defined surface to form a bond. Studying the effect of surface roughness and process parameters selected for printing auxiliary part on the bond helps in improving the strength of the final component. Particularly, the influence of surface roughness, as established by adhesion theory, has not been evaluated in the framework of additive manufacturing (AM). A full factorial design of experiments with five replications was conducted on two levels and three factors, viz., layer thickness, surface roughness, and raster angle to examine the underlying effects …

Application Of Floating Pedal Regenerative Braking For A Rear-Wheel-Drive Parallel-Series Plug-In Hybrid Electric Vehicle With An Automatic Transmission, Dylan Lewis Lewton

Doctoral Dissertations and Master's Theses

As the world continues to move further away from our reliance on fossil fuels, hybrid vehicles are becoming ever more popular. Braking is a system on both hybrid and normal vehicles that involves a significant amount of power and energy. A hybrid can recapture some of that energy using regenerative braking. In this thesis, a method is devised to blend hydraulic and regenerative braking in the most effective manner. A MATLAB Simulink model was built to simulate a parallel-series plug-in hybrid electric vehicle. The model allows for the implementation of a regenerative brake controller that utilizes floating pedal regen, custom …

An Emg-Based Patient Monitoring System Using Zynq Soc Device, Farhad Fallahlalehzari

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis describes the design, development, and testing of an EMG-based patient monitoring system using the Zynq device. Zynq is a system on chip device designed by Xilinx which consists of an ARM dual cortex-A9 processor as well as an FPGA integrated into one chip. This work also analyzes the performance of image-processing algorithms on this system and compares that performance to more traditional PC-based systems. Image processing algorithms, such as Sobel edge detection, dilation and erosion, could be used in conjunction with a camera for the patient monitoring purposes. These algorithms often perform sub-optimally on processors because of their …

Radiation Therapy And Dosing Material Transport Methodology, Robert O'Brien

UNLV Theses, Dissertations, Professional Papers, and Capstones

A technique is examined here that utilizes high energy beta decays from a short lived radioisotope to treat medical conditions such as shallow cancerous lesions. A major benefit of beta particle interaction in tissue is a fixed penetration depth for the charged particle, with dose limited to the ultimate range of the beta particle. This method improves on some current techniques of radioactive brachytherapy, where "seeds" are placed inside patients through temporary or permanent implantation in order to kill cancerous cells or inhibit growth of tissue. The use of low energy gamma-rays is the most common method of treatment currently …

Ionic Electroactive Polymer Devices: Physics-Based Modeling With Experimental Investigation And Verification, Tyler Paul Stalbaum

UNLV Theses, Dissertations, Professional Papers, and Capstones

The primary focus of this study is to examine, understand, and model ionic electroactive polymer based systems in attempt to further develop this field of study. Physics-based modeling is utilized, as opposed to empirical modeling, to achieve a deeper insight to the underlying physics. The ionic electroactive polymer system of primary interest in this study is ionic polymer-metal composite (IPMC) devices. Other similar devices, such as anion-exchange membrane (AEM) type actuators and flow battery systems are also investigated using the developed model. The underlying physics are in the studies of transport phenomenon for describing the ionic flow within the polymer …

The Effects Of Cryopreservation On Human Dental Pulp-Derived Mesenchymal Stem Cells, Allison Elaine Tomlin

UNLV Theses, Dissertations, Professional Papers, and Capstones

Many studies have demonstrated clinical applications for the use of dental pulp stem cells (DPSC) for the treatment of various conditions. This has driven medical and scientific interest in the collection, isolation and banking of DPSC tissues for research into these potential therapies. Few studies to date have evaluated the viability of DPSC following long-term cryopreservation. The purpose of this study is to evaluate the effects of cryopreservation on dental pulp-derived stem cells (DPSC) viability over a period of three years. Dental pulp-derived stem cells were isolated and cultured from thirty-one healthy teeth. DPSC isolates were assessed for doubling-time and …

3-Axis Automated Probe Traverse For Aerodynamic Testing, Tananant Boonya-Ananta, Ricky Wai, Zander Oostman, Teyvon Brooks

Mechanical Engineering

Our primary objective is to design, build, and test an automated traverse to hold measurement probes in Cal Poly’s low speed wind tunnel. The device should cause minimal flow disturbance. It’s movements must be able to cover eighty percent of the three-dimensional test section. The device should have a mounting point for interchangeable probes. The assembly is to be integrated with the current frame structure on the wind tunnel test section, and should allow very minimal deflection of the measurement probe. The user should be able to control the motion of the traverse via a computer interface which supports automatic …

Revolutionized Additive Manufacturing, Matthew Walker, Winthrop Townsend, Luca Fuller

Mechanical Engineering

No abstract provided.

Haul Truck Tires Recycling, Omkar Bhave

Chemical Engineering Undergraduate Honors Theses

The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers.[1] These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months.[2] Statistics regarding discarded OTR tires are not provided by the …